I have the OEM version of Windows XP Pro Sp2 and i am having trouble installing it using boot camp 2.0. The general opinion seems to be that the OEM version works fine so would someone
View 9 RepliesI am planning to run Windows XP on my Macbook using Boot Camp and I have not yet bought my copy of Windows XP. My question is, is it better to buy a "full purchase product" (FPP) or an OEM (Original Equipment Manufacturer) version of Windows? The OEM version is about $80 less than the FPP, but does not have Microsoft support and is really not intended for consumer use.
View 3 Replies View RelatedI am currently happy with running XP on my mac with boot camp but I am not sure how to check if I have the latest version of it. How can I do that??
View 1 Replies View RelatedAfter my other thread and a bit more research I have decided that Boot camp will suit my needs the best.My next question, which Version of Windows will work the best on the MBA. I know 100% that it won't be Vista. But cant decide between Win XP or Win 7.
View 14 Replies View RelatedI presently have a 13" MacBook Pro (First-Gen Unibody from Late 2008) running Windows XP in Boot Camp and Snow Leopard. I'm about to buy a new 13" MacBook Air to replace my MBP and will need to install Windows in Boot Camp (for work and for gaming).Which version(s) of Windows can I install in Boot Camp on a new MBA? I heard that only Windows 7 can be installed but would like to verify if this is correct.
View 5 Replies View RelatedI have been trying to install Windows 7 (yes, legit copy) to my Macbook Pro the whole day, but I keep on getting this error message saying "Press any key to boot from cd or dvd . . . ."
When I press any key on the keyboard, nothing happens. I know this copy works because I've tried this on VMWare 3. (I'm going to Boot Camp of BIOSHOCK!)
What I've Tried:
Deleted partition, recreate partition and choose the Windows 7 disk as startup disk.
Well I installed Vista Ultimate using boot camp on my 27 inch iMac using 10.6.2 and now I can't get it to boot in OSX. I tried holding the command key when rebooting but it just goes into the windows part. Looks like windows took over. Does anybody know how I can get it to boot in Leopard?
View 3 Replies View RelatedI have an '08 Octo 2.8.
I created a Boot Camp Partition (an entire drive, actually) and installed XP. The install went off without a hitch ... Except, having rebooted to Mac OS X (10.6.1) there is no way to boot Windows again. Going to Preferences->Boot Disk shows no Book Camp bootable drive.
I'm trying to install Windows 7 and can't get the boot camp assistant to partition my drive. The drive in question is 500GB with over 200GB free space. I want a Windows partition of 35-40GB.On first attempt I kept getting the cannot move files error when trying to partition. I read up on the error online, and most people suggested issues with parallels or needing to use idefrag. I had parallels on my machine at one point, but am not sure if there are any problem folders still hiding somewhere. Any tips on that part?I ran idefrag overnight last night. When I booted the machine up this morning, I launched it again to verify that the disk was defraged. Boot camp still doesn't want to play.
View 8 Replies View RelatedI have a Macbook Pro and I'm hoping to install Windows Vista via Boot Camp. Is it possible to do this with a Dell reinstallation DVD that came with my Dell laptop?
the first steps of boot camp came simple and easy partitioned and load installation disk but when i click on "install now", an error came up stating "windows could not retrieve information about the disks on this computer"
View 1 Replies View RelatedI thought maybe that has something to do with PAL vs. NTSC but both the iMac and the window 7 software were bought in Germany (where I live) so I just don't know.
Last year I also bought and installed Parallels on my iMac but never really used it. The reason I'd like to install windows is because I really need to learn AUTOCAD and it runs on windows.
I just mention it because I guess I have the option of using Parallels (though it still seems to have an old version of Vista on it and I can't get rid of it).
I don't have an install CD and don't want to burn 100 dollars for it. Is there a way to do it without the CD.
