Aperture :: Unable To Change Dates Properly

Aug 23, 2014

I would like to be able to sort them by the date I think they were taken, so I need to change the dates of the files to specific dates. I want to be able to do groups at a time. Like all photos taken on a birthday, and for pictures I do not know the date for, dated to the date the person in them died. 

When I click on a group of photos Aperture changes the dates in a relative fashion rather than an absolute fashion. IE If I scanned the images that were taken on the same day but were scanned 2 months apart, the date that appears on one is correct, the other 2 months off. I would like to change the dates to specific day in time.

Info:
Aperture 2, OS X Mountain Lion (10.8.2), with aperture 3 upgrade disk

View 10 Replies


ADVERTISEMENT

Aperture :: Can't Correct Picture Dates

Dec 8, 2014

I have a 25K Aperture library that I've transferred from computer to computer over the years.  Lately I have notice that a few picture have changed dating.  When I try to correct the date I get a splash screen saying that I can't continue because the picture is locked or I don't have permission.

Info:
iMac, OS X Yosemite (10.10.1)

View 4 Replies View Related

Applications :: Office For MAC Excel - Dates Change By Plus / Minus 4 Years

Oct 14, 2010

I have office loaded on my Mac. I work with a variety of spreadsheets and different applications like Open Office, Access, Excel. Most of my data comes from applications on the PC side. When using Office for Mac, I open a new Excel spread sheet and copy and paste data from one of the other applications. So I have a column of dates in Open Office, I copy the date column and paste into Office for Mac Excel.

When I do this the dates change by plus or minus 4 years. So if I move data labeled 10/8/2010 when I paste it into Office for Mac Excel I get 10/8/2014 or 10/8/2006. Sometimes I even get a different month or day along with the plus or minus 4 years on the year. When I move the data into Office for PC Excel I don't have the problem. The dates copy over just fine. I am not using date formulas or functions. It is simply dates put into the column that I am trying to copy into a single spreadsheet.

View 3 Replies View Related

OS X V10.7 Lion :: Did Finder Change Some Modification Dates When Making A Copy?

Jun 8, 2012

I just copied a very large number of files using Finder and I discovered that some modification dates were changed.  For me this wasn't a problem, but it's strange and I don't understand why it happened.  I wonder if anyone else has seen a similar behavior.  Here are the details: 

I have a Mac Pro running under OSX 10.7.4 with 15 GB of RAM and 7 hard disks.  The disks details are as follows: Internal 1 is 500 GB and came with the computer.  It is my boot drive and has a variety of material.  It's about 75% full. 

Internal 2 is 1 TB.  It has OSX 10.6.8 on it for use as a repair disk if I need to run TechTools against my main drive or if I need to run SpringCleaning.  It is about 85% full and contains mainly videos of one type or another. 

Internal 3 is 2 TB.  It is 98% full and contains mostly .jpg files.  This drive has a single root folder with 3-4 levels of subfolders.  Some subfolders have as many as 5000 folders in them.  The bottom level folders each have anywhere from 20 to 300 files. 

Internal 4 is 3 TB.  It was purchased last week because drives 2 and 3 are getting full.  My intent is to copy drive 3 to 4, then copy the data from 2 to 3.  I'll probably retire 2 since my SMART checks are showing problems. 

External 1 is 3 TB and is used only for Time Machine to backup internal 1. 

External 2 is 4 TB and is used to backup Internal 2 and 3 using ChronoSync.  I'll be changing this to 3 and 4 soon. 

4 days ago I installed drive 4 and used Finder to copy the root folder from drive 3 to 4.  That took about a day.  I then ran ChronoSync in Trial Sync mode to see if everything was OK.  (Perhaps I shold have used ChronSync to make the transfer.)  I discovered that about 8,000 files had discrepancies.  I wrote a simple AppleScript to identify any meta data differences between the files on the two drives.  It's been running for about 12 hours and I suspect it will take more than a day to finish.  So far all that script has found are modification date differences.  I've examined about a dozen of the files and they look OK. 

Anyone seen anything like this?  Any ideas what happened?  I have three user accounts on this Mac Pro.  The copy was made in one account with nothing else running, but I was doing a variety of work in another account.  The third account was not active. I just did a better search of this forum and discovered a similar case from 2010.

View 1 Replies View Related

OS X V10.7 Lion :: Unable To Access Older Backups / Dates

Feb 28, 2012

At first (all of a sudden out of the blue) I could not enter Time Machine mode for love or money despite clicking on the enter time machine action botton, however I could run a 'backup now' at any point and this appeared to go through as well as the hourly automated ones. Then switching Off then back On Time Machine suddenly allowed me to enter Time Machine; however I am only able to access the finder windows for any local 'white tick' backups which in my case were only for the last several snapshot backups for today... but if I try and access any dates after this right back until November 2011 last year, nothing happens at all and the date/backup markers are completely unaccessible. Incidently, all of these previous 'purple tick' date markers (time machine backups/snapshots on external firewire 800 drive) were accessible before, but know they can't be accessed even though they corecctly index the appropriate dates right back until November.

