Windows On Mac :: Vista Business 32 To Win 7 64?
Jun 27, 2010
I have a new MBP (sig) and went to my school bookstore to pick up Windows 7 for cheap since I'll need it when I start in the fall. They informed me that their Win 7 discs were upgrade discs and that I'd have to buy Vista first, and so I did. It is Vista Business and when I looked at my computer information found out that it is 32bit. I have both the 32 and 64 bit versions of 7 (giving the other to my brother) and when I popped in the Windows 7 64 bit it told me the installation disc wasn't compatible with my current version of Windows.
So is there a way around to this? Both me and my brother (who has a Toshiba, not a Mac, although I don't think it matters) now have 32 bit versions of Vista and I would like to have the 64 bit version. And ultimately the 32 bit version would work right? I'd hate to leave the 64 bit version gathering dust.
View 5 Replies
ADVERTISEMENT
May 17, 2009
I searched everywhere and didn't find an answer.
I currently have Vista Business installed in Bootcamp. Will I have problems if I try to install Windows 7 over the top of it, or should I delete Vista and the partition and start over clean?
View 2 Replies
View Related
May 9, 2009
I have an 8 Core Mac Pro running 10.5.6. I have four internal drives and I want to use one of those for windows vista business 64bit. I also have a esata card as well as an atto ul5d scsi card. I followed the bootcamp instructions, created one windows partition one of my empty drives, follow boot camp instructions and put in the windows vista business 64bit disc, then clicked "start installation". After the computer reboots, some type comes up says it's scanning the atto ul5d and can't find the bios driver, then the screen goes black for a few moments, then "not bootable device - insert boot disk and press any key". But I have the windows vista business 64bit disc in the dvd drive and pressing any of the keys do nothing, almost like it doesn't recognize the keyboard? I also tried to do a boot camp partition on one of the drives that has my apple OS, and till same result. Besides the 4 internal drives I also have a third part esata card as well as a sci card, and the dvd drive that is in hear is not the stock dvd drive.
View 1 Replies
View Related
Jun 9, 2009
Machine is a 15" MacBook Pro, Early 2008 (last of the non-glossy variety). Router is latest Dual Band Apple Airport Extreme. Device manager lists the driver version as 4.170.25.12 and Service description is BCM43XX. Driver comes from a fresh install of Boot Camp drivers. The wireless card works just fine - very well, actually - on the Mac side, but the moment I switch to Vista, I lose any ability to connect at N speeds and get a maximum connection of 36 mbps, and usually closer to 11 or 14. Do newer drivers exist? I've been googling for quite some time and I can't find anything that seems to work on the mac.
View 4 Replies
View Related
Aug 11, 2009
I have successfully striped two SSDs in Vista Business-64 on my MacPro1,1. I have used Vista's data carrier administration program for this. As expected the array isn't recognized in OS X. So I cannot just dump a Winclone image on the array. That would have been much to nice!
My next strategy was a total backup with Vista's own backup program on another HDD. That went without a hitch. I then hoped that booting the Vista install DVD with the backup drive present and the RAID0 array would allow me to restore the backup on the RAID array. Unfortunately Vista will not recognize the array running of the install DVD. Loading AHCI or IMSM drivers will not change this situation.
It appears that you have to make the dynamic data carrier active if you want to install Vista on it. Unfortunately the data carrier admin program will not let me do this. I would do it in DISKPART if I knew it was possible and how to do it.
So the question is does anybody know how to install Vista Business to a dynamic data carrier? If I cannot figure out this soft RAID0 I will ave to buy a RAID controller which I thought I might avoid at this point.
View 5 Replies
View Related
Feb 7, 2010
My job has a policy requiring all laptops (all mobile devices, actually) to be encrypted. This is full encryption, requiring a username and password before it can even begin to boot into Windows. It is a 3rd party product. My question is, is there anyway to run a bootcamp partition to support this kind of business encryption? How about OS X? What about inside of a VM?
View 1 Replies
View Related
Mar 31, 2012
I'm running the OSX 10.6.8 and want to connect to applications running on Windows Small Business Server 2008. Is this easy or difficult or impossible?
Info:
Mac Pro, Mac OS X (10.6.8)
View 4 Replies
View Related
Oct 28, 2009
Is it better for me to buy the upgrade for windows 7, from vista to windows 7 or to buy the full copy? If i buy the fully version, should i get rid of my pardon, and re-do it with bootcamp, or should i just do it over my current pardon? (Vista) I just want the best way, less pain, less anger. Im willing to pay more for full IF IT IS THE BEST way to do it.
View 1 Replies
View Related
Jun 9, 2009
I'm running Windows vista ultimate on my Imac and lately the mouse started acting weird on Vista, it's jumping around and moving unpredictable,and also i use windows in spaces, and i can't switch to spaces anymore until i click control + command, please let me know what the problem is, ohh i'm running a USB G9 Logitech mouse.
