Software :: Upgrading PowerPC Based Macs From OS X 10.4.11 To 10.5
Oct 13, 2009
I'm basically in the same boat as this person in that I need to upgrade from OS X 10.4.11 to 10.5. In my case, I need to upgrade a Mac-mini and two iMacs.
I'm scouring the web for legal copies of OS X 10.5 I can purchase and I've been finding upgrade DVDs being sold in addition to full install DVDs. Both sets of DVDs are official Apple DVDs.
My question: could I use an 10.5 upgrade DVD to do the upgrade or must I use a 10.5 full install DVD? I do realize there is a difference between a 10.5 update DVD vs an upgrade DVD and I'm asking about a 10.5 upgrade DVD..
macbook 1,1 efi and smc up to date, battery not being charged, up to today magsafe led flashed amber green, now solid green but menu bar says battery not charging?
Info: MacBook, Mac OS X (10.5.8), 1tb HDD, 1 gb memory.
my macbook pro (late 2011) is powering down without warning. I'll be writing an email and w/o warning, it's off. I'm unable to turn it back on with the power button unless i hold it down for a slow count to 10. Fyi - machine is 100% charged when this happens. Two days ago, I did SMC and PRC resets with Apple Care. I needed to do both of these again yesterday on my own.
I have a Macbook Pro 13 inch purchased refurbished thru the apple website. Is shows as early 2011 version. Boot Rom MBP81.0047.B27 It came installed with Lion. I have repeated crashes. I want to run hardware test. It will not load from internet and no CD/DVD was provided. If I hold down the D key before startup it eventualy comes up with the normal log in screen.
Info: MacBook Pro (13-inch Early 2011), Mac OS X (10.7.4)
I have a 2006 Intel Macbook with a crashed hard drive. I'm kinda broke right now, so instead of buying a new hard drive I loaded ubuntu 10.4 onto an external hard drive (USB) and tried to boot the macbook from it. (Failed). I hold down option to launch Startup Manager and all it shows me is a cursor (no drives). I know the external drive is bootable because I a) booted the laptop from a LiveCD and used it to create the hard drive and b) I booted a Dell from the external. I've tried moving the drive to a different USB port, but no chips. I don't have anything else connected to the computer.
my question is: Can I boot the macbook from the external hard drive if the internal hard drive is shot?
Apple may be laying the foundation for TRIM support in future Macs, a technology that should allow their solid state flash drives to maintain optimal performance throughout the life span of the systems.The Mac maker's most recent 13-inch MacBook Pros display an option for TRIM support in their system profilers on SSD-equipped models, one which isn't present in either the second-generation unibody 15-inch MacBook Pros or the latest refresh sporting Intel's Core i5 and Core i7 processors.TRIM is essentially a command that lets operating systems like Mac OS X inform SSDs of which blocks of pre-written data are no longer in use, allowing them to be wiped clean internally.
I've been going on two weeks now without my 13-inch mid-2009 mbp...i installed the 10.7.3. lion update but after it was completed i powered down my laptop and started it up only to find a blinking folder with a question mark...the logic board was replaced in mid-2010...i'm able to boot of an external drive running lion 10.7.3...i replaced the wd hdd with a new one & now it doesn't recognize it in disk utilities...i've replaced the ram with new ram & changed the hdd cable...i took it to apple & they said it should be either the cable or the hdd...i tested the hdd in another enclosure & it's running fine..
Info: MacBook Pro (13-inch Mid 2009), Mac OS X (10.7.3)
I'm sure this has been asked before so please forgive me. I have found arguments that say just use Migration assistant to some saying I need to cherry-pick certain items.
A friend has a G4, can that laptop run OS X 10.whatever? I know nothing about the Apple laptops...does OS X require an Intel based chip? (I assume a g$ is NOT Intel based.)
I've got two Macs: one Tiger (iLife '06), and one Leopard (iLife '08) and I would like to upgrade both to Snow Leopard. I'm in the UK.I need help finding the best price/capability compromiseI have looked at the prices for doing this and come up with the following options:Most expensive optionBuy the 5-user Mac Box Set (Including OS X Snow Leopard, iLife 09, iWork 09) for 179This way I've got both machines running the latest everything.Next OptionBuy the Single User Leopard box set (including iLife/iWork 09) to upgrade the Mini to Leopard (?108.34) then buy the Snow Leopard family upgrade box to upgrade both machines to Snow Leopard (?39), total ?147.34. This way I have iLife/iWork 09 on the MacMini but not the MacBook.
Cheapest OptionBuy the Single User Leopard disc to upgrade the Mini to Leopard (?68.99) then buy the Snow Leopard family upgrade box to upgrade both machines to Snow Leopard (?39), total ?107.99.
My son's G3 iMac with 8mb ATI Rage is dead slow on flash-based sites like Club Penguin. Would an eMac with it's G4 and 32mb Radeon be a good step up or is this still too old of a machine for these cutting edge web sites?
I can use an Atom 330 Dual Core based machine as my home server?. I use it to live encode videos through AirVideo to stream to my iPad.. but the encoding is choppy and laggy. I have the chance to buy a 1.8 dual G5 PowerMac - would this be more powerful and encode video faster than the atom??
They threw away some 512MB memory sticks today (off old useless machines they're pulling apart for computer classes) and I'm wondering which Macs can use them? I'm aware that they won't work on anything past G4s and not G3s, but which models?
