MacBook Pro :: VM Ware Fusion Or Parallells Used To Run Windows Applications?
Jan 13, 2010
when the new MBP refresh happens ill be getting a 17" MBP to replace my current HP laptop, Iv seen Apple say that both VM Fusion and Parallels can be used to run Windows Applications but which is better? as I dont see much difference just by looking at screenshots why do they advertise 2?
View 24 Replies
ADVERTISEMENT
May 17, 2012
I use VM Ware Fusion on my Mac Book Pro.When I start up an image with Windows 7 or Windows Server 2008R2, my cpu gets very hot.Temperature can go up to 90 degrees celsius for a brief moment, but usually i stays stable around 60 degrees celsius. I also use smFanControl, to make sure my fans are cooling a bit harder when I use VM Ware Fusion.
I have the next questions: Is the temparature rise normal?Can it harm my laptop (cpu)?Can smFancontrol damage my fans, while running harder for about 8 hours like that?Or is ther something wrong with my Mac, because during temerature rise to for instance 90 degrees, the cpu is used for like 30-40 percent?
Info:
MacBook Pro, Mac OS X (10.7.4), Harddisc has now tree partitions
View 9 Replies
View Related
Oct 20, 2009
I had downloaded COD 4 on my old white MB with 1 GB RAM and 144 MB VC(intel GMA).So I was told that it will not work on that so I returned it.So my Question is that will it work on VM ware?
View 2 Replies
View Related
Aug 17, 2010
I am a really new MAC user. I had a Windows Vista laptop and had purchased the Windows 7 download update for a Windows 7 Professional. However, I only have the .exe file with me that I was able to download from the website. I do not have a DVD. Is there any way that I can use the .exe file for Bootcamp or VMWare? I have paid for the windows 7 OS, I have the .exe file but no DVD. I cheaped out on that. But now, I have a dilemma because my school starts and I need a Windows Environment to run .exe applications for my engineering programs. These .exe files are really small and I am sure it would work fine if I can have VMWare running on my 13" MBP.
View 1 Replies
View Related
Nov 4, 2010
I just installed Windows 7 on bootcamp partition, and then installed VM Fushion to point to that partition. So i can either boot into bootcamp or just run windows through vm. Everything is fine.
However, I find that, when i use vm to run Windows, it has access to internet but has no access to any local network devices.
View 2 Replies
View Related
Jun 11, 2010
I recently upgraded to a new Intel X-25 80G SSD on my 2007 MBP. While looking at what to move onto the new smaller SSD I noted that VM Ware had my virtual machine partitioned to 20 G. The settings in VM Ware however wouldn't let me shrink it to a smaller size. It said that 20 G was a minimum. I'm only actually using about 10G and would like to free up some more space on the smaller SSD. Does anyone know how I might do this if it is even possible?
View 1 Replies
View Related
Aug 31, 2010
So I had Bootcamp installed. I then installed VMware. During setup it automatically detected the Bootcamp partition and things were great. I then deleted Bootcamp for other reasons and have since reinstalled it. I am not sure how to get VM to point at Bootcamp now? It did it automatically last time. I have deleted the physical disk from settings. I just can't figure out how to get back at Bootcamp.
View 6 Replies
View Related
Jul 13, 2009
When I boot Fusion with MacAffee I get a message that there is an updated version of Fusion is ready for download. When I go to the site I'm offered a choice of just Fusion or Fusion with MacAffee. Since the boot message only talks about Fusion should I do the only Fusion download. Or should I get the combined one?
View 1 Replies
View Related
Oct 31, 2009
Anyone tried to boot the Windows 7 XP Mode withi Parallels or VM Ware Fusion? Would be interesting to know if that works?
View 6 Replies
View Related
Feb 25, 2010
I am having trouble booting up my windows 7 bootcamp, whenever i try to bootup it would give me some screen right after the windows logo and it'll say to repair or somthing, is this a common problem?
