Perhaps my Google skills are fail today, but I can't find anything there or on Microsoft's site about whether the Windows 7 Home editions retain the just-one-processor (with however many cores) rule. Anyone know if I'll be able to access all eight cores on my Mac Pro with Win 7 Home Premium?
View 5 RepliesPerhaps my Google skills are fail today, but I can't find anything there or on Microsoft's site about whether the Windows 7 Home editions retain the just-one-processor (with however many cores) rule. Anyone know if I'll be able to access all eight cores on my Mac Pro with Win 7 Home Premium?
View 2 Replies View RelatedI'm connecting my new Macbook Pro 15" running Snow Leopard, to my home network and of course it hooked up with my wireless router right away.
I have a NAS hard wired to a wireless router. The Mac sees all the folders and files just fine and can read/write.I have a Vista Home Premium PC hard wired to the same wireless router. The Users Folder is shared with full privileges as are the individual users folders. The firewall is off. It runs no "security software".
The Mac can see the Vista PC and also see the Users individual account folders but when I open them I can't see any of the files.I really don't know what direction to go. The Vista PC networked fine with an older Toshiba laptop that the Mac replaced.
Just for testing purposes, I installed a spare drive and put Windows 7 Home Premium x64 on my Mac Pro 1.1 last night. All of the advice given here on MacRumors so as to install the 64-bit version and get the AHCI working properly went flawlessly with one exception: Boot Camp doesn't like to restart in OSX from Windows after the AHCI patch. But the big issue is: Windows 7 Home Premium continues Microsoft's policy of not supporting multiple processors on any "Home" variant of Windows. (XP, Vista, 7). Task Manager reports only the two cores of the first CPU and ignores the second. To me this isn't important as I intend to continue using XP Pro for my rare ventures into Windows but is important for Mac Pro users considering purchasing Windows 7. If you wish to use Windows effectively on a multi-CPU Mac Pro, you must obtain the "Professional" or "Ultimate" versions.
View 24 Replies View RelatedI installed Windows Vista, and Vista boots up fine. However, I hold down the command keys when starting my computer up again, and it won't let me select Mac OS X. It just starts Vista.
On "My Computer" in Vista I see "Bootcamp (C" and "Macintosh HD (E in my Hard Disks Drives. Also, whenever I start up Vista it tells me something about a wrongly formatted drive. My files are still all in the Mactintosh HD drive, but I don't know how to start up Mac OS X.
Does anyone know how can i install Vista home premium on my imac? ive been using boot camp to do all the steps but im stuck at where i should choose NTFS format partition had disk. Seems like mine is FAT32.
This is what ive done;
1.Open up bootcamp assistant
2.Partition, divide equally(116GB each)
3.Insert Vista disk and start installation
4.Install Vista and insert CD key
5.custom installation
6.Now this is where i stuck
I have 4 options, and i should choose the last one which says bootcamp 116gb, but i cant click it since it says the disk need to have NTFS format. How can i set so that i partiton it to NTFS?
I have a new Mac but I also have a few bits of software that require windows. I just bought the new Parallels but am so far undecided on what version of windows to install.I have XP, but do not want to install it because support for it will eventually go the way of the dodo bird. Vista is out of the question so that leaves me with Windows 7.Now I guess I need the full version of Windows because on a Mac I cannot upgrade a new install. Having looked at all the Windows 7 versions I have come to the conclusion that I would like WINDOWS 7 STARTER because I don't need any of the advanced features (or the bloat) of 7 Home Premium.
View 4 Replies View RelatedI'm planning to install windows 7 64-bit in my mbp, problem is I looked at the requirements needed and it stated that I needed boot camp update 3.1. I checked my boot camp version and it stated that I had 3.0.1, tried using software update, but states that I had no updates available. What should I do? And what else do I have to keep in mind while installing windows using boot camp.
View 2 Replies View RelatedI've had Windows Vista Home Premium 64-bit installed on this Mac before, and it had nothing but problems. I couldn't get sound, even though the settings and everything said it was enabled and working, and etc. But, more importantly, games would run bad on it.I got Diablo 2 running (256 color game) on it, but the colors were terribly messed up. I'm wondering if this problem was due to the fact my Windows copy wasn't genuine (it was a copy of Windows that came with my mom's computer), if it was because that version was 64-bit, or if it was from my drivers (because there is a problem with these drivers supporting 256 color on the Mac OS).I've got the AppleIntelGMAX3100 video drivers, and they won't let me run Diablo 2 on my Mac side. On Windows, it'll let me run it, but I'm not sure if they cause the discoloration or not.
View 6 Replies View RelatedJust for testing purposes, I installed a spare drive and put Windows 7 Home Premium x64 on my Mac Pro 1.1 last night. All of the advice given here on MacRumors so as to install the 64-bit version and get the AHCI working properly went flawlessly with one exception: Boot Camp doesn't like to restart in OSX from Windows after the AHCI patch.But the big issue is:
Windows 7 Home Premium continues Microsoft's policy of not supporting multiple processors on any "Home" variant of Windows. (XP, Vista, 7)Task Manager reports only the two cores of the first CPU and ignores the second.
