Just want to find out has anyone experimented installing 2 hard disks in your macpro and the 2nd hard disk is installed with xp pro via bootcamp?
Have you experienced any problems?
Would this be a better solution as compare to installing xp pro in virtual software?
I know it has been discussed previously in terms of desire to see it happen. But my question is how hard would it be for Apple to accomplish this?
The optical drive takes up a lot of space, and also connects through Sata, right?
OptiBay and others have hack solutions, do surely Apple could make an elegant one for us.
The mini has dual disks. The iMac also has dual disks.
Any reasons as to why we're still waiting to see this in a MBP?
I have a Macbook Pro Intel Core Duo (first generation of MacBook Pro released). I run OSX 10.6.5. My disk utility has detected a problem and says I need the install disks that came with the computer. Called apple and they said I could reboot from snow leopard or the upgrade.** Problem is that I don't have any disks with me except those that came with my brand new iMac. Can I use those to reinstall the system? Is there any other way?
**They also said that after 2007, the install disks that come with computers are keyed to that specific computer so I "might" not be able to use the disk to repair.
Additionally, and I don't know if this makes a difference but I have the airport/time capsule which backs up my computer for easy restore.
I recently bought an iMac and I was wondering why installation disks are not supplied. If a re-install is necessary, how can it be achieved without the original installation disks? or is there a new way of achieving this.
Info:
iMac (27-inch Mid 2011), Mac OS X (10.7.3)
I recently acquired a G4 cube with no os. It came with the original disks, but the only problem is instead of booting from them a flashing question mark on a floppy drive is shown. I have tried resetting the PRAM and NVRAM which hasn't worked.
View 9 Replies View RelatedI have the latest version of snow leopard and haven't used my laptop in awhile because I needed to get repairs done on it. Finally repaired it at the apple store, took it home, ran the updates, but disk utility is saying my drive is corrupted and to repair it with the installation disk. I have been looking everywhere and only found the TechTool deluxe CD but can't find my actual installation disks. how I would go about repairing my disk ?
Info:
MacBook
Pro, Mac OS X (10.6.8)
I must have deleted textedit - can't seem to find it. and I have no clue where my original disc that came with my iMac is. I am running 10.5.8 btw.
View 5 Replies View RelatedI have a G5 Power PC with Dual Ghz 2.5 processors. I have two 250 GB hard drives, my primary drive has 45 GB available and my secondary (storage drive) has 10 GB left.
My problem is that I have 6.5 GB of installed and recognized RAM, and yet I constantly hear my hard drive spinning up, as though the OS is using virtual RAM off of my hard drive(s), and ignoring my plentiful system RAM.
This happens when launching every application - big or small - and even surfing the internet. I open Activity Monitor and see that my Virtual memory is 7.2 when idle and grows to 8.5 with a couple of programs open. My page in/out is 48919/0.
This "spin up" sound happens all of the time, whether I am working on something or not, but particularly when I launch programs. No background programs (such as a virus scanner) are installed or running.
So my question is this: Is there any way that I can adjust OS X (latest version) so that it strictly reads my system RAM first before going to my drive? Some setting somewhere? I thought that OS X (as in all computers) only went to the hard drive's VM when it ran out of System RAM. Am I missing something?
Information:
Dual 2.5 GHz PowerPC G5 and iMac G4 800MHz w/ 1 GB RAM
Mac OS X (10.4.10)
G5 Dual 2.5 Ghz 6.5 GB DDR SDRAM, 2 - 250 GB HDs Logic studio 8 and Adobe CS3 Suite,.
I've connected my new Iomega Minimax with a firewire cable directly to my iMAc but nothing appears on my desktop.
Info:
iMac
I just got an AirPort Extreme Card from Apple that has been refurbished. I installed it in my G5 and then on power-on, the system hangs before the chime even sounds? I remove it and everything is back to normal...
