I installed windows 7 on a separate partition using Bootcamp.
Thing is, I changed my mind and I want to add more space to this partition. Is there any way of doing this?
Also, now that I have Windows 7 installed. How do I change from one to another? I thought there would be an option at startup but it just goes straight to OSX
I am using Bootcamp trying to install the Windows 7 and it went alright until rebooting and starting to install procedure. The computer cannot read my flash drive and finally ended up with installing failure. Then I tried rebooting several times and suddenly the bootcamp partition (with nothing in it actually) cannot be read.
I came back to OS X and tried to delete the bootcamp partition but after a while failed. Then I cannot see the Bootcamp Partition in Finder. In disk utility it became "Free Space (I'm using Chinese system and it shows "可用空间“ in both name and format)."
Cannot be deleted through the minus button, cannot be formatted, and all the options are grey (cannot be clicked)
In recovery mode (command + R) it remained the same.
I can normally use the other partition in Mac OS X.
How can I delete the unusable partition and regain the space? To combine the two partitions back together is the best choice but HOW?
Info:
MacBook Pro (Retina, 15-inch, Late 2013), OS X Yosemite (10.10.1)
I used bootcamp to create a partition for installing Windows.
Everything worked fine and I still see the Windows partition on Mac OS.
But when I used Disk Management on the Windows and split its partition to 2 new partitions (C: and D: on Windows), they didn't show up on the Mac OS. The Mac OS still showed the Windows partition as one (which is created by bootcamp), not two.
I'm using Vista Ultimate with and Mac OS X 10.5.2.
I am on Snow Leopard, 10.6.2.
Today I created a partition on the wrong drive ( where all my family pictures and videos are ) and now I can't access the drive at all.
I am guessing the files are still there but I am clueless on what to do.
I've been using bootcamp for a while now, and my windows partition has worked great. I mainly use windows on my G5 iMac to play counterstrike (fun as hell) but lately ****'s been ****ing up on my windows side of things. I'm pretty sure it's because I'm out of space on my windows partition, and I want to add more space - without having to completely reinstall bootcamp!! Something's telling me this is the only option, but I don't want to have to put the effort in reinstalling the application.
View 5 Replies View RelatedI'm not really experienced in setting up Bootcamp on Mac, but I have a few Windows games that I want to play; so I'm taking the plunge and installing W7. I am looking at installing:
-Bioshock
-Bioshock 2 (when me order arrives in mid-feb)
-Unreal Tournament 3
-Sims 3 -
So how much space does W7 really need, I have a genuine W7 Ultimate x64 to install (got 8GB DDR3 on my 27" iMac) so there seems to be no point installing x32. Seems I need 20GB just for W7 x64. But how much space to leave for the games I want with a little space to grow?
windows 7 partition is mainly for games like Call of Duty and the upcoming Mass Effect 3. Possibly microsoft office as well. How much space do you think I'll need? Is 200GB enough?
View 3 Replies View RelatedI currently have 2 Partitions. One of them is of the Mac OSX And one of the Windows 7 through Boot Camp. Now i've been wondering if it's possible and how, To add more space to my Windows 7 Boot camp partition.
View 6 Replies View RelatedI really need to free up space on the windows partition of my Mac so that I can install certain software I need in order to complete a project due really soon. What would be the best way to accomplish this (I'd rather not increase the partition w/ a third party app)? I was thinking the best is to eliminate unnecessary files that I am pretty certain were installed as part of the Vista install so that I can recover as much HDD space on the windows partition as possible, but don't know what I can eliminate safely? Can someone please offer some ideas and very basic steps of where to find any of the items you reference?
View 5 Replies View RelatedI've currently got a Windows XP partition and a Mac partition. Thing is, I allocated too little to Windows XP, just about 20gb. I don't want to go through the hassle of installing the whole thing again so is it possible I free up some space in my Mac partition and just use some partition software in Windows to extend it's size?
View 3 Replies View RelatedI'm thinking about installing Windows 7 on my hard drive using Bootcamp. I'd like to know if in the future I decide to remove windows, am I able to remove the partition and revert back to the full hard drive space or not?
View 1 Replies View RelatedI recently got rid of a partition I had made for bootcamp since I never use it, and would rather have the space back. I deleted the partition through disc utility, and then through the partition tab, tried to get back that space by dragging down the tab to restore the space originally set for the partition. When I go to apply this change, it notifies that my hard drive will be re-sized. I accept and then a few minutes later it comes back with the error "Partition failed with the error: Filesystem verify or repair failed" Does anybody know how I can restore this space successfully back into my main hard drive? I've attached some screenshots
View 10 Replies View RelatedTime machine reported an error and couldn't back up, so I ran disk utility on the time machine drive and got this message.
"error: couldn't repair the partition map because a new EFI system partition couldnt be created."
Then I hit verify disk and got the message
"Error: partition map check failed because no slices were found."
