When I'm playing games, like Supreme Commander and Oblivion, sometimes the screen locks up and the sound starts skipping, like a scratched CD. Does anyone have a fix for this or have the same problems?
View 1 Replies
I've recently installed Windows XP SP3 in bootcamp on my iMac so i could play some windows games, and there's one problem: the sound is coming out of the built in speakers with a horrible noise in the back instead of from the speakers i have plugged in. The RealTek driver recognizes that the speakers are plugged in, but doesn't use them. Now I've tried to connect my ipod headphones, and they don't work either! What sould I do?
View 2 Replies View RelatedI have tried everything to get this motor running. I've spent so many hours on this, and now I've simply given up and hope that someone here can help me, before I go out and kill myself in pure frustration.
I don't have any sound at all after having installed Windows XP on my iMac 24. I have tried two different versions. One with SP3, and currently one with SP2. Since I read that a lot of people had trouble with the HD audio in SP3, and the fix didn't do anything for me, I figured I might as well try SP2.
Who cares, right. This doesn't work either though. I've downloaded the fix refered elsewhere on this site, and reinstalled the drivers. I have disabled, reenabled, uninstalled, reinstalled, updated and so forth so many times I've lost count. I think the Windows I'm running now is the fourth reinstall of windows, and I'm absolutely lost.
What's even worse is that I have an external sound card, a presonus firebox, which I have also tried to install several times. I reckonned that it might help to install an external sound card. But even this doesn't work. The light is blue, when I'm installing drivers, and updating firmware, but goes red after this. But whatever. If I can just get the standard output working.
Probably a very n00bish question, but would it matter, that I'm using a friends Leopard disc, which is used for a laptop? This, the fact that it's not my own disc, is really the only thing that haven't fit exactly into all the guides, and troubleshooting.
I literally registered to these forums 3 minutes ago, so if this has already been covered and solved than it would be great if someone could point me in the right direction.
When installing the necessary drivers from the Leopard install disc I get an error reading something to the tune of "another instance of this install is already in progress.
Please try again when it is finished." Now, that is not exact, but it's pretty close. I've learned that this message is tied to the audio drivers needed for Windows, and I've confirmed that by going into the control panel and seeing that the system does not register any sort of audio input or output.
I've tried a few google solutions for this problem, including: downloading some sort of Windows patch, downloading drivers from the Realteck(I think that was it) website and reinstalling the drivers from the DVD. None of those has fixed the problem, and I continue to get the same error but of course see no other "instance" running on my machine.
there i have a macbook pro and i have recently installed windows vista 32 on it using boot camp. also recently i have updated boot camp to 3.1 and my sound seems to have stopped working.
Although the red light in my headphone jack is gone my speaker icon on the right hand corner has a x on it and i cannot hear anyhting now. i have cheaked my sound driver and it is up to date cirrus logic cirrus logic cs4206a
Anyone have a fix? Sound is waaaay too low.
View 2 Replies View RelatedEverything seems to be working well except there is no sound from speakers on the Vista side. Still OK on Mac (of course).
I have iMac 3.06gHz
Checked that sound is not muted etc.
It does seem to have two volume controls (Vista) in the dock? One Realtek and one Mixer. Neither are muted. Device Manager says all is ok and running latest software.
One other small matter is that I can't seem to load a network adapter. It finds new hardware everytime I open but can't find any software and as I don't know what I'm looking for I am sort of stuck.
In my attempt to install Windows XP via Boot Camp, I accidentally inserted an SP1 disc instead of the SP2 disc that I have. The installation proceeded to the point where it does for most who attempt this: the screen where you are prompted to press ENTER. I could not proceed and therefore restarted the iMac and held down the mouse button upon start-up to remove the CD.
HERE IS THE PROBLEM:I can not boot into OS X because the keyboard shortcuts (those that might allow me to select which partition to boot from and/or reset PRAM) seem to be disabled. Instead, a reboot always ends at a black screen with a blinking DOS-esque cursor, or the prompt: "No bootable device -- insert boot disk and press any key."
I have attempted inserting my SP2 disc at this point, to no avail. My keyboard seems to be disabled, as if the SP1 install proceeded just enough to establish itself as the boot drive without drivers for the keyboard. I've tried using all 3 USB ports, disconnecting other USB devices. Oddly, my bluetooth mouse works to eject the CD on reboot...
I just purchased a new iMac (2.66 c2d & 4gb of ram), Parallels 4, and Windows XP. I would like to get great performance whenever I use Windows XP and would like to know which installation procedure would help accomplish that.
Would Parallels provide me with a better user experience by installing Windows directly via Parallels OR by having Parallels utilizing a Boot Camp Partition? Which is better and why? Also, how much memory should I allocate to Parallels/Windows XP?
Last night I installed VMWare Fusion and Windows 7 on my Unibody MBP running SL. When I use Fusion, my computer slows to a crawl. I spent a few hours getting Windows set up and installing software last night.
