Windows On Mac :: Bootcamp Or VM Ware Without Dvd?
Aug 17, 2010
I am a really new MAC user. I had a Windows Vista laptop and had purchased the Windows 7 download update for a Windows 7 Professional. However, I only have the .exe file with me that I was able to download from the website. I do not have a DVD. Is there any way that I can use the .exe file for Bootcamp or VMWare? I have paid for the windows 7 OS, I have the .exe file but no DVD. I cheaped out on that. But now, I have a dilemma because my school starts and I need a Windows Environment to run .exe applications for my engineering programs. These .exe files are really small and I am sure it would work fine if I can have VMWare running on my 13" MBP.
So I had Bootcamp installed. I then installed VMware. During setup it automatically detected the Bootcamp partition and things were great. I then deleted Bootcamp for other reasons and have since reinstalled it. I am not sure how to get VM to point at Bootcamp now? It did it automatically last time. I have deleted the physical disk from settings. I just can't figure out how to get back at Bootcamp.
I had downloaded COD 4 on my old white MB with 1 GB RAM and 144 MB VC(intel GMA).So I was told that it will not work on that so I returned it.So my Question is that will it work on VM ware?
I just installed Windows 7 on bootcamp partition, and then installed VM Fushion to point to that partition. So i can either boot into bootcamp or just run windows through vm. Everything is fine.
However, I find that, when i use vm to run Windows, it has access to internet but has no access to any local network devices.
I recently upgraded to a new Intel X-25 80G SSD on my 2007 MBP. While looking at what to move onto the new smaller SSD I noted that VM Ware had my virtual machine partitioned to 20 G. The settings in VM Ware however wouldn't let me shrink it to a smaller size. It said that 20 G was a minimum. I'm only actually using about 10G and would like to free up some more space on the smaller SSD. Does anyone know how I might do this if it is even possible?
when the new MBP refresh happens ill be getting a 17" MBP to replace my current HP laptop, Iv seen Apple say that both VM Fusion and Parallels can be used to run Windows Applications but which is better? as I dont see much difference just by looking at screenshots why do they advertise 2?
Used migration assistant to move my Blackbook apps and settings to the Air using a Time Machine backup from my Time Capsule - wirelessly. Two hours later (not terrible) and I'm using my Air with all my apps and setting - fantastic.
Question: My Blackbook also has a Bootcamp partition running Windows - is there a way to take that image and migrate it to my MB Air? I'd rather not have to purchase the Superdrive and re-install/setup the Windows OS on my Air....
I have a Mac Book Pro running VMWare Fusion and Vista loaded. I recently purchased the USB modem from Apple with hopes of having Vista recognize it and be able to use dial-up. Yes I know why dial-up, I am a Technician who has to remotely connect to customer sites for maintenance-changes etc.. Vista will not recognize the modem nor is there any driver support through Apple for this scenario. Any suggestions or tricks would be great? Oh yeah, if i get this to work my company will deploy all Mac products .
I want to try out Windows 7. During this process though I deleted my winXP partition. When I went to create a new BootCamp partition in The BootCamp SetUp Assisstant, it failed to create the partition on my harddrive.
I was greeted with the error, "BootCamp SetUp assistant failed to yada yada yada, please backup and reformat your harddrive."
So my question is do I really have to reinstall Mac OS X? (I backup with TimeMachine so it won't be a big deal but still thats a very long process.) Do you guys have any tips or anything to get Mac OS X to partition my main HDD?
Maybe I'm just over thinking this, but Apple never posted a KB article about how to upgrade an existing bootcamp partition with the new snow leopard bootcamp 3.0 drivers. I'm assuming if you already have bootcamp 2.1 you boot up in boot camp and then insert the snow leopard disc in order to upgrade the drivers to 3.0 correct? Or do I have to erase my stupid bootcamp partition and reinstall it all over again using the new leopard boot camp assistant in order to get to 3.0?