Info:
Mac Pro, OS X Mountain Lion (10.8.3)
I have created a partition using Bootcamp of 50GB. In hindsight, I believe I need more space. Is there a way to increase the size now or do I need to go back and re-do the whole process?
View 2 Replies View RelatedI bought my first Macbook Pro 15? and I installed Windows 7 64-bit using bootcamp without any problem. Thereafter, I used Parallels 5 to create a virtual machine for Windows 7 and be able to run Windows 7 within the Snow Leopard OS and be able to move back and forth between the two operating systems. However, Parallels 5 created two virtual machines, one called Boot Camp and one called Windows 7. When I was installing Parallels I chose to create the Windows 7 virtual machine but never asked Parallels to create the Boot Camp virtual machine. Where this other virtual machine is coming from? Am I able to delete it without creating any problem or conflicts? Moreover, I have two shortcut icons on the Mac pointing to either of these two partitions. Similarly I have two windows folders on the right side of the Mac dock. What should I do to have only the Windows 7 virtual machine without creating any problems or conflicts?
View 2 Replies View RelatedBought an OEM version to use with bootcamp. Everything works fine up to the point where it is supposed to let me format the partition that bootcamp created. The XP installation just skips right from when I select the C:yatta-yatta/bootcamp partition and starts installing. So obviously the partition is not bootable... Does anyone know if this is because the OEM version of the OS or something else. I tried to reduce the size of the partition because I read a thread about FAT32 not playing well with disc sizes greater than 32Gb. Still didn't work...
View 2 Replies View RelatedI recently made a clone of my Windows XP Pro SP3 installation (its roughly about 14GB according to Finder/WinClone) so i made a 80GB partition on my 320GB drive and it gives me this error message:
the WinClone came from a 500GB internal drive and ive gotten winclone images to restore to a MBP before but not sure why its giving me this error code, anyway to restore the image to the new partition (which was created with Bootcamp) as i no longer have access to the old machine it was running on.
First some background info. I recently purchased a 1TB hard drive for my 13" MBP, and I am about to do a clean install of OSX 10.6 and Win7 64bit on separate partitions.
And I want to setup the partitions before I install using Disk Utility. The reason for this is because I'm under the assumption that when creating a NTFS partition its better for the disk to be blank so it can put the MFT(Master file table) and MFT Mirror wherever it wants instead of some random spot on the disk (that way disk writes will be faster). The MFT thing was true when converting a FAT32 disk to NTFS. Nativity formatted NTFS disks were always faster then ones converted from FAT32, because the MFT was spread out instead of at the start of the disk.
I'm worried that installing OSX and then using the bootcamp utility will cause the MFT on my NTFS partition to end up in a un-optimal place and disk Reads/Writes will be slower.
Ok, so here's my questions.
1.) Should I be using a GUID Partition Table or Master Boot Record(Remember OSX 10.6 and Win7)?
2.) Should I use Disk Utility to Create a the OSX partition and then leave the second partition as Free Space? / Or should I use a third party utility and make the OSX partition and the NTFS partition at the same time?
3.) If I do create the partitions Manualy, will bootcamp still work correctly?
4.) Should I Use Journaled or Case-Sensitive Journaled on my OSX partition?
I know all of the questions were stupid, but there isn't any info on the web about it.
So my iMac came with a 1TB hard drive and I installed Windows 7 x64 but only gave it some 93GB. I have a two-prong question:
Can I add a third partition to my drive after I partition for BootCamp? My main partition ("Macintosh HD" by default) is over 900GB large and I'd really like to cut that up into 2x450GB, for example, in addition to the 93GB BootCamp partition.
Second, once partitioned, is it possible to resize the BootCamp partition to make it bigger after it has been set up?
Got my first MacBook Pro about 2 months ago and I have been enjoying it to full effect, installing programs such as logic studio and photoshop cs5 on it. Recently, however, I decided that I would like to access some of my windows based programs when I am on the road and don't have my desktop pc with me. So I bought a fresh copy of 32-bit Windows 7 Ultimate and sat at my macbook, put the disc in and then loaded up Boot Camp. I went through the menu options, decided that I wanted a 50GB partition, leaving my Mac OS drive at 182 GB with 83GB to spare. However, when I started partitioning, after about a minute it stopped and this error message appeared: "The startup disk cannot be partitioned or restored to a single partition. The startup disk must be formatted as a single Mac OS Extended (Journaled) volume or already partitioned by Boot Camp Assistant for installing Windows.".
I tried cleaning all my temporary files and deleting some files in my downloads that were quite large and I restarted my machine. The problem persisted. Is there a solution to this problem that does not involve doing all this rubbish with a fresh install of Mac OS? I don't have any method of backup apart from a couple of 4GB flash drives..
I recently installed MacDrive on my Windows Vista X64 partition so that I could access my iTunes Library on my Mac partition. After installing iTunes on my Windows partition and pressing shift while it opened, iTunes asked me for an iTunes library file ending with the extension ".itl". Now, I do not have any files ending with this extension in my iTunes folder on my Mac partition. Is there anything I can do to make iTunes on Windows to read my music library on my Mac partition?
