One of the problems that myself and i'm sure many others have come across is getting audio to go to external speakers via the audio jack.
When i plug it in it says a device has been plugged into the audio jack and when i go into it, it brings up the line in tab, so just wondering if there was a solution yet or do we just have to put up with inbuilt speakers on our macs?
I have Bootcamp 3.1 and Windows Vista Home 32bit is fully up to date.
The audio on my Mac Pro 2008 will play out of the front speaker but will not through my Klipsch 2.1 system. I checked and rechecked to make sure I have the audio cord plugged into Audio Out on the back of the Mac. When using OSX the audio plays just fine through my 2.1 system.
Any ideas on what I can do to troubleshoot the issue?
Trying to figure out if something is up with mine and a buddies machine specifically or they are all buggered....
Please post if you have an audio pop or click type sound that is intermittent (every few minutes or couple hours) on your i5 or i7 machine while playing audio through external speakers.
If you have it, please describe your situation as it occurs so we can perhaps isolate it:
I.e. Plugged in / on battery, programs running, usb plugged in, etc.
Mine happens whether on battery or not, iTunes, games, movies, Locked in video card...
Is there a way to play audio through the headphone jack and speakers simultaneously on my MacBook?
View 3 Replies View RelatedI have an Airport Extreme with a USB hub plugged into it and two hard drives plugged into that. I was wondering if there would be a way to add a pair of USB speakers to it and play music through them wirelessly (like AirTunes).
View 1 Replies View RelatedI thought you should be able to.Play iTunes audio out through USB to a receiver equipt with USB mode as I can with my iPad Air, but I can,t find in preferences on my 2013 iMac any out put and I get no signal to the receiver/amp. Is it possible? What am I doing wrong?
Info:
iMac (27-inch, Late 2012), OS X Mavericks (10.9.4)
I had audio coming out my external speakers.
Then I fiddled with both Soundflower and Audacity for some audio recording.
I have since then uninstalled both but I can't for the life of me figure out how to get audio coming out my external speakers again.
Everything is coming thru my imac speakers.
Apple>Sys Pref> Sound> give me no options to direct audio to external speakers.
I have a new aluminium 2.53 MBP and have installed vista 64 ultimate on it via bootcamp.
I have noticed that I am having problems with the audio, there is no audio from the internal speakers at all and when ever I boot up in vista the audio jack has a red light coming out of it...This only occurs in bootcamp and if i go back to OSX the problem disappears
I have installed the latest driver from realtek and have tried to fiddle with the audio jack using cotton buds etc, but nothing seem to work... are there any other ways from rectifying this?
The audio on my macbook suddenly stopped working. When I click on the audio adjuster, it won't even let me change the level (the little circle is white now, not blue).
But when I plug in headphones or an external speaker, everything works fine. I can once again adjust the audio and get sound
There was a red light eminating from the audio out jack for a while (last couple of days) but today, there is no longer a red light. Still no audio from the speakers.
I have owned my MacBook Pro since June 2010, and have always used a pair of independently powered (via adapter) external Dell speakers for audio output. Since upgrading to Lion about 1 month ago, I was having intermittent audio issues, which were resolved by re-starting my computer (not ideal but it worked). Today, the speakers just stopped working. The internal speakers work, but when I plug the externals into the headphone port, they don't produce sound. Earbuds in the same port also don't work (but the earbuds are good). The external speakers are being recognized by the sound panel in system preferences.
Info:
MacBook Pro, Mac OS X (10.7.4)
I have owned my MacBook Pro since June 2010, and have always used a pair of independently powered (via adapter) external Dell speakers for audio output. Since upgrading to Lion about 1 month ago, I was having intermittent audio issues, which were resolved by re-starting my computer (not ideal but it worked). Today, the speakers just stopped working. The internal speakers work, but when I plug the externals into the headphone port, they don't produce sound. Earbuds in the same port also don't work (I know the earbuds are good). The external speakers are being recognized by the sound panel in system preferences.
Info:
MacBook Pro, Mac OS X (10.7.4)
Although this isn't a very important problem, I have noticed on my early 2K8 Mac Pro the Boot POST chime will not play through external speakers. Is there a way to enable this, as it is awfully tinny from the internal speaker.
View 3 Replies View Related15 inch MacBook Pro. Internal speakers will not play. Output to headphone plug did work. Now I cannot insert headphones into socket, it seems to be too shallow. There is no red glow as mentioned in other posts. I had the red glow issue on an older MacBook and resolved it by inserting toothpick into socket and triggered switch. I have used command, option, r and p reset.
Info:
MacBook Pro, Mac OS X (10.7.3)
I just bought a pair of the Rokit 5 external speakers. When I plug them into a Mac Pro (Tower) I get a high-pitched hum from the speakers each time I try to play a sound. So if I go into System Preferences/Audio, and I try to play a sound, the high-pitch is heard as the sound plays, and for a second or two after, then it goes away, and is heard again each time I try to play a sound. Same with when I play something thru iTunes or any of my audio apps.Â
If do the exact same thing playing from a Macbook, I do not have that problem at all, the sound is nice and clear with no high-pitch sound.Â
I have the speakers plugged in using 1/4 inch jacks to an external sound card (MBox), and this audio card is plugged USB into the Mac.Â
Info:
Mac Pro, Mac OS X (10.6.8)
I hope I'm not double posting. Have any of the other new iMac owners experienced weird frequencies coming from external speakers that are connected to their iMacs?
