Software :: Isight Stopped Working?
Oct 7, 2008
I've had a Santa Rosa MBP for more than a year now and recently, after working intermittently, the iSight stopped working. It doesn't show up in the System Profiler nor in Boot Camp. After extensive research, I've done the following:
- Reset the SMC
- Zap the PRAM and NVRAM
- Reboot in Safe Mode
- Remove the battery and unplug for 2 min
- Checked iSight physical connection on bezel
I've tried everything I could. Now I'm wondering if it's the logic board that is causing this problematic iSight. And if so, will the logic board continue to fail until it's obsolete? What other symptoms are there of a failing logic board (other than display issues)?
View 1 Replies
ADVERTISEMENT
Sep 7, 2014
The camera had been working fine with FaceTime, Photo Booth and Skype under 10.9.4 and then something happened. I run FaceTime and the camera screen comes up, but it's black with no sidebar. I had this happen once before when the serial number hadn't been put back after they replaced the motherboard. It's back in now and was working fine. I did have to install Google hangouts plug in, but FaceTime was working fine after that and I've since uninstalled it after FaceTime stopped working and it still doesn't work.
I did have AirParrot and SoundFlower installed which the camera worked with, but uninstalled them as I saw something about a possible problem. I've reset SMU and PRAM, nothing. he mac sees the camera as being there so it shouldn't be a camera problem, but the apps while seeing the camera aren't getting any input [and no it's not blocked. ]
Info:
iMac (24-inch Mid 2007), OS X Mavericks (10.9.4), 2.4GHz Core Duo/4Gb Ram/320 HD
View 5 Replies
View Related
Feb 3, 2009
this morning my iSight was working...and now, a few hours later it is not. is there anywhere i can go to look at this? i tried looking in the system profiler and didn't find anything.
View 1 Replies
View Related
May 13, 2009
I installed 10.5.7 yesterday. Immediately after the installation was complete, my Apple bluetooth keyboard stopped working. Went into Bluetooth system settings, and it said that there was no bluetooth hardware found... (it's built into the machine!!)...
Also, every time I start iTunes, it gives some weird error about Adobe Flash player. I'm not at home now so I don't have the exact wording of the error with me, sorry...
View 7 Replies
View Related
Jun 20, 2012
Quicklook has stopped workingon my MacBook Pro OS 10.6.8. Pressing the space bar on a file yields nothing. Is there a way to update or reset it so it starts working again?
Info:
MacBook Pro (17-inch Mid 2009), Mac OS X (10.6.8)
View 5 Replies
View Related
Mar 7, 2009
during SW to my mini-mac wireless key board the keyboard stop responding. now i have left without an ability to work with my wireless keyboard. is there any why to reset the keyboard to default setting so it will come to live again..
View 3 Replies
View Related
May 20, 2009
When i open photobooth, all i get is the camera logo with a line going thru it... When i open ichat, it says no camera is attached... There is no green light, in system profiler under USB TREE, the isight is not even recognized....
View 2 Replies
View Related
May 23, 2012
i have OS X 10.7.4 installed.. and isight will not work with any application i try (skype, facetime, photobooth. i have tried all the different ways of people doing it online, but none of which have worked.
Info:
isight, Mac OS X (10.7.4)
View 5 Replies
View Related
Nov 13, 2010
I have had my macbook pro 10.6.5 for over 2 years and have never had this problem. But this morning I tried to use my webcam with flash player online and it wouldn't work. I have spent about 2 hours reinstalling browsers, flash player and repairing permissions in disk utility but still no video.
The iSight does work in Photobooth and iMovie but for some reason when I select it in the Adobe Flash Player Settings nothing happens. The green light doesn't even go on.
Does anyone have any ideas of what I can try next?
I am studying abroad in France this semester so do not have my OS installation disks with me. I do have a time machine backup though
View 10 Replies
View Related
Jun 25, 2007
the isight camera on my macbook pro isn't working. when i open up Photo Booth, it displays green.
View 8 Replies
View Related
Jun 5, 2006
Using a friends MacBook, but the iSight camera doesn't show anything when using Photobooth.
View 17 Replies
View Related
Jul 5, 2009
I was wondering what cause my isight camera to quit working?
