If I'm not at home I would like the MBP to lock the screen after 15 mins, but not while I'm home. So if my home-wifi isn't detected I would like the "lock screen" to be enabled. Is this possible?
View 4 RepliesI've been running across a bit of a problem with Mavericks of late. Just re-installed it on my MBP too! Â
If I choose Login Window or let the screen turn off/lock, the wifi disconnects while on AC power. Â
I really don't want that to happen as I sometimes need to connect to it remotely to check on the status of a photoshop process, data transfer, etc.Â
I have an unsecured wifi network at home and need to easily share photos between computers. I have an iMac and a couple window based computer.Is ther an easy way instead of using a thumb drive?
Info:
iMac (27-inch Mid 2010), Mac OS X (10.7.3)
I have a belgian azerty keyboard and OS X in english on my white macbook. Is it possible to change the caps lock key's function to shift lock so that it affects the whole keyboard rather than just the letters? I'd like to be able to type numbers without holding shift.
View 3 Replies View Relatedso this has happened twice now in the past month, my mb is in screen saver mode and i wake it up to find that the color is off in the screen. meaning that the color settings changed and the screen has a swashed out blue tint to it. first time i restarted and all was good, second time i clicked on the preferences icon and then the screen went back to its normal setting. my normal setting is not the factory one but one of the ones that people said makes the screen look better.
so what gives, is the integrated chip dieing on me?
oh its a unibody that i got when they first came out, 2.0 processor one all factory
I have an iMac 20'' running Snow Leopard and I want to keep my screen on (to be more specifically, I need to keep it on with a photo on it, always) but when someone moves the mouse or press a key I don't want them to access my computer without entering my password. (like a transparent screen lock app) I think you got the idea, can you recommend me a software that does this?
View 3 Replies View RelatedNote: These are games tested on a MacBook Air with the following specs: 2.13GHz Intel Core 2 Duo, 2GB DDR3 Integrated Ram, 256MB Shared nVidia GeForce 9400M Video Card, Windows Vista SP2 Business x86. This DOES NOT include the Rev. A (1.6GHz/1.8GHz Intel Core 2 Duo, 2GB DDR2 Integrated Ram, 144MB Shared Intel X3100 Video Card) models. Rating scale: 1-5 (FPS Based off lowest possible graphics settings)
1 - Poor/Won't Run. (>10 FPS)
2 - Runs but poorly (10-15 FPS)
3 - Playable (16-25 FPS)
4 - Very Playable (25-40 FPS)
5 - Go crazy (40+ FPS)
Call of Duty 4: Modern Warfare - 5
Call of Duty 5: World at War - 3
Call of Duty 6: Modern Warfare 2 - 5
Counter Strike: Source - 5
Day of Defeat: Source - 5
Colin McRae: DiRT2 - 4
Grand Theft Auto 4 - 2
Left 4 Dead - 4
Left 4 Dead 2 - 4
MotoGP 2008 - 4
Need for Speed Undercover - 5
Sid Meier's Civilization 4 (All expansions) - 5
Sins of a Solar Empire (Includes Entrenchment Expansion) - 5
Star Trek DAC - 3
Star Wars Empires at War - 4
Test Drive Unlimited - 4
X3 Terran Conflict - 4
I use only Wi fi network, when i have finished setup it up it will not lock, also the same with sharing.
iMac OS X Lion 10.7.3
Info:iMac, Mac OS X (10.7.3)
I have had my MacBook Pro now for a little over 2 yrs and I was very frustrated I could not change any print options in any application. I know that the Triangle button expands print options screen but when I do, I have only two print choices. It gave me Standard or Page Attributes in Office and any other App it is Standard and Last used settings. I can't print in Draft, Best or other setting because it does not even give them as a choice. I have two high end color photo printers, Canon i9900 and Epson Photo series and an old HP830 series. Any app I tried to print from and the same thing. I tried to capture the options on the choices but it would not grab that part of the image but here is my screen shot. I searched many forums and I still get the same answer so something else is not letting me change things so I figured best to ask since I am a 20 year win user now switched to Mac. Well right after I posted this question, my wife found the answer. I never though to check the application NAME in the print setting screen. Example, in the screenshot I am using Preview. I never thought to hit the up/down arrow next to the Preview label and wouldn't you know, that is were the quality and several other settings were. I felt pretty stupid that it took 2 years to figure this out but if I posted the answer maybe someone else will not have to take as long as I did to change their print quality!