View 1 Replies
View Related
May 22, 2010
I have a Macbook Pro and I'm hoping to install Windows Vista via Boot Camp. Is it possible to do this with a Dell reinstallation DVD that came with my Dell laptop?
View 4 Replies
View Related
Mar 9, 2008
I installed Windows Vista, and Vista boots up fine. However, I hold down the command keys when starting my computer up again, and it won't let me select Mac OS X. It just starts Vista.
On "My Computer" in Vista I see "Bootcamp (C" and "Macintosh HD (E in my Hard Disks Drives. Also, whenever I start up Vista it tells me something about a wrongly formatted drive. My files are still all in the Mactintosh HD drive, but I don't know how to start up Mac OS X.
View 4 Replies
View Related
Aug 23, 2009
Does anyone know how can i install Vista home premium on my imac? ive been using boot camp to do all the steps but im stuck at where i should choose NTFS format partition had disk. Seems like mine is FAT32.
This is what ive done;
1.Open up bootcamp assistant
2.Partition, divide equally(116GB each)
3.Insert Vista disk and start installation
4.Install Vista and insert CD key
5.custom installation
6.Now this is where i stuck
I have 4 options, and i should choose the last one which says bootcamp 116gb, but i cant click it since it says the disk need to have NTFS format. How can i set so that i partiton it to NTFS?
View 9 Replies
View Related
Apr 10, 2009
I was able to get Windows Vista 64 running on my 17" MBP, it is pretty slick. I set aside 32 GB for Windows, ran the install, loaded all the appropriate Boot Camp drivers and everything is working perfectly in Windows. I boot back to OS X to attempt to configure Parallels...
So I fired up Parallels and follow the guided instructions. However, when I get to step 2 Im not sure what I should be doing. I already have Windows on its own partition, but Parallels is asking me for a CD/DVD image. Im a little leery of putting the Win disc back in, I dont want Parallels to always want to boot from the disc. how do I tell Parallels to load Windows as a Virtual Machine off of the Boot Camp partition?
The partition Boot Camp created now appears on my Desktop in OS X as Untitled, I can not, for the life of me, figure out how to change that. If I eject that volume will I still be able to Boot to Windows? Will Parallel still work?
View 5 Replies
View Related
Apr 22, 2009
I recently installed Windows vista using going through parallels because my bootcamp failed a while ago. This partition also acts as my bootcamp. Well The internet on parallels works fine because it is using osx network, but when i boot into bootcamp the network drivers seem to be missing. I cant figure it out, but it says the ethernet and network drivers are not there. I cant find the drivers on the internet anywhere and when i use the vista disk i have it still does not want to install them.
View 2 Replies
View Related
Aug 29, 2009
I just bought a new MacBook pro 1 week old. I partioned my hard drive and installed a clean copy of Windows Vista Ultimate on one side. I then downloaded skype, but my internal microphone will not work. I tried everything. Can someone help me out with this issue.
View 3 Replies
View Related
Sep 24, 2009
Last night I installed Windows Vista to run a game on here, but I got several issues. I already installed the drivers from the Snow Leopard DVD, but the problems still persist.
The issues are:
1. Sound is very very low and uneven. I have the volume all the way maxed, but the loudest it can go is less than half than the potential volume in Snow Leopard.
2. Headphones don't work. I've tried like 3 pairs of headphones and none of them work. When I plug them in, the sound still comes from the left speaker (I can barely hear the right speaker) on the laptop and not on the headphones. Also, the headphone jack is emitting a red light out of it.
3. The lights on the keyboard won't shut off. I used the F5 key to turn off the keyboard backlighting, and while it goes very dim they won't shut off.
I already tried the suggestions on this thread but none of those fixes work. I need help! Especially with the sound! Anything at all would be greatly appreciated.
I'm running a MacBook Pro 13" from June 2009, 2.26GHz Intel, 4GB of RAM, and an Nvidia GeForce 9400M. I instlled a 64bit version of Windows Vista (OEM).
View 1 Replies
View Related
Oct 9, 2009
I've installed the drivers, and when I start up in Windows, neither the internet or the wireless pick up.
Using Windows Vista Home Premium. The little wireless icon in the tray just has the big X, so it's literally picking up nothing. I also can't connect via ethernet.
View 6 Replies
View Related
May 1, 2010
im about to install windows on my macbook via bootcamp. However, i will use the same partition for parallels, which means that my ram is goign to be damaged. I wanted to know which os did u recomment me to install. Does windows 7 hog more cpu and ram than vista?