To me this isn't important as I intend to continue using XP Pro for my rare ventures into Windows but is important for Mac Pro users considering purchasing Windows 7. If you wish to use Windows effectively on a multi-CPU Mac Pro, you must obtain the "Professional" or "Ultimate" versions.
I installed Windows Vista, and Vista boots up fine. However, I hold down the command keys when starting my computer up again, and it won't let me select Mac OS X. It just starts Vista. On "My Computer" in Vista I see "Bootcamp (C" and "Macintosh HD (E in my Hard Disks Drives. Also, whenever I start up Vista it tells me something about a wrongly formatted drive. My files are still all in the Mactintosh HD drive, but I don't know how to start up Mac OS X.
View 1 Replies View RelatedI have installed Windows 7 Home Premium on my I Mac and now most programms don´t work and this is the reason why i want to install OSX again but I don´t know who this works.
Info:
iMac, Windows 7
I'm going to install windows 7 so i can play games. Would it be faster and give better performance for my games if i install home premium rather than ultimate?
View 9 Replies View RelatedOK so I just upgraded my Mac to Office 2011, which includes Remote Desktop Connection (RDP). I know that I cannot connect TO a Windows Vista Home Premium computer from the Mac, but according to the MS help files, I can connect FROM Vista Home Premium to the Mac.
I'm running both computers on the same wireless network, yet the Vista machine cannot connect to the Mac....can't even ping the Mac IP, as a matter of fact. The IPv4 addresses that show are the router IPs (from ipconfig), and they of course begin 192.168.xxx.xxx.
I just paid to upgrade QuickTime and received a registration code. Tho problem is there is no way to find the QuickTime control panel via the Windows 7 Home Premium control panel. How to I ovrcome this?
Info:
Windows 7
Changing from an older PC and buying iMac for Mom. Can she still use Qwest MSN Home Premium as her email service on an iMac. Have found conflicting information on internet. Trying to make it simple for her to use.
View 1 Replies View RelatedI'm connecting my new Macbook Pro 15" running Snow Leopard, to my home network and of course it hooked up with my wireless router right away. I have a NAS hard wired to a wireless router. The Mac sees all the folders and files just fine and can read/write. I have a Vista Home Premium PC hard wired to the same wireless router. The Users Folder is shared with full privileges as are the individual users folders. The firewall is off. It runs no "security software". The Mac can see the Vista PC and also see the Users individual account folders but when I open them I can't see any of the files. I really don't know what direction to go. The Vista PC networked fine with an older Toshiba laptop that the Mac replaced.
View 2 Replies View RelatedI just upgraded my Mac to Office 2011, which includes Remote Desktop Connection (RDP). I know that I cannot connect TO a Windows Vista Home Premium computer from the Mac, but according to the MS help files, I can connect from Vista Home Premium to the Mac. I'm running both computers on the same wireless network, yet the Vista machine cannot connect to the Mac....can't even ping the Mac IP, as a matter of fact. The IPv4 addresses that show are the router IPs (from ipconfig), and they of course begin 192.168.xxx.xxx.
View 5 Replies View RelatedI installed Vista Home Premium 32 bit on my brand new Macbook Pro 17 inch, except I am unable to connect to the internet. I just recently upgraded to Snow Leopard and was curious if all the drivers would have been installed correctly with Boot Camp. How do I get the internet to work on Vista?
View 1 Replies View RelatedI know what a horrid thing to do, but since they are offering it for 30 bucks for students I might just pick it up and install it for the rare occasions I need to boot up in windows. Question is will this version work on a Mac with bootcamp? I remember that XP required the professional version to work.
View 6 Replies View RelatedI've a late 2008 unibody macbook pro, a desktop running windows 7 Home premium and my housemate has a new mac mini and we have a lot of media across all devices. What I'm trying to do, is allow sharing between the macs and the desktop PC (where most of the media is), as well as general file transfer (when transferring uni files and the like). I've got them connected and sharing files, but the problem that I have, is that the transfer speed is extremely slow. I'm talking an average rate of 150KB/s (it took nearly 40mins to transfer 350MB of data).
The network transfer speeds on these two devices are limited to 54MBps (Wireless-G) due to our AP (I'm working on getting a better one), but that should still allow for really quick transfers, far faster than what I'm getting. At the moment, they're set up on the same workgroup, and just using the "Network" window in w7 to access the MBP. It's really frustrating that it's going so slow. How to get these transfer speeds up to their correct levels? Or recommend a better option? If I haven't explained anything properly, this is the guide I followed: [URL]
Is it possible to install the Windows Vista home premium Lite OS on a MacBook? Think it would be nice to save some precious HD space for other purposes.
View 2 Replies View RelatedI Have been agonizing over which Mac Pro would optimize the performance of my Digital Audio Workstations, Pro Tools in particular. Honestly, I have been back and forth with deliberating that now I am burnt out,
I hear Mixed Reviews on the New Nehalem 2.26 GHz Mac Pro Octo. I have also come to believe that 8 Cores Benefit Video More Than Audio, the diagnosis being that 8 Cores Is Overkill for audio. Is Pro Tools A Multi-Threaded App. And What Mac Pro Would Be Best For Audio?
iMac 27" i7 with OS X v 10.6.x when I create the bootcamp partition for windows 7 and I install from my original DVD of Windows 7. I format the partition during the install of windows 7 and on the first reboot after windows 7 first part of the install, the screen shows the Windows 7 logo and says continuing installation and then a black screen and then nothing.
