I installed Vista Home Premium 32 bit on my brand new Macbook Pro 17 inch, except I am unable to connect to the internet. I just recently upgraded to Snow Leopard and was curious if all the drivers would have been installed correctly with Boot Camp. How do I get the internet to work on Vista?
View 1 RepliesI'm connecting my new Macbook Pro 15" running Snow Leopard, to my home network and of course it hooked up with my wireless router right away. I have a NAS hard wired to a wireless router. The Mac sees all the folders and files just fine and can read/write. I have a Vista Home Premium PC hard wired to the same wireless router. The Users Folder is shared with full privileges as are the individual users folders. The firewall is off. It runs no "security software". The Mac can see the Vista PC and also see the Users individual account folders but when I open them I can't see any of the files. I really don't know what direction to go. The Vista PC networked fine with an older Toshiba laptop that the Mac replaced.
View 2 Replies View RelatedI just upgraded my Mac to Office 2011, which includes Remote Desktop Connection (RDP). I know that I cannot connect TO a Windows Vista Home Premium computer from the Mac, but according to the MS help files, I can connect from Vista Home Premium to the Mac. I'm running both computers on the same wireless network, yet the Vista machine cannot connect to the Mac....can't even ping the Mac IP, as a matter of fact. The IPv4 addresses that show are the router IPs (from ipconfig), and they of course begin 192.168.xxx.xxx.
View 5 Replies View RelatedI've had Windows Vista Home Premium 64-bit installed on this Mac before, and it had nothing but problems. I couldn't get sound, even though the settings and everything said it was enabled and working, and etc. But, more importantly, games would run bad on it.I got Diablo 2 running (256 color game) on it, but the colors were terribly messed up. I'm wondering if this problem was due to the fact my Windows copy wasn't genuine (it was a copy of Windows that came with my mom's computer), if it was because that version was 64-bit, or if it was from my drivers (because there is a problem with these drivers supporting 256 color on the Mac OS).I've got the AppleIntelGMAX3100 video drivers, and they won't let me run Diablo 2 on my Mac side. On Windows, it'll let me run it, but I'm not sure if they cause the discoloration or not.
View 6 Replies View RelatedI installed Windows Vista, and Vista boots up fine. However, I hold down the command keys when starting my computer up again, and it won't let me select Mac OS X. It just starts Vista. On "My Computer" in Vista I see "Bootcamp (C" and "Macintosh HD (E in my Hard Disks Drives. Also, whenever I start up Vista it tells me something about a wrongly formatted drive. My files are still all in the Mactintosh HD drive, but I don't know how to start up Mac OS X.
View 1 Replies View RelatedIs it possible to install the Windows Vista home premium Lite OS on a MacBook? Think it would be nice to save some precious HD space for other purposes.
View 2 Replies View RelatedOK so I just upgraded my Mac to Office 2011, which includes Remote Desktop Connection (RDP). I know that I cannot connect TO a Windows Vista Home Premium computer from the Mac, but according to the MS help files, I can connect FROM Vista Home Premium to the Mac.
I'm running both computers on the same wireless network, yet the Vista machine cannot connect to the Mac....can't even ping the Mac IP, as a matter of fact. The IPv4 addresses that show are the router IPs (from ipconfig), and they of course begin 192.168.xxx.xxx.
I'm connecting my new Macbook Pro 15" running Snow Leopard, to my home network and of course it hooked up with my wireless router right away.
I have a NAS hard wired to a wireless router. The Mac sees all the folders and files just fine and can read/write.I have a Vista Home Premium PC hard wired to the same wireless router. The Users Folder is shared with full privileges as are the individual users folders. The firewall is off. It runs no "security software".
The Mac can see the Vista PC and also see the Users individual account folders but when I open them I can't see any of the files.I really don't know what direction to go. The Vista PC networked fine with an older Toshiba laptop that the Mac replaced.
I installed Windows Vista, and Vista boots up fine. However, I hold down the command keys when starting my computer up again, and it won't let me select Mac OS X. It just starts Vista.
On "My Computer" in Vista I see "Bootcamp (C" and "Macintosh HD (E in my Hard Disks Drives. Also, whenever I start up Vista it tells me something about a wrongly formatted drive. My files are still all in the Mactintosh HD drive, but I don't know how to start up Mac OS X.
Does anyone know how can i install Vista home premium on my imac? ive been using boot camp to do all the steps but im stuck at where i should choose NTFS format partition had disk. Seems like mine is FAT32.