View 13 Replies
View Related
Apr 27, 2009
I'd appreciate it if anyone could offer me some advice on whether to go with the 32bit or 64bit version of Vista on a 4-core 'Nehalem' Mac Pro. I've read that some drivers will fail to work under this version of the operating system - is this the case for the hardware in the Mac Pro (particularly the HD 4870)?
View 6 Replies
View Related
Sep 25, 2009
I have the "collectors edition" macbook unibody....2.4ghz 4gb ram, 250gb hdd. On apples website it states that x64 is compatible with the new 13" pro but not mine...i didn't think there was any difference really besides firewire and a sd car reader....is it possible to install x64 vista via bootcamp or not??? I need to have vista on my laptop for "Examsof" for lawschool and parallels is not allowed.
View 12 Replies
View Related
Mar 12, 2009
i have my aluminum 2.4GHz 4gb RAM aluminum macbook with the geforce 9400m. and i was wondering. is DirectX 9 better then DirectX 10?. even if the difference is only 8 FPS it still counts.(really the only game im going to play is elder scrolls 4 oblivion)
View 17 Replies
View Related
May 2, 2008
Has the situation changed with the new IMacs? Are they able to run 64 bit vista like the mac pro and MBP, or are they like the past generation of IMacs?
View 6 Replies
View Related
Mar 11, 2009
I just bought a new 24" imac with 3.06GHz, 4GB memory, 1TB hard drive, and the ATI Radeon HD 4850 512MB graphics processor i am still waiting for it to arrive but am wondering which MS software i should go with xp or vista? i have been reading around to see what other ppl are saying about vista but most ppl are running it on the older imacs or pc's and im seeing that some ppl love it and others dont... so im wondering if there is anyone out there who is running vista on the new imacs and which software would be best for my mac? im using windows only for gaming.
Depending on when my imac arrives i might just skip out on buying xp or vista and wait for windows 7. but if it comes soon i dont want to have to wait forever to get windows 7 before i can start playing games.
View 24 Replies
View Related
Sep 19, 2009
I have this issue where whatever version of Windows I try to install when it gets past the initial software load up to the part where it asks what language you want it will just stop and stay there. With Vista it's after the scrolling progress bar, I get the curntains background and that's it. Nothing more. With Windows 7, same thing—after the swirly Windows logo appears and then it should ask what to do, it doesn't show that window. I've tried:
1) Ripping out all my drives, except the one I need.
2) Installing Snow Leopard client and trying BootCamp
3) Change video cards
4) Disconnect peripherals
5) Reset PRAM, SMC, etc.
The know the disks are good since I have tested them, I've tried almost a dozen different copies of Windows from XP to Vista to 7; all with the same result. I can't install at all. It's quite frustrating since Apple has no clue to what's going on, and I can't take this to the Apple Store seeing that I don't have a car.
View 4 Replies
View Related
Oct 13, 2010
i currently have it formatted in FAT should i delete the windows xp partition reinstall xp under the NTFS format and then upgrade to Vista?
View 3 Replies
View Related
Nov 6, 2010
I just bought a Macbook Air, my first Mac! After a couple days figuring out how to navigate I am starting to get the hang of it. I want to network with my old Laptop PC to be able to see some files that I plan on keeping there. My question is this: Is it easier to set up a home network with Vista or XP?
I have Vista on my PC right now(and I've tried a few online guides to view my files but I can't get it to work) but I also have a copy of XP. I was thinking of wiping my hard drive on the PC and installing XP instead.
View 1 Replies
View Related
Nov 13, 2010
I have a Mac Mini running OS X 10.6.5, and a Windows Vista SP2 laptop. I sync my iPhone to the Mini, so all my photos and videos are saved there. Now, I want to be able to access the Mini from Vista on the laptop. Windows Sharing is on, and in Vista I select Run-> "192.168.1.100" (the IP address of the Mini), and an explorer window pops up asking me for a password. I enter the password for the administrator account I use to log in on the Mini, "user1" and "blahblah", where "user1" is the user ID, not the name associated with the account, i.e. "John Doe".
View 2 Replies
View Related
Dec 18, 2010
I have been running Vista in Parallels 5 on my rev B 1.86 MBA SSD. Now I see version 6 is out and what is the opinion about the speed increase? Btw, I still run Leopard 10.5 on my MBA.
View 2 Replies
View Related
Apr 7, 2008
I know this question must have been answered before, but I'm a little lazy and don't want to search the forums tonight.
Anyway, I understand that Vista x64 is supported for current Mac Pros and MBPs, but is it also supported for the iMac? If its not, does anyone think that Apple will provide support in the next anticipated update?
View 8 Replies
View Related
Aug 10, 2008
I have an iMac which runs 10.5, and I was wondering, I love the look of vista, so is there a way to customize the looks of the computer to do this (Install a Vista theme, if you will)?
View 24 Replies
View Related