View 1 Replies
View Related
Aug 26, 2009
So I recently bought a refurbished macbook pro off apple and for some reason the isight camera is not working efficiently. Whenever I'm video chatting with my friends on ichat, the video window just automatically shuts off. Whenever I use photo booth the camera keeps shutting on and off giving me a message camera is not connected. I went to the apple store and they replaced my camera but still this issue keeps happening. I did an archival install of osx and nothing helped. I whipped the hard drive and did an install of osx and that still didnt help. What should I do!!
View 1 Replies
View Related
Dec 6, 2009
My mother's iMac G5 began this just two days ago. It turns on fine, but once is reaches the apple logo with the spinning wheel, the screen begins to exhibit what is shown in the pictures below. It first started when I opened an .AVI I received in an email from my uncle. When the file opened, the whole screen(within about 2 seconds) had discoloration and macro blocking spread from the center of the screen outward. After this I rebooted, tried again, and when I opened the file, it did the same thing. Now I can not even reach the log in screen. And after the screen has been in this state for a while, it may go blank and the fans run at full blast. I've opened the same file on a PowerMac G5 and a MacBook Pro with no problems.
View 7 Replies
View Related
Jun 3, 2008
I am running Leopard on iMac (with no built in cam).
My external iSight (firewire) has stopped working, its been ages since it worked i think about 2 updates ago. But I have lived with out it.
I now want to use it again.
I cannot find any drivers to get the thing working with Leopard. I am assuming its a leopard thing.
If i can not use the iSight Cam with my iMac does anyone know if any other external cam works with leopard?
Since my iMac is still in good condition and runs very well and fast I dont want to upgrade it just because it does not have the inbuilt cam.
View 3 Replies
View Related
Feb 21, 2009
I received a old macbook air. I installed OS once again. The inbuild isight camera is not show in the hardware list. I have updated OS to 10.5.6 X. that didnot help. How to activate the inbuild isight camera for webchats?
View 1 Replies
View Related
Mar 15, 2012
I have been with this problem since 4 months ago. I think after I updated Flash Player it stopped working. I have tried to restart the SMC but it didn't work. I have been taking care of my Mac Pro very well since I bought it last november 2010.
Info:
MacBook Pro, Mac OS X (10.7.3),
View 4 Replies
View Related
May 25, 2012
I have a 20" G5 iSight iMac running OS X 10.4.11. The optical drive will not recognise any discs other than original audio CDs - it takes a long time to do this, and is very noisy whilst spinning. Any other DVDs or CDs (including ones burnt on the same machine) are just ejected after about 30 seconds of whirring and do not appear to be recognised anywhere by the computer.
Info:
iMac G5
View 2 Replies
View Related
May 31, 2010
My MacBook's USB that near the shift key suddenly stopped working. Other works fine. cause I need to have both ports work. HOW do I solve this?
View 14 Replies
View Related
May 29, 2008
I have been connecting wirelessly to the same router for about 4 months now, using DHCP, and having the settings on the automatic connection. I left the computer on, but closed, so sleeping, for about two days. When i opened it, the battery did not yet run out but the internet has not connected since.
I have full connection in internet connect to my network. Status says connected. If I have the IPv4 using DHCP, the status says that i am connected but my computer have a self-assigned IP adress. When I put in the IP manually, the Network setting give me a green light on airport and says that I am connected to the network thru airport. Needless to say, no browsers (Firefox, Safari, Netscape, or Internet Explorer) have been able to connect to the internet.
I have tried running Disk Utility for any errors, but there have been no changes.
Powerbook G4
1.67 GHz PowerPC
512 DDR SDRAM
v. 10.4.11
View 7 Replies
View Related
Oct 5, 2009
guys my 24' cinema built-in isight not working with mac mini and os x 10.5.8...any idea?
View 3 Replies
View Related
May 6, 2012
Having weird problems with my MacBook Pro 13 (MacBookPro5,5). I bought this needing repair and replaced the LCD, the LCD Glass, the Camera/mic cable, and bought a used battery because the old one showed "Service Now". Just when I thought putting all this work in would get me going, I ran into two different problems that are driving me crazy. The battery will not charge with any magsafe attached (I have quite a few). The only way I can get it to finally charge is to remove the bottom cover, unplug the battery, and use a new, l-shape 85W Power supply to get it to charge again, It charges ONLY until I remove it. Once I remove the power suppy...even for a second, I will not light up again and it will go on battery power until it disappates (then I start all over ). I've tried every reset in the book, so it has nothing to do with the PMR or SMC (or however they are named). Also, before anyone asks...the old "Service Now" battery behaves exactly the same way .The isight camera STILL does not work, even with the new cable. Furthermore, I had another cover for the same unit with a camera in it and its own cable and tried to use the camera with that setup, and it still did not work. My guess is there is either an issue with logic board or the cable connector on the logic board.