View 3 Replies
View Related
Sep 3, 2010
I just uninstalled VMware Fusion from my MBP. However, I don't seem to see that the 40GB I dedicated to the Windows 7 I installed is freed. Please, how do I do that? I need the 40GB to make my already slow 160GB 13'' MBP faster!
View 2 Replies
View Related
Apr 11, 2010
3.06 ghz Imac
4 GIGS 800mhz ram
8800 GS
I want to play games like portal, etc in full detail what are the best setting in vm ware (core and ram wise) to do so (or attempt to)?
View 1 Replies
View Related
Sep 28, 2008
I made an image of my Windows XP laptop drive using Macrium. I can see the image file there on one of my Mac Pro's internal drives, but Im not able to select in Fusion.. Is there a way to make a Fusion VM from this image? If not, how do I go about creating a VM from my laptops's HD? I'm using Fusion 2.6.
View 9 Replies
View Related
May 13, 2008
I do NOT have the superdrive and would like to install windows XP pro on my MBA with VMware Fusion. I've tried making .dmg, .iso, & .cdr images of the windows XP disc but i'm having NO luck with Fusion recognizing the disc image. When I create the new Virtual Machine I select "use disc image" and point to the appropriate disc image file. I keep getting a "no bootable device" error from fusion.
Can somebody who has successfully installed windows on an MBA without using a superdrive give me the step by step instructions you used...I'm getting pretty annoyed at this point.
View 15 Replies
View Related
Nov 7, 2009
I am tempted to purchase 2nd hand 13.3" MacBook Pro 2.26GHz, 2gb ram, 160gb hdd.
I have a need to run windows as a virtual machine for some occasional .NET development (which I am studying)
I have a couple of questions
What is the impact of battery life running a VM? I intended to run it in Unity mode and only have open .net tools such as visual web developer.
Also, does anybody know the performance of windows 7 in the new Fusion version? (What's aero like?)
Would the performance of an XP vm be better?
View 3 Replies
View Related
Jun 13, 2010
Not sure if I should get vmfusion or parallels to run windows 7 on.
They both seem to be as good so I guess I am shallow enough to go for the best looking.
I will trial both with windows 7.
Can I do that with a single license copy of W7?
BTW I read very thread on ag v glossy and small text problems with hi res and worried for weeks!
As a 63 yr old with glasses for short sightedness (and a short temper) I am delighted with my 15 inch hi-res ag!
View 2 Replies
View Related
Oct 24, 2009
Last night I installed VMWare Fusion and Windows 7 on my Unibody MBP running SL. When I use Fusion, my computer slows to a crawl. I spent a few hours getting Windows set up and installing software last night.
I would like to try using Boot Camp instead, but do not want to lose all of the software and files that I have installed. Is it possible to set up Boot Camp, and keep the same Windows setup?
View 8 Replies
View Related
Jan 14, 2009
I installed Windows 7 beta in VMWare Fusion on my new aluminum macbook. It's pretty cool how seamlessly it works within the OS and spaces.
But what do you guys use your virtual machines for? How often do you have it open? What OS do you use?
View 17 Replies
View Related
May 7, 2009
I'm having pretty bad difficulties with Windows 7 and Parallels Desktop. I know it's not supported yet, but some folk have it working. I can boot up, but I can't install Parallels Tools. I changed the Configuration to "Windows 2008 Server" like someone suggested in another forum, but fails to boot up.
Seems like VMWare are offering a better helping hand than Parallels Desktop - and while it is not supported yet by them, they say that if you use Windows 2008 Server Config everything works apart from sound.
So am I best giving it a bash with VMWare's Fusion? 30-day trial for free. But I'd rather try get Parallels working since I paid for it.
View 9 Replies
View Related
Nov 28, 2009
i just installed windows 7 on my mac last night over my vista partition, but now my avg firewall was disabled to i had to reinstall avg, got that fixed, but my next problem is vmware fusion. it just doesnt work, it boots into windows 7 but then i get the blue error screen saying something like windows has shutdown due to a blah blah blah...anyway i need this fixed right away, do u guys know how to fix it or know any alternatives besides parallels?
