creating and then removing a Win7 partition, restoring the initial single-OSX partition layout does not have any impact on my OSX installation, right? There should be no risk for my OSX installation, but I want to have your confirmation before proceeding with the installation of Win7 on my MBP.
View 11 Replies
I am a student at the University of Miami and i need to run MatLab on my computer. They have the MatLab software available to me but only for Windows. They told me that they can install Windows for me but its going to take a week. IM NOT WILLING TO GIVE MY MACBOOK UP FOR A WEEK!!!! Specially becaus ei need it for school(and to browse this site lol). So i was wondering how much it would cost me$$$ to install Windows, is it available for free download? Is it complicated to Install? and if it simple enough can somebody give me a simple step by step?
View 5 Replies View RelatedI just recently install window 7 32 bit via bootcamp. The process went well and i m able to start window 7. However, i notice that on my computer in window 7. There is a bootcamp partition and a macintosh partition as well. I am able to access the macintosh partition and see all the files, apps that is in my mac os. The question is that can the macintosh partition be infected by virus or somehow changes some setting???? If so, how can i disable it so that it wont appear and not get infected by virus?????
I know that window can read the mac partition on bootcamp but not write. I am not sure how this work so can someone help explain how this work??? Will the mac partition be infected virus or damage and change anything setting that related to mac os????
I just ordered my MBP and I will be installing Vista for my course work.
I have opted for the 500GB hard drive, which I plan to divide equally between Leopard and Vista.
I was wondering if it is possible to create another partition (or two) within this Vista installation (e.g. C:, D:, E:, etc...).
I want to create a Windows partition to load Windows 7. But the Bootcamp assistant returns a dialog box saying I must update my boot ROM firmware before using the setup assistant. This happened AFTER I installed Yosemite 10.10.1. I previously had Windows successfully installed when I was running Mavericks.
In clicking the SMC firmware icon in Launchpad I get another message saying "An unexpected error occurred (28). Your firmware cannot be updated."
Info:
iMac (21.5-inch Mid 2011), OS X Mavericks (10.9.5), 20" iMac, 250GB H/D, 512Mb RAM.
I'm having trouble starting Mac OS X after removing the Windows partition of Boot Camp.
I get a black screen that reads,
" no bootable device -- insert boot disk and press "
I can load Mac OS X if I press the Option key during startup, and select the Mac hard drive.
How do I load up the Mac OS X system without having to do it manually? I'm a brand new newbie with Macs.
IMac OS X 10.5.6 on 392.86 GB (392,855,289,856 bytes) of HD. 392.86 GB (392,855,289,856 bytes) of Windows Vista on what is left of original drive. My first action was to format the "Spare Disk" HFS+ which was successful but. The anomaly began once I removed the Bootcamp partition. I now have two drives which was once the original drive. The drive which had windows on now appears as "Spare Disk" when I view it through System Profiler but does not show up in the finder menu. It now appears as though the "Spare Disk" us useless and wasted space. My goal was to remove the BC partition and reunite the windows partition with the original. I'm not sure if I'm explaining this properly but simply put, I would like to connect the spare disk with the original disk so I have more usable space.
View 24 Replies View RelatedI want to make a clean reinstall of snow leopard without removing my bootcamp partition. Is it possible to do that and to continue using windows after the reinstall?
View 1 Replies View RelatedNow, I set up a partition to run Ubuntu on my MacBook, but now I want to remove that partition to make room for Windows XP. When I go to Boot Camp Assistant, I try to click 'Continue' but it gives me this: I thought I could fix the problem using Disk Utility, but I couldn't understand what I could do. I thought it would work by erasing them, but I may have made the problem worse. Here is what it looks like: I tried booting the Ubuntu disc as I read I could remove the partition using that, but I don't understand how that would work.
View 2 Replies View Related"The disk cannot be partitioned because some files cannot be moved. Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again." Does it really mean I have to partition my whole hard drive and then reinstall everything? I'm hoping I'm just misinterpreting....
