Software :: Airport Extreme Somehow Not Compatible?
Jan 8, 2009
i have an airport extreme and I'm trying to install the software for it onto my new iMac. When i plug the adapter into the wall, there aren't any colored lights (amber and green), only white, so i think i have an old airport. so is the software still compatible? what's going on? my internet provider currently is wild-blue and i have a satellite that send the internet to the modem connected to my desktop computer. so do i plug the ethernet cable from the modem to the airport? or from the airport to my desktop. i want to get wireless internet onto my MacBook Pro laptop.
I have a first gen Mac Pro, I would like to add an Airport Extreme Card but don't know what the part number is. Does anyone know the part number that's compatible with the Mac Pro?
As the title says, will the new airport extreme card with 802.11n work in an old iMac G3 capable of adding an airport card? I know I need the card adaptor, but does this new one work fine, or do I need to buy an older version? Also, which old macs would have compatible airport cards?
When I send a file from my XP workstation to the Canon LBP-3000 printer connected to my Airport Extreme Base Station I get the following XP Incorrect port message: "The port to which the printer is connected is not supported. Check the port."
I am trying to use a Canon LBP-3000 printer that is connected to the USB port on my Airport Extreme Base Station from a computer running Windows XP. The AEB is connected to an ethernet port on the same XP computer.
I have installed the latest LBP-3000 printer driver from the Canon .au website.
The TCP/IP port settings have been set up as follows:
Port name: IP_10.0.1.1 IP address: 10.0.1.1 Protocol: Raw Raw settings port no: 9100
Note that the printer works normally when connected as a local printer via a USB port on the XP host.
I am running Windows XP Home version 2002 SP3 The printer driver is titled "Canon Advanced Printing Technology for Canon LBP3000 R1.12 Ver.3.02.0.005 (Windows 2000/XP/Server 2003/Vista)"
The AEB firmware version is 7.5.1
Note that I am able to print via the AEB/USB to my Epson Stylus printer using the exact same setup as above (except for the printer driver).
Simple question: Of the new features in the new AirPort Extreme Base Station, which of these could become available to the old AirPort Extreme Base Station via a software/firmware update? I have to think that at least some of the new features don't actually require new hardware. Just trying to figure out if I want to shell out $179 for a new AEBS when my current AEBS works pretty well as it is.
I just got a time capsule and replaced my extreme with it then added my 2 expresses to the network. Was getting 28-33mbps download speeds using speedtest.net to test now i'm getting only 4-6mbps. WTH!!! Also the transfer rate for backing up my macbook to the tc drive is ridiculous!!!
I have an Airport Extreme, with two USB hard drives connected to it. The Airport Extreme shares these disks to my wireless network via Airport Disks.
Upstairs I have an Airport Express, that wirelessly connects to my Airport Extreme downstairs, and extends the wireless network so I get a good wireless reception upstairs.
My problem is, that it does not seem like me Airport Express does a good job of forwarding my 2 USB Airport Disks to the extended wireless network upstairs.
For example, when I use the AirVideo iPhone app to stream video from my USB Airport Disks I get a server connection error when I go upstairs and the iPad/iPhone switches to the Airport Express networks. I cannot reconnect as long as it is on the Airport Express network. If I turn the airport Express off, and thus switch to the poor wireless reception from the Airport Extreme, I can connect to the USB Airport disks again.
The Airport Express is connected to the Airport Extreme in bridged mode.
I have previously time machine backups for two macbook pros on same drive. However, I connect the drive to the airport extreme and although I see the drives and the backups, I can not access the files over Airport Extreme.
Just a question for those who have used the Airports. Can a USB hub be used to expand the number of devices the Airport can use? i.e., an external hd, a laserjet, and an inkjet.
This might seem an odd question but I had to replace my last Airport Extreme base station as it was faulty....I've now got the newer "Dual Band Extreme Base Station". I want to avoid any conflicts with my old settings for my wireless network with my MBP. Should I uninstall the last version of Airport Utility?Is there anything else anyone would recommend before i install or connect the new hardware/software?
Can it? If it can, would Airtunes still work like normal.
In other words, can I be connected to my Airport EXTREME and Airtunes would still work since the Airport EXTREME and EXPRESS are using the same network wifi-name (the Express is just extending the Extreme's range).
The latest upgrade of AIrport Utility doesn't support my Airport extreme, but the old version 5.6.1 says it doesn't work in Lion. How was I managing my Airport before th 6 update? What do I do now? Will I have to get a new Airport?