Information:
Power Mac G5 Dual 2GHz
Mac OS X (10.5.1)
MacBook 2.16, PowerMac G3 B&W, PowerMac 8100 AV, PowerBook 540c, Mac Plus
I am wanting to replace the hard drive in my macbook but I don't have the os disks that came with the computer (I've recently moved and they're beyond lost). I've read where apple can send me replacements (I assume I'd have to pay for them). Can I get the leopard upgrade and use that, or it just that, an upgrade and I need osx already on the computer. I don't care about backing up anything, as theres nothing on it of any importance, all my music and photos are on an external hard drive.
View 3 Replies View RelatedMBP Mid 2009
Lion
8GB Ram
1TB HDDÂ
The problem started with my MBP freezing about once per day (sometimes spinning wheel, sometimes complete unresponsiveness). After doing a hard reset, I would usually be given the grey screen with stop sign, and the machine wouldn't boot. Resetting the PRAM would fix this, and it would boot OK. This was going on for a few weeks (I did disk checks which came back fine).
Then a couple of days ago the machine froze (unresponsive), I did a hard reset but just got the chime and grey screen - no Apple logo, no spinning wheel, no stop sign. Nothing. I did PRAM and SMC resets, but still nothing. I tried booting safe, safe verbose, hardware test, single user - nothing would work; just chime and blank grey screen. So I thought my OS installation had died.But when I tried to boot to the Lion DVD, still nothing - grey screen, the DVD would spin up, then spin down to a stop. I thought it might me faulty RAM, but not having any others to try I just swapped the two pieces over. Nothing.
Then I plugged my external 500GB HDD in to the USB (which was the machine's original internal HDD) and suddenly the Lion DVD would boot. So, the internal 1TB was dead. I put the 500GB back inside, booted Lion DVD successfully, formatted the HDD and started the Lion install. This failed with an error message 'the support files can't be copied - restart to try again'. So I restarted and in disk utility it said the HDD S.M.A.R.T was failing and it had a serious fault which could not be fixed and needs to be replaced. The 500GB disk was working fine and had had very little use since being replaced by the 1TB in January this year (the 1TB was brand new in January). So it seems odd that the both decided to fail one day after each other.
Info:MacBookPro
I have a mid-2010 macbook pro 13". The other day, it crashed on wake-up, and would not boot. I had a OCZ Vertex SSD boot drive, and the OEM hard drive in an optibay enclosure (replaces the optical drive and used only for data). I used this setup for one year with no problems. After much troubleshooting, I found that I could see the SSD drive by booting into a recovery partition that I have on a USB stick, and putting the SSD in a USB enclosure. Then disk utility could see it, but not mount it. The label on the boot partition was "lion", but it changed to "disk1s2". I was able to repair the drive using disk utility, and then boot from it using the USB enclosure.Once booted, I could still see the OEM hard drive with no problems. So I powered down and put the SSD back inside the case and rebooted. It booted in safe mode, but it booted fine. The next time I rebooted, it would not boot. I swapped the OEM drive and the SSD drive, and then the sytem booted with no problems and I was able to use both drives.
One day later, I noticed my OEM drive was no longer mounted in OSX. I took it out, put it in a USB enclosure, and OSX could see it fine. There were no errors on the disk. I put it back in the macbook and reboot but OSX couldn't see it.So, the primary SATA port seems to be working intermittently. Three times now, a drive has stopped working on this port. Each time, I could use the drive in an external enclosure (or using the other SATA port normally used for the optical drive. Does anyone have any ideas? Could it just be the cable?I'm trying to make this computer last at least another month or so because I need to upgrade to a larger model, and am holding out for the 2012 release.
Info:
Macbook Pro 13", Mac OS X (10.6.5)
I cannot open HDs in my Mac as they have this bloody Lock Icon on it. I tried all sorts of gimmicks aka change privileges , reinstall OS to no solution. PGP WAS installed..
OS 10.6.3
What's the best way of backing up a time machine backup external hard disk? Are there any disk checking tools for the mac, I could use to keep track of the health of the drive?