I would like to try using Boot Camp instead, but do not want to lose all of the software and files that I have installed. Is it possible to set up Boot Camp, and keep the same Windows setup?
hi! i'm planning to install windows 7 64-bit in my mbp, problem is i looked at the requirements needed and it stated that i needed boot camp update 3.1. i checked my boot camp version and it stated that i had 3.0.1, tried using software update, but states that i had no updates available. what should i do? and what else do i have to keep in mind while installing windows using boot camp. thanks in advance!
View 1 Replies View RelatedI use to be able to select the vista partition to restart into from the configuration pages in leopard on my macbook pro, but now my bootcamp partition is missing. I have to hold the option button to manually select the windows partition and then load into windows. Some setting somewhere must be lost. Does anyone know how to restore it?
View 2 Replies View RelatedThis is my first post here... even though, I've read a lot of the things on this forum, but never decided to post a question 'til now... now that i bought a macbook pro that is.
Actually I have some sort of annoyance with boot camp. It works as it's intended (with windows 7, which is a miracle, because everyone complains about that combination). But whenever I boot up and press "alt" to select the hard drive i want to boot, it always shows Windows. Can i change it for something else? and, how can I do it? Both of my partitions have names of their own... they're not generic... but still, they are not working, what can I do??
I'm trying to install Windows 7 and can't get the boot camp assistant to partition my drive. The drive in question is 500GB with over 200GB free space. I want a Windows partition of 35-40GB.On first attempt I kept getting the cannot move files error when trying to partition. I read up on the error online, and most people suggested issues with parallels or needing to use idefrag. I had parallels on my machine at one point, but am not sure if there are any problem folders still hiding somewhere. Any tips on that part?I ran idefrag overnight last night. When I booted the machine up this morning, I launched it again to verify that the disk was defraged. Boot camp still doesn't want to play.
View 8 Replies View RelatedWould have checked this myself but I haven't gotten around to installing Boot Camp 3.1 yet.
Anyone with a uMBP try to see if Boot Camp 3.1 allows the keyboard light to completely shut off in Windows 7?
I described it more here.
I have a Macbook Pro and I'm hoping to install Windows Vista via Boot Camp. Is it possible to do this with a Dell reinstallation DVD that came with my Dell laptop?
1 - I have an early 2008 iMac 24" and ordered Snow Leopard disc from Apple
2 - After installation of Win7 64 bit and problems with boot camp 3.1 drivers support then tells me my computer will not run windows 7 64 bit and sends me a list of non-compatibles. Sure enough mine is one.
3 - Several respondents help me and it appears that 64 bit will run but still trouble with keyboard/mouse.4 - uninstall 64 bit and install 32 bit and related boot camp drivers5 - numeric keypad on apple keyboard still does not work with office 20106 - just tried to update drivers for win 32 but it says more current ones are installed??? I guess that is from the attempt to install 3.1 for win 64 unsuccessfully?7 - Now support lists computers that will not run windows 7 and mine is not on that list.
right now i'd be a happy camper if someone could just tell me how to get the Apple keyboard that came with my iMac and the numeric keypad working when in Windows or Office.
I have an '08 Octo 2.8.
I created a Boot Camp Partition (an entire drive, actually) and installed XP. The install went off without a hitch ... Except, having rebooted to Mac OS X (10.6.1) there is no way to boot Windows again. Going to Preferences->Boot Disk shows no Book Camp bootable drive.
On Windows I noticed there was an icon in the bottom right (next to the clock) that I could right click and then restart in Mac OS X. Is there a similar thing for OS X that I can just click in the menu bar and restart in Windows?
View 20 Replies View RelatedSo i installed windows 7 on my macbook (not aluminum) and when i go to install the boot camp drivers off of the retail leopard CD i get an error that says that I can't because it only installs on vista or XP. My laptop came with Tiger CD's so i can't get them off of there.
View 1 Replies View RelatedI am trying to set up a Parallels 4 VM for a Windows 7 x64 Build 7000 boot camp partition, but parallels tools will not install. Half way through the process, a windows unsigned driver security box pops up, and when I tell it to install anyway, it still rolls back the installation process and I get the message "An error has occured while installing parallels tools, click OK to restart your computer and try again." or something to that effect. I have tried this about 15 times, and I have tried uninstalling/deleting the VM and re-creating the VM to no avail.
What I want to know: Is there a way to manually install Parallels Tools while running in the boot camp partition, just like installing any other application? I want to install it outside of Parallels, since for some reason it keeps screwing itself up when trying to set up the drivers as a VM.
I was able to get Windows Vista 64 running on my 17" MBP, it is pretty slick. I set aside 32 GB for Windows, ran the install, loaded all the appropriate Boot Camp drivers and everything is working perfectly in Windows. I boot back to OS X to attempt to configure Parallels...
