Is there any way I could install Windows 7/Vista/XP on my MacBook using Bootcamp, but install the Windows OS on an external hard drive instead of my internal drive? I hope this is making sense.
View 13 RepliesBack on 10.5.5 and below, I was able to install Windows with Boot Camp and my External DVD Drive - My Internal SuperDrive is in the jelly and won't work. But on 10.5.6, Windows decided to give me licensing problems after I tried to use it with VMWare Fusion 2.0. So, in temper I deleted the partition in Boot Camp Assistant.
On the creation of a new, bigger partition for Windows 7 Public Beta, I found that I could no longer use my External DVD Drive to install Windows in Boot Camp.
So, now, Apple has pretty much forced me to come and get the SuperDrive fixed ($65 for a QUOTE, and Over $150 to get the thing fixed) if I want to install Windows onto my Mac.
Can i Boot Leopard From an External USB Based Harddrive ?
the harddrive is powered with an external power supply and is not bus powered...
is it possible to have boot camp and have the windows os stored on a usb/external hd?
View 2 Replies View RelatedI have my Macintosh HD (which I access often) and then the Untitled BootCamp HD (which I never access when I'm using the Mac OS... there's not point).
Would it be possible to move the Untitled BootCamp HD icon so it's off my desktop? Can I just put it in some other folder or put it in my Macintosh HD folder?
Sorry I know there are ways like using mac drive to do tis but it wouldn't work on my windows. I want to be able to browse my Mac hard drive while using Boot Camp, I have Windows 7 installed on Boot Camp.
Is this possible?
I recently installed Boot Camp with Windows Vista. i partitioned the drive 50-50 and now i am running out of room on both partitions.
I am familiar with Ghost on the PC side but is there a software that will CLONE my Mac partition and Windows partition all in the same process? When i go to Disk Mangement in Vista, it recognizes four partitions. 1 for vista and the other 3 for Mac.
I just recently upgraded my Santa Rosa Macbook Pro's hard drive to a Western Digital 320GB 7200RPM drive. So far it's working great. After I installed the hard drive I ran a benchmark (xBench, newest version) and my score was around 128-133 on average.I went ahead and installed Windows 7 via Boot Camp. Everything's working great. Bit later I ran xBench again. My scores tanked (specifically in the hard drive department). Overall score is around 80 now. What the hell happened? Could the partition/Windows 7 install caused an issue? I've ran Disk Utility and the drive is reporting that it's okay. And in terms of actually using it (opening programs, etc) it seems just as snappy.
View 2 Replies View RelatedI'm building a custom computer that I would like to run both OSX and Windows 7 on. At the moment I am trying to decide between installing 1 2TB hard drive or 2 1TB hard drives. I would preferably do the latter since I would like each OS to be on its own drive. OSX will be my primary OS. If I go for the 2 drive option they will be 2 seperate drives, not in a RAID config. Getting OSX onto the machine is simple enough for me if not a little roundabout. My main concern is Windows 7. Will bootcamp allow me to install Windows to it's own dedicated drive without having to partition the OSX drive? In my case would I even need to use bootcamp? Would holding down the "alt" key as done with bootcamp detect a second bootable disk even if Windows was not installed through bootcamp?
View 3 Replies View RelatedI was repartitioning my hard drive in Boot Camp prior to installing windows xp, but changed my mind after I had chosen to partition in fat32 and did not complete the process. Now my hard drive sees itself as partitioned and I cannot use Boot Camp to install Windows XP. When I try using Boot Camp again, I get the message :
"the startup disk cannot be partitioned or restored to a single partition. Backup the Disk and use Disk Utility to fromat as Mac Os..... Restore your info to the disc and try using Boot Camp again...."
My question is: is it even possible to reformat the hard drive from fat32 to nfts? I am new to MAC switching from Windows and wanted to install an embroidery software.
After deleting windows 7, I went back into boot camp to merge partitions and after that operation completed, the 32gb of space that was used for the partition was gone. I tried using the disk utility to find second partition but can't, it only recognizes the partition that mac osx is on and says it is 120gb capacity when hard drive is 150 gb. I would like to format the entire hard drive and have it as one partition again
View 10 Replies View Relatedis there i can delete the boot camp portion of my hard drive ( tried putting windows on the other half, but its more of a PITA uploading all the drivers) is there a way i can remove the boot camp portion of the hardrive without loosing everything on my mac hard drive?
