OS X :: RDP From Vista Home Premium To Mac With Office 2011
Dec 4, 2010
I just upgraded my Mac to Office 2011, which includes Remote Desktop Connection (RDP). I know that I cannot connect TO a Windows Vista Home Premium computer from the Mac, but according to the MS help files, I can connect from Vista Home Premium to the Mac. I'm running both computers on the same wireless network, yet the Vista machine cannot connect to the Mac....can't even ping the Mac IP, as a matter of fact. The IPv4 addresses that show are the router IPs (from ipconfig), and they of course begin 192.168.xxx.xxx.
I'm connecting my new Macbook Pro 15" running Snow Leopard, to my home network and of course it hooked up with my wireless router right away. I have a NAS hard wired to a wireless router. The Mac sees all the folders and files just fine and can read/write. I have a Vista Home Premium PC hard wired to the same wireless router. The Users Folder is shared with full privileges as are the individual users folders. The firewall is off. It runs no "security software". The Mac can see the Vista PC and also see the Users individual account folders but when I open them I can't see any of the files. I really don't know what direction to go. The Vista PC networked fine with an older Toshiba laptop that the Mac replaced.
I installed Vista Home Premium 32 bit on my brand new Macbook Pro 17 inch, except I am unable to connect to the internet. I just recently upgraded to Snow Leopard and was curious if all the drivers would have been installed correctly with Boot Camp. How do I get the internet to work on Vista?
I've had Windows Vista Home Premium 64-bit installed on this Mac before, and it had nothing but problems. I couldn't get sound, even though the settings and everything said it was enabled and working, and etc. But, more importantly, games would run bad on it.I got Diablo 2 running (256 color game) on it, but the colors were terribly messed up. I'm wondering if this problem was due to the fact my Windows copy wasn't genuine (it was a copy of Windows that came with my mom's computer), if it was because that version was 64-bit, or if it was from my drivers (because there is a problem with these drivers supporting 256 color on the Mac OS).I've got the AppleIntelGMAX3100 video drivers, and they won't let me run Diablo 2 on my Mac side. On Windows, it'll let me run it, but I'm not sure if they cause the discoloration or not.
I installed Windows Vista, and Vista boots up fine. However, I hold down the command keys when starting my computer up again, and it won't let me select Mac OS X. It just starts Vista. On "My Computer" in Vista I see "Bootcamp (C" and "Macintosh HD (E in my Hard Disks Drives. Also, whenever I start up Vista it tells me something about a wrongly formatted drive. My files are still all in the Mactintosh HD drive, but I don't know how to start up Mac OS X.
Is it possible to install the Windows Vista home premium Lite OS on a MacBook? Think it would be nice to save some precious HD space for other purposes.
OK so I just upgraded my Mac to Office 2011, which includes Remote Desktop Connection (RDP). I know that I cannot connect TO a Windows Vista Home Premium computer from the Mac, but according to the MS help files, I can connect FROM Vista Home Premium to the Mac.
I'm running both computers on the same wireless network, yet the Vista machine cannot connect to the Mac....can't even ping the Mac IP, as a matter of fact. The IPv4 addresses that show are the router IPs (from ipconfig), and they of course begin 192.168.xxx.xxx.
I'm connecting my new Macbook Pro 15" running Snow Leopard, to my home network and of course it hooked up with my wireless router right away.
I have a NAS hard wired to a wireless router. The Mac sees all the folders and files just fine and can read/write.I have a Vista Home Premium PC hard wired to the same wireless router. The Users Folder is shared with full privileges as are the individual users folders. The firewall is off. It runs no "security software".
The Mac can see the Vista PC and also see the Users individual account folders but when I open them I can't see any of the files.I really don't know what direction to go. The Vista PC networked fine with an older Toshiba laptop that the Mac replaced.
I installed Windows Vista, and Vista boots up fine. However, I hold down the command keys when starting my computer up again, and it won't let me select Mac OS X. It just starts Vista.
On "My Computer" in Vista I see "Bootcamp (C" and "Macintosh HD (E in my Hard Disks Drives. Also, whenever I start up Vista it tells me something about a wrongly formatted drive. My files are still all in the Mactintosh HD drive, but I don't know how to start up Mac OS X.
Does anyone know how can i install Vista home premium on my imac? ive been using boot camp to do all the steps but im stuck at where i should choose NTFS format partition had disk. Seems like mine is FAT32.
This is what ive done; 1.Open up bootcamp assistant 2.Partition, divide equally(116GB each) 3.Insert Vista disk and start installation 4.Install Vista and insert CD key 5.custom installation 6.Now this is where i stuck
I have 4 options, and i should choose the last one which says bootcamp 116gb, but i cant click it since it says the disk need to have NTFS format. How can i set so that i partiton it to NTFS?
One of the coolest features I was looking for in Office Home 2011 was the co-authoring online, like you can do it in google docs. Yet I can't find the option. Do you need the business version with share-point for that? Further, do other people need to have the new version too?
Just for testing purposes, I installed a spare drive and put Windows 7 Home Premium x64 on my Mac Pro 1.1 last night. All of the advice given here on MacRumors so as to install the 64-bit version and get the AHCI working properly went flawlessly with one exception: Boot Camp doesn't like to restart in OSX from Windows after the AHCI patch. But the big issue is: Windows 7 Home Premium continues Microsoft's policy of not supporting multiple processors on any "Home" variant of Windows. (XP, Vista, 7). Task Manager reports only the two cores of the first CPU and ignores the second. To me this isn't important as I intend to continue using XP Pro for my rare ventures into Windows but is important for Mac Pro users considering purchasing Windows 7. If you wish to use Windows effectively on a multi-CPU Mac Pro, you must obtain the "Professional" or "Ultimate" versions.
