OS X :: Connecting To Vista Home Premium PC / Unable To Access Shared Files
Mar 21, 2009
I'm connecting my new Macbook Pro 15" running Snow Leopard, to my home network and of course it hooked up with my wireless router right away.
I have a NAS hard wired to a wireless router. The Mac sees all the folders and files just fine and can read/write.I have a Vista Home Premium PC hard wired to the same wireless router. The Users Folder is shared with full privileges as are the individual users folders. The firewall is off. It runs no "security software".
The Mac can see the Vista PC and also see the Users individual account folders but when I open them I can't see any of the files.I really don't know what direction to go. The Vista PC networked fine with an older Toshiba laptop that the Mac replaced.
View 8 Replies
ADVERTISEMENT
Oct 11, 2009
I'm connecting my new Macbook Pro 15" running Snow Leopard, to my home network and of course it hooked up with my wireless router right away. I have a NAS hard wired to a wireless router. The Mac sees all the folders and files just fine and can read/write. I have a Vista Home Premium PC hard wired to the same wireless router. The Users Folder is shared with full privileges as are the individual users folders. The firewall is off. It runs no "security software". The Mac can see the Vista PC and also see the Users individual account folders but when I open them I can't see any of the files. I really don't know what direction to go. The Vista PC networked fine with an older Toshiba laptop that the Mac replaced.
View 2 Replies
View Related
May 30, 2010
OK so I just upgraded my Mac to Office 2011, which includes Remote Desktop Connection (RDP). I know that I cannot connect TO a Windows Vista Home Premium computer from the Mac, but according to the MS help files, I can connect FROM Vista Home Premium to the Mac.
I'm running both computers on the same wireless network, yet the Vista machine cannot connect to the Mac....can't even ping the Mac IP, as a matter of fact. The IPv4 addresses that show are the router IPs (from ipconfig), and they of course begin 192.168.xxx.xxx.
View 4 Replies
View Related
Mar 9, 2008
I installed Windows Vista, and Vista boots up fine. However, I hold down the command keys when starting my computer up again, and it won't let me select Mac OS X. It just starts Vista.
On "My Computer" in Vista I see "Bootcamp (C" and "Macintosh HD (E in my Hard Disks Drives. Also, whenever I start up Vista it tells me something about a wrongly formatted drive. My files are still all in the Mactintosh HD drive, but I don't know how to start up Mac OS X.
View 4 Replies
View Related
Dec 4, 2010
I just upgraded my Mac to Office 2011, which includes Remote Desktop Connection (RDP). I know that I cannot connect TO a Windows Vista Home Premium computer from the Mac, but according to the MS help files, I can connect from Vista Home Premium to the Mac. I'm running both computers on the same wireless network, yet the Vista machine cannot connect to the Mac....can't even ping the Mac IP, as a matter of fact. The IPv4 addresses that show are the router IPs (from ipconfig), and they of course begin 192.168.xxx.xxx.
View 5 Replies
View Related
Sep 27, 2009
I installed Vista Home Premium 32 bit on my brand new Macbook Pro 17 inch, except I am unable to connect to the internet. I just recently upgraded to Snow Leopard and was curious if all the drivers would have been installed correctly with Boot Camp. How do I get the internet to work on Vista?
View 1 Replies
View Related
Nov 12, 2009
I've had Windows Vista Home Premium 64-bit installed on this Mac before, and it had nothing but problems. I couldn't get sound, even though the settings and everything said it was enabled and working, and etc. But, more importantly, games would run bad on it.I got Diablo 2 running (256 color game) on it, but the colors were terribly messed up. I'm wondering if this problem was due to the fact my Windows copy wasn't genuine (it was a copy of Windows that came with my mom's computer), if it was because that version was 64-bit, or if it was from my drivers (because there is a problem with these drivers supporting 256 color on the Mac OS).I've got the AppleIntelGMAX3100 video drivers, and they won't let me run Diablo 2 on my Mac side. On Windows, it'll let me run it, but I'm not sure if they cause the discoloration or not.
View 6 Replies
View Related
Feb 21, 2010
I installed Windows Vista, and Vista boots up fine. However, I hold down the command keys when starting my computer up again, and it won't let me select Mac OS X. It just starts Vista. On "My Computer" in Vista I see "Bootcamp (C" and "Macintosh HD (E in my Hard Disks Drives. Also, whenever I start up Vista it tells me something about a wrongly formatted drive. My files are still all in the Mactintosh HD drive, but I don't know how to start up Mac OS X.
