IMac :: Leave Headphones Plugged In But Switching To Speakers?
Dec 26, 2010Is there a way for me to leave a headphone extender cable plugged into the back of my iMac and have the external speakers play until I plug in headphones?
View 3 RepliesIs there a way for me to leave a headphone extender cable plugged into the back of my iMac and have the external speakers play until I plug in headphones?
View 3 RepliesWith my iMac, I have Swan M10 external speakers that I love. I also like to use headphones sometimes.
My currrent solution for switching from speakers to headphones (or vice versa) involves physically turning the computer, disconnecting one input in the headphone jack, and putting in the other one.
It's been a bad evening. A friend accidentally tripped over a 1/8th to RCA cable we were running from the MB to the TV. Friend and TV are fine, but the MB no longer switches from "internal speakers" to "headphones" when I plug in a pair of headphones, the 1/8th cable, etc. It stays on speaker mode even when the plug is fully inserted.
I've experimented with a toothpick, and have engaged and disengaged the digital out, but that's not the issue. If I bend a fully inserted headphone plug hard towards the front of the MB (i.e., toward the USB ports), I get full stereo sound, which indicates the jack is still partly working; however, under all other circumstances, sound comes through the speakers, which suggests the MB isn't receiving the "switch" signal properly from the jack.
I've been googling for the last few hours, and it looks like Macbook Wind users have found ways to alter the AppleHda.kext file to allow them to manually toggle between internal speakers and headphones, which means there has to be a way to do this on the native Macbook. Unfortunately, no one seems to have this specific problem (or at least, I haven't found anyone with this issue since I started searching)
I've recently started using headphones more and more and something that really bothers me is that I can't change the output source to the Mac's speakers unless I unplug the headphones entirely. Is there a way to do this without unplugging the headphones? I've looked through Audio MIDI Setup Utility as well as the Sound system preferences but found nothing.
View 2 Replies View RelatedWhen I plug my headphones in, my mac does not recognize them. Why is this?
Info:
MacBook Pro, Mac OS X (10.5.8)
Might be a silly question:
I have an 8GB USB pen drive, formatted to Mac OS Extended (Journalled). I use it for backing up text documents (8GB goes a long way).
Is it ok to leave the drive permanently plugged into my iMac? I don't know what the life of these devices is supposed to be, so am I risking damage/failure by leaving it in?
My computer is pretty much awake 24/7.
I have a ~year old 24" iMac (2.8 GHz Core 2 Duo) that I just suddenly started having a problem with. I use headphones pretty regularly and they are almost always plugged into the headphone jack. Recently, I lent my headphones to someone and, when I plugged them back in, the machine doesn't detect them. The audio works just fine coming out of the internal speakers, it's just that it *always* comes out of the internal speakers, no matter if the headphones are plugged in or not.
I took a look at the Sound Preferences panel and, sure enough, it doesn't detect the headphones as plugged in (just the internal speakers). Does anyone have any suggestions on troubleshooting? I'm not sure it matters, but I did just recently upgraded to 10.5.6. The headphones worked after the upgrade, but it may be that this is the first time they were *re*plugged in after the upgrade.
It's been a bad evening. A friend accidentally tripped over a 1/8th to RCA cable we were running from the MB to the TV. Friend and TV are fine, but the MB no longer switches from "internal speakers" to "headphones" when I plug in a pair of headphones, the 1/8th cable, etc. It stays on speaker mode even when the plug is fully inserted.
I've experimented with a toothpick, and have engaged and disengaged the digital out, but that's not the issue. If I bend a fully inserted headphone plug hard towards the front of the MB (i.e., toward the USB ports), I get full stereo sound, which indicates the jack is still partly working; however, under all other circumstances, sound comes through the speakers, which suggests the MB isn't receiving the "switch" signal properly from the jack.
I've been googling for the last few hours, and it looks like Macbook Wind users have found ways to alter the AppleHda.kext file to allow them to manually toggle between internal speakers and headphones, which means there has to be a way to do this on the native Macbook. Unfortunately, no one seems to have this specific problem (or at least, I haven't found anyone with this issue since I started searching). Any help would be greatly appreciated.
I'm still in love with my iMac, now entering the phase where I have to fight with SWMBO* to get access to my main machine. I have plugged a pair of headphones in the iMac but I would like to be able to find a software solution that would let me switch between headphones and the internal speakers of the iMac (which are quite good actually!) Plugging / Unplugging is not really ideal and I swear I thought I could do this on my powerbook...
View 11 Replies View RelatedI own an Imac g3 snow. I was wondering if i could take the back case off and switch it out with a tangerine one? will it fit? how about the speakers also?
I think it would look sweet with the white and orange. switch it to a imac g3 creamsicle
Of course i'll unplug it 2-3 times a month and run the battery down to condition it, but other than that, is it bad to leave it plugged in 24/7, including when not using it and it's turned off?
View 14 Replies View RelatedIs it better to leave the Macbook plugged in all the time or plug it in only when the battery is low to charge it up again?
View 12 Replies View RelatedI know it's okay to leave it plugged in 24/7 as long as I complete at least one battery cycle a month, but should I unplug it when i turn it off, or does it matter?
View 7 Replies View RelatedI have a late 2009 macbook pro unibody 15" and I hardly use the optical drive, in fact that startup whine is really annoying, would it be harmful if I just removed the drive completly and not leave anything plugged in?
View 3 Replies View RelatedI just plugged headphones into the headphone port on my iMac(dual core 2.4) I went to system preferences, sound, then output and only the internal speakers show up. I rebooted the machine and still, same thing.