Changing from an older PC and buying iMac for Mom. Can she still use Qwest MSN Home Premium as her email service on an iMac. Have found conflicting information on internet. Trying to make it simple for her to use.
Perhaps my Google skills are fail today, but I can't find anything there or on Microsoft's site about whether the Windows 7 Home editions retain the just-one-processor (with however many cores) rule. Anyone know if I'll be able to access all eight cores on my Mac Pro with Win 7 Home Premium?
I know what a horrid thing to do, but since they are offering it for 30 bucks for students I might just pick it up and install it for the rare occasions I need to boot up in windows. Question is will this version work on a Mac with bootcamp? I remember that XP required the professional version to work.
I have a new Mac but I also have a few bits of software that require windows. I just bought the new Parallels but am so far undecided on what version of windows to install.I have XP, but do not want to install it because support for it will eventually go the way of the dodo bird. Vista is out of the question so that leaves me with Windows 7.Now I guess I need the full version of Windows because on a Mac I cannot upgrade a new install. Having looked at all the Windows 7 versions I have come to the conclusion that I would like WINDOWS 7 STARTER because I don't need any of the advanced features (or the bloat) of 7 Home Premium.
I'm planning to install windows 7 64-bit in my mbp, problem is I looked at the requirements needed and it stated that I needed boot camp update 3.1. I checked my boot camp version and it stated that I had 3.0.1, tried using software update, but states that I had no updates available. What should I do? And what else do I have to keep in mind while installing windows using boot camp.
I've a late 2008 unibody macbook pro, a desktop running windows 7 Home premium and my housemate has a new mac mini and we have a lot of media across all devices. What I'm trying to do, is allow sharing between the macs and the desktop PC (where most of the media is), as well as general file transfer (when transferring uni files and the like). I've got them connected and sharing files, but the problem that I have, is that the transfer speed is extremely slow. I'm talking an average rate of 150KB/s (it took nearly 40mins to transfer 350MB of data).
The network transfer speeds on these two devices are limited to 54MBps (Wireless-G) due to our AP (I'm working on getting a better one), but that should still allow for really quick transfers, far faster than what I'm getting. At the moment, they're set up on the same workgroup, and just using the "Network" window in w7 to access the MBP. It's really frustrating that it's going so slow. How to get these transfer speeds up to their correct levels? Or recommend a better option? If I haven't explained anything properly, this is the guide I followed: [URL]
Just for testing purposes, I installed a spare drive and put Windows 7 Home Premium x64 on my Mac Pro 1.1 last night. All of the advice given here on MacRumors so as to install the 64-bit version and get the AHCI working properly went flawlessly with one exception: Boot Camp doesn't like to restart in OSX from Windows after the AHCI patch.But the big issue is:
Windows 7 Home Premium continues Microsoft's policy of not supporting multiple processors on any "Home" variant of Windows. (XP, Vista, 7)Task Manager reports only the two cores of the first CPU and ignores the second.
To me this isn't important as I intend to continue using XP Pro for my rare ventures into Windows but is important for Mac Pro users considering purchasing Windows 7. If you wish to use Windows effectively on a multi-CPU Mac Pro, you must obtain the "Professional" or "Ultimate" versions.
I have installed Windows 7 Home Premium on my I Mac and now most programms don´t work and this is the reason why i want to install OSX again but I don´t know who this works.
I'm going to install windows 7 so i can play games. Would it be faster and give better performance for my games if i install home premium rather than ultimate?
I just paid to upgrade QuickTime and received a registration code. Tho problem is there is no way to find the QuickTime control panel via the Windows 7 Home Premium control panel. How to I ovrcome this?
I updated to Lion on my desktop a few months ago and I swear now I can't read older Microsoft word and Excel documents correctly on this computer using Office 2011. The document opens and you can see all of the data in a preview window (from finder) but once it opens fully the data/words are not there. I have Lion on a brand new Macbook Pro I just purchased and installed the Microsoft Office 2011 and it opened the excel document I was having trouble with fine.I can't find many links for Office for Mac issues.
I forgot my administrator's password for my home computer. I purchased office 2008 for mac with a free upgrade to office 2011. I upgraded it to 2011 when it came out (late 2010/early 2011). I have since made a new password and forgotten what it is. The mac tells me to reinstall my microsoft office but when I do, with the office 2008 disc, it tells me I have MORE RECENT SOFTWARE and to use that. I did it on line and cannot find it again.
Perhaps my Google skills are fail today, but I can't find anything there or on Microsoft's site about whether the Windows 7 Home editions retain the just-one-processor (with however many cores) rule. Anyone know if I'll be able to access all eight cores on my Mac Pro with Win 7 Home Premium?
So I got Office 2011; it's pretty good stuff. Unlike Windows based systems, it did not remove Office 2008 which is different. I am wondering if there is any reason that I should or should not remove 2008 since I have 2011 (exact same programs).
I saw some threads about doing it wirelessly but right now I'm up at college and that is not a viable option for me. What I want to know is if I can connect to my home cpu or use the internet of my home computer. Thanks guys. Let me know if you need any specs from my laptop, my os is the latest version of leopard, not snow leopard tho.
I was at an Apple Store this weekend and playing around with the new MBA. I noticed that they had MS Office 2011 installed already. I checked out the version number and it's 14.0.1, build 101008. Anybody knows if this version is just Apple store, or it'll be an update?
I thought I saw somewhere that there is a trial of Office 2011. I can't seem to find it anywhere. anyone know where I can get a trial? I want to play with the OUtlook vs. using the web access that I have now before I commit to $180