View 1 Replies
View Related
Feb 17, 2009
Is it possible to install the Windows Vista home premium Lite OS on a MacBook? Think it would be nice to save some precious HD space for other purposes.
View 2 Replies
View Related
Jul 6, 2009
Perhaps my Google skills are fail today, but I can't find anything there or on Microsoft's site about whether the Windows 7 Home editions retain the just-one-processor (with however many cores) rule. Anyone know if I'll be able to access all eight cores on my Mac Pro with Win 7 Home Premium?
View 5 Replies
View Related
Jan 8, 2008
I recently upgraded my pc to vista. When i was using xp, my macbook (running leopard) picked up my shared folders on my home network just fine, and several other wireless networks... now despite having the shared folders in vista set up and the network configured... leopard is showing nothing....its as if there's no network there.
the internet runs fine (on the network) but it won't access my shared files.. so there are no network problems, its a software issue either with vista or leopard... what am i doing wrong?
View 13 Replies
View Related
Aug 23, 2009
Does anyone know how can i install Vista home premium on my imac? ive been using boot camp to do all the steps but im stuck at where i should choose NTFS format partition had disk. Seems like mine is FAT32.
This is what ive done;
1.Open up bootcamp assistant
2.Partition, divide equally(116GB each)
3.Insert Vista disk and start installation
4.Install Vista and insert CD key
5.custom installation
6.Now this is where i stuck
I have 4 options, and i should choose the last one which says bootcamp 116gb, but i cant click it since it says the disk need to have NTFS format. How can i set so that i partiton it to NTFS?
View 9 Replies
View Related
Nov 20, 2009
I saw some threads about doing it wirelessly but right now I'm up at college and that is not a viable option for me. What I want to know is if I can connect to my home cpu or use the internet of my home computer. Thanks guys. Let me know if you need any specs from my laptop, my os is the latest version of leopard, not snow leopard tho.
View 1 Replies
View Related
Jul 28, 2010
Perhaps my Google skills are fail today, but I can't find anything there or on Microsoft's site about whether the Windows 7 Home editions retain the just-one-processor (with however many cores) rule. Anyone know if I'll be able to access all eight cores on my Mac Pro with Win 7 Home Premium?
View 2 Replies
View Related
Dec 21, 2009
I have the most recent iMac and Macbook Pro on my home network. I'm sharing files between machine and both are using WiFi through a Linksys Router. I have video files (avi's) on one machine that I'm playing on the other machine. The files play no problem but their is an intermittent halting. I probably wouldn't call it a stutter exactly. It stops playing and the screen halts at a particular frame, and then after a bit it starts playing again. I'm wondering if this is normal behaviour or if I have something setup incorrectly on my network. Also, I'm wondering what the solution to this is other than copying the files from one machine to the other.
View 1 Replies
View Related
Feb 8, 2009
Just setting up all my sweet new mac product. I am wanting to access my files that are shared on my pc remotely on my MacBook. Im just not sure what application to use to do so. Basically just want access to all my music and video.
View 7 Replies
View Related
Jun 21, 2012
I am unable to access a shared printer on my macbook air. the printer is attached to my iMac
Info:
MacBook Air (13-INCH, MID 2011), Mac OS X (10.7.4)
View 3 Replies
View Related
Oct 31, 2009
Just for testing purposes, I installed a spare drive and put Windows 7 Home Premium x64 on my Mac Pro 1.1 last night. All of the advice given here on MacRumors so as to install the 64-bit version and get the AHCI working properly went flawlessly with one exception: Boot Camp doesn't like to restart in OSX from Windows after the AHCI patch. But the big issue is: Windows 7 Home Premium continues Microsoft's policy of not supporting multiple processors on any "Home" variant of Windows. (XP, Vista, 7). Task Manager reports only the two cores of the first CPU and ignores the second. To me this isn't important as I intend to continue using XP Pro for my rare ventures into Windows but is important for Mac Pro users considering purchasing Windows 7. If you wish to use Windows effectively on a multi-CPU Mac Pro, you must obtain the "Professional" or "Ultimate" versions.
View 24 Replies
View Related
Dec 14, 2009
Changing from an older PC and buying iMac for Mom. Can she still use Qwest MSN Home Premium as her email service on an iMac. Have found conflicting information on internet. Trying to make it simple for her to use.