I have had my uMBP for about two weeks, I boot camped, decided I needed more space for windows, used Winclone to clone my windows partition, merged the windows partition back into OS X, and now I get an error message when I try to repartition. Please tell me there is an easy fix. BTW, my harddrive is 250GB, there is 87GB free, and I am only trying to create an 81GB partition.
I installed Windows on my 2nd Mac Pro HDD and noticed today that my OS X partition (formerly disk0s2) became disk1s2:
Code:
MacPro:~ Alex$ diskutil list
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: FDisk_partition_scheme *149.1 Gi disk0
1: Windows_NTFS Windows 149.0 Gi disk0s1
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *139.7 Gi disk1
1: EFI 200.0 Mi disk1s1
2: Apple_HFS Macintosh HD 139.4 Gi disk1s2
Basically the 1st HDD is disk1 now and the 2nd HDD disk0. Why did that happen? Nothing to worry about but I'd like to have it the other way around as it was before Any way to change that?
I have just installed a windows vista partition on my 17 inch macbook pro and when I insert the mac osx installation dvd in order to install the mac drivers the on the windows partition the d drive shows that something has been inserted but the cd has no name and whenever I try to click on it says nothing is on the cd. However when I insert the dvd in the mac osx partition it reads the dvd fine. Why is this? There is a scratch on the dvd but what difference would it make if the mac partition is reading it fine?
View 4 Replies View RelatedSo here the deal. I have a single hard drive in my MacBook Pro. Its made up into 2 partitions (one for os x and the other for data). I want to make the OS X partition into 2 separate partitions (so I'll have a total of 3) without erasing any data. I want to use that new partition to install windows. When I select the OS X partition, and set it to format at NTFS, it says the size cannot support the filesystem (25GB in this case). What size does it have to be then? Or should I format as FAT32?
I know FAT32 has a 4GB file size limit so I don't want to do that because I want to install some games on the Windows partition. How should I go about doing this?
I am trying to follow the following guide to do a triple boot, but I am stuck in Windows 7 installation
triple boot snow leopard, windows 7, & ubuntu
I have done the following:
1. Did a clean installation of OS X Snow Leopard on hard drive (Not yet partitioned the hard drive)
2. Installed rEFIt
I am not sure what the poster means by making sure it works by pressing the option button. I am assuming it means that I will be able to see the options I can choose when I press option? (I do see options to pick either "Hard Drive" or whatever disc in the DVD)
3. Partitioned 30 GB (or was it 40 GB? x.x I forgot sorry) space in Boot Camp Assistant for Windows installation. Chose the option to install Windows later.
4. Inserted OS X Snow Leopard installation disc and boot from there.
5. Opened up the Disk Utility and partitioned a hard drive (called Hard Drive_2) via the Partition section as instructed by the guide. Formatted in MAc OS Extended (Journaled)
So now, in that area I see "Hard Drive", "Hard Drive_2" and "BOOT CAMP" (so I am assuming that is what the poster meant by "3 partitions".
6. Restarted the computer with Windows installation disc.
Problems occur right here:
Problem 1: I do not see anything called "C something" as the poster said. But I do see something called "Boot Camp"
Problem 2: All the partitions that are available says that "Windows 7 can't be installed". So my question is am I supposed to "delete" a specific partition to install it?
I have pictures of the screen which I will upload later if this isn't clear enough.
So, I am in the process of attempting to partition my disc so that I can boot windows XP.
Know that I am in no way even a capable mac user, so I might be a bit slow... sorry.
During the partitioning process, using boot camp, I get a message saying that I need to reformat my disc so that it is a single Mac OS Extended (Journaled) disc. So, I go to my Disc Utility, and it says it already is a Mac OS extended bla bla bal. So, my question is
Why will it not let me partition, and do I really need to reformat my everthing eventhough it already is in the format it wants to be in?
I'm unable to find out how I can create a primary partition on a USB stick using OS X (I could just go to my Windows or Linux machine and do it there, but it just annoys the hell out of me that I haven't been able to figure out how to do it on my Mac so far).