I have DSL service. I have an iPod Touch and an iPad 1 that I'm trying to connect. I just upgraded both iDevices to iOS5. I've been having trouble keeping an internet connection live for them, but now I can't even get the wi-fi to connect.
Just bought a new Airport Time Capsule 3TB for backup purposes and to use as the main router in my home (model number A1470 the latest tall one). I was originally using an AirPort Extreme (model number 1408 approx 6" square and 1' tall) for my main router. Â
I got the TC setup and putting out good wifi signal, but would like to take my Extreme and extend it off the TC to boost signal in other parts of my house, but having some difficulty. I searched the forums and found setup instructions to do this, but I get a message saying, "unexpected error. Try again." Well, tried again and still no luck.Â
I just purchased an Airport Extreme 802.11a/b/g/n to use as my home wifi router. I have two Airport Expresses 802.11b/g. I want to use one for Airtunes to my stereo and another for wireless printing.
I currently have the apple extreme as my wireless router. It works great. I absolutely love it. I have two macbook pro's (wife and I both have one) and use it for my PS3 and Xbox 360. I started a new job and was given a free HP desktop (not my choice, but hey, it's free, so what can I say). The desktop is not wireless and I am not able to put my computer near the airport extreme because my TV already owns that territory. Today I bought the Airport express to use as a bridge (and other things in the future). I have plugged it in. I opened the airport utility using my macbook. It finds my extreme and my express. I select that I want to set up the express. I select that I want to set it up using an existing wireless network. I select my airport extreme. It tells me that it has to restart the express. I wait approximately 3 minutes. It then tells me that the settings to the express have been changed but it's not able to find it.
My main goal is to use the express as a bridge. I have the express plugged in beside the desktop and want to run an ethernet cable from the express to the desktop to allow for wireless capability.
I have a Macbook (white unibody) running Snow Leopard. I have a personal wireless network using an Airport Extreme and I have an external hard drive (WD) connected to the Airport Extreme. I use this hard drive for my Time Machine Back ups.
I just got back from a trip and tried to back up my time machine. I got the error that the back up disk is not available. I then tried to open the airport utilities.
It tells me that "Airport Utilities is unable to find any Airport Wireless devices". I find this doubly strange because I have no problem connecting to the internet on this wireless network which supposedly does not exist.
I bought the new airport extreme to extend the wifi range in my household and hoped to share a hdd. Upon my experience and reading the forums, the sharing hdd is not as easy as I thought. But that is not my issue at the moment.
My issue is with extending the network. A couple weeks of ago, I did the setup to connect the two airport extremes together (older round AE & new box AE) using aiport utility. It seemed to have work because the signal was stronger in a part of the house that usually had 0 to 1 bar.
But shortly after, the signal showed itself as inconsistent. The signal strenght is jumpy from 0 to full bars. And right now, I am sitting in a part of the house that used to have 0 bars and now, I get full bars. And yet my mbp cannot see the newer, closer in distance AE.
I am upgrading from a g wireless router to an n. I have a Belkin right now that I hate. Neither I, on a mac, nor my roommate, on a PC, can get a consistent connection on it. Needless to say it's going back and I want to get an express or an extreme. I had actually bought an Airport Extreme first and it was lightening fast, but I was told that the Express was just as fast, so I went to exchange. The guy at BestBuy told me the Belkin was cheaper and just as fast, so I bought it. I would really like this to be my last trip to the store for a router. Do I need to shell out for the Extreme or is the Express just as fast if all you need is an n router?
I'm getting a imac (which should be delivered here next week), but also got the aiport extreme router to go along with it. Since we needed to update the router for the wireless network at home.Question is, will the airport extreme work fine with my sister's laptop that has windows 7?Some places I've read it does and others it doesn't.
Last week i tried getting into imovie, and a message comes up. It says "imovie requires a graphics card that is compatible with quartz extreme. One or more of your graphics cards does not support quartz extreme." I have been on a couple forums where people have had the same problem, and there doesn't seem to be a solution.
Intel GMA X3100:
Chipset Model:GMA X3100 Type:Display Bus:Built-In VRAM (Total):144 MB Vendor:Intel (0x8086) Device ID:0x2a02 Revision ID:0x0003 Displays: Color LCD: Resolution:1280 x 800 Depth:32-bit Color Core Image:Software Main Display:Yes Mirror:Off Online:Yes Quartz Extreme:Not Supported Built-In:Yes Display Connector: Status:No display connected
last week i tried getting into imovie, and a message comes up. It says "imovie requires a graphics card that is compatible with quartz extreme. One or more of your graphics cards does not support quartz extreme." I have been on a couple forums where people have had the same problem, and there doesn't seem to be a solution. I would really appreciate some help.