Info:
Mac OS X (10.7.3)
My OSX partition shows up fine in my Bootcamped Windows 7 x64, and I can read/write to it fine. My external, a Western Digital 1tb drive formated HFS+, is connected thru firewire, and it doesn't seem to mount or show up at all.
View 3 Replies View RelatedIs it possible to install windows 7 on my macbook from a removable hard drive using boot camp? How would I do this?
Info:
MacBook, iOS 5.1
Running a 2010 MBP Core i5 2.4GHz. I had Windows 7 originally installed. Gave me wireless problems and I gave up. Erased the partition. Installed Windows XP and everything was fine.
I got a new copy of W7 Professional x64. I installed it "over" the existing XP, though it erased the partition anyways (I don't care about that).The new 7 install has been giving me the same wireless problems. I downloaded and installed the Broadcom driver. Gave me a BSOD and restarted the computer. Now I have a BSOD on start up, too. On the OSX side of things, it no longer shows any Boot Camp hard drive. It doesn't recognize it at all. Though when I hold the option key on boot, it still shows the Windows install.
1. How do I fix the BSOD problem? (All caused by installing the driver)
2. Where the heck is the Boot Camp hard drive/partition?
I recently got rid of a partition I had made for bootcamp since I never use it, and would rather have the space back. I deleted the partition through disc utility, and then through the partition tab, tried to get back that space by dragging down the tab to restore the space originally set for the partition. When I go to apply this change, it notifies that my hard drive will be re-sized. I accept and then a few minutes later it comes back with the error "Partition failed with the error: Filesystem verify or repair failed" Does anybody know how I can restore this space successfully back into my main hard drive? I've attached some screenshots
View 10 Replies View RelatedMy internal 1TB hard drive on my iMac is dead and I don't have the money to replace it at the moment. I have everything backed up on an external 1TB drive using Time Machine. As a workaround for the time being,Is there any way I can install the system on the external drive and use that as the boot drive without erasing the Time Machine Backups? It seems to me I would have to have two partitions for the external drive, one for the system, and one for Time Machine. But is there any way to add a partition without erasing the existing one with Time Machine only on it?
View 8 Replies View RelatedSorry if I am in the wrong forum, as you can guess im a newbie at the forum - not at computers though (6 years experience.. )
So I have a 1TB WD Hard drive USB and I copied the Leopard Disk image and restored it onto it in a 500GB partition.
I have tried to boot it up normally by holding down Alt on start up but the drive doesn't come up. Ok.
I have tried going into the Start up Disk, it comes up and when I click on it and click restart it doesn't restart, it just does that Mac Beep thing.
I have recently just tried to boot it up manually using the Open Firmware technique. It doesn't work.
I have a PPC Mac and I know that they can't normally boot up USB Drives but the other users which I read on the thread how to boot up by the Firmware technique said they're PPC and it worked.
I just wanted to format my computer, My leopard disk is gone now but I got it copied JUST IN TIME to my Hard drive.
I formatted my computer and now i'm stuck on Tiger.
I want to make a bootable clone of my iMac (PowerPC G5 running OS 10.5.8) and also backup my MacBook Pro onto an external USB hard drive so that I can restore from the external hard drive if my iMac dies (which is beginning to have startup problems).
I was planning to create 3 partitions - one for iMac's data which I'll continue to backup using TimeMachine, one for my MacBook Pro's data and one partition as a bootable clone of my iMac.
My question is.... if my iMac dies, how do I use the external hard drive to boot up from? Do I need Carbon Copy Cloner or will I be able to boot up from the external hard drive and access Apple's Disk Utility?
I have a unibody MacBook. Is it possible to install Mac OS X on a USB external hard drive and use that to boot?
View 3 Replies View RelatedMy imac G5 isight's hard drive is dead. I would like to install OS X on an external hard drive and just use that as the hard drive for this machine. My questions are:
Can I boot from an external hard drive via USB and just run everything off the external hard drive? If so, how should I format the external hard drive so that it can be selected and written to when I boot from the install cd? The external hard drive I would like to use is a 75 gig Acom. I've tried booting from the install cd, and it either won't even find the external hard drive, or, when it does, it says it can't write to that external hard drive.
Is it possible to boot from an external Firewire DVD Drive? It certainly isnt from an external USB DVD. Real answers only please, not "I think so" ones based on HDDs or rumours you may have heard!...
