Windows On Mac :: Unable To Detect Graphic Card Through Boot Camp?
Jan 13, 2010
Installed windows 7 today (geniune copy) to play the Star Trek Online open beta, managed to download and install it, but when I go to play it, it crashes. Went to performance information and tools and under graphics it says: Total Memory Not Detected and everything is 0MB apart from display adapter which says 6.1.7600.16385 and monitor resolution.
I have a 24" iMac 3.06Ghz with 8800 graphic card. Few weeks ago I had windows 7 installed for dragon age, ran like a charm, but I got rid of partition (dont ask why)
Has anyone cracked or had success in installing Windows on a SD card via bootcamp?My bootcamp wont see the SD Card. Just keeps coming up with UMBP HD only.
In my attempt to install Windows XP via Boot Camp, I accidentally inserted an SP1 disc instead of the SP2 disc that I have. The installation proceeded to the point where it does for most who attempt this: the screen where you are prompted to press ENTER. I could not proceed and therefore restarted the iMac and held down the mouse button upon start-up to remove the CD.
HERE IS THE PROBLEM:I can not boot into OS X because the keyboard shortcuts (those that might allow me to select which partition to boot from and/or reset PRAM) seem to be disabled. Instead, a reboot always ends at a black screen with a blinking DOS-esque cursor, or the prompt: "No bootable device -- insert boot disk and press any key."
I have attempted inserting my SP2 disc at this point, to no avail. My keyboard seems to be disabled, as if the SP1 install proceeded just enough to establish itself as the boot drive without drivers for the keyboard. I've tried using all 3 USB ports, disconnecting other USB devices. Oddly, my bluetooth mouse works to eject the CD on reboot...
I just updated boot camp and when restarting teh entire windows went 8 bit. In the monitor conrol panel the computer recognizes I have an nvidia 8600N video card but when changing the resolution it won't take it. I press apply and nothing, it goes back to 640 x 480 and 256 colors.
I started the computer switching to the previous working system and I get the same result.
hi! i'm planning to install windows 7 64-bit in my mbp, problem is i looked at the requirements needed and it stated that i needed boot camp update 3.1. i checked my boot camp version and it stated that i had 3.0.1, tried using software update, but states that i had no updates available. what should i do? and what else do i have to keep in mind while installing windows using boot camp. thanks in advance!
I just got my Mac Pro in the mail today. I put two new disks into it, a 80 gb music drive and a 320 gb disk to use for windows.
Whenever I put in my windows disk and it asks me to choose which disk to install windows on and I recieve errors. Please excuse me I am very ill and have an awful headache and have been trying to get this worked out for a few hours now.
The first error I received was this: "Windows is unable to find a system volume that meets its criteria for installation."
There is a workaround page here but it hasnt helped me at all.
I'm trying to install vista on my second disk, a seagate 300gb. The music drive is formatted to fat 32. I've even tried removing my os x and music drive and just boot off the windows dvd.. nothing. Any clue as to why it wouldnt work right? I have read other threads about this but they havent been resolved... it so bogus!
So i installed windows 7 on my macbook (not aluminum) and when i go to install the boot camp drivers off of the retail leopard CD i get an error that says that I can't because it only installs on vista or XP. My laptop came with Tiger CD's so i can't get them off of there.
I've been trying to run boot camp on my black Macbok and have been halted with a Boot camp error message: "The disk cannot be partitioned because some files cannot be moved." It then tells me to back up my disk and boot up from my Leopard DVD, and restore to a "journaled" volume. Now, I've checked, and my HDD is already journaled. I've run "verify disk" and everything seems to be working okay. I've read that sometimes having things related to Parallels on the computer can create this error, and so I've deleted all things Parallells and am still getting the same error. I do, however, have Fusion (though I've deleted that Windows partition.)
I'm hesitant to follow the directions further, for I have nothing to back my disk up to and my Leopard DVD has gone MIA.