I want to make one partition of the USB stick bootable (to keep a Windows 7 installation CD image on it) and use the rest of the USB stick for a data partition, but while the Disk utility allows me to generate two paritions, I can't find a setting that allows me to specify that one of them is primary.
For those not in the know, a restore partition is essentially a partition (sometimes hidden) that contains an OS installer. It's quite common on Windows Machines. I'd love to be able to have a bootable OS X Installer on my MacBook Air's SSD� Just so I have the flexibility of reinstalling, or booting from the 'install disk' wherever i please, regardless of whether I have the MBA Superdrive with me.
I would think that the solution is basically making an image of the OS X 10.6 installer. Partitioning the MBA SSD, restoring the OS X 10.6 installer onto the smaller 'Restore Partition'. Potentially even calling the smaller partition ".Mac OS X Restore", as the period at the beginning of the volume name will stop it from appearing on the finder desktop.
i am trying to format a brand new 120 GB hard drive via an external USB 2.0 enclosure. About 25 minutes ago, I selected the "erase" option and slected the Mac OS Extended (Journal) Volume format. For the last 25 minutes, disk utility has been saying that it's creating a partition map. It's doing nothing.
I have reason to believe my enclosure may be faulty. (I had a similar problem on an old hard disk and thought that the problem was with the disk; now I know.) I need to know: How do I disconnect/eject the hard disk without damaging it? The eject option in Disk Utility is grayed out. If I attempt to quit Disk Utility I get a warning telling me I could leave my disk inoperable.
I am trying to reformat a 500 GB USB HDD to one FAT32 partition so that I can use it on a Mac and a PC. I have seen many references to using the disk utitilty and creating a partition in MS-DOS format, but my computer does not have that option. The only four options I have are Mac OS Extended, Mac OS Extended (Journaled), Unix and Free Partition. Am I missing something here?
View 7 Replies View RelatedSo I have a Macbook Pro (15 inch, ~late 2011, 10.7.4) with a Windows 7 Boot Camp partition. I need to run a software for work that is only compatable with Snow Leopard, so I was thinking about trying to create an additional partition that has Snow Leopard, for a total of 3 partitions: Lion, Snow Leopard and Windows 7. However, when I went in to create the 3rd partition, I came across the following warning:This disk appears to be paritioned for Boot Camp. Changing the partition map may make this disk unbootable using Windows. I did a quick search online but didn't really get any clear cut answers on what could happen. Is what I want possible without wrecking my Windows partition?
View 7 Replies View RelatedThis question concerns the new mid-2011 27" iMac I haven't used yet The internal HD's size is 1TB. Before I start using it, I'd like to:
1. resize the exiting partition (containing Mac OS X Lion) in order to make it smaller (about 100GB)
2. create a new partition in the remaining space. I would use as a data repository (like an external Thunderbolt hard disk).
Info:iMac, Mac OS X (10.7.3), mid-2011 27" iMac
I frequently have to repartition my drive and reinstall OS X (mainly because I work with multiple OSes that keep changing). In order to simplify the process, I'd like to create a disk image of my system partition that I can simply restore after repartitioning. However, is that even going to work if the new partition (the destination partition) has a different size and is at a different place? What about the boot sector? Will I be able to boot from the restored image?
Info:
MBP
I currently have a small partition on my 27' imac allocated to Bootcamp which I now no longer require. I would like to remove this partition and restore the complete drive back to OSX without losing any vital info. Yes, I have done research on this however I remain a little confused. I would be grateful if someone would take the trouble to confirm that this is possible and, if they have the time, write a simple step by step procedure for me.
Info:
iMac, Mac OS X (10.7.3)
Ive lost Hd space after removing my windows partition (60gb). I can't reinstall another partition as I've only 23gb left... when removing the original partition it came up with an error (can't remember exactly..but it failed to verify?