The Apple Hardware test passes perfectly every time I run it (quick and extended). Disk is fine...checked it with drive genius and disk drill. I am open to suggestions if anyone has them. I'm guessing this is out of warantee, nor was I the original owner. Anyone have any ideas? Open to anything at this point.
Info:
MacBook Pro 13, Mac OS X (10.7.3)
View 2 Replies
View Related
Jun 20, 2010
So I just got a MacBook Pro a couple months ago, and I am having issues using webcam chat in Yahoo Messenger for Mac. The built in iSight cam doesn't seem to turn on (no green light) when I try to use it, and the person on the other end just sees a black screen for my webcam.
View 1 Replies
View Related
Oct 26, 2010
i received my new 27" ACD. This display is amazing! I use it on my Mac Pro 2008. No dead pixels, audio is working and iSight worked too. But after installing the "Software-Update for LED Cinema Display 1.0" my iSight is not working anymore!
Only black video window in iChat and FaceTime. And the green LED next to the iSight is off.
Seems that the iSight is not starting.
View 6 Replies
View Related
Jun 11, 2012
Using a Feb 2011 Macbook Pro with OSX Lion 10.7.4 It seems that every time i use my built-in iSight camera, then the next time i go to use it, it can not be found. This requires that I reset the PMU, which is kind of annoying. Then it works for a few weeks and the cycle of iSight begins again. Why does this happen? It seems pretty trivial to consistently recognize a camera which is wired into my computer. Is there something I could do to prevent this from happening again? I have tried turning it on and off again. And currently, this article is linking to the reset instructions for Intel iMac instead of the Macbook Pro page...
[URL]
Info:
MacBook Pro, Mac OS X (10.7.4), Feb 2011
View 2 Replies
View Related
Jul 4, 2012
I recently bought a base MBP-RD and can say that I am overall impressed with it, though I have found a couple issues already. One of them is related to the iSight camera which for some reason doesn't work. The camera appears in system profiler, but it shows as "camera not detected" when trying to launch application like iChat, Skype, FaceTime, etc. I already tried re-installing OSX Lion, and still not working.
I have also found some weird issue with graphics where it freezes a series of frames when going to Mission Control or App Expose.
I am returning this computer as there are other things I didn't like, but overall pretty impressive (no LED battery indicator, no Lock slot, no sleep light indicator...)
View 14 Replies
View Related
Mar 16, 2012
In message beta it say that I have no cam. But in device manger it lists isught under usb.
Info:
iMac, Mac OS X (10.7.1)
View 4 Replies
View Related
Jan 21, 2009
I was installing X-Plane 9 on my fairly new Mac Pro when it stopped working. I switched disks and nothing happened, the drive just won't spin up. I have tried a number of different CDs and DVDs and none will spin up. I can verify that by looking at the position of the disk when I put it in and take it out, it never moves.I have tried the usual reboot and resetting the PRAM. (I did the command option o r and un-plugged with power button for 5 seconds)I tried calling Apple care 2 times and the message I get is, the call center is closed. That's it, they don't even tell what hours they *ARE* open.
View 7 Replies
View Related
Nov 2, 2009
Recently my 2 month old (+/-) rev B MBA USB stopped working. When I plug in a thumb drive, DVD drive or anything, the power light on the usb peripheral comes on, but the drive does not mount. I am running SL, and until last week I had no issue.
View 1 Replies
View Related
Jan 2, 2010
a few days ago, (after reseting my computer with time machine) my Quick Look stoped working. all that hapens when i hit the space bar (or any other way of opinging quicklook) is the big grey box with nothing in it. I can still see the prevews of the items with coverflow.
When i checked console i got this message every time i trie to open a file " Finder[103]: [QL] Display bundle <QLGenericDisplayBundle: 0x11638e120> did not return a layer although it was required to because it did not return a view either."
View 2 Replies
View Related
