Windows On Mac :: Installation - Different Hard Drives?
May 25, 2010
Currently we have a mac pro with 3 1tb hard drives in raid configuration. I would like to installed windows on the 3rd hard drive. Installing via bootcamp doesnt work as it will only install on the same hard drive as macos. I tried to install windows by booting the cd but it doesnt see any of the hard drives. Is this due to the raid configuration? If so, how would i go about it I even formatted a partition on the 3rd hard drive in fat so windows would see it but no luck.
View 5 Replies
ADVERTISEMENT
Sep 19, 2010
I am trying to follow the following guide to do a triple boot, but I am stuck in Windows 7 installation
triple boot snow leopard, windows 7, & ubuntu
I have done the following:
1. Did a clean installation of OS X Snow Leopard on hard drive (Not yet partitioned the hard drive)
2. Installed rEFIt
I am not sure what the poster means by making sure it works by pressing the option button. I am assuming it means that I will be able to see the options I can choose when I press option? (I do see options to pick either "Hard Drive" or whatever disc in the DVD)
3. Partitioned 30 GB (or was it 40 GB? x.x I forgot sorry) space in Boot Camp Assistant for Windows installation. Chose the option to install Windows later.
4. Inserted OS X Snow Leopard installation disc and boot from there.
5. Opened up the Disk Utility and partitioned a hard drive (called Hard Drive_2) via the Partition section as instructed by the guide. Formatted in MAc OS Extended (Journaled)
So now, in that area I see "Hard Drive", "Hard Drive_2" and "BOOT CAMP" (so I am assuming that is what the poster meant by "3 partitions".
6. Restarted the computer with Windows installation disc.
Problems occur right here:
Problem 1: I do not see anything called "C something" as the poster said. But I do see something called "Boot Camp"
Problem 2: All the partitions that are available says that "Windows 7 can't be installed". So my question is am I supposed to "delete" a specific partition to install it?
I have pictures of the screen which I will upload later if this isn't clear enough.
View 4 Replies
View Related
Sep 13, 2009
I'm looking at the specs page for the MacBook Pro and it reads this...
Your MacBook Pro comes standard with a 5400-rpm Serial ATA hard drive. Choose a hard drive with a faster speed for greater performance. Or you can choose a solid-state drive that offers enhanced durability.
Basically suggesting that the HDD option has a performance advantage over the SSD, but is this the case? I always thought SSDs could read & write quicker because they use solid-state flash memory as opposed to hard disks.
I want to go with the 256GB SSD but I want to know how it ranks in speed.
View 11 Replies
View Related
Jan 25, 2009
I have a Imac 20 with a small 3.5 hard drive and I have bought a bigger 360 gig 3.5 hard drive to replace the old one. I have the new one in an external case with USB 2.0 right now. Is there some way I can transfer the entire contents of the old hard drive on to the new one and then swap out the old drive with the new drive and not miss a beat?
View 6 Replies
View Related
Sep 5, 2010
I have to hard drives in my powermac. And I am running out of space with the one that has the OS on it.
I want to make the 2 internal hard drives i have appear as one so i can still install and use things that say "must have mac OS installed on this drive to use" or whatever.
i've heard of people using RAID to join them, but i want details on how i could do this.
View 1 Replies
View Related
Jul 1, 2010
I seem to be rather confused after reading so many websites which say its possible to install windows 7 upgrade over xp by custom install in bootcamp.
I purchased a windows 7 upgrade which I have downloaded as a ".img" file.
However, bootcamp doesnt recognize my .img disc.
I have tried converting the .img to a .iso, and then burning the .iso as a iso disc, but still no luck. (Im not sure if its because of Active iso software Im using to burn the discs or if im doing something wrong.)
I have a legit version of XP already running via bootcamp.
View 13 Replies
View Related
Feb 7, 2009
so i have a windows XP professional disk, SP2 and all. i am trying to install windows, i get as far as partitioning the disk, but once it says "please insert XP disk" i do that, and it will think for a few minutes, and make a loud noise [coming from the mac] then a message pops up and says 'please insert installation disk.' the disk is brand new, what am i doing wrong? should i be partitioning the windows side larger?
View 2 Replies
View Related
Mar 12, 2010
I used to be able to drag files over to my storage drive from Windows 7, but I'm unable to do it now, I have Boot Camp 3.1 installed and the latest update for it. If I right click in the storage drive and select New Folder it says Destination Access Denied, and has the buttons Continue / Skip / Cancel. When I click Continue, it shows the same dialog but it says You need permission to perform this action and the buttons Try Again or Cancel, I've repeatedly clicked Try Again and it does nothing.