Intel GMA X3100:
Chipset Model:GMA X3100 Type:Display Bus:Built-In VRAM (Total):144 MB Vendor:Intel (0x8086) Device ID:0x2a02 Revision ID:0x0003 Displays: Color LCD: Resolution:1280 x 800 Depth:32-bit Color Core Image:Software Main Display:Yes Mirror:Off Online:Yes Quartz Extreme:Not Supported Built-In:Yes Display Connector: Status:No display connected
I've been looking at different websites (macsales.com, apple.com), and I don't know which airport card will work for my Mac Pro. I have the first release of the Mac Pro: http://apple-history.com/body.php?pa...der=ASC&range= Can any of you offer suggestions on which card will work? I'd probably prefer the OEM version, but if you recommend different ones, I'll be happy to consider them.
I've got an old school mac pro 1.1 (because i'm too poor to afford a newer one) which didn't come with an airport card when I go it. Have just grabbed one out of a Macbook to put in the mac pro. It works, but not as a normal airport card should.
I'm not sure if its an incompatible card, or if i'm just dealing with a software issues. The normal airport menu up by the clock is useless. It just says Airport: No configured, and then has a link to network preferences in system preferences. I can connect to a network, and once its connected it works how it should, but to connect I need to go into network in system pref, then under network name, select Join other network, then show network, then i'll see the list of networks and be able to select the right one. But if I restart, or the computer goes to sleep, it forgets all that information, and I have to go back to the start again and select the network again.
Do you think its an incompatible card, or is there some software trick I can do to get it working properly?
I've recently got a refurbished Mac Pro from Apple, and once I'd set my system up and tried to connect to the internet, I soon learnt that there was no Airport Card installed, so I'm unable to get a wireless internet connection.
Having looked in the Apple Store online, I can't see any internal cards, just base stations. I looked up the Airport Extreme Card, which I thought would solve my problem, but from what I could see that is only compatible with older Macs.
I have a PowerBook G4. I was running 10.3.9 previously. I just upgraded to 10.5.6. I have a older 2004 Airport Express running just itunes to a stereo in the living room. I have a new Express acting as a wireless router and airtunes to the stereo in the office. When I upgraded the OS I lost the older express in the living room. When I try to set up the older base station I get this message: "This version of the AirPort Setup Assistant cannot set up this AirPort Base Station. Please use the software that came with the base or that is available online station to set it up." The new OS will not allow me to install the old AirPort Setup Assistant for Graphite or Snow. It says the new set up assistant is compatible with the older models. Obviously contradicting statements.
I did a factory default reset. My computer will still not recognize it. Almost like it isnt plugged in. It is plugged in and flashing amber.
I have a Belkin N+ wireless router right now. I would like to get an airport express so I can stream my music into my living room where my stereo is. Is my current router going to work with this? Or would I need a Airport Extreme as my router.
What is the best and cheapest way to get an airport extreme card? I do not want to do it myself. I just want to know the cheapest and fastest way, because I don't want to spend to much time away from my baby.
I have an Airport Extreme Base Station and a Airport Express sitting in boxes, never being used. Our house is already equipped with wireless connection through our DSL and Linksys router. (was in place when I moved in)
I was thinking of getting a time capsule for back up, but not sure if I could get it up and running with the Linksys or not.
Can I use my Express as an extender for using my laptop in the backyard? will it talk nicely with the Linksys?
What are your suggestions/opinions? I hate to see my beautiful Apple products sitting in boxes.
I don't understand something very basic about the internet...
I have been using a 2WIRE wireless box plugged into my phone line/DSL for four years. I knocked it over and it doesn't seem like it is broadcasting a wireless signal anymore, so I bought an Airport Extreme Base Station, 2007 square model used.
I don't understand how to set it up... Can't I just throw away the 2WIRE thing now? When I try to use the Airport Extreme thing, it does not recognize the internet DSL signal or something.
I just want to use the Airport Extreme as a dsl wireless router alone.
I don't want the 2WIRE thing. The 2WIRE thing is usable when I plug my ethernet cord into it, but it is no longer broadcasing a wireless signal.
How do I set up the Airport Extreme with my DSL for wireless?
Sorry this is so stupid. I just don't understand what to do at all.
