I've been using it since day one with Tiger and Leopard (31 Gb for windows), now I just wanna uninstall (erase) the windows part as I don't need it anymore and I could use the extra storage. I would also like to know how to wipe all the data and do a Clean install for MAC OSX as well , might need that for a better performance after all .
View 1 Replies
Simple question:
Here is my setup:
Hard drive 1: Mac OS
Hard drive 2: Windows (installed via Bootcamp)
If I do an Erase and Install of Mac OS on drive 1, will my Windows drive still show up if I go to System Preferences > Startup Disk?
I'm turning my old white imac into a bedroom plex viewer (it will eventually become a kitchen computer) and I want to do a clean install. This was my primary workstation for years before I got my Mac Pro and its just loaded with crap, all of which I've backed up to sort through later
It currently has Tiger and I want to upgrade to Leopard (I bought a family pack for it and my powerbook). I have a bootcamp XP partition which I would like to keep and not destroy. Can I do a clean install except for the windows partition? Or will doing a clean install destroy bootcamp.
I would like to clean install Lion into my Macintosh HD drive and leave the bootcamp drive without getting affected from it...is it possible or do i have to do the install on all the drive?
Info:
iMac, Windows7
According to authorized Apple agent my system is corrupted in certain areas, namely
1. Bootcamp, needes to uninstalleed and reinstalled, how to
2. Same for paralles, also, how to
Aside , if parallel is working, do i need bootcamp. Of course after these are done, I will need to reinstall Windiows 7, of which I have install disk ...
Info:
MacBook Pro, OS X Mavericks (10.9.2)
This is the first time i reinstalled(clean install) my snow leopard on my MBP. All went fine but then i inserted the disc for bundled application (which contains the ilife apps) but it keeps failing.
It says that "the installation failed. the installer encountered an error that caused the installation to fail. contact the software manufacturer for assistance".
I've also done my research on this matter. I've gone thru a few steps i tried as below without success:
1)normal install - fail
2)repair permission - fail
3)install in safe mode - fail
4) install using another admin acc - fail
5) made an image out of the disc and install - fail
6) used a similar disc(my dad's since we have identical version) - fai
7)updated my system and install - fail
8) reinstall the mac - fail
i cant think of any other solution as im a bit noob when it comes to mac. is there any other things i could try before taking it Apple?
Info:
MacBook Pro, Mac OS X (10.6.8)
The internal hard drive on my early 2009 iMac is being replaced but I have to reinstall Snow Leopard myself.I did search in MRoogle and at Apple and cannot seem to find instructions on how to perform a clean Snow Leopard install on an iMac internal HD.
Can I do this? And if so how? Or do you think I should try and install Leopard on the existing Hd in the iMac? I still have these discs but have to get the SL applications install disc out of my drive (it's stuck and the iMac won't boot past the blue screen).
i just bought a macbook pro and i want to do a clean install but it didn't come with the install disks. is there a way to do it without buying new disks?
View 24 Replies View RelatedI purchased the new Mac Box Set with Leopard 10.5.6, iLife '09 and iWork '09.
I was 50/50 on which type of Leopard install I wanted to perform today.
Looks like the disc made the choice for me and performed, what I'm assuming, is the upgrade. All of my files, settings, etc. were intact after the reboot.
I have the Win 7 RTM currently installed on my Mac Pro, on a dedicated internal hard drive. I'm running VMware 2.0. I have the retail version of Win 7 arriving today. Anyone know if I can just install through Windows, i.e., while running my existing Win 7 installation via VMware, or do I have to go through the whole clean install via Bootcamp routine?
View 7 Replies View RelatedI have many questions but few clear answers. What would be the benefits of doing a clean install vs. an upgrade? I have an iMac 8,1 which supposedly is eligible for a 64 bit kernel. Would I have to do a clean install or an "archive and install" to get the 64bit kernel? Also, can someone explain to me exactly what an "archive and install" is/does? From the name, I'd assume it would back up your HDD to an external storage unit, then do a clean install, but I'm probably way wrong.
One more question. If I so happen to choose to do a clean install, would Time Machine be an adequate way to restore all my data after the update? Any help or answers to any of the above questions would truly make my day. You will also be rewarded $1,000,000,000 in Happy FunTime money.
I have recently done a Time machine back up of my MB Pro 15" then wiped my hard drive trying to clean it up so I could install Windows 7 with Boot Camp. I had my original Install Disk which I forgot was Tiger, Having used one of my brothers company licenses to upgrade to Leopard but that disk is now with him in another country. So now I can not restore from my Time Machine backup. I have a Leopard Install disk for a Macbook Pro 13" which I also own. Is it possible to use this disk to re-install Leopard on my 15"?
View 3 Replies View RelatedHow do I uninstall mac os x leopard and re-install
Info:MacBookPro, Mac OS X (10.6.8)
I'm a newbie, forgive my question but I just did an Install and Archive yesterday, but I don't know if I really should be doing a CLEAN INSTALL...
FACTS - I have an MB403LL/A (2.4GHz C2D, 2008 Early Peryn) which I use to make music with ProTools 8 LE and Reason 4.0.
- Upgraded RAM from Corsair to OWC RAM (4GB)
- Before the Install & Archive yesterday I was experiencing problems with Safari freezing up and not being able to relaunch. I believe this was due to the RAM, hence, I bought new and better RAM.
- I could not boot up my MacBook one morning, so I trouble-shot it and the only thing I could do was Re-Install the OS X.
- I did the Install & Archive with the OEM Samsung RAM and put in the OWC RAM AFTER that.
