I ran diskwarrior as part of my usual maintenance, but after quitting and attempting to restart from the hard drive, a blue screen eventually appeared and there it remained.
This blue screen flickered slightly and intermittently and when doing so the cursor would disappear.
Identical results occurred when booting from the leopard install cd, running disk utility, quitting and restarting.
I have iMac 27 and screen problem on start up i have blue vertical lines, when it start i have a lot of blue dots and nothing else. when I connect outside monitor its showing the same.
Just installed lion and still the same problem when it starts blue dots, when startup in safe mode loads of blue lines and dots on the screen.
Info:
iMovie (iOS), Mac OS X (10.7.3)
while i am using my macbook the screen will suddenly go blue and flash between different blue colors like it is trying to work. sometimes it comes back on but most of the time it stays like that. I have to force shut down with the button and then restart...about half the time it is still flashing blue after the restart and if it does work, it goes blue eventually.
dont know if its a problem with the screen or what because the computer continues to work...if there is a movie on, you can here it in the background and the screen just flashes.
I just got a new mid 09 macbook pro no matter how I calibrate the screen. the dark/deep blue will always look like purple colour.
View 4 Replies View RelatedI am looking at purchasing an Ibook G4 but the description of the item includes this:"When you switch it on it begins to load up i.e. the blue screen with the Apple logo, but then the screen goes black or flickers. Said friend has kindly wiped the hard drive for me so now when you switch it on it makes the �opening� noise then you get a blue screen with alternating �?� and the Finder logo."
I have a feeling this may have been a temporary fault with the screen connector being loose and possibly damaged.But i assume the alternating "?" and the "finder logo" is simply a lack of OS?
just installed 10.5.6 on their last gen. iBook.She left the iBook plugged in to the mains and came back to find that the iBook was alternating between the grey Apple screen and a light blue desktop screen where she could see the cursor. Sometimes it would also switch to a blue screen without a cursor.
I've tried holding shift during startup - no effect.
I've tried rebooting NVRAM - no effect.
After windows is installed a Blue screen appears with cursor on screen but it freezes completely.I can fix this by restarting my mac , then once windows restarts i insert the Mac OS disc , select the disc within my computer but the following message appears "Package requires new version of installer"
View 8 Replies View RelatedI have a problem with my MacBook screen. Everytime I try to turn on the MacBook, the blue screen appears for a second and then everything gets dark (but I can see that the computer turned on normally, it's just the screen that gets almost black, without light). Sometimes only the right side of the screen is blue and then gets dark just like the left one. I was looking for the problem and I perceived that the left side seems to be loose and I can't fix it. What should I do?
View 2 Replies View Relatedgrey screen no apple followed by blue screen with vertical lines. Graphics and logic board replaced <6 months ago. What to do? I held down shift, it gets HOT HOT and makes noises. (for safety mode) followed by a blank grey screen and blue screen. Then tried the other way (I think it's command alt delete? I don't remember) and it turned from grey (no apple symbol) to blue blank. Then third time, grey followed by blue with vertical lines, not blocky clear lines that you can see if you are close to it.
Info:
MacBook Pro, OS Lion
New to Mac computers. When trying to open computer after being in sleep mode, I clicked the mouse to open the password screen, & a blank blue/black screen appeared & the mouse timer( colored circle) appeared, as if to be waiting. I had to unplug the computer to reboot it. This has happened twice in 2 days.
Info:
iMac (27-inch Mid 2011)
i have a mac ibook..and the screen is like halfway on there..and halfway not..the left two inches of the screen is blue...and everything is blurry except the background
View 11 Replies View RelatedI had the dreaded blue screen a week ago, thanks to a bit of research here I booted from disk, then disk utility, permisions and then finally a reinstall.but now unfortunatly I seem to have a shadow or some kind of screen burn for lack of better words on the bottom left side of my 27" LED imac
Info:
Mac OS X (10.6.8)
I've been using DiskWarrior for several years to optimize my hard drive and perform some hard drive maintenance.
It doesn't seem like it's been updated recently (ver. 4.2), so I'm beginning to wonder if the program has outlived its usefulness. Is there something else now that is better?
I use OS 10.6.5 on an iMac (mid 2007).
Is there a way I can use disk warrior on my imac internal HD?
It tells me that I cannot due to it being the OS HD..
or perhaps, can someone recommend an other way to breathe some new life in my computer? (24" white imac) I notice it moves a bit slowly wen opening and closing applications..
including simple ones like firefox or safari. I've alreayd maxed out the ram at 3gb.
is it normal when booting from disc to use diskwarrior to see the spinning loading circle thing and then the do not enter sign on mac pro?