I have been out of mac for quite a bit(1ghz g4 pb) and I have never owned a mac desktop, but recently I got a dual 533 DA powermac, and I've been looking for giving it a bit more of everything. So I grabbed 1.5gb of sd-133 and a evga 7800gs that I have flashed. I also picked up a dual 800mhz g4 from a QS, my question is, do I need to do the 12v 4th post mod due to the fact I'm already using a dual cpu? I was unsure as most of the posts I've found deal with adding a DP daughter card to single G4 macs. Also if that is the case does any one know of a good picture of the 12v mod , the one I found was very small and I couldn't quite see what he used to attach the 12v line to the post.
Documentation included with copies of Mac OS X 10.6 Snow Leopard distributed during Apple's developer conference this week confirm that the next-generation operating system does not presently support Macs with PowerPC processors. LogicielMac.com has published a screen capture of the PDF-based requirements document included on the Snow Leopard disc that provides a rundown of the system's requirements.
The documentation states that in order to install Snow Leopard, developers must have a Mac computer with "an Intel processor" and at least 512MB of RAM, though additional memory is recommended for development purposes. The findings confirm an AppleInsider report from last September, which cited people familiar with the ongoing development of Leopard as saying that Mac OS X 10.6 would in all likelihood exclude support for PowerPC processors. According to the Snow Leopard documentation, the new system will also require an Apple-supplied video card, 9GB of hard disk space, and either an internal, external or shared DVD drive. [ View this article at AppleInsider.com ]
Apple is slowly dropping PowerPC compatibility with its latest software releases as evidenced by a major new feature of iLife '09 that will function only on Intel-based Macs.
Ars Technica points out that GarageBand's Learn to Play, a new section within the music-making software that serves as a digital instructor for a user learning a new instrument, is not officially supported for Macs still running on PowerPC processors.
System requirements found on the Apple Store website say, in fine print, "GarageBand Learn to Play requires an Intel-based Mac with a dual-core processor or better."
When iLife '09 was first announced at last month's Macworld, the system requirements included "a Power PC G5 or 867 MHz or faster PowerPC G4" without mentioning any incompatible individual features.
Learn to Play also offers Artist Lessons from a Lesson Store built into GarageBand where artists teach fans how to play their hit songs on certain instruments for $4.99 each lesson.
Chief executive Steve Jobs confirmed the switch from PowerPC to Intel in June 2005, targeting the end of 2007 for the transition to be completed.
Mac OS X Leopard excluded slower PowerPC-based Macs with a cutoff set at 800 MHz G4 or faster.
Official documentation from Apple gives clues that PowerPC Macs very well may be left out completely when Mac OS X 10.6 Snow Leopard is released sometime during the first half of this year. Developer copies distributed at WWDC last year included a requirements PDF that listed "an Intel processor" as the minimum necessary to run the software.
Adding further weight to that possibility, people familiar with the ongoing development of Leopard have previously told AppleInsider that Snow Leopard would in all likelihood exclude support for PowerPC processors.[ View this article at [URL] ]
I recently replaced my 12" PowerBook G4's 60 gig HDD (due to failure) with a 80 gig HDD (TOSHIBA MK8026GAX).
I'm now running out of space and am looking to upgrade to a 100-120 gig HDD (and put my existing TOSHIBA MK8026GAX HDD in an external FireWire caddy).
After research, my two options are: 1 - TOSHIBA MK1234GAX, 2 - TOSHIBA MK1032GAX. Both offer good performance in my price range.
Option 1 is a 120 gig HDD with a 8MB buffer. Option 2 is a 100 gig HDD with a 16 MB buffer.
Obviously I would like as much space as possible with the best performance. Would I see a large drop in performance going from a 16 MB buffer to an 8MB??
All the drives have similar specs (seek times, etc), besides the buffer being smaller on the 120 gig HDD.
Can I upgrade my G5 dual 2.0 with intel chips? I am really feeling hurt, that I bought a MAC and then Apple "upgrades" there Mac with intel chips. And what hurts eben more is the games now coming out are only for Intel Mac's only. I am not a hard core gamer... but I would still like to play a couple of the new games coming out.
I have a G4 powermac 400 mhz with os panther 10.3.9 installed Can this G4 be upgraded to Tiger and if so which version.There seems to be many versions of tiger ie some say amd or intel etc If i can upgrade which version should i look for
Looking to buy a used G5. Dude said he upgraded a G5 1.8 to a Dual 2.0... Is that even possible and if so what limitations or problems could the machine have. Said he replaced the whole motherboard.
I recently bought a used powerbook G4 and I notice it doesnt have any USB 2.0 ports just the 1.1 ports is there any way to upgrade the USB ports on the powerbook G4? I have the 867MHZ 1G RAM and a 100GB HD.
I have an opportunity to get a Mini G4 for $200. It is an older version with 256 RAM and a 40gig HD running Tiger. Can I upgrade to 1gb of RAM and a larger HD and then upload Leopard on it or is it even worth it?
I'm working on upgrading my 400MHz Sawtooth. I'd like to take it to the maximum 2 GB of RAM, but since I already made the mistake of buying high density instead of low, I thought I'd ask before making another purchase.
As far as I know, these are the right specs for my machine:
I've scoured the internet and haven't come across a definite answer yet for why I would not be able to put 2x2GB ram modules into my Rev A G5 iMac. I've looked at the developer architecture guide from apple and it says nothing as to why a larger module won't work. [URL]. I guess I am just looking to understand where the limitation exists, is it hardware not being able to address the extra RAM or something else. I've also been unable to dig up much more info on the U3L memory bus to see if thats where the problem might be. I'm thinking that at the time 2gb modules were uncommon or not made so there was no reason to include them, but now its only a little more than the 1gb ones.