I'ts worth pointing out that I've had many glitces and random problems since using a Thunderbolt Display which is where the external hard-drive containing the time machine backup is hooked up to. A seperate recent issue is constantly losing sound on the Thunderbolt Display which requires a reboot to get it back temporarily, but this is a seperate issue but may be related if the cause of a number of problems may be originating from the TD.

The external disk drive containing the time machine backup image, appears to be online ok as I'm able to access the drive in a normal manner. Has some kind of special links nature or association relasionship between the Time Machine program and the external drive and backup disk image contained on it been disrupted or broken? If this is the case, can they be re-linked or re-associated?

Info:MacBook Pro 17, Mac OS X (10.7), MacBook Pro 8,3 - Intel Core i7 2.2

View 2 Replies View Related

Applications :: Unable To Use IPhoto Calendar - ICal Dates Are Wrong

Nov 30, 2010

I'm trying to order a calendar in iPhoto '11 for my grandmother. I've did this as part of her Christmas gift the last three years. I added everyone in my family's birthday into an iCal calendar years ago.

View 1 Replies View Related

Aperture :: Undoing Batch Metadata Filename Change

Aug 31, 2014

I accidentally renamed all the file names on every single one of my 24000 photos in aperture using batch change ( keywords, metadata etc) Can I undo this action or will I need to restore from an earlier time machine/capsule backup? Undoing a batch metadata filename change in Aperture3?

Info:
Aperture 3, OS X Mavericks (10.9.4)

View 5 Replies View Related

Applications :: Aperture Unable To Uninstall?

Oct 18, 2010

I tried to install Aperture, after I have done a complete uninstall, but the install process does not go any further than hitting the ok button after entering Name/Company/Serial. The rainbow colored circle remains on forever, so I have to force quit every time.

I wonder, if I deleted any important install files form OSX accidently?

What I did was uninstalling Aperture: I searched for 'Aperture' in the Finder window, and deleted all files which showed up!

View 5 Replies View Related

Applications :: Unable To Get Aperture 3 To Work With GPS Log Files

Feb 21, 2010

I haven't been able to get Aperture 3 to work with any GPS log file. And I mean anything. Not CSV, KMZ, NMEA or GPX files. Either they are not read at all, or they are read halfway and crash the program. I'm using a Columbus V-900 which produces weird CSV files, but seem to export fine using TimeAlbum to basically any format I want. Maybe a software update soon to make this feature work better?

View 6 Replies View Related

OS X V10.7 Lion :: Unable To Open IPhoto, Aperture Or FCE?

Apr 7, 2012

Since a couple of days, I'm unable to open photo applications such as iPhoto, Aperture or FCE. I'm getting the same king of error report as below. I've tried all kind of solutions from the web but still no solution. I wonder if someone would have the missing file (Library not loaded: /System/Library/Frameworks/CoreText.framework/Versions/A/CoreText) and could send it to me? The whole folder CoreText.framework is even missing. I have a MacBook Pro 15" mid 2010.

Process:         iPhoto [13430]
Path:            /Applications/iPhoto.app/Contents/MacOS/iPhoto
Identifier:      com.apple.iPhoto

[Code]....

Info:
MacBook Pro (15-inch Mid 2010), Mac OS X (10.7.3)

View 13 Replies View Related

Aperture :: Unable To Copy Photos Onto Disc

Aug 23, 2014

I have a recuuring problem with my Macbook. I have taken it into the mac store on countless occasion because of faulty Disc drives/optical drives. I am trying to burn a disc of photos and have done all the correct steps but this message continually appears. Last time this happened it was a system issue and I had to re-download mavericks. whether this is the case again 

Info:
macbook

View 5 Replies View Related

OS X :: Unable To Eject / Unmount External HD Properly

Dec 10, 2008

My external hard drives simply refuses to eject/un-mount, and I've done everything I can think of to terminate any processes and/or applications that may be using the drive and preventing it from being ejected properly, but I haven't had any success. Is there some Mac-Jedi way of going about isolating what might be preventing this drive from ejecting properly? I've scoured the activity monitor but can't figure out what might be preventing the drive from ejecting?

View 6 Replies View Related

MacBook Pro :: Unable To Shutdown Properly Or Sleep?