This is what ive done;
1.Open up bootcamp assistant
2.Partition, divide equally(116GB each)
3.Insert Vista disk and start installation
4.Install Vista and insert CD key
5.custom installation
6.Now this is where i stuck
I have 4 options, and i should choose the last one which says bootcamp 116gb, but i cant click it since it says the disk need to have NTFS format. How can i set so that i partiton it to NTFS?
Just for testing purposes, I installed a spare drive and put Windows 7 Home Premium x64 on my Mac Pro 1.1 last night. All of the advice given here on MacRumors so as to install the 64-bit version and get the AHCI working properly went flawlessly with one exception: Boot Camp doesn't like to restart in OSX from Windows after the AHCI patch. But the big issue is: Windows 7 Home Premium continues Microsoft's policy of not supporting multiple processors on any "Home" variant of Windows. (XP, Vista, 7). Task Manager reports only the two cores of the first CPU and ignores the second. To me this isn't important as I intend to continue using XP Pro for my rare ventures into Windows but is important for Mac Pro users considering purchasing Windows 7. If you wish to use Windows effectively on a multi-CPU Mac Pro, you must obtain the "Professional" or "Ultimate" versions.
View 24 Replies View RelatedChanging from an older PC and buying iMac for Mom. Can she still use Qwest MSN Home Premium as her email service on an iMac. Have found conflicting information on internet. Trying to make it simple for her to use.
View 1 Replies View RelatedPerhaps my Google skills are fail today, but I can't find anything there or on Microsoft's site about whether the Windows 7 Home editions retain the just-one-processor (with however many cores) rule. Anyone know if I'll be able to access all eight cores on my Mac Pro with Win 7 Home Premium?
View 5 Replies View RelatedI know what a horrid thing to do, but since they are offering it for 30 bucks for students I might just pick it up and install it for the rare occasions I need to boot up in windows. Question is will this version work on a Mac with bootcamp? I remember that XP required the professional version to work.
View 6 Replies View RelatedI have a new Mac but I also have a few bits of software that require windows. I just bought the new Parallels but am so far undecided on what version of windows to install.I have XP, but do not want to install it because support for it will eventually go the way of the dodo bird. Vista is out of the question so that leaves me with Windows 7.Now I guess I need the full version of Windows because on a Mac I cannot upgrade a new install. Having looked at all the Windows 7 versions I have come to the conclusion that I would like WINDOWS 7 STARTER because I don't need any of the advanced features (or the bloat) of 7 Home Premium.
View 4 Replies View RelatedI'm planning to install windows 7 64-bit in my mbp, problem is I looked at the requirements needed and it stated that I needed boot camp update 3.1. I checked my boot camp version and it stated that I had 3.0.1, tried using software update, but states that I had no updates available. What should I do? And what else do I have to keep in mind while installing windows using boot camp.
View 2 Replies View RelatedI've a late 2008 unibody macbook pro, a desktop running windows 7 Home premium and my housemate has a new mac mini and we have a lot of media across all devices. What I'm trying to do, is allow sharing between the macs and the desktop PC (where most of the media is), as well as general file transfer (when transferring uni files and the like). I've got them connected and sharing files, but the problem that I have, is that the transfer speed is extremely slow. I'm talking an average rate of 150KB/s (it took nearly 40mins to transfer 350MB of data).
The network transfer speeds on these two devices are limited to 54MBps (Wireless-G) due to our AP (I'm working on getting a better one), but that should still allow for really quick transfers, far faster than what I'm getting. At the moment, they're set up on the same workgroup, and just using the "Network" window in w7 to access the MBP. It's really frustrating that it's going so slow. How to get these transfer speeds up to their correct levels? Or recommend a better option? If I haven't explained anything properly, this is the guide I followed: [URL]
Just for testing purposes, I installed a spare drive and put Windows 7 Home Premium x64 on my Mac Pro 1.1 last night. All of the advice given here on MacRumors so as to install the 64-bit version and get the AHCI working properly went flawlessly with one exception: Boot Camp doesn't like to restart in OSX from Windows after the AHCI patch.But the big issue is:
Windows 7 Home Premium continues Microsoft's policy of not supporting multiple processors on any "Home" variant of Windows. (XP, Vista, 7)Task Manager reports only the two cores of the first CPU and ignores the second.