I tried using disk utility to open up the disk size, by streching the corner mark?? and verify it, as per a previous recommended remedy ..it fails
I have re opened osx in R mode and used disk utility it still fails to repair or verify lost space? I have no back up drive as it recently failed...tsk and don't want to lose anything else??
Mavericks, osx 10.9.1 Mac 27in 2010 model
how can i re-create a hidden lion partition after creating a RAID 1 array for Lion Server 10.7.3 My new mac-mini did not come in the array i'd expect it to come with being a server?
View 1 Replies View RelatedI recently installed Lion on my Core 2 Duo Macbook (late 2010 model). Everything seems to have gone smoothly. I also installed a Windows partition with Boot Camp. Windows 7 seems to be working okay, too.I had the impression that Lion installs an emergency backup partition on my hard drive. I had the impression I would see this partition if I started the machine with the option key down (along with the Boot Camp partition). Actually, I could swear I did see the Lion backup partition several times when I started the machine with the option key down. That was several days ago. Recently, when I start with the option key down, I don't see the Lion emergency backup partition. I just see my Macintosh Hard Disk and Windows.Was it my imagination, or has the Lion backup partition disappeared from the optionkey-down startup screen? If so, why? Has something gone wrong?
Info:
MacBook, Mac OS X (10.7.4)
I bought a MacBook that came with Mavericks installed. I want to install Lion on different partition. When I try to boot from the Lion install DVD a "no" symbol comes up, a circle with a slash through it.
What is preventing it from booting? Where is it stored? How do I get rid of it?
Info:
MacBook Pro, OS X Mavericks (10.9.3)
Disk Utility Crashed whilst creating a Partition, and I now have ~100GB missing, which was the amount I had allocated to the new partition.
The new partition didn't get created, and I now have 100GB missing from the Hard drive. I have a 1TB hard drive, and when I go to Disk Utility, it says: Capacity : 999.35 GB (999,345,127,424 Bytes)Available : 586.1 GB (586,103,844,864 Bytes)Used : 310.52 GB (310,524,317,696 Bytes)
Which adds up to about ~900GB.
I tried Repairing Disk in Disk Utility, booting into Recovery Mode and Repairing Disk there, but neither made a difference.
Info:
MacBook Pro (15-inch Mid 2012), OS X Mavericks (10.9.3)
I recently made a clone of my Windows XP Pro SP3 installation (its roughly about 14GB according to Finder/WinClone) so i made a 80GB partition on my 320GB drive and it gives me this error message:
the WinClone came from a 500GB internal drive and ive gotten winclone images to restore to a MBP before but not sure why its giving me this error code, anyway to restore the image to the new partition (which was created with Bootcamp) as i no longer have access to the old machine it was running on.
First some background info. I recently purchased a 1TB hard drive for my 13" MBP, and I am about to do a clean install of OSX 10.6 and Win7 64bit on separate partitions.
And I want to setup the partitions before I install using Disk Utility. The reason for this is because I'm under the assumption that when creating a NTFS partition its better for the disk to be blank so it can put the MFT(Master file table) and MFT Mirror wherever it wants instead of some random spot on the disk (that way disk writes will be faster). The MFT thing was true when converting a FAT32 disk to NTFS. Nativity formatted NTFS disks were always faster then ones converted from FAT32, because the MFT was spread out instead of at the start of the disk.
I'm worried that installing OSX and then using the bootcamp utility will cause the MFT on my NTFS partition to end up in a un-optimal place and disk Reads/Writes will be slower.
Ok, so here's my questions.
1.) Should I be using a GUID Partition Table or Master Boot Record(Remember OSX 10.6 and Win7)?
2.) Should I use Disk Utility to Create a the OSX partition and then leave the second partition as Free Space? / Or should I use a third party utility and make the OSX partition and the NTFS partition at the same time?
3.) If I do create the partitions Manualy, will bootcamp still work correctly?
4.) Should I Use Journaled or Case-Sensitive Journaled on my OSX partition?
I know all of the questions were stupid, but there isn't any info on the web about it.