I can not afford too loose data, but I don't wish to break the bank either.
Wondering if anyone knows what the security policy and process is that is followed by Apple when a damaged hard disk is replaced by Apple. Is the disk destroyed, or demagnetized. How do we know that the data on the disk is will not be accessed and copied anywhere? Is there a stated policy document available somewhere in the Apple Store that discusses this?
View 3 Replies View RelatedIs there a program that will catalog the two and show me the differences? I seem to remember such a program in the old classic days.
View 14 Replies View RelatedI'm trying to setup a macmini server with four different firewire drives (has this working in 10.6.8 working great) however in lion server you can only have ONE timemachine backup destination.apple put an Share items/Backups folder with a .com.apple.timemachine.supported file in it. and set permissions to a group com.apple.backup_access However i can't dublicate this setup and have the system accept an extra folder on another drive.Â
Info:
Xserve, Mac OS X (10.7.3), Lion Server
1 "Put the computer to sleep when it is inactive for.."
2 "Put display to sleep after..."
3 "Put Hard Disks to sleep when possible..."
I'm guessing that #1 won't spin down the Hard Disks unless #3 is checked? Is that right? I'm also guessing that if I'm downloading a file or securely deleting the trash my iMac won't go to sleep? The reason I ask is because it seems like if I'm deleting the trash and my display goes to sleep, when I come back to the computer i really don't see any progress. What options do you guys typically use? I keep my iMac on 24/7, but didn't know about the first sleep option.
This error probably indicates a hardware problem or some system malfunction. I usually try to find out what exactly went wrong to take measures to avoid the repetition of the same problem. Exchanging the HD and restoring the sytem may be the quicker solution, but I would miss an opportunity to reconfigure my system to make it more robust.Â
The system in question is a MacMini (Model A1347) with Os-X-Server 10.6.7. and 2 physical HDs: HD1 has 2 Partitions, the smaller for the server OS, the larger for the Shares (We use the MacMini only as a file server). HD2 is not used (was kept in reserve for cases like this). Â
That there may be a problem manifested itself first when the mounting of the shares on HD1 became suddenly slow (within 2-3 days) and eventually failed. I first tried to copy all the files from the shares on HD1 to HD2 before attempting any repair actions. Most of the files copied properly but a few failed with error (-36). Those few can be restored from backups, so there is no data loss. Remains the question, what went wrong? Â
It may be pure coincidence but just before the File-Server failed there was an attempt to upgrade a 3rd party software on one of the clients (17'' MacBook Pro / OS X 10.6.8) to a newer version. Could be that new version was part of the problem because the data files of this 3rd party software are stored on one of the shares on HD1 and the data file format has been changed between the versions. For obvious reasons I need to make sure that this data file conversion was not the cause of the problem?
1) first check the HD1 with a different tool than DiskUtility (It thinks the HD1 is in perfect shape), TechTool Pro or DiskWarrier comes to my mind, any reason to prefer one over the other?Â
2) Hopefully those tools can reliably test whether the HD1 is damaged or not. If it is the former the HD1 replacement option is the way to go and there is no more reason the 3rd party software may have been involved. However if HD1 is not damaged I'm left with the uncertainty of what exactly lead to the problem..?Â
3) Is there any check I should do before I just re-format the HD and re-install the OS and switch back to an earlier version of the 3rd party software to be on the safe side? Â
Info:
Mac OS X (10.6.7)
I have a question about installing an OS to try on a USB hard disk. If I place the ISO on this drive and boot to it, and continue on with the install process, where will it install to? This is important because I do not want to lose all of my Mac files.
View 6 Replies View RelatedFour days ago my Macbook pro stopped working while I was doing internet. I had to shut it down but it never booted up again. I tried multiple times to format it with disk utility but it never worked utile at my 25th attempt, disk utility finally detected it so I formatted it but when I tried to install OS X, the disk couldn't be detected just as before. I thought that my HD was dead so i bought a new western digital scorpio blue 320 GB 5400 rpm. Now, it's the same story as before, my new hard drive is never recognize by the installation cd.