View 1 Replies View RelatedI have two Airport Expresses running at my house. Both are connected to different types of speakers. Neither speaker set has its own equalizer, and both require a different EQ setting to sound just right. Does anyone know of a way to have iTunes automatically change its EQ setting based on which Airport Express it is streaming to?
View 1 Replies View RelatedIn windows when i type in my second language (not english) and press shift the letter was big.In osx i see i need first change the language and after that press on shift.My question is simple, i can to write something in my language and press shift to make a big letter without change the language and to press on caps lock?
View 1 Replies View RelatedI work with two languages and I would like to configure Caps Lock to toggle between them instead of default Cmd + Space. Of course it's not possible to change it in System Settings.
There's an application called Kirgudu which does the trick, but it's not as responsive as it could be, i.e. when I quickly tap Caps Lock to change the language and start typing immediately, the first letters will be be on the old language and only in the middle of the word it will switch the language to a desired one. This is bearable for me, but still annoying.
So I'm looking for a better solution. I guess it has to be something on a keyboard driver level or very close to it to process the keystroke momentarily. (Btw all the solutions I've tried back in my Windows days work even slower than this only Mac one )
I was using my MBP when I noticed that the display (the built in one) looked a little washed out. To make sure my color profile was set to the correct one, I opened up the display panel in System Preferences. The moment I opened it, the display snapped back to its regular appearance. As far as I can tell, it goes into the washed out version after going to screensaver and coming back, and going into display prefs is the only way to restore it. Anyone seen this before or know how to keep it from doing this?
View 2 Replies View RelatedFor some reason, approximately once a month, the Mac loses the wifi settings. This sends the clock back to January 1st and takes several attempts of reentering the network name and password before it is recognised again.
Also, the wifi settings seem to no longer be part of the keychain when that happens.
This is getting to be a pain. Does anyone know why this happens (it only happens on one of the Macs; others are fine)? What can I do to repair it for good?
I just got a brand new MacBook and I connected to my neighbors network (its ok with them) and now I bought a router and it works but every time I open my MacBook, it automatically connects to theirs and not mine. How can it forget a Network?
View 4 Replies View RelatedI have a MacBook with OS 10.7.4 and use Safari and the Wi-Fi connection to access the internet. The computer will not save Wi-Fi settings from one session to the next. When I start up only the left side of the menu bar is displayed, and does not show the right side containing the connection icons. It will not allow me to access System Preferences, will not load Safari, and will not let me make any configuration changes. When I shut down the computer (some times as many as 3 times) and start up again it shows everything and works OK. The network was created on an iMac which shows everything to be normal.
Info:iMac, Mac OS X (10.6.7)
I have to work with two different Wi-Fi (at home and office) one of which uses DHCP and other requires me to manually enter IP address. Right now I have to keep on changing Wi-Fi settings (putting IP addresses when at office and setting to DHCP at home) whenever I go from home to office and then do the reverse when I go from office to home. Can I automate that so I don't have to repeatedly fiddle with settings?Â
Info:
MacBookPro, OS X Mavericks (10.9.3)
I got a HP Photosmart C4380 all-in-one wi-fi printer and i want to set it up on my wireless network. so i plugged it in to my MBP via USB and ran the HP setup assistant that came with the printer.
at the first step it recognized my printer as being connected via USB the next step when its supposed to detect your wireless network i get this message that says your printer is not connected to the computer, connect via USB to save settings.
I have one mcbook pro running on Lion.
I am using at work a wifi connection that requires fixed ip and specific proxy.
When i go home, i am using another wifi network, so every day i have to change the advanced network settings of my mac.
Is there any way to attribute different advanced settings for each network and save it, so it will be changed automatically?