View 3 Replies View Relatedmy intel mac OS X internal HDD crashed. (disk utility cannot mount hd, hdd grayed out) so i bought disk warrior online.
I'm currently running my OSX from an USB external HD. Install Diskwarrior in the external HD.
DW found my HD, click "rebuild" ...so far so good.
however, after running DW for about 10 mins, my computer goes to sleep. ever since then, I can't wake my computer to view the status of diskwarrior.
I hope DW is doing its thing but my external HD doesn't even blink. (i can hear the MAC is running?)
it's been 1 day now and still no sign of recovery??
An HFSJ mac HD crashed from another mac. I connected it externally, via USB, to a working macbook pro and installed diskwarrior on the working macbook pro's hard drive.
I started diskwarrior from the OS (I didn't boot using the disc) and it ran for a few days, trying to rebuild the directory for the crashed mac HD.
It concluded that the crashed mac HD was mechanically failing and could not replace the original directory with the rebuilt directory and, therefore, it could not display an original and preview pane, side-by-side.
It was, however, able to offer just the preview of the rebuilt directory and advised that I copy the data off to another storage device, which I am attempting to do now.
The problem is the preview directory is locked and read-only.
When I attempt to copy files over to another storage device, OS X, with respect to the preview directory, indicates that "The operation cannot be completed because you do not have sufficient privileges for some of the items.
I clicked on get info for the preview directory and the permissions are grayed out. There is a checkmark for the "Ignore ownership of this volume" checkbox. For my username, it says read and write, and I am the sole user on this machine.
it also has "staff" and "everyone" as usernames, where "staff" is read & write and "everyone" is read only. The lock is locked and, like the rest of this section, grayed out and cannot be changed.
I realize that DiskWarrior automatically locks the preview of the rebuilt directory. But how am I supposed to copy files to a different storage device if I can't change permissions?
Edit: I should mention it is DiskWarrior 4.2 and Mac OS X 10.5.8. The crashed Mac HD I am unsure, but I found a user guide on it for Tiger. So, it is probably 10.4.x
Can anyone tell me about their experiences with this app and recovering info from a filevault protected failing hard drive.
View 5 Replies View Related I got this error from Diskwarrior and am wondering what the deal is?
Here are the details:
My 80GB hard drive crashed and burned on my Macbook Pro Dual 1.83 running 10.5.8. I used Carbon Copy Cloner to clone the drive before it went totally kaput and then cloned it back onto a new drive that I installed into the MBP.
Upon running Diskwarrior 3.3 on the new clone in the MBP to look at permissions, I got error -9997. Do you know what that error indicates?
Googling it tells me that, if you get that error in 10.3 or 10.4 via Disk Utility (not DW) then you are missing a basesystem.pkg file. See:
[URL]
Looking back on the original clone, this file doesn't exist where the KB thread says it should so I'm assuming 10.5.8 doesn't use the same file in the same place.
I ran disk utility on the drive to look at permissions and other than a few corrected permissions, it didn't say there were any other errors.
So, which do I trus, disk utility or DW? Is this just a disconnect between the old DW 3.3 and 10.5.8 (I mean the old DW not reading 10.5 correctly for some reason) ?
Or do I need to do a clean install from the systems disk (something I really don't want to do if possible)?
would anyone have any suggestion what to do? I am running DiskWarrior for the last two years.
Now I upgraded to 10.5.6 and run the latest version of DiskWarrior 4.1.1.
the program works itself up to Step 8 in the "Rebuilding Directory" window and than it stops while it says "scanning disk one moment please and then a window comes up and asks me to "Shut down my computer, holding down the start button for a few seconds.
I have a Powerbook G4, 1.67 mHz.
Trying to boot up my MBP 10.6.8 with an updated DiskWarrior disk. Holding down "c" got me nowhere. Holding down "options" gets me to the screen showing the Mac HD and DiskWarrior DVD(which I just made, updated from the older DW 4.0). After choosing the DW, the computer just sits there. Is there a known problem with late-model MB Pros and DiskWarrior?
Info:
MacBook Pro, Mac OS X (10.6.8)
My girlfriend was using her Macbook Pro as usually when the Safari browser froze. She used the power buttom to turn it off and when she turned it back on her discs were gone. Now it was only possible to log in on the recovery-10.9.3.
So I used the disk utility, which showed that her partitions under a new names (Toshiba 750 Gb something). I ran the verify Disk and repair disk tools, which told me that there was a "Invalid B-tree Node size error" or something. There's is some importatnt files on the her hard disk (and of cause no backup) so I didn't dare to erase it completely. So I read about it and figured that I needed to run the Diskwarrior software.