I use VM Ware Fusion on my Mac Book Pro.When I start up an image with Windows 7 or Windows Server 2008R2, my cpu gets very hot.Temperature can go up to 90 degrees celsius for a brief moment, but usually i stays stable around 60 degrees celsius. I also use smFanControl, to make sure my fans are cooling a bit harder when I use VM Ware Fusion.
I have the next questions: Is the temparature rise normal?Can it harm my laptop (cpu)?Can smFancontrol damage my fans, while running harder for about 8 hours like that?Or is ther something wrong with my Mac, because during temerature rise to for instance 90 degrees, the cpu is used for like 30-40 percent?
Info: MacBook Pro, Mac OS X (10.7.4), Harddisc has now tree partitions
I've just bought a copy of windows 7. Just wondering if i install it via bootcamp now can i update bootcamp in a few weeks when apple releases windows 7 support or will i have to reinstall windows 7 when that happens ?
A question about windows 7 and a Mac pro 3.1 edition 2008. I have installed windows 7 and all is fine and dandy everything works, except in the bottom right hand corner there the error flag showing on the tool bar.
This is the error.
Apple Memory Controller GPE event is not compatible with windows 7.
i'm using macosx 10.6.4 and bootcamp assistant 3.1
now here is the problem my windows 7 is infected with virus (thats why windows suck big time) and i need to reformat my windows 7 and reinstall a new windows 7.
how am i supposed to do it? insert the installation disk and do like how we initially installed windows 7? just format the partition and reinstall again? i just want to make sure so i ask before doing anything.
or can i do this? i use winclone to restore? any1 have any idea? i'm new to all this i dont know how to do it. i have backup using winclone but how do i do it? do i still need to format then only use winclone?
I've tried re-installing and updating every possible graphics related driver for Windows 7 i cannot for love or toffee get the bloody thing to even recognize my display. I am using a 26" tv as an external display, it works on OS X (very easily), windows XP (also very easily) and even Vista (also easily) and connecting through a DVI/HDMI connector. Why not windows 7? I've scoured the web for answers but can't find anything. Is anyone at least in the same boat as me? I really need this solved soon
Does anyone know or have the same problem where pressing the F7, F8, F9 keys (which are previous, stop/pause, and forward) doesn't work in iTunes unless iTunes is the "active" window? I know that in OS X that if i pressed those buttons, it would do it even if I was in another application, but in the Windows 7 version it won't do it if another application is "active." Also, the same applies to the Apple Remote.
If you set up boot camp with run windows and then also want to run windows with parallel, do you need two licenses of Windows to do this? Or can both programs access the same instance of Windows?
after i get to the windows loading screen my mac just throws out a consistent high pitched sound and shows a black screen, i can only get into bootcamp windows when i unplug the computer and start it up with the running windows normally option. is this a virus?
So I am trying to open up my bootcamp partition (running windows 7) in VMWare and I get this error message: Cannot open the disk '/Users/brandonquirarte/Library/Application Support/VMware Fusion/Virtual Machines/Boot Camp/%2Fdev%2Fdisk0/Boot Camp partition.vmwarevm/Boot Camp partition.vmdk' or one of the snapshot disks it depends on. It was working just fine before the upgrade to Snow Leopard but I am not sure if that has anything to do with it. I had to reinstall Windows 7 after I tried installing the Bootcamp 3.0 drivers so that may be more of the issue. I didn't test to see if would work still when I upgraded to Snow Leopard.
Last night I installed Windows Vista to run a game on here, but I got several issues. I already installed the drivers from the Snow Leopard DVD, but the problems still persist.
The issues are:
1. Sound is very very low and uneven. I have the volume all the way maxed, but the loudest it can go is less than half than the potential volume in Snow Leopard.
2. Headphones don't work. I've tried like 3 pairs of headphones and none of them work. When I plug them in, the sound still comes from the left speaker (I can barely hear the right speaker) on the laptop and not on the headphones. Also, the headphone jack is emitting a red light out of it.