Jan 17, 2010

I go to shut it down from the apple menu, it attempts to go through all the stages needed for a shut down, the screen goes black like normal, and then it restarts again (so, while, it nearly gets to the end of shut down, it never quite makes it, and starts up again!) The same thing happens when I decide to restart - there is no pause between shutting down and restarting, indicating that it does nor restart at all.

It does not sleep either. I put the lid down and everything is still going inside the laptop!

I hope that's a good enough explanation of what's happening!

The only way I can shut the computer down is by pressing the power button in the top right hand corner of my macbook - forcing a shut down.

I've tried resetting the PRAM and repairing disk utility but it has done absolutely nothing.

View 8 Replies View Related

Intel Mac :: Unable To Find Aperture Library When Set Up Wallpaper

Feb 15, 2012

This has stuggled me for around a year, ever since i upgrade to lion when it is available, i found its hard for me to change my wallpaper to the images located in my aperture library.It's simplely not showing up as a available option in the preference panel desktop image section.   

No offense, but dont tell me to do the repair disk, repair permission thing, or change the preview as "always" in the sharing section.   

This is what i've done: 

1>I've done format the entier hard drive "7 pass erase" around 3 times

2>Fixed the permission, repaired disk, runned daily weekly monthly script for thousands of times.

3>Reinstalled the OS thousands of times.

4>Repair Permission, Repair Database, Rebuid Database for Aperture 3 thousands of time.

5>Runned ACL repair under recovery mode 3 times in Apple Terminal.

6>Called Apple Support, reached to 3 different senior technicients

7>Done the research online

8>Tried everything i can. 

I like photography, and i have a 70G aperture library. now i can only export the image into a folder and choose the image from the folder to do it. I know I know, It's not a big deal, just wallpaper. I'd done some programing for 2 3 years. It's kind of a habbit for me to debug the thing, i feel like this is issue for me, which makes me uncomfortable.

Info:
iMac (27-inch Mid 2011), Mac OS X (10.7.3)

View 5 Replies View Related

App Store :: Unable To Download The Latest Aperture Update?

Jun 19, 2012

I was unable to download the latest Aperture update because I do not have OS 10.7. I want to delete the red App Store reminder. I tried to do this using the "reset all warnings" button in My Account/Settings but it has not worked, even after a restart. (other than taking the App Store icon, and the annoying reminder, out of the dock, which I have done)?

Info:
Aperture 3, Mac OS X (10.6.8)

View 1 Replies View Related

Aperture :: All Of A Sudden Unable To Open Version 3.0 On IMac OS X 10.6.8

Sep 12, 2014

I am unable to open Aperture V3.0 on my imac OSX 10.6.8. I have the DVD installation with serial number ...

Info:
iMac (27-inch Mid 2010), Mac OS X (10.6.8), APERTURE V3 software???

View 3 Replies View Related

MacBook Pro :: Battery Calibration - Unable To Properly Sleep

Dec 2, 2009

I have a 30 month old MacBook Pro (the SantaRosa line from June 2007)... And was still using the original battery up until 3 days ago. Its capacity suddenly dropped from 83% down to 45%, so I took it to an Apple store, they did a diagnostic, and without question told me the battery was defective, and just gave me a brand new battery with only 1 loadcycle on it. So today I decided to calibrate it, had it charged up, unpulgged it and let it run until it was 'supposed' to go to sleep... It had 0% left on it, the screen shut off, and the sleep light was just starting to dim, when I heard the hard drive go . (As if one pushed and held the power button, aka hard shutdown).

It seems it didn't have enough reserve capacity to let it go to sleep, so instead of waiting the 5 hours (as it wasn't sleeping, and pressing the button on the battery showed no lights at all), I decided to plug it in right away. Would it be a good idea to calibrate again, or simply wait a month or so and do it again then?

When I turned the computer back on, it didn't even resume at my desktop, so not only did it not get to sleep properly, it didn't even have a chance to write the memory to the hard drive, and now the actual battery capacity in Coconut battery is showing up 95%, 5253mAh

Just curious, as 30 months ago when I first got my original one, it calibrated properly and didn't completely die when it got to reserve capacity...

View 3 Replies View Related

Applications ::using IPhoto To Aperture Migration Unable To Import Faces?

Feb 10, 2010

I'm migrating from iPhoto '09 to Aperture 3 and noticed it doesn't import learned faces! I have over 130 learned faces in iPhoto and DO NOT want to have to manually re teach Aperture who everyone is. Why didn't they set it up to migrate the faces library as well?

View 1 Replies View Related

Aperture :: Unable To Import Master Files From Memory Card

Jun 3, 2014

As always I wanted to add a new project with incrementally new RAW files from my SD memory card. I have the photo management system the image master files (RAWS) are stored in Pictures folder on the HDD. The import dialogue enables to select a destination folder to Pictures as usual, but it doesn't show Move or Copy files option anymore. Without this, it just imports images as referenced images to the ones placed on the memory card, which I subsequently can't format, because, I'd lost all the photos. Move or Copy files option shows up when I pick other import source than memory card, eg. my HDD. I tried everything, can't figure this out. I find Aperture unreliable now and will move to Adobe Lightroom, if won't find a solution.