I installed Windows 7, 64 bit to another partition. I let it do its update thing. When moving on to installing Boot Camp from the Mac OS DVD however things failed. I heard that if things does not work out as promised I would have to download the Boot Camp 2.1 64 bit version for windows vista from the apple website, so I did. This didn't change anything however. The OS as a whole works well as of now but there's no support for any of the hardware such as hotkeys, camera and multitouch. I've also noticed that the sound drivers don't work properly and I'm stuck with a red light in the earphone jack, together with no sound. This goes even AFTER installing the latest drives from Realtek's website. Lastly, it also seems that my graphics drivers are not working that well. The other day I was trying to play Plants VS Zombies but the whole game was very pixlated, nothing like it should be. The game itself does not have any settings for changing this.
So in short this is what does not seem to be working: - No support for the hardware such as isight camera, hotkeys, multitouch etc. - No sound. - Graphics not as good as they should be.
when I went to restart the computer so those updates would take effect, during the start up process, all I continually see is the Windows XP scrolling status bar, I shrugged figuring it had a bit to do and left it to its own devices, and a half hour later returned to see the same scrolling progress screen. (before choosing which account to log into for windows).
I own every piece of software and hardware from Apple there is and I cannot understand that it seems that everything is about the iPad and iPhone right now. I have been having these issues since I got my 27" iMac. I can install Windows 7 just fine on my MacBook Pro and my previous 24" iMac.
Ever since I got the 27" iMac I get a black screen when installing Windows. I have found some posts that have a way around it, which seemed to have worked but now I am getting the blue screen of death. Doesn't matter if Windows 7 is supported by Apple or not but Boot Camp is and it should be corrected.
There is no excuse that after 6 months this issue has still to be addressed, all Apple talks about now is iPad and iPhone, I am sick of it. BTW I own an iPad and I don't see the big fuss about it, I bought it mainly to read books and watch Netflix on the go.
I've got a 2010 i7 15.4 MBP, after installing boot camp drivers from MAC OS DVD, I could not find any option about how long to dim screen brightness. However, my friend's 13.3 MBP does have. What about yours, guys?
I'm a total Windows newbie and I'm having trouble moving programs that I've installed onto Parallels 4.0 into my boot camp partition. Is this even possible?
If so what is the best way to go about quickly accessing programs from the Parallels virtual machine?
In retrospect, I should have ignored it when Apple Software Update told me about the Boot Camp 3.2 upgrade for my 2006 Mac Pro running x64 Win 7 ultimate. When I ran it, it overwrote my blue tooth driver and my keyboard stopped working. Thanks for the folks at Mac Rumors forums, I was able to go through the procedure to get it working again, and I also had to update the video driver (again) from ATI for my 3800.
So then I decide to reboot into MacOS and discover that my icon for selecting the boot disk was gone, not to mention any directory or programs in the start menu. This happen to anyone else? Do I have to downgrade to 3.1 or does anyone have a recommendation to get 3.2 working?
I just got a new mac pro dual quad core to replace my single dual core for work. Im trying to pull my Nividi Quadro 4500 out of my old machine that i had installed by apple in to my new machine. i get it all hoked in right but when i turn on my new machine it dosnt detect the display. Any suggestions?
I've got a 2008 Mac Pro with 4 internal hard drives that are in a 0+1 software raid. Unfortunately, this prevents me from using Boot camp on any of these drives.
I'm curious, is there a PCIe card that adds eSata ports that would allow me to put Windows XP on an external enclosure that is bootable?
I've been scouring the message boards and forums and have found cards by CalDigit, FirmTek and Sonnet, but I have no idea if any of these will support with Boot Camp/Windows.
I'm not interested in using the on mobo SATA ports because A) they aren't recognized in Windows, and B) I don't want to put a drive up in the CD drive bays (because of the bad airflow).
Can you just install a vanilla PC raid card into a MP, stripe a few empty drives in a RAID 0 config, and make OS X ignore both the RAID card and the NTFS striped drives when switching to and from Leopard?
I created a Boot Camp Partition (an entire drive, actually) and installed XP. The install went off without a hitch ... Except, having rebooted to Mac OS X (10.6.1) there is no way to boot Windows again. Going to Preferences->Boot Disk shows no Book Camp bootable drive.