Diskwarrior couldn't find the right disk, but it found a disk called "customer" which we ran the software on. After this the disk changed name to "untitled" and the disk utility no longer found any problems, so I went home because I though I only had to setup the system again. I reinstalled the OS, but now there is only a user called "Other..." that needs a Name and a Password (neither of which we can figure out).
I cant boot the su (CMD -S) directly from startup. I can boot from the Recovery partition, but I can't run the "sudo" command from the terminal window found in there.
Info:
MacBook Pro, OS X Mavericks (10.9.3)
I know yall probably get this a lot but I am having a lot of trouble rebooting my macbook. A while ago I was using my computer and all of a sudden it froze I then tried rebooting with the start up disk and was successful and everything began working fine again until all of sudden my mac just froze. I powered the mac down and i wouldnt turn on, so I tried to reboot the system again and everything was going fine the computer was installing all the software so I left it going overnight for Disk 1 to complete, when I woke up all I saw was a blue screen with a white box saying MAC OS X and under a blue bar with "starting Mac OS X" underneith. I then powered the computer down and redid the apple, option P R to reset the Ram again but I still get this blue screen that I cant get past. I have read about booting the computer up in safe mode and i tried that but that didnt seem to work.
View 2 Replies View RelatedMy iBook G4 (10.4.11 with 512MB) will not start up from the DiskWarrior disc.
I insert the disc and restart the computer holding down the C key until the screen comes up with the program on the screen and then let go of the C key.
The computer then promptly shuts down.
I have not had this problem before.
I have repaired the permissions using Disk Utility.
I want to run Diskwarrior for directory repair either for maintenance, or after a hard crash – on my 2011 MacBook Pro. Diskwarrior falls out of date everytime Apple updates the OS. I'm currently running Lion. I downloaded the free updater to 4.4, (I have a 4.2) but it still does not boot my mac.I (sort of) solved the problem by installing a full-blown Lion OS on an external firewire hard-drive, booting from it and then running Diskwarrior. Older versions of DW will do directory repair, they just aren't bootable if out of date.What I want to do is to boot from a Flash drive, and then run Diskwarrior.I have created a bootable flash drive, which works, but boots into the Mac OS X Utilities window (the same window you get when you boot into Recovery mode. Even though I'm booted from the flash drive, this window does not let me access Diskwarrior.I also have a 2T Time Capsule attached, can I put a copies of Lion and Diskwarrior on that to solve the problem?
Info:
MacBook Pro (15-inch Mid 2010), Mac OS X (10.7.3)
I tried booting up my Mac Pro, and it boots into a blank blue screen. I tried this several times, but no dice. Cannot boot into safe mode either. This happened about a month ago, and I did another reinstall. When I booted into my Apple Mac OSX Snow Leopard disk to repair, and it said everything was repaired.
View 1 Replies View RelatedI just installed the graphic card and when I turn on my Mac I get the Apple Logo and the spinning progress wheel and then the screen turns blue for 5 mins and then turns on. The tech at OWC said that it is normal to do that the first time but should speed up after the subsequent restarts, etc. Well, it is continuing to take 5 mins to start up.
Here are some screen shots of my Graphics card info and then another shot thats drivers installed YES and drivers installed NO. Is that correct?
I have an old mini mac and is working but the screen is blue and have tightened the connections but still blue screen???
Info:Mac mini, iOS 4
I've had a MacBook for about four months, completely standard version, no modifications, no nothing. It's been working perfectly. I've the latest version of Leopard and any other software update that comes with. Today I've been working on setting up a new user account entitled "Work" - for obvious purposes. I've copied my regular account's home folder as well as applications and such to make "Work" as much of a copy of my regular account as possible - let's call that account "Me".
And so I've mostly been browsing around "Work" trying to give it the same access to files as "Me" has - "Me" is an administrator, "Work" is standard - by changing access and privileges. I had some problems getting "Work" to save - when I would log out and then log in again, "Work" would have lost the preferences, e.g. Stacks and Dock settings. I also couldn't change the desktop picture for whatever reason.
So then I was going to log out "Work" to see if it still had the saving problem, and it lagged behind a lot, so I did the emergency-turn-off-by-holding-down-power-button-that-you're-not-supposed-to-do thing. And then when I tried to restart, it wouldn't............
Not sure where to put this posting, but just recently I installed tech tool pro 5 and recently my computer screen(s) keep turning blue, almost like they are about to go to sleep, or the computer is going to be reset!
View 4 Replies View Related