View 8 Replies View RelatedI just got my new 27" iMac, and wanted to install Windows 7 64 bit via Boot Camp.The installation went fine, but now when the iMac restarts, after the Windows loading screen, I just get a black screen, no display.Windows works, I was able to use it in VMware. I read here and there that there were problems with the ATI card in Windows 7, so I tried to install the Boot Camp drivers in VMware, even the ATI Catalyst ones.Even after that, no display in Windows.I read that someone here used a external display to make windows work at first.
View 7 Replies View RelatedI have a Macbook and I had Windows XP on my Boot Camp partition, but I wanted to upgrade to Windows Vista because my friend recently found their Vista install disc. I backed up all of my information from my Windows partition on my external hard drive, booted the Apple side, and ran Boot Camp Assistant. It made the separate partition, but then when it asked me to install Windows it said insert the Windows install disc, so I did... but instead of my Macbook restarting and installing Windows... it restarts... then you hear the CD drive/optical drive speed up A LOT, then it slows down, and ejects my CD, instead of running the setup. I became so desperate to get Windows back on my Mac, that I tried installing Boot Camp with my friend's XP SP 2 install CD. No luck. I thought my CD drive was damaged but it's not.
For starters, the computer recognizes when I insert the XP & Vista CDs... it appears as, "XP_HOME_SP_2" with a CD icon on my desktop on the Mac side...
I have used disk utility to take DMG files such as OSX and create a disk image onto the flash drive and upgrade / reinstall the OS on my mac.
I don't have any blank DVD's to burn the win 7 ISO onto so I tried doing the same by putting the ISO onto a flash drive and it doesn't work in Disk Utility. I tried doing it on a XP computer which was (I think) successful in putting the disk image onto the flash drive.
Now when I reboot and hold option I don't have any option to start up the computer other than the Mac HD.
I have installed Paragon to be able to read and write NTFS files / disks.
Does anyone know if its possible to install win 7 via USB onto a mac or am I wasting my time?
I have a new MacBook Pro 13-inch mid-2010 model, and I noticed that when I am in Windows 7 and try to use my headphones through the audio jack, I get no sound. I looked on Apple's website, found the 3.1.3 patch which claims will fix headphone sound, downloaded it, but when I went to install it, I got this error:
"The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded may be missing, or the upgrade patch may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade patch."
This is frustrating because I DO have Boot Camp 3.1.0 installed, which I assume is the version needed to upgrade, and Boot Camp IS installed. I also downloaded the 32-bit version as that is the version of Windows 7 I have, and just for jollies I tried the 64-bit version but that yielded the same error.
What am I doing wrong here? How can I install this patch? I would very much like to be able to have functional headphones.
Is it possible to install Windows 7 on an internal disk via Boot Camp and then remove this disk and use it as an external drive? I have two drives for my mini, one in use and one in an external case; unfortunately, neither have room for everything plus Windows. If the answer to this question is no, then I'll buy a bigger drive. I'd just like to avoid this if possible (I already have a ton of external drives and not enough ports to plug them into).
View 4 Replies View RelatedIs it possible to install windows XP onto boot camp as an .iso without having to create a cd. If cd is needed can you tell me what software i need to get to burn it correctly so i can run Windows XP on boot camp.
View 13 Replies View RelatedI am about to install XP Home under Boot Camp and have just read through the Apple Boot Camp installation guide and noticed at the start, that it states that "you must use" Windows XP Home with SP2 or above. I have a very old version of XP Home and wondered how I can tell if it already has SP2 on it? The original Windows XP box has "version 2002" on it but no other indication that it has been service packed. I don't want to try it, just in case it causes installation problems.
View 13 Replies View RelatedSo I finally got around to installing the boot camp 3.0 drivers from my SL cd; however, I keep getting this error in which the installer refuses to install the new boot camp drivers. I'm running the 2.1 drivers just fine. The error I get is:
"The installer encountered errors before Boot Camp could be configured"
I'm going to try to uninstall the 2.1 drivers and see if I can install the 3.0 again, but I doubt it will work. Others have had this issue:
[URL]
Has anyone else run into this? I'm running XP sp3. I think this may be an sp3 issue, but I'm not sure how to get around this. I could manually install the 3.0 drivers, but how do I know which ones to choose? Can someone possibly list the drivers on the SL cd that I need to install manually? (I have a late 2009 2.8ghz 15'' unibody macbook pro.