QUESTIONS - I would like to really have a fresh install of everything but not sure if there is much difference between the Clean Install and the Archive and Install? (I would just move the files I need to my external HD)
- With the Clean Install - will I be bringing my MacBook back to where it was fresh from the factory?
Should I buy the AppleCare for it? I was thinking of upgrading but there is not much difference in performance to what I have... 2.4 C2D at 4GB RAM...
how to uninstall my current OS Tiger and install OS Leopard? I am using an iBook G4 1.42 GHz PowerPC with 1.5 GB RAM. 60GB HDD. Are my specs ok to run Leopard?
View 6 Replies View RelatedI've been trying to install and use BootCamp from Apple, so I can use Visual Basic for my classes. Obviously, I need Windows for this. Anyway, i downloaded BootCamp, installed it, and then Windows XP. After this I was told to insert my OSX disc to get the drivers. Well nothing happened at all. I suppose because this install of Leopard didn't include BC, it was a seperate download.I then read that BC Assistant should give me the option to burn a drivers disc. I looked at the provided screenshots, and right where the button should have been, there was nothing.
View 6 Replies View RelatedI searched for a while trying to find the answer but did not find it. I just installed Vista Business via Bootcamp. I am not able to access the internet or anything. If I read the help stuff right I need to use the OSX install disk to install the drivers. The problem is, I don't have the install disk. Is there any other way to get the drivers? Or am I just missing something easier?
View 5 Replies View RelatedSo I bought my Macbook August of 2007, and have only Archive & Installed when Leopard came out.
I don't have any noticeable problems yet I know a lot of people wipe their computer clean, back-up any important programs and files, and then re-install their OS. Do a lot of people do this?
I kind of want to but it's my first time doing it so I don't want to mess anything up or forget something I need, etc.
I am getting my UTD disc next week sometime, and I would like to know how to do a clean install with it.
Before I would put the disc in, then go into the install process through finder, the computer would reboot, and then I could access disc utility from the top bar and just erase my disc.
Then I would continue and install the new OS on my blank hard drive. With the UTD disc, I hear people saying that you have to delete a file on the disc? Which file is this?
I have the most recent versions of iLife, iWorks, and Office for mac.The new versions are expected to come at at some point. I am plan to get the most recent versions of these programs when they become available.My question is, do I need to uninstall the previous versions before I install the lastest ones or can I just install the lastest ones immediately without uninstalling the old versions.If I do need to uninstall old versions what happens when I don't do that? I would like to know what happens to the old version after I install the newest version.
View 5 Replies View RelatedSo about a week ago I attempted to Dual Boot Ubuntu on my Boot camp partition. Due to a compatibility issue, even though I installed it easily, it was very slow, so I proceeded to erase all data on all the partitions the installation created, ending up with The OS X partition + 4 other ones. (there was an EFI part. too).
Now here's the problem. Right after I uninstalled Ubuntu, when I booted up my MBP, it took a VERY long time to The Logo to appear, almost seems like it was searching for something, ... . The same thing happens after I uninstall rEFIt, and after merging some of the partitions, ending up, right now, with 3 partitions. What a mess!
Boot time, unless I press the option key and select Macintosh HD, is about one minute 15 sec. because of the insanely long time to the logo to appear.
What the heck do I do? I would prefer not re-formatting my disk, I've gone through so much downloading and installed a whole bunch of things I need... And I don't have an external Drive.
just got my MBA today and followed the clean install sticky here. However, I did not get the options to remove some of the software listed in the instructions.
I just checked the space and it looks like that the install took around 9GB of space? Is that correct? Bear with me where as this is my first Mac...
Basically, the guys at the Apple store said the hard drive on my 2008 entry-level Mac book had died so I went out and bought a new one from Western Digital.
But when reinstalling, the screen froze on 'verifying destination volume', then packs up and suggests I start again.
Searching this forum I see that others have had this problem and that one solution is to perform a 'clean install'. My question is, how do I go about doing that?
I hope to get a copy of Snow Leopard this weekend. Are there any advantages to doing a clean install instead of just upgrade the system?
View 4 Replies View RelatedWill I get most of SL if I upgrade? or if I clean install? Also is it possible to restore applications to SL from Leopard time machine?
View 6 Replies View RelatedI am trying to figure out how to make a clean install of SL. I just upgraded from Leopard yesterday. I got the family pack, and everything is working flawlessly
Though I want to know something; how would I make a clean install of SL? I have a bunch of apps I never use, and other junk files that live in my computer. It would take almost a week to get rid of them all manually, so I was wondering if there was a way to make a clean install? I want to clean my HD as if it were completely brand new.
I am installing Snow Leopard on My Tiger computer. Backed up the files
1. I was wondering since I am on Tiger will I need to do a clean install or just an upgrade? (Dumb question but I need answers) I have the upgrade disk and I heard the upgrade disk is the exact same as the box set and I do not need iwork 09 cause.
I already have it and I don't need ilife 09 because I have final Cut pro, photoshop, and I have some HTML knowledge.
Also, i have no interest in music making so I don't need ilife.
2. If I do need to do a clean install how do I do that?
3. Could I just do a upgrade?
I want to wipe everything of the HD and install from scratch. How would i do that?
View 5 Replies View RelatedIf I do a clean install and restore from TM, will I have to enter all my apps' serial numbers?
This is the only thing holding me back from doing a clean install on my 3 year old iMac. Does it even matter? I didn't do a clean install from Tiger to Leopard and it worked perfectly.
I just thought that starting from scratch would make the computer zoom like it used to.
Purely out of curiosity. I'm still using 10.5.8 and am completely happy.
View 12 Replies View Related