For example: I have a set of studio monitors that are hooked up to my iMac using a firewire audio interface. Whenever I'm copying data I get an extremely high-pitched frequency coming from my speakers that sounds like my hard drive spinning. Also, whenever I'm scrolling or moving the magic mouse I get a loud buzzing coming from the speakers (especially when scrolling). None of this stuff happened with my previous 20" iMac C2D. I have experienced this issue with all three of the 27" iMacs that I have gone through thus far (due to the yellow tint issue). Does this sound like something I'm just going to have to live with. All of these high pitched frequencies are driving me batty!
I am trying to connect my MacBook Pro (4 yrs old) to an external monitor via HDMI. I am mirroring the display and video works fine. Sound won't play thru thru the TV, only thru the laptop speakers.
Info:
MacBook Pro (15-inch Early 2008), Mac OS X (10.5.8)
MacBook Pro 2.16
10.4.11
Situation: no sound out from speakers in admin and user account and newly created account. Headphones work, startup chimes work on speakers.
Go to Sound in Preferences and only shows Digital Out for output. Should show Internal Speakers. Ran Diskwarrior and Applejack and zapped pram. Took mac apart and confirmed speakers wired correctly which is verified by the start up chimes being audible on the internal speakers. tested all accounts and created new account all with the same results. Did search of Google and MacRumor. Found one unaswered post indicating same problem. Had same problem with another macbook pro, ran same steps, take apart, confirm wiring setup, Diskwarriored, applejacked and zapped pram and it fixed the problem. I'm not sure what else to try. Did check Audio Midi Setup util and it also did not see the internal speakers.
I have searched a lot for this question and have not found an answer.
I am trying to play a .avi video on my MAC that was originally in .rar compressed format. I opened it in VLC, and the audio wont play.. so i checked the info and saw that:
video codec: XVID
audio codec: mpga
I have perian downloaded.. it doesnt seem to be doing anyting. I dont know if i've missed something in my extracting process of the .rar file.
I have my AM radio plugged into the Line In on my Mac Pro. The input level in the sound prefrences reads fine, the meter is bouncing up and down like it should.
But I can't get it to actually play out the speakers. I recorded some of the audio in garage band, and that worked, but I still can't hear it unless I play the recording back
Is there ANY software or anything I can do to just hear what is coming in through the line in out my internal speakers?
I have a MacBook, I would like to record just the audio of some YouTube videos. Is there any program that allows you to do that?
View 8 Replies View RelatedThis is the second time an update has done this to me (Early 2008 Mac Pro). Run the update (10.6.2) - reboot - "sound effects" and "output" changed from "line out" to "internal speakers". What's up with that? Not a big deal - but kind of a pita when I get a call at work from a family member asking why iTunes is playing from the internal speaker...
View 24 Replies View RelatedIs there anything to be done to resolve this issue without going to a repair center?
Info:
MacBook
Pro, Mac OS X (10.7.3), reducing volume is no help
Random question, but does anyone know how to get a usb microphone to play through speakers? - i.e. I want to use it in a karaoke kind-of-way!!
View 2 Replies View RelatedIs there a simple way to play the sound coming into audio input over my speakers (headphone jack)? I have two macs running side by side and I would like my new mac to act like a receiver for the old one.
View 7 Replies View RelatedI was wondering if it's possible to play sound through the speakers and headphones of a computer simultaneously.
The reason I was wondering if it would work, is because I'm recording a song for school, and I can't hear the backing track through my speakers, but my computer still picks it up. However if i we're to use headphones and my speakers could be playing the same thing at the same time, everything would be fine.
I tired watching a video and playing music, but the nothing comes out of the speakers. They both play but no volume.?
Info:
MacBook Pro (13-inch Mid 2010)
I need to transcribe audio files and need an application that will play audio files at double their rate (and half their rate) so that I can quickly go through audio files and then concentrate on the pertinent portions. Any applications for Mac OS X? Free is always good!
View 3 Replies View RelatedI am streaming iTunes to another room using an Audioengine AW1 (over usb, not the analog input) and it works fine. Looking at JACK audio, Soundflower or Apple's AudioMIDI utility, I feel I should be able to use one or a combination of these resources to output iTunes to both the AW1 and my desktop's headphone port. Unfortunately, I can't seem to perform both. Well, technically I can in using a "y" audio cable to output from the Mac headphone port to headphones and to the analog-in on the AW1's, but that really doesn't work adequately. The output volumes are considerably lower and tied together. I am looking to figure out how to add a usb audio device as another, and simultaneous output.
View 3 Replies View RelatedI want to disable audio output on my MBP, either entirely or just disable the built-in speakers. I don't want to mute it and be able to raise the volume and it'll start working again; I want there to be no possibility of sound unless I go back and fix what I changed. I know this sounds weird, but does anyone know how to do this?
View 8 Replies View RelatedJust got my 15 LED SR Macbook Pro. When I plug my bose speakers in at my desk and listen to itunes, I am getting a static pop sound. Should I take it back or is it fixable? By the way, LG panel and no yellow 1/3 of screen. Initially thought it was yellow, but I calibrated it, and now it only looks yellow if viewed from the side. Head on, white. One thing I have noticed, when I watch movies on it in the dark with the brightness turned down (cause this thing is a torch), I am getting quick flashes when a screen has high contrast light and dark. I am very sensative to LCD flat panel TVs that use a colorwheel. Like a JVC dilila, I see rainbows! Is that normal for an led flat panel to see "quick white flashes of light"?
View 8 Replies View Related