Background:
I've got an MCE Optibay in my Mid-2010 i7 MBP. When installing Bootcamp it refuses to install from the external USB DVD drive. In the end I pulled the 2nd HDD out and reconnected the internal DVD. It then worked fine without a hitch. Then I reinstalled the 2nd HDD and all was fine for a few days.
Now I want to resize my Win7 partition (bigger, as MS Visual Studio's bigger than I thought, and I might stick some games on). I can shrink the OSX partition fine with Disk Utility, but windows won't grow the Win7 one because the empty space is before the Win7 partition, not after it. Apparently this can be done with GParted. Guess what? I can't boot the Linux based GParted CDROM from the external USB DVD drive! So, will a Firewire one work where USB fails, and solve my alternative OS booting issues? If I buy one I can then either use GParted, or delete the Win7 partition and start again without having to pull the laptop to bits all over again, only to put it back once I'm done, and possibly have the same issues in the future. Obviously I don't want to blow extra money getting a Firewire DVD drive though if it's a waste of money...
I've been hearing good things about the Spinpoint Drives and the 750GB ones are coming down in price.Here is my current setup1 - 500MB Drive - Leopard2 - 320MB Drive - Vista 643 - 500MB Drive - FAT32 (Shared, Irrelevant)I plan on replacing drives 1 and 2 with 750GB Spinpoint drives.My question is, can I boot off of the Leopard dvd and put in Drive 1 and NewDrive1 and just clone it, and do the same for Drive2 and NewDrive2 and clone it? And then go into Leopard and resize the HFS partition, and go into Vista and resize the NTFS partition?
View 2 Replies View RelatedI have an Intel iMac with with Snow Leopard and Windows 7 on separate partitions. Recently I have acquired an external USB hard drive. I formatted it with Ext4, and installed Linux Mint to it.
The installation went smoothly, but I can't seem to boot from the USB drive anymore. Holding down Option on start-up only gives me two choices: Mac OS X and Windows. The drive isn't recognized in either operating systems anymore: on Snow Leopard I get "The disk you inserted was not readable by this computer" and on Windows, it doesn't even show up in My Computer.
FYI - Im typing from an iPhone.
No hard drive, won't boot from external Fire Wire drive..
I've tried all key combos
I have owned a Mac Mini for three years now (my friends convinced me to try the Apple way and this is my first Mac). The CD/DVD died just three weeks after warranty expired and Apple said (in essence) 'tough crap...you didn't buy AppleCare'.I have functioned without a CD/DVD drive since then, and everything was fine... until a week or two ago. We installed an update in iTunes, and everything started running S...L...O...W... So, we rebooted the computer! Instead of rebooting, it made the "bong!" sound and then a screen with an apple and a spinning wheel runs indefinitely. We let it run all night the first time and it stays on that screen for as long as you let it.
View 11 Replies View RelatedI want to know, is there any specific way possible I can set up my external hard drive so that when I plug it in, it mounts as an image file? So say I have a file "Image.DMG" on my desktop, I want to make it so that my external hard drive "becomes" Image.DMG, so when I plug it in, that's what it mounts as. I would like to do this because I want to make a boot image using my external hard drive.
View 5 Replies View Relatedim in the market for a macbook and when i get iot i want to put windows on an external hard drive and use that to dual boot. is this possible? i am new to macs so i know nothing about it.
View 4 Replies View Relatedto run ppc g4 powerbook from external hard drive with apps from external hd drive intel imac g5? I have a firewire hd but it is not being recognized by the ppc.
View 1 Replies View RelatedTwo years ago I installed Leopard on a pair of striped Fantom Hard Drives (3TBs) via Firewire 800, and have been running my 2007 Macbook Pro off it ever since. When Snow Leopard came out, I updated it with no problems. When Lion came out, again no problems. Last month I bought a CalDigit VR2 with dual hard drives (4TBs) specifically built for running OS externally. But no matter how I configure, install, or connect... it will not boot up my Macbook Pro, or my Macbook Air.
Last week I bought a new Fantom external hard drive (1.5TBs) and discovered the same exact issue, with one exception... the Fantom will boot the Macbook Pro via USB 2.0, but only when plugged into the left side port.
Has anyone else noticed this change?
P.S. I've talked to the people at CalDigit, Fantom, and Apple, and no one seems to have an answer.
Info:
MacBook
Pro, Mac OS X (10.6.7)