More infos:
- The drive is turning (it has power)
- With my first HD, i couldn't open the OSX partition but I could open the Windows partition.
- With my new HD in, the installation cd of OS X and windows cant detect the hard drive.
Hey guys, sorry this may seem like a basic question but here goes. There are many, many pages, websites and videos on how to install a hard drive into the MP, no problems there what my question is, is what's next?
The HDD is arriving Tuesday, once I have installed what will I have to do to it to make it a part of my current HDD. I assume Im looking at a RAID 0 using disk utility?
Before I do that will I have to install 10.5 on the HDD or just use disk utility to format it?
Currently we have a mac pro with 3 1tb hard drives in raid configuration. I would like to installed windows on the 3rd hard drive. Installing via bootcamp doesnt work as it will only install on the same hard drive as macos. I tried to install windows by booting the cd but it doesnt see any of the hard drives. Is this due to the raid configuration? If so, how would i go about it I even formatted a partition on the 3rd hard drive in fat so windows would see it but no luck.
View 5 Replies View Relatedi tried the online support procedure and all i get is a message to fill in my serial number followed by "your model is no longer under waranty. contact a dealer..." although the link that brought me to that page is supposed to be for do-it-yourself-instructions. thx for a lead. my G5 is sitting in pieces til then.
Information:
Dual Core G5, 4GB, 20" Cinema Display, NV7800GT, 4GBRAM
Mac OS X (10.4.10)
Harddrive blew on my macbook and its out of warranty. Can I just buy a harddrive and install it and put in the Mac OSX installation CD and it will be ok. Or is there something fancy formatting i would have to do before installing.
View 3 Replies View RelatedI just bought this and i have 24 MB left on my macbook, is there an option in the installer to format the hard drive?
View 5 Replies View RelatedMacbook harddrive crashed (flashing question mark folder etc.). Bought new harddrive (2.5 in SATA), and reinstalled. Don't have original installation DVD so used legally acquired Mac OSX. Now instead of folder, the Apple logo appears with spinning gears but otherwise unresponsive. Can't install or eject DVD.
View 2 Replies View RelatedI've been looking into this a lot the passed few days, but there are a few answers I just can't find.
First of all, I know how to physically take apart my mac and put the new hard drive in. I have the new hard drive, and the tools I need.
The method I chose (before I looked into how to xfer data using macs) was to use time machine to make a backup of my entire hard drive on an external, which I did successfully.
However, before I take apart my mac and instal the new hard drive, there are a few things I want to be clear on, and I can't find the answers to.
Will I need the leopard OS disc for the new hard drive? Or does time capsule back up the OS as well, and give me some sort of prompt (doubtful)?
I have the pre late 2008 macbook pro, and it came with leopard. I haven't upgraded for several reasons I won't get into. My question now is, should I have the leopard OS disc? SHouldn't something like that have come with my mac? I ask because I feel like I should have one, but I don't remember getting one and can't find it anywhere. I always keep things like that.
And lastly, if I don't have the leopard OS disc, what do you think is the cheapest way for me to back up and xfer my data?
I have external hard drives, my new hard drive, and my old hard drive. Would it be cheaper for me to buy one of those things that directly xfers the data from one internal drive to another, or to buy another leopard disc? Is there a way I can just order the leopard disc I should have already for cheaper?
I asked about running Snow Leopard on my mac after a hard drive fail. I'm having issues with formatting a new hard drive in my mac. I have a 2007 black macbook and I'm trying to run a 160gb SATA seagate hard drive. After replacing this hard drive, I booted my mac up from cd, ran through setup fine until I got to the 'select a drive to install to' - the point where my hard drive should be visible. Nothing there at all. Nothing to click on in the box. My question is, is there a process I need to undertake to format the hard drive or is this an indicator of a much bigger problem?
Info:
MacBook, Mac OS X (10.4.11)
