I can't seem to get my MBP to wake up from standby when I close my lid. It works on the Mac side but not with XP. In fact when I close the lid it shows "starting standby" but never really goes into it. What settings do I need tweeked?
View 3 RepliesI am trying to create a resume in pages '08, but the header on the resume template is way too big for my purposes. I would like to shrink it so I can fit ~ 2 more lines of text onto the first page.
I have tried
1. exporting it to word
2. clicking everywhere in on the page
3. shrinking the line spacing between subheaders and sections, but it was not enough.
4. swearing
Is it possible to make the spacing of the header smaller, or am I just sol?
I try to start up my May 2009 MacBook I have to hold down the "option" key and the select the "Macintosh HD". I tried to install Windows XP on it one time but I canceled during installation does any body know how to fix this or somethhing
View 1 Replies View Relatedwhen i was working on my master thesis document, i closed my macbook(physically with display down). He goes into standby. But when i opened it again, he didn't woke up. Pressed every keys, touched the touchpad, nothing happened. Then i hard rebooted, nothing happened, only the fan started making extreme loud noise. So i did a hard shut down, disconnected everything(powersupply, battery,usbstick,etc etc). Inserted the battery and the powersupply again and booted. My screen lit up, logo appeared, and the cicle(busy icon of the mouse) but it didn't rotate.
View 6 Replies View Relatedhow do you put it in a standby yet still leave you MacBook Pro running?
In my case if I switch to a non-existant input on the display it sits in the screensaver continually and never goes to power save mode.
Randomly, when in stanby, when I click mouse to wake my iMac (2.66 Ghz 20" '09 model), the screen remains black and nothing happens.
I have to turn it off with the power button and then on again.
Today at school, I was using my laptop as normal. During lunch time I just closed the laptop display screen (so it goes on standby) and placed it in my bag. 1 hour and a half later, I go into my bag to reach for my book. My whole bag and books were VERY warm. I touched my laptop case to find that it was even warmer. I pulled out my laptop and I had to set it down immediately because it was far too hot to touch; eggs could have been fried on it (no exagerration). I was scared to open it, so I placed it outside in the cool air and now it has cooled down and I've started up again. This has never happened before, I've never dropped it and my laptop is just a year old this month (convenient now, that the guarantee just expired ).Problems first started occuring when I updated to Lion. First thing I noticed, is that it starts up and shuts down SO slowly (slower than a PC, believe it or not) and I only have 53,15 GB out of the 319,21 GB available used. So there is 266 GB FREE space. So I figured this cannot be the memory. After 2 months or so, I also noticed that when I turn on my computer, the Apple sign on the startup comes out very stretched, sometimes it comes up on the left hand corner and the rest of the screen isn't white but coloured lines. 3 days ago, I noticed the fan was making a funny sound. This stopped 2 days later, then today randomly on standby it beyond heated up. Why is this happening? MUST I go to the shop? (I'm a student and cannot afford 500EUR repairs at the moment, other than the fact I cannot live without my laptop for 6-8 weeks as I have all my coursework to do, etc.)
Info:
MacBook Pro (15-inch Mid 2010), Mac OS X (10.7.3)
I have a MBP which I purchased in August of 07. I have never had a problem with it. However, recently I have noticed that the battery is discharging when the computer lid is shut and the laptop is not plugged in. This weekend I left the laptop unplugged with a full charge and when I arrived home, the battery was around 17%. Also, the health of the battery is 75%.
View 9 Replies View Relatedwhen the computer goes to sleep, I can't seem to wake it back up when I come back to use it. The screen is blank, my 24" ACD is blank although the backlight is on, everything seems to be on but nothing is on the screen.
The only I get it back working is by holding the power button down and having it to force shut down and then start it back up.
Im really sorry if this is a silly question. I was playing football manager, then had to dash off somewhere for 15 mins, by the time i got back the screen was black, i just assumed it was on standby, i pressed space bar to carry on playing and NOTHING happened.. i pressed the on|off button and nothing happened.. i pressed and held the button to switch it off.. nothing happened..
It is still running now, but nothing is activating it, i pressed the caps lock button to see if the keyboard was operating and it didnt light up as normal.Im just letting the battery drain on it to see if it does anything on the reboot.. i dont know what else to do.. please advise!!!I only purchased it on Fri.. so its 2 days old i really hope it isnt broken already, there must be a simple answer for this? I look forward to reading any advice,
how to be able to change the screen that when I come out of standby and waiting to enter a password from plain black to a graphic.
View 5 Replies View RelatedAfter standby mode my iMac 2011 with 10.7.3 seems to run corrupt with the kernel and activitymonitord tasks. CPU usage on one core runs to 100% only by scrolling fast in a window (finder, firefox, activity window). It happend without any system adjustment nor on any update or new software. Had the same issue months ago. Helped to went back to 10.7.2 and upraded again to 7.3 via combo update. System is after standby not usable, have to start system new as work around. Found same issue with other users on the web, but no solution. Â
Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.7.3)
Just wondering but, does the MBA actually stay turned on during this?
View 3 Replies View Relatedhow to turn the light off while the macbook is in standby mode?
View 10 Replies View RelatedI bought one of these: [URL] and decided to do an experiment, now on standby (Laptop cover closed) it consumes 1.432 per night (8 hours). Laptop on standby, Cover Open but Display in Sleep mode for 8 hours costs 4.731 per day. So that means per month on standby at night, my Macbook costs 44.392. This can't be right? Because if it is, I might have to turn it off at night from now on.
