display on my iMac 27 (bought in august 2011) have many dark spots. This is my display: url.. Could i replace my mac if i don't bought apple care? I live within USA and don't have Apple Store
Info:
iMac
My iMac has these dark spots on the screen and I wanted to confirm that it is a hardware issue before I make an appointment with an Apple genius. I thought it was dirt, but cleaning it didn't do anything.
View 24 Replies View RelatedI bought an Imac 27'' like 6 months ago, but my screen seems to have some dark spots in the corner, when I put any white image, on that spots it shows like the screen were dusty but is not, at the same time in the middle screen when if Iput some black image some pixels show lighter than the others.
Info:
iMac, Mac OS X (10.7.1)
I replaced my iMac G4/800 17" hard drive that was failing (S.M.A.R.T. status) tonight. Textbook operation, following directions from xlr8yourmac.com. No problems at all. I pre-built the drive with Tiger 4.10 in an external case (using the iMac as host) and transferred everything to the drive and tested. I booted off the external drive for a few days for testing. Again, no problems.
I got the iMac back together and booted up. Everything sounds fine but the monitor is black. It's as if there's no power to it or perhaps the lamps were just out.
When I press the power key for 1-2 seconds, the mac goes to sleep and the white Sleep Light on the front of the monitor comes on, so the monitor would appear to be getting power.
The Mac is working, evidently, as the chime for new mail sounded and the new drive chirps a little (very quiet though, btw).
I do NOT have a second monitor to hook to the VGA port, unfortunately.
On one reboot there was a sine-wave 'bong' sound, but the Mac proceeded to boot. I shut down again after that, took the housing apart and checked for trouble. Nothing. The video cable and connector is fine. There are no cables pinched or cut that I can see. And I did ever-so-carefully align the two halves when reassembling.
On the third boot I got the normal Mac chime (no bong/gong) and it booted fine - with no video.
One side note that I expect to be un-related: I left the HD jumper in cable-select mode, as the drive that was in there was also set on cable select (was a Western Digital 250GB drive; the new drive is a Maxtor).
What's wrong with this iMac monitor?
How many others on here have an imac with burn in problems? I have a tone! I am so unhappy with this product. I am happy I have the extended warranty, I am now getting a new monitor for my imac.
View 5 Replies View RelatedAllright, I have a 24" iMac. 3.06 Core Duo 2 4GB RAM etc etc.
Just now, as I was innocently talking to a friend using iChat, the top of my screen flickered once or twice and then went dark. I am typing on it now, so it is not unreadable, it just looks like the back lighting has gone off on the top half. The middle is relatively light (bleedover from bottom back light?). I have tried playing with the hinge to no avail. After I reset the computer, cleared pram-nothing. Zippo. I got the top to stay lit for about a half second after reset, but it then flicked off again. Do I need to load up my iMac and drag my ass to the Apple Store (it really is quite a task to drive there)?Here is a horrible cell phone picture (and no, the screen IS dark, that's not a shadow.):
I can barely see digital pictures and the likes. But websites and such i can see fine so long as the colors are light and looking on this site... [URL]
the first image i absolutely cannot see, it is 100% pitch black.. the other bellow it shows up just fine. But the two left/lowest squares on the color table on the very bottom the page both appear the same shade of pitch black.
I can see light but not dark. I tried callibrating and adjusting brightness and contrast.
I would like to know if there is a way to display all of the hot spots or Links on a Safari web page in OSX. In other words is there a possible key combination that will highlight all of the active spots on a page at one time.
Info:
iMac i5/27/2.66GHz, Mac OS X (10.7.2), 8 Gb Ram, Internal 100Tb, External 250 Gb.
Over the last few months I've started to notice my Macbook Pro (13" Mid 2010) developing display issues.. every now and then the screen will freeze and black spots/dashes/lines will appear on the screen.
My mac is fully up to date and I can't seem to work out why this keeps happening?
I've included some screen shots so you can all see what I'm talking about. Thoughts?
http://d.pr/r8VF
http://d.pr/TQJ5
http://d.pr/45dD
Info:
Macbook Pro 13" (2010), Mac OS X (10.6.6)
My six years old MBP OS 10.4.x Tiger all of the sudden the display turned black. I hardly see the content of the desktop only when there is some light on the room, looks like I have reduce the light to the Display. I have tried to reset the PRAM with the opion, ctrl, P, R key combination and it did not work. It boots-up OK, no problem with the HD neither Memory, I have not run any test on it though. I have not had any trouble on my MBP until now and I have to say I have never reinstalled the OS.