View 7 Replies
View Related
Nov 3, 2009
I've succesfully installed Windows 7 on my Macbook Pro mid-2009 with OS X 10.5.8 via Bootcamp 2.0. However, I have a problem:
When I insert my OS X Leopard install DVD into Windows 7 to install the Bootcamp drivers, the setup.exe only displays two options and both are apperantly related to the Macbook Air:
One of the options is to install OS X from an external source related to the Macbook Air and the other options is sharing of CD/DVD-drive for the Macbook Air.
I can't seem to locate the Bootcamp drivers. I've tried both my OS X Leopard and Snow Leopard installation DVD's but with the same result.
I've been thinking that the drivers could be located in a folder on the OS X installation DVD, but since I can't right-click in Windows the folder is hard to reach.
Have any of you guys experienced this?
View 3 Replies
View Related
Aug 27, 2009
So has anyone tried the new Bootcamp 3.0 drives off the Leopard disk with Windows yet? Do they support Windows 7 now? Any improvements to battery life, heat, etc?
View 9 Replies
View Related
Apr 25, 2010
I have a question about installing an OS to try on a USB hard disk. If I place the ISO on this drive and boot to it, and continue on with the install process, where will it install to? This is important because I do not want to lose all of my Mac files.
View 6 Replies
View Related
Oct 27, 2010
Four days ago my Macbook pro stopped working while I was doing internet. I had to shut it down but it never booted up again. I tried multiple times to format it with disk utility but it never worked utile at my 25th attempt, disk utility finally detected it so I formatted it but when I tried to install OS X, the disk couldn't be detected just as before. I thought that my HD was dead so i bought a new western digital scorpio blue 320 GB 5400 rpm. Now, it's the same story as before, my new hard drive is never recognize by the installation cd.
More infos:
- The drive is turning (it has power)
- With my first HD, i couldn't open the OSX partition but I could open the Windows partition.
- With my new HD in, the installation cd of OS X and windows cant detect the hard drive.
View 5 Replies
View Related
Mar 15, 2009
Hey guys, sorry this may seem like a basic question but here goes. There are many, many pages, websites and videos on how to install a hard drive into the MP, no problems there what my question is, is what's next?
The HDD is arriving Tuesday, once I have installed what will I have to do to it to make it a part of my current HDD. I assume Im looking at a RAID 0 using disk utility?
Before I do that will I have to install 10.5 on the HDD or just use disk utility to format it?
View 6 Replies
View Related
Mar 22, 2009
Just want to find out has anyone experimented installing 2 hard disks in your macpro and the 2nd hard disk is installed with xp pro via bootcamp?
Have you experienced any problems?
Would this be a better solution as compare to installing xp pro in virtual software?
View 2 Replies
View Related
Nov 14, 2010
I'm trying to install W7 on my Mac, everything goes fine until I get to the actual windows set up, and it says "that's everything we need for now" then your pc will restart a few times. Which it does, but then just goes to a black screen, the Mac sounds like it's gone to sleep. I left it for about 30 minutes with no change so powered it down..tried it all again from scratch and still the same result. On the Mac partition I can see that the windows partition has been created, but is called "untitled"
View 3 Replies
View Related
Jun 9, 2010
So I just finished installing Windows 7 on my MPB and I need to install Mac drives but I realize my Mac OS X Disc is in my college storage (Illinois) I'm in NY. Is it possible to download files from a torrent (putting it on a DVD etc..) or should I just call apple to get new one?
View 6 Replies
View Related
Sep 22, 2010
I'm hoping someone more knowledgeable than myself can help me out. I have a 2006 Intel-based Mac Pro:
Processor: Two 2.66GHz Dual-Core Intel Xeon processors
Ram: 6GB (two 512MB) of 667MHz DDR2 ECC fully buffered DIMM
HDD Bay 1: 250GB Serial ATA 3Gb/s; 7200 rpm; 8MB cache
OSX: Tiger
I need to upgrade to Snow Leopard to be able to use newer Leopard & above only versions of software ie FCP, Aperature, etc.
The issue is that I would like to keep the Tiger OSX as I run Pro Tools LE 7 on it. Upgrading to Snow Leopard would render Pro Tools LE 7 incompatible and I would have to buy it again.
So here's what I'm thinking. I would like to install a secondary HDD in Bay 2 and install Snow Leopard on it.
Is it possible to have OSX Tiger on the HDD in Bay 1 and have OSX Snow Leopard on the HDD Bay 2? Could they each be a different startup to be selected via System Preferences or at bootup? I would only want to run one OS at any given time.
If so what would be a workflow for installing the 2nd HDD and setting it up with OSX Snow Leopard.
Also, compatible hard drives for the 2006 Intel Mac Pros seem to be harder to find now. I called Apple and they no longer sell any compatible internal HDDs.
View 10 Replies
View Related
Feb 13, 2009
I'm planning on getting a Mac Pro with multiple hard drives and was thinking about having a main drive for Leopard and documents, one for music, one for video and another for Windows. I was just curious to see how others have theirs set up and any if there is advice to be shared.