View 1 Replies
View Related
Oct 20, 2009
I know what a horrid thing to do, but since they are offering it for 30 bucks for students I might just pick it up and install it for the rare occasions I need to boot up in windows. Question is will this version work on a Mac with bootcamp? I remember that XP required the professional version to work.
View 6 Replies
View Related
Nov 30, 2009
I have a new Mac but I also have a few bits of software that require windows. I just bought the new Parallels but am so far undecided on what version of windows to install.I have XP, but do not want to install it because support for it will eventually go the way of the dodo bird. Vista is out of the question so that leaves me with Windows 7.Now I guess I need the full version of Windows because on a Mac I cannot upgrade a new install. Having looked at all the Windows 7 versions I have come to the conclusion that I would like WINDOWS 7 STARTER because I don't need any of the advanced features (or the bloat) of 7 Home Premium.
View 4 Replies
View Related
Mar 15, 2010
I'm planning to install windows 7 64-bit in my mbp, problem is I looked at the requirements needed and it stated that I needed boot camp update 3.1. I checked my boot camp version and it stated that I had 3.0.1, tried using software update, but states that I had no updates available. What should I do? And what else do I have to keep in mind while installing windows using boot camp.
View 2 Replies
View Related
Oct 12, 2010
I've a late 2008 unibody macbook pro, a desktop running windows 7 Home premium and my housemate has a new mac mini and we have a lot of media across all devices. What I'm trying to do, is allow sharing between the macs and the desktop PC (where most of the media is), as well as general file transfer (when transferring uni files and the like). I've got them connected and sharing files, but the problem that I have, is that the transfer speed is extremely slow. I'm talking an average rate of 150KB/s (it took nearly 40mins to transfer 350MB of data).
The network transfer speeds on these two devices are limited to 54MBps (Wireless-G) due to our AP (I'm working on getting a better one), but that should still allow for really quick transfers, far faster than what I'm getting. At the moment, they're set up on the same workgroup, and just using the "Network" window in w7 to access the MBP. It's really frustrating that it's going so slow. How to get these transfer speeds up to their correct levels? Or recommend a better option? If I haven't explained anything properly, this is the guide I followed: [URL]
View 2 Replies
View Related
Jan 5, 2010
Just for testing purposes, I installed a spare drive and put Windows 7 Home Premium x64 on my Mac Pro 1.1 last night. All of the advice given here on MacRumors so as to install the 64-bit version and get the AHCI working properly went flawlessly with one exception: Boot Camp doesn't like to restart in OSX from Windows after the AHCI patch.But the big issue is:
Windows 7 Home Premium continues Microsoft's policy of not supporting multiple processors on any "Home" variant of Windows. (XP, Vista, 7)Task Manager reports only the two cores of the first CPU and ignores the second.
To me this isn't important as I intend to continue using XP Pro for my rare ventures into Windows but is important for Mac Pro users considering purchasing Windows 7. If you wish to use Windows effectively on a multi-CPU Mac Pro, you must obtain the "Professional" or "Ultimate" versions.
View 1 Replies
View Related
Sep 8, 2014
I have installed Windows 7 Home Premium on my I Mac and now most programms don´t work and this is the reason why i want to install OSX again but I don´t know who this works.
Info:
iMac, Windows 7
View 4 Replies
View Related
Aug 24, 2010
I'm going to install windows 7 so i can play games. Would it be faster and give better performance for my games if i install home premium rather than ultimate?
View 9 Replies
View Related
Jun 13, 2012
I just paid to upgrade QuickTime and received a registration code. Tho problem is there is no way to find the QuickTime control panel via the Windows 7 Home Premium control panel. How to I ovrcome this?
Info:
Windows 7
View 5 Replies
View Related
Sep 29, 2009
I cannot believe I am actually in this position, but I accidentally reformatted my lacie 1TB external HD. The files were not overwritten as it was the most basic and quick format option, but they are not accessible.
Can anyone recommend a good data recovery app that works for OS X?
Anyone know what the best course of action would be?
Any advice would be greatly appreciated.
View 3 Replies
View Related
May 17, 2009
How do I print to a vista shared printer? I went into print/fax, click + to add printer, click windows button but shows nothing. not really sure where to go from here.
View 7 Replies
View Related
Jan 2, 2010
Having trouble connecting MB pro to imac....used to be able to but they wont connect anymore....also my ps3 wont connect either.....
View 4 Replies
View Related