Info:
MacBook Pro, Mac OS X (10.4.11)
I have an iBook (OSX 10.3.9)that's been great for the last couple of years. However the last week or so the screen goes dark for no apparent reason. You can still see through enough to fiddle around and hit shut down...and after it shuts down, and I restart it...it seems normal...that is until the next time. It's happened about 4 times in the last three days. A couple of times on battery and once plugged in I think. It's like it goes to sleep but you can't hit the space bar to wake up. Also seems like maybe an energy saving deal gone awry.
Now for info that may be pertinent: I dropped this laptop(in it's case) about a year ago. Holy crap..all docs would only read in magenta. No black no color only magenta and a "photograph negative" looking image for background or any graphic. I was sure it was dead duck and fried but kept trying it periodically. After about a month, after giving up...I turned it on and it was fine...as if nothing was wrong. Weirdest deal. It's been fine ever since.
I thought perhaps I was too lucky...and assume this may be a result of that fall.
I have a dark spot on my MacBook display of diameter 0.15 inches (or 4 mm). The spot is bright if looked from an angle.I brought my Mac to the Apple Care and I just received the verdict: the spot was caused by ME by applying extra pressure to the LCD!. Which is not covered by Apple Care warranty!
That's interesting since I am 100% sure that I didn't harm the screen. The guy even suggested that I forgot my pen on the keyboard and closed the laptop! That's great!
I told the Apple guy to send me back the laptop as it is after he offered a repair for $700 plus tax! But I am determined to go on with this since I love my Mac, I spent a lot of money on it.
My macbook has had this problem for a while but I have lived with it so far, but now it is really annoying me. Images and video are displayed very darkly, often loosing a lot of detail and maing the image un-seeable. I have tried fiddling with the gamma settings and all other settings that I can find on the control pannel, but so far I have had no luck.
Just as an example, this is a frame from some video I shot:
click for pic
On any other monitor, the bulb appears bright and white and the ball bearing is visible. On my monitor the bulb is very dark, most of the fragments are invisible and the ball bearing is just a small crescent of light.
Why would our display will suddenly go dark when browsing?
Info:
iMac (21.5-inch Late 2009), Mac OS X (10.7.3)
So I've got my MBP that I've had for about 4 months, the thing is. It just recently started to have screen flickering issues. I'll be sitting doing w/e as usual and all of a sudden the display goes dark, almost black, for a second, then comes back up again. I have yet to find any trend in when this is happening, but it is definitely happening on battery as well as plugged in, but it seems to be getting worse.any one have any idea what this could be, something I can fix on my own, or should I take it in?
View 7 Replies View RelatedJust picked up a 11.6" MBA this past Saturday. I am noticing an interesting display "issue"... I wanted to confirm that other's are not seeing this before I take it back to the store.
On the bottom of the display, there's a strip, maybe 2-3mm worth, where it is darker than the rest of the display. Are any of you seeing this behavior as well? It's particularly noticeable when when using solid background colors.
Recently, the display of my MacBook Pro (unfortunately, out of warranty) often is black/greyish after wake-up/start-up with a thin white stripe in the middle of the screen, and the computer (obviously) cannot be used in this mode (you can hear it start up, but since the screen is completely dark, I can't actually do anything - restarting doesn't help either).
At first I thought it might be the graphic card (since there is a known problem with NVIDIA), but I've brought it in for repair where they have run multiple software-tests, and no error code was returned (when I brought it in it magically "fixed itself" and, once running, the problem can't be re-recreated), so nothing was fixed.
It seems to me that the MacBook for some reason cannot find or communicate with the display because I just discovered that if I hook up an external monitor, it manages to find that, and, after disconnecting the external monitor again, also "reconnects" to its own display. It then generally runs fine until I physically move it (ie. put it in my backpack and carry it somewhere) - after being moved, it tends to have the same problem again (not always, but more and more often).
Have you had any similar experience and/or what might cause this and how it could be fixed? I'd like to avoid replacing the display or something of the sort until I know for sure what's going on.
i went to clean some smudges on my screen today and noticed that there are some spots on the other side of the screen's glass... this there for anyone else? It's pretty freaking annoying. This machine should be perfect.