View 5 Replies View RelatedI am dual booting XP Pro and OS X on my NC10. I have XP Pro installed on the main partition with a FAT32 partition for files that can be read by both OSes (see attached image for two views of the partitions). I then installed OS X on an extended partition. Unfortunately, I had another 5GB partition also on that extended partition. I now want to delete the spare 5GB partition and non-destructively reallocate the space for the OS X partition - I want to expand it to be one big partition with my bootable OS X install still on it. Unfortunately, I can't find any way to do this in Partition Magic. Is it possible with GParted/BootItNG/iPartition or any similar software? If so, which and how? The NC10 has no CD drive so solutions that work from OS X or XP or a bootable USB stick would be preferred.
View 3 Replies View Relatedcan we convert the ppt created in mac to windows
Info:
MacBook Pro
I setup a 40gb partition for window's vista. Since vista is such a hog, I only had about 15gb left. Well, I used all but 2 gb on space for games and MsOffice. So I need to give more space to the partition. My specs are as follows: 160gb hard drive. 2GHz intel core 2 duo. 2gb 1067 MHz DDR3. My startup disk is Macintosh HD. give me a detailed set of instructions or the website you may have gotten it from.
View 2 Replies View RelatedI have a 13" MBP with a 250 gb hd, I partitioned the HD 25gb for Windows XP shortly after I bought it. I was unable to install my copy of windows, contacted apple after exhaustive search as to why... Long story short, I now have Vista to install... When I went back to Boot Camp Assistant; partition was gone. Researched... ran disk utility, repaired and erased partition. Bootcamp HD now shows up in desktop, still not in bootcamp assistant. Since I am unable to locate in assistant; would there be any problems with just installing Vista off the install disk by restarting? Any ideas what to do if this is not a good idea (short of restoring)?
View 4 Replies View RelatedIs it possible to sync one's OS X iTunes library across Boot Camp into Windows? I would like to have the same library on both my Windows and OS X partition, and by library I mean having the same ratings and play counts across both partitions in addition to the actual music. If this is possible, how can it be done?
View 3 Replies View RelatedQuick question: I'm cloning/backing up my 250GB boot drive which has all my sys, apps and docs on it. I have a larger 320GB target drive to back up on. But I want to partition it up into 2 partitions. One for the boot clone and the other for other junk. When I go to disk utility it says the Total Capacity of my 250 is 238.1 GB. So, should I partition my target clone partition at say 240 GB (to get more out of the 2nd partition)(or is that inadequate when my source drive gets full up at a later date) or 250 GB or 256 GB (to be really safe)?
I'm using Carbon Copy Cloner and want to do a block level copy
Recently, I was installing Windows 7 on my Bootcamp partition, and the installation was going fine, but I ran out of energy so the installation was interrupted. I boot my Mac OS, opened Bootcamp and erased the partition just to create it again and install Windows once again. However, when I loaded the installation from my DVD, I got an error message saying that a CD/DVD driver was missing, and it found no hard drives even after rescanning my computer. When I chose browse, I was surprised when I saw not 2, but 3 partitions, one with my MAC OS, the new Bootcamp partition, and a drive called X: that was created when the past install got interrupted.
I've tried erasing the partition in bootcamp over and over, but I can't erase it, even though Mac OS tells me my drive now consists of a single volume. Do I need to format my whole drive? Do I need to install OSX? Will I lose all my applications and data? In case you need it, here's some info:
OS X Version 10.6.2
Intel Core 2 Duo 2.66 Macbook Pro 4GB Ram
Windows 7 Ultimate
I have been trying to expand my bootcamp partition and so far I have WinClone'd it, then I merged it into my Mac partition, then I tried to create a new windows partition (but it didn't work), so now I am trying to create a new Mac partition. It failed a few times saying things like not enough space (though there was), and something about available resources. Now it has been going for about an hour, and the progress bar is in the loading mode, where it doesn't show the progress. I'm pretty sure it is hung up, and will go like this forever. How long should it take?
BTW I have a 1st gen uMBP 15"
I partitioned my MacBook Pro into 2 volumes so I could dual boot Mavericks and Yosemite Developer Preview. After testing Yosemite, I found out that it was stable enough to run on my main partition. I installed it on my main partition replacing Mavericks and deleted the second partition which included Yosemite. While deleting, somehow I was left with an empty partition called "Free Space" which I cannot delete.
I am pretty sure the problem isn't related to Yosemite being a developer preview as it could've happened under an previous stable OS. How can I merge my "Free Space" partition with Macintosh HD?
MacBook Pro with Retina display 13-inch Late 2013
2.8GHz Intel Core i7
16GB RAM
Intel Iris graphics
512GB SSD
OS X Yosemite Developer Preview 2