Info:
Mid-2009 Macbook Pro running Mavericks 10.9.3, Aperture 3.5.1

View 5 Replies View Related

MacBook :: Trackpad Not Working Properly - Unable To Open Apps

May 13, 2012

My Trackpad on my MacBook isn't working properly. I can move the arrow around the screen but I'm unable to open any applications. I plugged in a mouse and it works fine. The trackpad settings in system preferences seem fine, I didn't spill any liquid on it and didn't let it fall.

Info:
MacBook

View 1 Replies View Related

Applications :: App Store/ Upgrading From Aperture 2 To Aperture 3

Jan 6, 2011

I noticed that Aperture 3 is priced really, REALLY low on the Mac App Store. So I made the decision to buy it. But... I already have Aperture 2 installed. So what happens when I buy Aperture 3? Does it recognize that I have Aperture 2 installed, and upgrade it, or will it install Aperture 3 alongside Aperture 2?

View 3 Replies View Related

OS X :: Viewing Aperture Photos Without Opening Aperture?

Feb 9, 2009

Is there a way I can access my entire aperture library without opening the actual program? If so, how can I do this.

View 6 Replies View Related

Safari :: Selecting Dates From Several Websites

Mar 25, 2012

Attempting to select dates from several websites results in an error in Safari (not Chrome or Firefox) in which all months are listed as January. I have this problem on two macs running Safari 10.7.3. E.g. [URL]

Info:
MacBook Air, Mac OS X (10.7.3)

View 4 Replies View Related

OS X :: Date And Time Not Displaying Properly / Unable To Set Eastren Time

Jun 30, 2010

We got a refurbished Alu MB for an intern and the time is not displaying properly. If I check the "Set date & time automatically", the digital and analog clock is showing different times. See picture. Also, when I go in Time Zone, I set Eastern time, it will set it, but when I go back to preference, it sets back to GMT.

It's running 10.5.6 if that helps.

View 7 Replies View Related

OS X :: Finder Search Cannot Specify Range Of Creation Dates

Nov 30, 2009

Using the Finder in 10.5.8, pressing Cmd-F to get to the Search window. I want to look for jpeg files created during December of 2008. I first specify file type = image, press the + to add another constraint, choose "creation date before" . . . today's date comes up by default, with little up/down arrows at the right to allow changes. Well, the arrows do nothing, and I can't edit the date string directly. The only change I'm able to make is when holding down the Alt key, which allows me to use the little up/down arrows to cycle through the months (but not days or years).

View 2 Replies View Related

OS X :: Newly Created Folders Showing Old Dates?

Jul 2, 2010

Whenever I transfer data from my MBP HDD to an External HDD, the folder it creates to copy that data to has a created date of, wait for it.....14th February 1946 at 8:34am. And how to change it so that the dates are correct (i.e. today!) When the folder finishing copying all the dates are fine. It's just that bit in-between whilst it's copying.

View 3 Replies View Related

OS X Mavericks :: Spotlight - How To Make Results Appear By Name Instead Of Dates

Aug 26, 2014

Results always appear by date... How can i make results appear by name instead of dates ?

Info:
MacBook Pro, OS X Mavericks (10.9.1)

View 4 Replies View Related

OS X Mavericks :: How To Get Rid Of Multiple Repetitions Of Dates In Calendar

Jun 22, 2014

For some reason probably the result of mistakes in synching, I have multiple entries of dates mostly birthdays showing in my iPad and MacMini. I can delete then one at a time,but with 156 repeats in one case, it becomes tedious. Where can I find the fields to delete the extra dates?

View 2 Replies View Related

Applications :: Ical And Iphone Syncing Dates Incorrectly?

Jan 12, 2009

I set a date in my iphone and it goes off correctly. however when i sync my iphone to my macbook all of the times are set two hours late in Ical.

I USED to live in las vegas which is two hours earlier than houston where i currently live however my macbook is currently set for central time so i have no clue how to trouble shoot this.

just for example, if i set a reminder at 1pm to wash clothes, it goes off correctly on my iphone, but it will set and go off in Ical at 3pm.

View 1 Replies View Related

Applications :: IPhoto Videos In IMovie Has Incorrect Dates?

Sep 28, 2009

My iPhoto Videos are appearing in iMovie '09 with the wrong dates and times, but the dates and times in iPhoto are correct. Rather than adjust the info manually, is there a way of correcting it?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved