if i wanted to get a blu-ray reader/ burner for my mac pro i will need drivers for it. Makes sense. Here is the issue all the blu-ray drives i see that are supposedly for mac do not seem to come with drivers.
I have also seen people say all you need is a software such as toast titanium for Blu-Ray.
I want to put blu-ray movies on my mac and convert them to HD so i can stream them. so i need a blu-rayu drive.
I own a mac mini and i purchased an external dvd burner. When i first hooked it up it worked, after disconnecting then moving it, i tried hooking it back up and now it doesnt work. i searched for drivers but nothing. is there something im missing?
View 2 Replies View RelatedAfter a DVD burner for the second bay of my Dual 1.25 that will work out of the box...
I was hoping you could recommend me a Blu-Ray burner for my new Mac Pro.
From what I've found, these are the top 2 choices:
http://www.mcetech.com/blu-ray/
and
(URL)
The second one is external - I prefer internal that I can drop into the Mac Pro. But it does have LightScribe - nice! Maybe there's something out there that is internal AND has LightScribe? Who here has installed a blu-ray burner into their Mac Pro?
Anyone have a BD Burner that they use on their Mac Books or Mac Book Pro? I am interested in getting one to backup my images, I am a photographer and shoot in the RAW format. I also just purchased a new camera, where the uncompressed images are anywhere from 20-30MB a photo. So projects tend to be quite large.
View 9 Replies View RelatedI recently purchased this BR burner: (URL)
I mounted it in this external enclosure: (URL)
This is all running on a 27" iMac Core i7 via firewire, and daisy chained off my GuardianMax RAID drive.
This combo works great for ripping and playing, however, i do have one problem. When the player is on and i need to either reboot or shut down the system just hangs. It won't proceed until i power down the bluray burner.
i recently updated to mac 10.3.9 and my cd burner won't work anymore. under system software is says disc burning is not supported with my iomega CDRW86522EXT3-B: how can this be? earlier in the year it worked fine, and I did burn discs. What happens now is that sometimes it says that my disc isn't supported, and if I do get throught the burning nothing plays on my regular compact disc players. (I'm burning audio files)
View 3 Replies View RelatedI'm hoping this can be answered with a simple "yup" so here it goes.
I have an 8-core 2008 Mac Pro tower. I need to throw a blu-ray burner in it.
The tower only has IDE interface cables for the two optical drive bays.
Will these play nicely together?
I have Mac OS X 10.4.11. with an internal Pioneer DVR-106D CD/DVD burner. I "capture" opera performances on-line, edit them with CD Spin Doctor 2, send it to Toast where it is then burned to disc. I have been doing this for years with no problems. This past week I started receiving the following message "sense key=medium error. Sense code= OX73, OX03". I tried several different CDs and had three different brands which always did work but stopped working...Philips CD-R, TDK, Memorex Black CD-R. I had two Maxell CD-Rs and they worked. I purchased a cleaning disc hoping that cleaning the lens would correct the problem. Still none of the previously mentioned CD-Rs would work and I was unable to purchase additional Maxell discs locally. At Sam's Club I purchased Verbatim CD-R, placed one in the computer.....and it worked. For almost a week I've been able to burn CDs once more, until tonight. Again, I used the cleaner disc plus retried some of the other brands of CD with the same results...no burn. When I tried burning a disc with iTunes, I received the following message "The attempt to burn a disc failed. The device failed to calibate the laser power level for this media."
View 7 Replies View RelatedI can no longer burn DVD's on my PowerPC G5 with 10.5.8, but can no longer do it as well on my Macbook Pro with OS 10.6--are all internal Superdrives now non functioning!!?? I've wasted many DVD's and no successes, just error messages and failures to burn.
Info:
PowerMac, Mac OS X (10.5.8), PowerPC Processor
I've installed win 7 twice now, and I'm finding that when I first get it going everything works as I would expect it to. However when I load back into it my direct x 9 drivers don't seem to work. I'm not sure how to fix this. By the way have tried downloading drivers again but it doesn't work.
View 4 Replies View RelatedMy mp 830 works just fine - but the scanner doesn't work - the machine looks fine - probably a software or driver problem?
Info:
MacBook Pro, Mac OS X (10.7.3)
I have a Mac Pro early 2009. I'd like to build a setup that allows me to use the 64-bit kernel.
The question.... do printers need 64-bit drivers to work under 64-bit kernel?
Apple recently replaced my macpro with a newer one and they royally messed up my windows partition so I had to start over. I reinstalled WinXPpro and installed the drivers from the Leopard disc. I have about 20 unknown devices in my hardware panel. Most importantly my wireless and two ethernet jacks aren't working in XP. I tried manually installing drivers for my wireless card, but couldn't find the exact driver (I have the Broadcom BCM43xx 1.0 (5.10.38.35)). I also tried running the latest bootcamp 2.1 install as well and that didn't work. If anyone knows where I can get the exact drivers for my wireless card I think I can just connect to windows update and it can handle the rest. I should also mention I've hardwired my computer to the network as well and windows doesn't recognize that either.
View 1 Replies View RelatedI had a new hard drive installed on my iMac with OSX 10.9.4. It then would not print to either the HP psc 2510xi Photosmart (USB cable) or the networked HP Officejet 7000, both of which had worked with 10.9.2. I downloaded new drivers from HP and Apple: HP Printer Drivers v.2.26.1 for OSX. When I try to Add a printer I get the message: Can't install software because it is not currently available from the Software Update server. HP support labeled my Photosmart obsolete and sold me an Officejet Pro 8100. Same problem even though it came with a CD with printer drivers. Same messages.
View 4 Replies View RelatedI am looking for printer drivers to go with the Leopard Macmini that I ordered. I own an hp psc 310 series. I found OSX 10.4 drivers. Will these work?
View 2 Replies View RelatedI know the Boot Camp drivers that are shipping with the latest Mac Pro includes 64-bit drivers for Vista, but I was wondering if anyone has tried to see if they work on XP x64? That's the 64-bit Windows version I have on hand and it would be nice to get it to work. I don't suppose the drivers that shipped with the MacBook Air are any newer?
You would think that Apple would jump to support XP x64 given the commercials about people switching back from Vista to XP.
All the drivers don't work, this is when I try to install via the BootCamp Windows Installer.
However if I manually install all the drivers it doesn't work?
PS. I am a complete newbie at MAC.
I installed it fine everything is perfect. I cant get my audio to work need the drivers and I cant find them online. can someone point me in the right direction?
View 4 Replies View RelatedSwitched my Mac Mini (first rev PPC 2005 model) yesterday morning to find that the internal drive had vanished, seemingly. It was not mounted on the desktop(I boot from an external Lacie firewire drive as a rule. Went into Disk Utility and attempted to initialise the drive. Failed with and 'Input/Output' error.
Rebooted into open firmware as there was a DVD in the drive which I could not eject, was unable to eject the DVD using the Open Firmware command for doing so.
Began to assume the drive was completely Kaput and maybe also the DVD/CD drive as this had been acting up of late. New Mac time... Switched all my equip off at the plug last night as I turned in for bed and switched everything back on this morning and as if by magic the internal drive was there and I was able to eject the 'stuck' DVD. I have run Disk Utility a number of times and the drive appears to be fine. Also downloaded a copy of 'Smart Reporter' which shows it as being fine.
I recently installed the 64 bit Windows 7 Ultimate operating system onto my MacBook Pro 13 inch. I have the most basic Macbook Pro 13 inch with nothing fancy added. Whenever I load up the Windows 7 OS on my Macbook, it never utilizes or even realizes that I have the NVIDIA graphics card in my laptop. It instead believes I have some integrated graphics card that cannot even run the most basic of PC games. I know my laptop can run these games because on OSX it runs multiple games with higher requirements than these games I am trying to run on Windows.
Basic question: How do I get bootcamp or whatever else to make Windows 7 realize I have a NVIDIA card and drivers. Sorry if I am coming off as stupid or confusing.
So i am trying to change my apple boot camp drivers to nvidia's, but i think i must have downloaded the wrong ones, or done something wrong. I tried to install Geforce/Ion driver release 192.62, (from nvidia's site, i selected gefore 8 series) and when i ran the setup it said: 'nvidia setup program could not locate any drivers that are compatible with your hardware' . My questions are:
� Which drivers should i download? a link would be great.
� Are there any pre-requisites i must do, such as install version 170 first?
I am using an iMac 24" with 4gb ram, 500gb 5400 rpm HDD, and 8800 GS 512mb.
The reason I am trying this, is because when i play some online games, i often get bad lag spikes, but that chat is still running. Someone recommended me to 'update my drivers'.
I have a Macbook plastic, 2.4 GHz intel core 2 Duo with 2 GB of ram.My Mac is currently running on OS X, i used to have a 40 gig partition Windows XP, a couple of friends of mine where talking about how much they liked Windows 7 and finally i had had enough blue screens to say, sure ill switch, why not?... assuming it would not take longer then lets say a day at most, i set off on my quest.
FWI, im running an older model Macbook that was bought refurbished (not sure if that has anything to do with my problem). anyway i removed my previous partition, then using Boot Camp Assistant i repartitioned a 40 gig section for Windows 7. Then ran the installer. I have a copy of Windows 7 ultimate 86x. The Windows boot screen turned up, i had to reformat the partition so that i could install, no problems there. after all said and done the installation worked perfectly, up to a point... First problem that appeared was the lack of sound. i fixed that by downloading Realtek's High Def sound drivers.
Then it was the rest of the drivers for the macbook. heres where i run into my problem, i have the Mac OSX install discs 1 and 2. inserting the first disc the option of the auto run of the setup popped up i clicked run. and instead of the same old install drivers option all i have is the option to install the software that lets macbook airs share cd/dvd drives... needless to say i got frustrated and to put it lightly pissed off...
unsure of wtf was going on i looked it up online and really couldnt find anyone with the same problem, i found a web page saying that i should have the windows auto update itself and that should fix the problem. it did not. i dont know what the hell is going on. and im about this close to reinstalling windows xp and telling windows 7 to go **** itself...
I can't find the answers I know its been asked before.
Its the 2010 MBP 13"
I have Windows 7 Professional 64bit running through parallels 5 and it seems to be missing alot of drivers (wireless most importantly, but also audio etc). Where can I get these, is it the same as bootcamp drivers( are they on one of the disks that come with macs?).
So i installed windows 7 on my macbook (not aluminum) and when i go to install the boot camp drivers off of the retail leopard CD i get an error that says that I can't because it only installs on vista or XP. My laptop came with Tiger CD's so i can't get them off of there.
View 1 Replies View RelatedI've installed a legit copy of Windows XP, SP2. Nothing works, not my webcam, not my internet, not even the full resolution. The first time around that I did this, I had the DVD that came with my iMac, I installed the Windows drivers stuff off of it, and everything worked perfectly.
Can anyone point me in the direction of either a replacement for that DVD (.iso image or something?) or simply the required drivers that will let my iMac 8,1 connect to the web?
I boot camped my Macbook Unibody 13" (bought early 2009) with windows 7. However the bootcamp version was 2.0. I now cannot get drivers from the 3.0 bootcamp update.
View 2 Replies View RelatedI would like to add second DVD burner in my Mac Pro 2006.
I will connect it to one of the additional SATA connectors.
Which one of these burners would work under Mac OS X ?
Sony / NEC (Optiarc) DVD+/-RW AD-5240S
Asus DVD+/-RW DRW-24B1ST
Lite-ON DVD+/-RW IHAS424 LightScribe
I got IDECdRomOPTIARC_DVD_RW_AD-7170A_________________1.NC____ currently as first drive.
My G5 power mac has a standard CD burner in it that came with it when I got it - its given up the ghost. So I am going to replace it with a DVD Burner. Would I be right in thinking I can throw any DVD Burner in there? If i get the latest Pioneer Tray loading burner, that would slot right in there no problems right?
View 5 Replies View RelatedCan you burn disks at 16X on a G4. I have a MDD and I'm not sure how fast the optical drive bus is but I could swear its an ATA-3 bus, which I think is either 16MBps or 33MBps. Not quite sure. Does anyone have one and can vauch the full 16 speed while burning.
View 17 Replies View Related