Info:
MacBook Pro, Mac OS X (10.7.3)
There is a problem of a periodic signal loss. The reason for this is the password reset network settings in the airport. It happens randomly during sleep. The system log says only connect and disconnect from the network. What may be the reason?
Info:
MacBook Air, Mac OS X (10.7.3)
I just downloaded the PhotoSync app onto both my iPhone 4 and MacBook Pro (Snow Leopard). However, when I try to use PhotoSync to sync all my photos from my iPhone to my MacBook Pro, I get an error message telling me to check my wifi settings - even though both of my iDevices are connected to the same wifi network. I get the same error message when I try to use PhotoSync to sync the pictures from my iPhone 4 to my iPad 2, as well.
View 9 Replies View RelatedI shut down my imac and when I went to restart it, I can't get it to get past the grey screen.I can't even get to the apple screen.I have unplugged everything and nothing works.
Info:
iMac, Mac OS X (10.7.3)
I have a first gen Mac pro, I am getting a sporadic lock up where the screen freezes, and it stops responding to keyboard and mouse input (and it becomes inaccessible from the network). This has happened in normal use twice.
I have tried several times to run the Apple Hardware Test off the original Os X disk, but it locks up up every time in that mode. It also locks up immediately when I boot into single user mode (which I did in order to attempt to run memtest). At least it refuses keyboard input in Single User (with my normal bluetooth keyboard, as well as a USB keyboard that I borrowed).
I did run memtest from a terminal window while logged in normally, and it was able to access 11 of my 12 gigs of RAM, and it passed, so I guess I am 11/12ths sure it is not bad RAM.
When the system does lock up, when I do a hard power cycle with the button on the front of the machine, it will not reboot -- my screen remains black. If I let it sit for a minute or two like that, then power cycle again, it does boot up normally. This is very consistent on these lockups - no boot the first time, works fine the second.
In general, I think it is running hotter than it used to -- at least it seems like the fans are running at high speed more than they used to, but I can't swear to, or quantify that.
I was on the phone with Apple tech support for about an hour yesterday, and he finally decided it had to be taken in for service.
I wanted to see if anybody here has any ideas what the problem might be, especially if it is something I could fix myself, before I lose the machine for however long it will take Apple to fix it.
Does OSX has a keyboard shortcut as linux (CTRL ALT L) to lock the screen? Unfortunately, OSX doesn't require password to return after a display sleep. It only requests password after sleep. I need a keyboard shortcut to solve this problem or a screensaver with sleep display function.
View 15 Replies View RelatedMy Hard drive crashed, I installed a new harddrive and put my OS disk in and hit the options tab..All I get is a Grey screen with a picture of a lock and a place to put a password. I have tried all my passwords and nothing... I have a Time Capsule with data back up and I was told that you put the OS disk in and go to utilities then selct the time machine and it should restore from there..
View 4 Replies View RelatedI want my kids to have abot 30 minutes on the computer. After that time the screen saver should automatically come on and needs to have a password lock just like the normal screen saver.
View 2 Replies View RelatedJust bought a new macbook air; set it up with English as the language and region etc. however, the lock screen is in another language.Â
Info:
MacBook Air, OS X Mavericks (10.9.4)
How can i change my RSS settings? my RSS is set on Washington Post right now but i prefer google news, but i can't find a way to change it.
View 4 Replies View RelatedI have a Time Capsule wirelessly connected to my iMac. Since I've encountered some problems with backups because of intermittent wifi connection failures, I want to switch to a wired connection with an ethernet cable. I know I could fiddle with the wifi channels etc. but since the TC is just sitting next to my iMac anyway, I could profit from the higher bandwidth of a wired connection as well.
Two questions:
1. What exactly do I have to do to make the switch? Are there any new settings I have to apply? Create a new network?
2. Will I still be able to use the wifi connection to get on the internet using my smartphone?
As I use the web I often use shift + apple + 3 or 4 to take screen captures of things I like and want to remember.
This saves the file to the desktop. Is there a way to change the save location?
Also I've been then adding the clippings to a PS file but this is getting to time consuming and dull to manage.
Is there a better option?
I do really like the way I dont have to use another application to take the screen shot but there is no management...