So I fired up Parallels and follow the guided instructions. However, when I get to step 2 Im not sure what I should be doing. I already have Windows on its own partition, but Parallels is asking me for a CD/DVD image. Im a little leery of putting the Win disc back in, I dont want Parallels to always want to boot from the disc. how do I tell Parallels to load Windows as a Virtual Machine off of the Boot Camp partition?
The partition Boot Camp created now appears on my Desktop in OS X as Untitled, I can not, for the life of me, figure out how to change that. If I eject that volume will I still be able to Boot to Windows? Will Parallel still work?
So I finally got Windows 7 64bit installed on my MBP 2.33 machine.
However, from the guides, I should just insert my leopard disc and it should run. This is the thing, I don't know where my leopard disc is (i've been moving a lot lately due to being unemployed) and its either lost or packed away somewhere. I have a backup copy on my time machine drive and haven't tried that yet. I downloaded a 2.1 extraction and burned it to CD though. I inserted the CD and I can see in windows 7 three applications. One is Windows XP, the others are Windows Vista 32 and Windows Vista 64. I click the Vista 64, but nothing happens at all, and no drivers are isntalled.
im using boot camp for windows 7 and recently started to use vmware and ever since then the start up time is horribly long when before it was very fast. it takes a long time to get to the log in screen and then when i get to the desktop it stays black for a while longer. its not the worst thing in the world and a small price to pay to be able to run my boot camp partition alongside os x but i just want to make sure vmware is the culprit because if it isn't i might need to do some more digging to find the real problem.
btw im talking about starting windows through boot camp not through vmware.
I got the 64bit version of windows 7 from my the Microsoft Acedmic Alliance program. I downloaded it on my parents windows machine burned the .iso with nero and I went throught the boot camp assistant it asked me to put in the disk. the computer rebooted and then it was a black screen. The
The disk is a bootable disk because I used the same disk to install it on my parents windows laptop.
How do I get the disk to boot on my mac?
I've installed the drivers, and when I start up in Windows, neither the internet or the wireless pick up.
Using Windows Vista Home Premium. The little wireless icon in the tray just has the big X, so it's literally picking up nothing. I also can't connect via ethernet.
Is it possible to install Windows 7 on an internal disk via Boot Camp and then remove this disk and use it as an external drive? I have two drives for my mini, one in use and one in an external case; unfortunately, neither have room for everything plus Windows. If the answer to this question is no, then I'll buy a bigger drive. I'd just like to avoid this if possible (I already have a ton of external drives and not enough ports to plug them into).
View 4 Replies View RelatedI have a 15" MBP. Hardware in my sig.
I'm getting Win7 this week. I'm getting it free from school and unsure at this point whether it will be 32 or 64 bit. That said, here's what I want to do with my setup.
1: School. I have to use Office 2007 for my classes. Office 2008 for Mac is not supported, because some of the formulas that you create in 2008 won't convert correctly into 2007 format and I can't have that. I will also use IE due to the fact that neither Firefox nor Safari will play my Mediasite classes correctly in Silverlight. Only IE allows me to speed up the playback. I am going to use Parallels 5 for this.
2: I game, but not much. The one game I love and will definitely put on my Mac is Morrowind. I want to use Boot Camp for this reason.
Soooo, I have been told that if I'm going to install Windows under Boot Camp that I should do that install first. Then install Parallels. I'm really not sure how to do any of this. I understand that I will only need to install Windows a single time and that it should work under with Boot Camp or Parallels.
i have the Boot Camp install PDF from the Apple site, but I'd love some tips, tricks, help, advice, words of wisdom, etc., from this forum. Please tell me what you think about which to install first, what approach to take, how much HDD space I should partition when I install under Boot Camp, etc.
I used to be able to drag files over to my storage drive from Windows 7, but I'm unable to do it now, I have Boot Camp 3.1 installed and the latest update for it. If I right click in the storage drive and select New Folder it says Destination Access Denied, and has the buttons Continue / Skip / Cancel. When I click Continue, it shows the same dialog but it says You need permission to perform this action and the buttons Try Again or Cancel, I've repeatedly clicked Try Again and it does nothing.
View 7 Replies View RelatedIn retrospect, I should have ignored it when Apple Software Update told me about the Boot Camp 3.2 upgrade for my 2006 Mac Pro running x64 Win 7 ultimate. When I ran it, it overwrote my blue tooth driver and my keyboard stopped working. Thanks for the folks at Mac Rumors forums, I was able to go through the procedure to get it working again, and I also had to update the video driver (again) from ATI for my 3800.
So then I decide to reboot into MacOS and discover that my icon for selecting the boot disk was gone, not to mention any directory or programs in the start menu. This happen to anyone else? Do I have to downgrade to 3.1 or does anyone have a recommendation to get 3.2 working?