View 1 Replies View RelatedI have a 28" inch display attached to newest version of Air. Works ok except when I have a full screen on plain dark grey background, then I see a waviness or flickering effect. Like the dark grey in Iphoto background. Other than this, the other colors seems ok. Pictures are fine, even when dark. Maybe there's a slight flickering with dark blue. Any explanations for this.
using mini display port to dvi. Tried with a friends dual link display, was a little different, but still unstable looking in dark grey when it fills the screen.
Could it be just what it takes to make this color, or the Hertz, which is 60. Other than this, no problem with the screen.
The thing is, that the machine is turned off on the images.
Before shooting the attached images I had just cleaned the screen using a damp cloth and afterwards wiped it with a dry microfiber cloth. Just to make sure it wasn't dust or fingermarks.
I also tried to see if it was just shadows from lamps in the room, but it wasnt.
The areas shown on the images only appears when turned off. Now when sitting in front af the machine they are not visible.
what it is, how to remove them, or know if this is a consideren an error worthy of a return.
I get an dark black stripe at my iMac (mid 2007 or 2008).It's best visable when i put my darkness at lowest setting and on white survaces.
View 2 Replies View RelatedI tried to use some software to test the display. I found when the screen goes to completely dark with the backlight on, the bottom side of my screen is brighter than other parts.... have u guys met any problem like that, or is this some problem with my MBA?
dread going to work and use pc all day. anyway the only issue i have is every so often i will be working away and my whole screen goes blank for a second,,freezes. I have to tap the mouse to get it to come back,
View 5 Replies View RelatedI have a late 2007 20" Alu iMac and when ever I watch videos they appear too dark. I have tried changing all the settings I can find and nothing helps.
Its ok if I use VLC as I can change the brightness within the program but anything else ie quicktime, youtube or other embeded video always looks way too dark.
Has anyone else encountered this or is there something out there that I can do do brighten the video image?
So after giving up the new iMacs after two replacements about six months ago for yellow screens......I thought I would try again.
The good news is that the white is very uniform with no yellowing. The bad news is that it has this dark band across the bottom of the screen just above the dock.
So I am basically in the same spot I was six months ago. Replace the unit for a new one, replace the screen, or just live with it. Maybe I am being too anal but for $2,500, I shouldn't have to live with anything but a perfect screen.
My screen has gone to a very dark grey on startup. I can faintly make out the desktop icons, but it is about 98% black. Everything else seems to be fuctioning. iMac G417" Flat Panel 17" [Pixar-lamp style] OS 10.4
View 4 Replies View RelatedSince to switching to an iMac from a PC, I have noticed that all of my images while looking great on my monitor print out way too dark. I had to actually record an action in Photoshop to adjust the images prior to printing. I could not understand why and just figured well it is what it is and not much I can do about it. However, on reading the June issue of Shutterbug magazine, there was an article in there in which they specifically mentioned the iMac,and the problem that was being experienced by everyone, professionals and amateurs alike with the "dark" prints, and put it down to the fact the iMac monitor was too bright ergo the issue with the dark prints.
Has anyone found a way around this rather than having to adjust the image way out of range in order to get it to print correctly and then revert to a prior state? Please.
PS - I am using an EPSON R220 and an EPSON 1400, both of which printed fine with my PC. (OK Mac lovers, don't jump down my throat. I love my Mac. it just has a few quirks - like all computers - that need to be unravelled.)
When I start typing on my imac after a few letters it freezes and background goes dark grey.Need to click on last letter with cursor to get it out of grey.
Info:iMac, iOS 4
I have a question (whoa). I have an iMac Dual Core, bought in mid-2007 (it's the White Plastic version, not the newer Aluminium with the glass-display).
For some time now I had some dark spots, kind of shadow like in the bottom left corner. I wasn't bothered too much by them, but they got bigger, and now I have these in all of the corners except the bottom right one.
Anyone got any ideas how to get rid of them? (no, no three-year guarantee plan ... stupid me), or if not if it'd mean to replace the whole display or if it's just some cleaning (I talk money-wise here ...)
I attach two not-so-good pictures (the background is plain-white and the image is a bit enhanced ...) so you guys can see what I mean.
Just noticed the left side of my screen has a dark curve. What to do.
View 6 Replies View Related