I have been trying to install Windows 7 X86 RC1 on my brand new early 2009 iMac and have been having the same problem every time.
Initial installation goes very smoothly, but all the trouble begins when I load the Boot Camp setup.exe from the Leopard disc.
During Boot Camp installation I get a compatibility warning about some of the Apple Boot Camp drivers working correctly with this version of Windows.
If I go ahead with the installation then what happens is I get a BSOD and then Windows becomes un-bootable. This is repeatable as it happens every single time I do the installation.
Things initially seem to work up until I load boot camp assistant from the Leopard install disc, so I'm wondering if there are other drivers available that play well with Windows 7 for my iMac that I can try? I've followed several Boot Camp tutorials for iMac with Win7 and am pretty sure I am doing everything correctly, but things just aren't working.
I've been trying to install the latest update (2.1) to Boot Camp via software update without success. Windows refuse to complete the installation. Does anyone have experienced the same problem?
View 11 Replies View Relatedby our accountants, to use Sage accounting software. I believe it is windows based only. We have plenty of computers here, all Mac, dont really want to buy another one (PC) to run this. Does anyone from the UK run this software using boot camp and installing windows on a mac?
View 16 Replies View RelatedI've been reading up on ways to install Leopard from an external HDD image (.dmg), and I'm wondering if it is possible to do a similar function, but with Vista in boot camp. I'd like to backup both installers to an external HDD and make them mountable if the disks have a snafu.
Can you install Vista from an external HDD via Boot Camp? I imagine this would be an .iso or similar file type.
I created 4 profiles/users in OS X; when I installed Boot Camp, it was in my wife's profile (she will be the primary user). My son went into his profile last night to use Garageband and I noticed there was no Windows disk on his desktop, nor was the Fusion icon on his dock.
So, can you/should you install Boot Camp for more than 1 user in OS X?
I'm trying to install Windows XP on my macbook pro to play some games and use some cool applications that haven't been made for Mac OS X I have an activated copy of Windows XP with me... do you think it will work if I try to install it on my macbook pro...
View 6 Replies View RelatedI installed Windows 7 on a Mac Pro 09 and now I�m not sure if I really need the Boot Camp 3 drivers or not. It�s just installed for games and 3D Software. I don�t have an USB iSight, obviously, and don�t need the media function keys of the keyboard nor I use the Mighty Mouse. Also I don�t need iDisk access HFS+ access or Bonjour and what so ever. I mostly run OSX anyway.
So, would it work if I just install the Chipset drivers, Audio, Ethernet and graphics card drivers if I find them?
Or do the Boot Camp drivers have special stuff which I absolutely need?
Is there any way that I can install the boot camp HFS driver on my non-Mac PCs?
Anyone know what the driver's setup file might be called, since there seems to be several boot camp setup EXEs on the Snow Leopard disc?
I recently ordered a copy of Windows 7 Professional Full Retail (for around $30 before tax and shipping through a Microsoft phone order as a student ) and it should get here tomorrow. My Mac that I use is a mid-2009 13" 2.26GHz MacBook Pro that I upgraded to Snow Leopard. Now, my question is should I wait to install Windows 7 with Boot Camp? I heard that Apple currently doesn't officially support Windows 7 on Boot Camp, but will by the end of the year. If this is the case, is the "official" support involve a complete update of the Boot Camp program or just the drivers? The reason I am asking this, is the way I got about installing operating systems is by method of complete clean installs that way everything is functioning correctly and I can perform clean, initial backups to restore from. If the update is to the Boot Camp program as a whole, I don't want to go ahead and install Windows 7, as I can see myself just re-installing it when the "official support" comes out. So should I install it or wait based on the support from Apple?
View 14 Replies View Related