View 2 Replies
View Related
Jul 7, 2009
1) what puts more ware on the machine (hdd...) to reboot, or sleeping, does sleeping put the same amout of ware as rebooting.
2) what puts on more ware: Sleeping or on
View 8 Replies
View Related
Jul 9, 2009
Before you ask, I had found some old games a few months ago that I wanted to play for nostalgia sake, so I made some Windows 95 and 98 virtual machines. It was pretty easy actually, since I just used Disk Utility to create images of the install discs. VMWare had a nice guide on their site that helped me get networking setup properly also.
But then I got to thinking, it'd be pretty fun to try and get Windows 3.1 up and running as well. I was able to make images of some MS-DOS 6.22 install disks and got that installed just fine. My problem actually comes when trying to install Windows itself. I was able to get the install files from 2 different sources. The first was just a folder of ALL the install files from 6 different disks, and the second was 7 different ZIP files from 7 different disks. I tried creating a single image from the first source, and 7 different images from the 7 unzipped folders from the second source, but on both attempts I'm unable to access the A: drive in DOS to start the setup. It gives me an error message about reading from the drive, followed by the standard "Abort, Retry, Fail?"
Has anybody else tried to get a Windows 3.1 virtual machine up and running and come across this problem? I even tried Googling for the exact lists of files contained on the 6 disks from my first source in order to try and split those up and make the necessary images, but unsuccessfully.
View 23 Replies
View Related
Jul 20, 2009
Is it possible or do I have to install windows 7 through bootcamp for the xp virtualization to work?
View 6 Replies
View Related
Oct 4, 2009
I don't know what happened, but since I did the update from a couple days ago, my Windows 7 no longer boots. I really don't want to rebuild my 7 image since it's pretty setup. I do have previous Time Machine copies, but I wanted to visit here for some possible solutions before I go thru it the hard way.
View 5 Replies
View Related
Sep 14, 2010
I currently run Fusion on my iMac but I really would like the try the new version of Parallels that came out this week.
Will I mess anything up by installing the demo version while still having Fusion installed? Of course I wouldn't run both at the same time, just have both installed.
View 2 Replies
View Related
Nov 11, 2010
I read that for gaming, Bootcamp is the way to go, but for other general Windows use, Parallels or Fusion is the way to go.
But for me, I am planning to play games - hence Bootcamp - as well as use Parallels/Fusion for general use, namely to use Microsoft Office Onenote (an unbeatable note-taking software that needs a Mac version yesterday).
Is this even possible and how much memory will the additional parallels take (I'm planning a 40gb bootcamp partition btw on a 250gb hard drive)?
View 7 Replies
View Related
Dec 2, 2010
I have an iMac 3.06 with 4G. The machine runs great and can't believe how nice it runs Windows 7 x64.The only reason I have Windows installed is for Quicken 2010. The odd behavior I'm experiencing is running the Quicken update to automatically download your Quicken portforlio, bank txns, and stocksOn Windows, this updates takes less than 1 minutes. However, on the Mac side is runs for several minutes. The weird thing is the progress meter for each one of the 3 update steps acts like it's get suspended. After 5 or 10 minutes I will close the update window even though it says it's not completed, reopen it and everything is where is last was, but indicates updates are complete.
View 9 Replies
View Related
Dec 17, 2007
how to change the MAC address of the virtual machine under Fusion? I want WinXP installed on my virtual machine to have the same address (set by me) every time it is run.
View 7 Replies
View Related
Apr 1, 2008
Does anyone know how to use the function keys while in Fusion? I'm using Autocad and need functionality of them while using it within Fusion, but they activate OS X functions. This, and enabling "pan" with the middle mouse button, rather than dashboard, seem to be the last two hurdles before I can fully use the Mac for my work.
View 5 Replies
View Related
Jan 23, 2009
I have set up a Windows XP virtual machine on my MacPro but I want to also get it into Bootcamp so i can try playing some of my PC Games. Is there anyway I can keep the files/settings I have with my Virtual Machine, or do I basically have to start from scratch? and then, if i can do something here, how?
View 4 Replies
View Related