I tried the same headphones on the eMac sitting next to it, and it worked just fine. Still confused about the iMac
This probably seems a bit ridiculous, but after having my first power supply melt and short out on me I've been completely paranoid of this happening again. My first power supply was one of the older models from 2006. I then got it replaced by one of the newer smaller models. After about a half a year it started twisting around on the inside of the cable which got me worried. The apple store wouldn't replace it unless it was melted so I called Apple and got a new one.
I've had the newer one for about a year and the cable seems to be wrapping around itself on the inside again. There doesn't appear to be a place where it's melting or breaking. I take care to not wrap it too tightly. Using it as a desktop replacement I'd like to not have to worry about leaving it plugged in when I'm gone. I find it crazy that this is even an issue but after having the first one melt right in front of me I find it hard to trust. Are the newer power supplies any better?
I just got my mac about a week ago. I'm currently arguing with my grandmother over whether it's better to leave the MBP plugged into the adapter all the time or let it drain the battery.
View 10 Replies View RelatedSo I just got hold of a few of these new battery chargers from Apple and I'm just wondering if these are meant to stay plugged in the wall, even after the green light goes off. Does the light going off mean that the batteries will no longer draw power from the power outlet and that it is safe to assume power will continue to be consumed? Or is it preferred that I plug and unplug the charger only when needed to avoid any, unnecessary, extra power consumption?
View 3 Replies View RelatedCan't hear anything from my headphones when inserted into my macbook air?
View 6 Replies View RelatedEverytime I plug or unplug the headphones(iPhone 3GS ones) from my uMBP the systems hangs, sometimes even with beachball.
View 1 Replies View RelatedI'm currently using the 13 inch Macbook Pro with the latest software. I noticed just today that the built-in microphone that comes with the laptop will not work when I plug in my headphones. However, as soon as I remove them, they resume working.
View 1 Replies View RelatedI've had my mac for a couple months short of a year. A few weeks ago, I needed to record a quick idea for a melody my guitarist and I had. I was aware that the I/O jack were one and the same in the 2011 MBP model, so I changed my settings to allow me to use it as an input jack. No problem.The problem, though, is that I can't use it as an output jack anymore. Audio plays fine through the built in speakers but turns into static when I change the I/O setting to output and plug my headphones in.
Info:
MacBook Pro, Mac OS X (10.7.3)
My Macbook pro will not play sound unless I have headphones plugged in. When the headphones are plugged in, the sound comes out of the Macbook speakers only. How can I get it back to normal?
Info:MacBookPro, Mac OS X (10.7.3)
The volume for my MacBook will only work if my headphones are plugged in. I've tried just about everything I could think of to fix the problem but it's still not working. I've tried blowing it out, wiggling the headphone jack, checking the sound settings from the system preferences. I've come to the conclusion that there is a problem with the sensor, but I wanted to find out if there is anything else I could try before taking it somewhere to get repaired.
View 1 Replies View RelatedWhen I first bought my MBP (January 2012) I had this problem; plug in headphones, and I lose the ability to control the volume using the keyboard controls.Over the phone, Apple had me do a PRAM reset. After that it only happened sometimes, with a regular reboot solving the problem. It happened again today. I did a PRAM reset again because I'm sick to death of the little ******** issues I have with this MBP. (I've brought it into an Apple store, they kept it for a week and said nothing was wrong with it.)
The PRAM reset got it working ... then I plugged in the headphones. They still worked while they were plugged in, but when I unplugged them. Gone.BUT, not only are they gone for the MBP's speakers, they're gone for the headphone as well this time. AND, not only are the keyboard volume controls not working now, but the little volume slider at the top of my desktop isn't working either. I did a regular roboot, it solved it, until I plugged in my headphones. But it gets better, the keyboard buttons work if I'm using my headphones and listening to something on YouTube, but they don't work if I'm listening to iTunes. And that's only the headphones, MBP speakers non-responsive in either case.
I do get the little pop-up interface that shows you the volume going up and down or if it's muted, it even gives me that little chime everytime I click the buttons, it's just not doing anything except looking pretty. I can control the volume either by using the volume slider in iTunes (or whatever application), as well as by going to System Prefrences, clicking on Sounds, and controlling it using the Output Volume slider.
Info:
MacBook Pro, Mac OS X (10.6.8), 2.8 i7, 8GB RAM
I'm having some trouble having my speakers and headphones working together.
In my prior setup, I've always had my Macbook Pro Line-Out connected to a set of speakers who allowed for my headphones to be jacked into it.
I had no problems with this setup as it allowed me to use either one.
Now, I bought a new Logitech G35 headset which has a USB end as opposed to the 1/8" jack, and I have to switch between the speakers and headset via Settings > Sound > Output.
is there a third party app that puts a sound icon in the menu bar for quick switching between headphones and lineout and internal speakers?
View 4 Replies View RelatedI was wondering if it's possible to play sound through the speakers and headphones of a computer simultaneously.
The reason I was wondering if it would work, is because I'm recording a song for school, and I can't hear the backing track through my speakers, but my computer still picks it up. However if i we're to use headphones and my speakers could be playing the same thing at the same time, everything would be fine.
Its been a while since i've looked into this after i first realized that the speakers attached to my G5 PM didnt shut off when i plugged in headphones. Has there ever been any type of software fix for this? And while we're at it, was this issue resolved in Mac Pros?
View 6 Replies View RelatedWhenever I try to play Black Ops(in my windows partition) the sound comes out of the speakers even when my headphones are in. How do I fix this?
View 3 Replies View Related