View 9 Replies View RelatedI downloaded the latest software update for Leopard. I've noticed that when I wake my MBP from sleep, the brightness of the screen is very low. I have to click on "F2" to increase the brightness of my screen.
View 1 Replies View RelatedJust bought a new 15" Macbook a few days but I have a serious problem. Every time I conntect it to my HP x2301 (also brand new) with a minidisplay > DVI cable and the Macbook goes to sleep the monitor won't take up after I wake up the Macbook.
Info:MacBookPro, Mac OS X (10.7.3)
the stand by battery life of the MBP, obviously it's not a patch on the Air's?
View 1 Replies View RelatedNew Macbook pro sometimes displays a grey screen on switch on or resurning from standby, which I erase using the trackpad in order to get to the login screen. The same thing happened to the first laptop which I only purchased last November 2011.Last machine eventually slowed right down. Apple genius people say they have never heard of this or seen it.
Info:
MacBook Pro, Mac OS X (10.7.3), this is my second laptop in 3 mths
I have a MacBook Air 2011?Sometime, after a long standby, it wakes up with the built-in web camera disconnected.Facetime, Photo Booth, and Skype does not detect the camera, whilst for some reason, Google Chat inside Chrome actually sees it and is able to use it. Looking at the "About This Mac" I can see that the web camera is detected. However I am hoping that I don't have to keep rebooting it just to do a video call on skype.
View 9 Replies View RelatedJust a quick question, been searching for an answer the last few days, but been unlucky...I'm just curious, why has my Cinema Display standby light stopped glowing (from dim to bright then back again)? I'm sure it use to do this when i first got it - the display itself is only 6months old
View 1 Replies View Relatedmy problem is since the update to 10.7.3, Lion isn't waking up from standby when I have left my external Monitor attached to my MacBook Pro. It will flash the keyboard backlight, but both displays remain black. And when i disconnect the external one, nothing happens. Only possibility to come out of this state: Hold power button for some seconds until it shutds down "hard".Â
View 7 Replies View RelatedEvery time my mac goes into standby the wifi connection needs to be manually joined, so trying to connect remotely is impossible without joining a wifi network manually.
Info:
iMac, Mac OS X (10.7.3)
If I set my macbook pro ( Lion ) into stand by, after a few hours it's completely off. I have to push the power button to start it new. I have this problem since I've installed OSX Lion.
Info:
MacBook Pro, Mac OS X (10.7.4), I7 , 4 GB ram , 500 GB HDD
Purchased machine in Dec. 07. All well till Nov. 08. Since then have noticed that it will go into standby then wake up. This happens regularly, sometimes after 1 hour, or 2 hours or a few minutes. Have tried to put it in 'sleep' mode but wakes up just the same. All day and all night. So tried "shut down' and it does it as well. Like a ghost is working it.
Have been in constant touch with APPLE CARE, and they made me get another user (test) and it did not seem to wake up in that user. Went back to my user and problem started again. Spoke with 2 product specialists and one said that it cannot be EYETV, as he had it on his Mac and it was fine. Second specialist said it is EYETV and I should contact Elgato. I did this and was sent a link to 'repair'. Followed the instructions and that did not help. 4 days later, my computer suddenly remained in stand by all day.
I was surprised and relieved. Than it started all over again. I am at my wits end. I can only make it stay shut down if I go to 'shut down' and wait for the screen to go black then turn it off at the power point. I am sure that I should not be doing this, but what else can I do? I will contact APPLE CARE again, but will wait for your reply first. Also, I get a little message saying...Time Machine Error. Unable to complete backup. An error occured while copying files to backup volume.
my problem is since the update to 10.7.3, Lion isn't waking up from standby when I have left my external Monitor attached to my MacBook Pro. It will flash the keyboard backlight, but both displays remain black. And when i disconnect the external one, nothing happens. Only possibility to come out of this state: Hold power button for some seconds until it shutds down "hard".Â
View 2 Replies View RelatedCan anyone suggest freeware resume creators for mac?
View 1 Replies View RelatedWe purchased the Starwars lego app game and it will not resume downloading.It has been over a month with no response?
Info:
MacBook Pro, Mac OS X (10.4.11)
I have two annoying issues and hopefully one of you can help. i have looked around and cannot find an answer to my question, especially my second one (which i think is connected to the first one). I am using Safari 5.1.3 and OS X 10.7.3. One of the accounts works perfectly, the other has two issues:
1 - Safari will always start with the same set of old windows, even closing some of them and then reopening safari will always get us to the same old set of windows. I understand the (new) standard behavior is that if i open windows A, B and C and then quit Safari, at reopening it will open the same windows A, B, and C. If i now proceed to close window (or tab) C and then quit Safari at the next opening i shouldbe presented with A and B only. This is not the case for me, i am presented still with A, B, and C. I can add to the windows but not subtract. Clearly something is wrong here. Thoughts?
2 - Trying to debug problem 1 i decided to close all the winodws in Safari, then in System Preferences-General uncheck the "Restore windows when ..." and so i hoped that closing Safari and reopening would get me to just the homepage, but this was not the case and i was presented with the same old set of windows. This is easily explained by the fact that under system prefs-general the box i had unchecked was still checked. It lets me uncheck it but does not retain it.... I obviously tried rebooting to no avail.
Info:
Mac Pro, Mac OS X (10.7.3)
I noticed it yesterday nite when I was downloading the 2.0 firmware. at about 50% complete, my ethernet showed an error and the whole thing went to 0.0 kb. at that time i thought maybe it happens so with the firmware download but the same thing is happening with podcast downloads. I know for a fact that resume used to work earlier. now, if the download is interrupted, it goes back to zero.
View 3 Replies View Related