To me this isn't important as I intend to continue using XP Pro for my rare ventures into Windows but is important for Mac Pro users considering purchasing Windows 7. If you wish to use Windows effectively on a multi-CPU Mac Pro, you must obtain the "Professional" or "Ultimate" versions.
I have installed Windows 7 Home Premium on my I Mac and now most programms don´t work and this is the reason why i want to install OSX again but I don´t know who this works.
Info:
iMac, Windows 7
I'm going to install windows 7 so i can play games. Would it be faster and give better performance for my games if i install home premium rather than ultimate?
View 9 Replies View RelatedI just paid to upgrade QuickTime and received a registration code. Tho problem is there is no way to find the QuickTime control panel via the Windows 7 Home Premium control panel. How to I ovrcome this?
Info:
Windows 7
I want to install windows vista on my macbook pro 4,1, I bought it second hand and the seller didn't have the 2 install discs. I need these after installation of windows to install the drivers, but as I don't have them is there another way of installing them?
View 2 Replies View RelatedPerhaps my Google skills are fail today, but I can't find anything there or on Microsoft's site about whether the Windows 7 Home editions retain the just-one-processor (with however many cores) rule. Anyone know if I'll be able to access all eight cores on my Mac Pro with Win 7 Home Premium?
View 2 Replies View RelatedI saw some threads about doing it wirelessly but right now I'm up at college and that is not a viable option for me. What I want to know is if I can connect to my home cpu or use the internet of my home computer. Thanks guys. Let me know if you need any specs from my laptop, my os is the latest version of leopard, not snow leopard tho.
View 1 Replies View RelatedRunning Vista on my mac, when I switch to windows it cannot pick up a wireless card.
View 6 Replies View RelatedI'm trying to share the internet connection on my windows vista partition. Until now it has been fine, but all of a sudden, yesterday, it stopped working. iPhone and mac both show self assigned IPs. I tried resetting and setting up a new ad hoc network and checked settings to make sure internet sharing was enabled, but still the mac and iPhone are not given their own IPs.
View 1 Replies View RelatedWithout going into too much detail about the crazy logistics of the two networks that are available here, this is the situation:
Up until last Sunday (it was working fine at about 11:45 Saturday night right before I left), I had always been able to use one particular network jack. I'd just plug in my RJ-45 (Cat 5) cable and power up the MB and be on my way. Well, when I came in on Sunday, the jack is dead. There are other jacks to this network in the building, but the closest one is about 75'-100' away. I'd just buy a longer cable, but I don't think they want me running RJ-45 across the office when I need to use it. Not only that, but the company that supplies that network will be moving out in June, and most likely shutting off all their jacks in the building.
Now, we have the other network here that is obviously still working, but I do not have the credentials to connect to it. When I plug in the network cable, I get the familiar "None of your preferred networks are available" dialogue box.
So my question is this - is there some way that I can tap into one of the existing networks and bypass the company stuff by just connecting to the Internet through the DSL account we have at home? I mean, if you have a network jack that is working, you don't need to have access to that particular network to get out onto the Internet as long as you have a login and password to a network, right?
I am going to move into a new house soon. I am looking to network the house, so I can use the internet anywhere, share movies,etc. This is my current setup at my apartment.
1 x Mac Mini connected to my TV in the lounge
1 x Apple TV connected to the TV in the bedroom
1 x Main PC in the study room (which all my movies/tv series/music/etc... is stored)
2 x Laptops
1 x Apple 20" Cinema Display
The mac mini is connected via ethernet to the router & the apple tv is connected via WiFi. Its currently a small place so the apple tv can access the router's wireless signal. This is what I have in mind for our new house which kinda big in size. Trash the PC and buy a mac mini server and external NAS storage. The NAS storage will store all the movies/tv series/mp3's/etc. I currently have a ubiquity nanostation2 which I can setup to boost the wireless signal throughout the house so we can use wireless anywhere in the house & tv mac mini, laptops & apple tv can access the wireless (so i do not have to install ethernet cables throughout the house). Also in the future, I would want to install security cameras outside the house (still trying to find a good mac OS X security camera software). Before I buy the mac mini server & NAS, am i missing anything or is there another better solution?
I just recently bought this MacBook. It apparently works everywhere else except on my home connection. I have a good feeling it probably has to do with my router. I have also tried to restart my macbook/router.
View 4 Replies View RelatedI can connect everywhere else with no problem... At hoe wired or wirelessly won't work...
Info:
MacBook Pro (13-inch Mid 2009), Mac OS X (10.7.3)