I have to hard power off the iMac and then it starts over says the thing about the system didn't shut down properly and gives me the option to start safe mode etc. and does the same thing each time.
I would like to remote access my mac from home wherever I go. I don't want to do SSH or register at any website, I know it's better but all I'm looking for is to just be able to remote access my mac via screen share so here's what I've done so far.
I've opened the ports on the airport extreme base station (5900 etc.) and set the private ip address for the mac under port mapping.
I've set the private ip statically on my mac at home through system preferences
I've turned on screen share on my mac at home
I've recorded the public ip address for me to have for remotely logging in remotely
I've done all of these steps and I still can't remotely login to my mac at home. Now, the only thing I forgot to do is set the password under the screen sharing settings under sharing. Is that the only thing I need to do to be able to achieve successful remote access? Is there anything else I need to do besides creating a password for VNC and the step I've described above?
So two programs I use, Transmission and SABnsbd+, have web interfaces. It seems like this is tailored for use from another computer on the network. I would like to use the web interfaces to control my home computer while I am at work. To do this I think I need two things:
1 - a static IP. I think I can use [URL] to achieve this.
2 - somehow make some password protected entrance so that I can connect to my home computer securely.
Ideally, I'd like to access a URL that is my home computer, type in a login and password, and be presented with the program's web interface.
I am moving to a new job that will be about 30 minutes away from home, and I'd like to be able to access my home Mac Pro. I should have fairly decent internet at the new home and new job, so I'd like to set up some sort of VPN or remote access.
Would having DynDNS and then VNC acccess be the best way to do this? What about setting up a VPN so I can access files from a work machine?
Is it possible to access my time capsule / airport extreme hard drive away from home? Like when Im at work? I do have a mobileme account, but cannot figure this out.
View 4 Replies View RelatedI want to setup a public share to my public folder to window's xp users. When I do this, it seems to share the public folder AND the entire home directory for read/write. It doesn't seem to matter that I haven't shared that folder. This seems like a HUGE security hole to me. What am I doing wrong?
View 23 Replies View RelatedI'm getting conflicting info about this. Those who seem knowledgeable say you need a MAC at home to use BTMM with the new Airport but there are reports of people that are connecting to TC or USB disks over the internet without a MAC at home.
And to make matters worse it's confusing to begin with. Also, there doesn't seem to be much interest in this issue.
From the Apple forum:
Re: Accessing time capsule drives on MobileMe
Posted: Mar 6, 2009 2:51 PM
"I have been reading online and it appears that you must actually have a Mac connected to the TC to enable the drive sharing. This apparently still requires a Mac at home. The new thing is only that drives connected via USB to a TC or AEBS are visible when connecting to your Mac at home via Back-to-my-Mac. I was under the impression you could connect directly to the TC less the Mac connection, it appears thats not the case."
Reply
"that completely defeats the whole purpose I hope that is not the case. Is there any other way to access your timecapsule from another internet location? "
Reply
"Nope. I just finally got mine to work without any home computer connected to the shared disks on my AEBS. I didn't change anything from 5 minutes ago when it didn't work, but it does now. "
Here are all the steps I took:
1. Added MobileMe info on the Advanced screen
2. Checked the box to share disks over the Internet
3. Checked the box to share the disks using Bonjour
4. Added a wide-area Bonjour hostname
Hopefully this was just something they turned on rather than a grim promise of spotty service.
Reply
"I did not even have to do (2) (3) and (4).
But I think the service is rather slow right now. So you might not see your AirDisk appearing on the Finder immediately.
Also AirPort Utility will take advantage of wide-area bonjour and MobileMe service as well, by login onto MobileMe, you can remotely configure your TC."
Update: Here's another one (for my own info)
Quote:
" Ididn't even have to do that much. I have one of the original Time Capsules (purchased the first day they were available in the Apple Store). I updated to the latest firmware and the latest Airport Utility. Went into the MobileMe preference on the Time Capsule and entered my user name and password. I went to school, opened Finder, clicked on Time Capsule, it asked for my Time Capsule user name and password, and now could access the Time Capsule drive. I even copied a 24MB file over and it all worked just fine. The only thing I didn't do was try to copy something from my computer to the Time Capsule. I did try to do a backup via Time Machine but that did not work. Even if it had I don't think I would ever do backups remotely.
If it helps - I am a MobleMe subscriber/user, I have Back to my Mac turned on in the MobileMe preferences, I have a unibody MacBook, I'm using Mac OS X 10.5.6, and as I mentioned before - Time Capsule firmware 7.4.1 and Airport Utility 5.4.1. My Time Capsule is not connected to another Mac permanently. It is in my utility room connected only to my Comcast modem. "
end quote.
So it sure looks like you can do this. Not sure though as it's all a bit of a mess i'm not sure I want to step in.......