View 24 Replies
View Related
Jul 19, 2010
On my iMac I have been trying to install bootcamp so I can get some of my favorite games.
I have partitioned the hard drive, I put in the windows xp disc to install, but when it restarts to install windows, it cannot get past the grey screen.
I'm not sure what the problem is, and I have followed the bootcamp assistant in doing everything it asks.
After trying to install windows, the only way I can even get it to reboot using mac is to do command-p-r. Anyone have any idea as to what the problem could be?
View 3 Replies
View Related
Nov 21, 2007
i tried the online support procedure and all i get is a message to fill in my serial number followed by "your model is no longer under waranty. contact a dealer..." although the link that brought me to that page is supposed to be for do-it-yourself-instructions. thx for a lead. my G5 is sitting in pieces til then.
Information:
Dual Core G5, 4GB, 20" Cinema Display, NV7800GT, 4GBRAM
Mac OS X (10.4.10)
View 3 Replies
View Related
Oct 13, 2010
Harddrive blew on my macbook and its out of warranty. Can I just buy a harddrive and install it and put in the Mac OSX installation CD and it will be ok. Or is there something fancy formatting i would have to do before installing.
View 3 Replies
View Related
Aug 28, 2009
I just bought this and i have 24 MB left on my macbook, is there an option in the installer to format the hard drive?
View 5 Replies
View Related
Nov 15, 2009
Macbook harddrive crashed (flashing question mark folder etc.). Bought new harddrive (2.5 in SATA), and reinstalled. Don't have original installation DVD so used legally acquired Mac OSX. Now instead of folder, the Apple logo appears with spinning gears but otherwise unresponsive. Can't install or eject DVD.
View 2 Replies
View Related
Feb 11, 2010
I've been looking into this a lot the passed few days, but there are a few answers I just can't find.
First of all, I know how to physically take apart my mac and put the new hard drive in. I have the new hard drive, and the tools I need.
The method I chose (before I looked into how to xfer data using macs) was to use time machine to make a backup of my entire hard drive on an external, which I did successfully.
However, before I take apart my mac and instal the new hard drive, there are a few things I want to be clear on, and I can't find the answers to.
Will I need the leopard OS disc for the new hard drive? Or does time capsule back up the OS as well, and give me some sort of prompt (doubtful)?
I have the pre late 2008 macbook pro, and it came with leopard. I haven't upgraded for several reasons I won't get into. My question now is, should I have the leopard OS disc? SHouldn't something like that have come with my mac? I ask because I feel like I should have one, but I don't remember getting one and can't find it anywhere. I always keep things like that.
And lastly, if I don't have the leopard OS disc, what do you think is the cheapest way for me to back up and xfer my data?
I have external hard drives, my new hard drive, and my old hard drive. Would it be cheaper for me to buy one of those things that directly xfers the data from one internal drive to another, or to buy another leopard disc? Is there a way I can just order the leopard disc I should have already for cheaper?
View 2 Replies
View Related
May 7, 2012
I asked about running Snow Leopard on my mac after a hard drive fail. I'm having issues with formatting a new hard drive in my mac. I have a 2007 black macbook and I'm trying to run a 160gb SATA seagate hard drive. After replacing this hard drive, I booted my mac up from cd, ran through setup fine until I got to the 'select a drive to install to' - the point where my hard drive should be visible. Nothing there at all. Nothing to click on in the box. My question is, is there a process I need to undertake to format the hard drive or is this an indicator of a much bigger problem?
Info:
MacBook, Mac OS X (10.4.11)
View 3 Replies
View Related
Nov 25, 2010
Got imac G5 just want to know two things .
1 - how many hard drives can you fit into a imac g5 or one of the new imacs.
2- if i want to put a bigger hard drive in can i just put a normal sata one in that you would buy for a pc
View 2 Replies
View Related
Jun 1, 2008
I would have thought, given the pace of innovation, that we might have had hard drives larger than 1 TB by now. Has anyone heard of any potential rumors?
View 24 Replies
View Related
Jan 17, 2009
Can the Mac Pro take any type of SATA HD or is it restricted to "special" types?
View 2 Replies
View Related
Feb 22, 2009
Looking at Seagate site, even newegg, the hard drives for mac are incredibly more expensive. I doubt the interface is different, so the only other option is how it is formatted.
If the drive is formatted differently, at an extra cost, I am curious if OSX is capable of formatting externals on its own? Can I buy a standard drive and format it natively in OSX?
I only ask, because after coming from Home Premium, several hardware utilities are non-existent.
View 3 Replies
View Related
May 27, 2009
I have a 320GB hdd, and a 1 TB hdd, what's the "biggest" single hdd you can get? is it 2TB? (internal hdd)
My other question is, can I swap content from the 320 to the 1TB, so the 1TB is the primary hdd?
View 24 Replies
View Related