This is the 1st time i got a Mac , i bought a black Macbook 2.4GHz some days ago .
I installed Windows Vista Ultimate using Boot Camp , and all went smoothly .
Only 1 prob is when restarting , i have to wait too long for the Windows to log on , i think about 1min with the black screen.
And if i want to boot in Mac OS , i have to push down the D button or the Alt, it takes quite a long time too .
So do you guys have any solution to this problem ? I want to get rid of the waiting time, way too much.
And do you know how to make my Macbook jump right in the choosing section when it starts ? ( so that i dont have to push down any button when it starts )
I have been trying to install Windows 7 (yes, legit copy) to my Macbook Pro the whole day, but I keep on getting this error message saying "Press any key to boot from cd or dvd . . . ."
When I press any key on the keyboard, nothing happens. I know this copy works because I've tried this on VMWare 3. (I'm going to Boot Camp of BIOSHOCK!)
What I've Tried:
Deleted partition, recreate partition and choose the Windows 7 disk as startup disk.
Well I installed Vista Ultimate using boot camp on my 27 inch iMac using 10.6.2 and now I can't get it to boot in OSX. I tried holding the command key when rebooting but it just goes into the windows part. Looks like windows took over. Does anybody know how I can get it to boot in Leopard?
Have the new 15" MBP with i7 Processor. I had another MBP with a 7200RPM drive and installed drive in the new i7 Mac. Computer was working fine until I installed Windows via Boot Camp. I can't boot to the Mac Partition any more, the partition is there but when you try to boot to it you just see the Apple logo and NO circle. I cannot boot to the install CDs or a bootable external drive. I target disk mode the computer and used another computer to boot using the drive in the i7 unit and it's fine and I can see all the information. I tried booting the i7 into single user mode and saw the following message:
Being a history enthusiast of that era, I've been waiting for Empire: Total War to come out for quite a while. I'm also a bit of an enthusiast as well and would really like to get a new iMac. I'm just wondering if anyone out there is playing E:TW on an iMac with Boot Camp and how well it's been working. Any particular video card recommended over the others?
Yesterday my screen (30" Apple Cinema) started showing symptoms of graphics card failure, jagged lines across the screen. I rebooted my Mac Pro and it was gone. Then it happened again an hour later, this time the machine didn't boot, I get the Apple logo, and then it hangs up and the screen is shifted to left (I get apple logo on left side of the monitor instead of the middle) and jagged lines all over.
So the first thing I tested was using Target Disk Mode, it works. I can access my Mac Pro's internal HD's by TDM from my MacBook Pro. Then I tested single user mode, it does boot, I can't read what's written since the screen is shifted to left, but if I type (without seeing) reboot and hit enter, it reboots. So I assume the single user mode is working.
What else can I try to 100% make sure it's my graphics card that failed and everything else is ok with Mac Pro? I already ordered a graphics card replacement but I wouldn't like to be surprised if the Mac Pro still doesn't boot when the card arrives. It won't boot from Apple Startup DVD either. Same thing happens, gray logo then kernel panic with jagged lines all across the shifted screen.
I just installed Windows XP to a Boot Camp Partition on my MBP. However, rebooting is a hassle and naturally I want to avoid doing such as often as possible. I think running Parallels Desktop would suit my needs quite well. But here's the catch: I want to be able to use one partition to serve both of those needs. In other words I want have the option of booting through both Boot Camp or Parallels.
How would I go about doing this? I already have a XP installed via Boot Camp. So if there is a method where I don't have to reinstall, great, but I am fine with deleting stuff.
I just purchased a new iMac (2.66 c2d & 4gb of ram), Parallels 4, and Windows XP. I would like to get great performance whenever I use Windows XP and would like to know which installation procedure would help accomplish that.
Would Parallels provide me with a better user experience by installing Windows directly via Parallels OR by having Parallels utilizing a Boot Camp Partition? Which is better and why? Also, how much memory should I allocate to Parallels/Windows XP?