3. The lights on the keyboard won't shut off. I used the F5 key to turn off the keyboard backlighting, and while it goes very dim they won't shut off.
I already tried the suggestions on this thread but none of those fixes work. I need help! Especially with the sound! Anything at all would be greatly appreciated.
I'm running a MacBook Pro 13" from June 2009, 2.26GHz Intel, 4GB of RAM, and an Nvidia GeForce 9400M. I instlled a 64bit version of Windows Vista (OEM).
I have installed Windows 7 on a Bootcamp partition and use VM Fusion as well, I am trying to get my Windows 7 desktop onto my Plasma TV when I have only Windows 7 booted.
I have a mini displayport to DVI adapter (not worried about sound right now) but when boot into Windows I cannot find the TV as a output setting.
It used to be with my old PC I would see the TV as a possible output and I could chose either Dualscreens or simply set the Plasma as the main display.
Could someone please help me achieve this with my iMac? Am I missing a driver or just missing a setting?
Basically, I created a BC partition for my W7, however, I only gave it 32gigs of space (I only wanted to use it for gaming).However, now I want to install Autodesk 3D Studio Max 2010 on W7, however I don't have enough space on my BC partition to do that...I've researched enough to know that I will need to use one of the following programs:I've read up on all the programs and done some research on them. Ive noticed most people are having problems with all of these programs when trying to backup a W7 image whilst on Snow Leapord (Mac OS x 10.6, which I am running)I know that is the function of the 3 applications above... But to my knowledge... In theory - I should be able to just backup my W7 using a reliable backup program (Can someone recommend any?) and then delete the existing BootCamp partition, create a new one of 100gig and then just load up the backed up image for Windows 7...
I have a 2010 15" MacBook Pro 2.4 i5 that I am trying to install Windows 7 on using BootCamp. I have installed a partition using BootCamp of 45GB but once it prompts me to insert the Windows disk, I insert it but after a few seconds the machine ejects the disk without ever mounting or seemingly recognizing the disk.
I am trying to install Windows 7 Ultimate 64bit from a disk.
Can anyone offer any insight or help me figure out what the problem is? I have already tried rebooting and that doesn't work.
So I thought I was a know it all and thought I could remove my Windows partition without reading the instructions. Typically one would do the following: 1. In Mac OS X, quit all open applications and log out any other users on your computer. 2. Open Boot Camp Assistant, in the Utilities folder in the Applications folder. 3. Select "Restore the startup disk to a single volume" and then click Continue.
However, I messed it up. Instead of going through Bootcamp assistant, I went through Disk Utility and "erased" the Bootcamp volume. Now I am not sure where I at? I erased it, but you can still see the Bootcamp volume listed. And now when O try to use Bootcamp assistant to remove the partition I get the following: The startup disk cannot be partitioned or restored to a single partition. The startup disk must be formatted as a single Mac OS extended (journaled) volume or already partitioned by boot camp assistant for installing windows. I want to reinstall a Windows, but want to start fresh.
my parents iMac 20" Core Duo is having issues. After bootcamp restarts the system I get an error on start up, a folder with a question mark shows up aswell as that prohibition logo How can I install Windows 7 on that machine?
you cant use a windows xp sp1 disk to install windows xp onto your mac using bootcamp.What i wanted to know is if i partition my HD then format it to a recognizable format for windows installation disks, would i be able to install windows xp sp1 that way?or would the same principle apply as bootcamp and sp1 versions of xp are incapable of being installed on macs?
I occasionally get the BSOD sometimes on the Windows XP side of things in Boot Camp. I always use a mouse on the Windows side, as the trackpad is very glitchy and buggy. Sometimes, when I use the mouse for a prolonged period of time, I accidently touch the trackpad forgetting all of the sudden that i had the mouse (or i use it to scroll down) and the whole thing blue screens on me. It has happened 8 times already, each time blue screening after touching the mouse. I don't know why, but I find out that the mouse drivers are the one that is messing up my Windows XP SP3.
