Software :: Unable To Find AGP Graphics Card?
Oct 10, 2009AGP graphics card was not found on my new Mac Pro upon loading Final CutPro 4. What is the solution?
View 1 RepliesAGP graphics card was not found on my new Mac Pro upon loading Final CutPro 4. What is the solution?
View 1 RepliesI have a friends macbook. It's circa 2004 according to her. The display look horrible. It looks equivalent to like 8bit windows YUCK. I'm not sure the problem, but it's hard to diagnose (I'm a noob anyway), when I can't see anything!!
Heres a pic
could someone point me in the right direction. I tried searching but it's hard to find anything because I don't know how one might describe this problem correctly.
I just got a new mac pro dual quad core to replace my single dual core for work. Im trying to pull my Nividi Quadro 4500 out of my old machine that i had installed by apple in to my new machine. i get it all hoked in right but when i turn on my new machine it dosnt detect the display. Any suggestions?
View 5 Replies View Relatedlast week i tried getting into imovie, and a message comes up. It says "imovie requires a graphics card that is compatible with quartz extreme. One or more of your graphics cards does not support quartz extreme." I have been on a couple forums where people have had the same problem, and there doesn't seem to be a solution. I would really appreciate some help.
Intel GMA X3100:
Chipset Model:GMA X3100
Type:Display
Bus:Built-In
VRAM (Total):144 MB
Vendor:Intel (0x8086)
Device ID:0x2a02
Revision ID:0x0003
Displays:
Color LCD:
Resolution:1280 x 800
Depth:32-bit Color
Core Image:Software
Main Display:Yes
Mirror:Off
Online:Yes
Quartz Extreme:Not Supported
Built-In:Yes
Display Connector:
Status:No display connected
Yesterday my screen (30" Apple Cinema) started showing symptoms of graphics card failure, jagged lines across the screen. I rebooted my Mac Pro and it was gone. Then it happened again an hour later, this time the machine didn't boot, I get the Apple logo, and then it hangs up and the screen is shifted to left (I get apple logo on left side of the monitor instead of the middle) and jagged lines all over.
So the first thing I tested was using Target Disk Mode, it works. I can access my Mac Pro's internal HD's by TDM from my MacBook Pro. Then I tested single user mode, it does boot, I can't read what's written since the screen is shifted to left, but if I type (without seeing) reboot and hit enter, it reboots. So I assume the single user mode is working.
What else can I try to 100% make sure it's my graphics card that failed and everything else is ok with Mac Pro? I already ordered a graphics card replacement but I wouldn't like to be surprised if the Mac Pro still doesn't boot when the card arrives. It won't boot from Apple Startup DVD either. Same thing happens, gray logo then kernel panic with jagged lines all across the shifted screen.
I have an '06 Mac Pro and my Nvidia 7300 just sucks, so I'm looking to buy a new card. I saw this, which uses ATI Radeon 4870. How safe is this, and where can I use any Radeon card for this?
View 3 Replies View RelatedI bought my Mac Pro as a refurb from Apple, but it didn't come with the wireless card built in. This didn't bother me because at my old apartment my computer was near the router so I just wired it up by ethernet. I just moved into a new place and my computer isn't within router distance and I don't want to run a bunch of cable. My boss gave me a card to plug into Apple wifi card spot and OSX found the card and showed some airport info, but it didn't find any networks and if I run the Airport Utility it says it can't find an airport card. So I assume it's not compatible. What are my options? Oh yeah, I found this on ebay. Sound reliable? [URL:....]
View 22 Replies View RelatedI bought an early 2008 Mac Pro, and I am wondering if it will have the 802.11G or 802.11N graphics card, is there a way to tell?
View 5 Replies View RelatedI replaced my macbook pro last week with a MacPro 8 core.
For the last few days the GT120 graphics card was connected to two 24" dell monitors (2407 and 2408).
The 2407 is my main display and was connected via the display port to a display port to DVI-D adaptor and then to the DVI-D port on the screen. The 2408 was connected using the DVI-D on the graphics card straight to the monitor. This setup was great as I couldn't even tell if my mac was on or off because I couldn't hear any off the fans.
The only problem was that when running full screen video (EyeTV/Quicktime), the picture would sometimes stutter. After looking at the apple store website, a new GT120 was �99 for students so I picked one up yesterday.
The original GT120 is in slot 1 and is connected to my 2407 (main display) via DVI-D, the second GT120 is in slot 2 and connect to my 2408 via DVI -D. Now the problem is noise! I can now hear my mac whirring away all night (MacPro in my bedroom).
Any idea what the problem could be? When i run iTunes visualizer, both displays average at about 63fps and there is no stuttering of the picture. One thing I have noticed (using hardware monitor) is that when play itunes visualizer on full screen the GT120 in slot one uses 22% and the GT120 in slot two uses 99%.
Like is having a higher end GPU only good if you play games? Will it still boost the computers performance even if I do stuff that doesn't involve videogames?
View 4 Replies View RelatedI have two issues with my present X1900: it's not going to be OpenGL compliant come September, and more pressingly on a day to day basis, for some reason Eve Online, the game I'm rather addicted to, doesn't like me using two video cards - a stock GeForce 7300 and the Radeon.
I haven't been able to troubleshoot my way to confirming why I have the issue (and I've posted on Eve online forums - no one else seems to have the issue) but I get really odd graphics glitches when I have more than 2 screens 'detected'. Rather, when I have screens on more than 1 video card. I think it has to do with an ATI/nVidia conflict while running a Mac port of the Linux Port of Eve.
So I was hoping to get the 8800 perhaps, but they're getting pretty hard to find. Any other suggestions? Performance-wise I've been happy with the X1900, don't really *need* to upgrade, but I'd like to maximize OpenGL and solve this confilct issue so I'm not constantly climbing in behind my desk to unplug and replug DVI cables - I now run 3x monitors and a projector.
Price counts for me, I'd like to keep this upgrade as cheap as possible - don't use 'Pro' apps. I'm not afraid to flash a PC card if there's decent instructions around somewhere. This is actually a PC X1900 with a custom fan/heatsink fitted (Xcellero X2 or something? It's been a while).
I have a 7300 gt in my Mac Pro 1,1 and I am looking to upgrade. I am planning on getting a pc card and flashing it but am wondering what is the best card the Mac Pro 1,1 can handle. Should I just stick with the Ati 4870 or can I go bigger.
View 7 Replies View Relatedi have a EVGA 01G-P3-N959-TR GeForce 9500 GT Video Card - 1GB DDR2
my early 2008 mac pro doesnt see it what do i need to do to get it working?
Info:
Mac Pro, Mac OS X (10.7.4)
So basically, I bought a Mac Pro in mid 2007 with the following specs:
Two 2.66GHz Dual-Core Intel Xeon
1GB (2 x 512MB)
NVIDIA GeForce 7300 GT 256MB SDRAM
Anyways, I have just started using it again and would like to use it to play WoW (probably via BootCamp) but the current graphics card is really insufficient.
So what I'm basically looking for is a graphics card that would run in a mid-07 Mac Pro with the 2x2.66GHZ Dual-Core Intel Xeon's (ram is not an issue, I can upgrade this as well) - that will allow me to play WoW on even good settings.
I have a mac pro mid 2007. I read the ati radeon 5870 upgrade kit will work. My video card is fried will it automatically recognize the new card and boot up fine?
View 2 Replies View RelatedI posted this on the buyers guide forum but got no response. Maybe you guys can help.
I have a G5 dual 2.0 with 5.5 GB ram and an ATI Radeon 9600 pro graphics card.
I have been running Final Cut Studio with no problems. Once I upgraded to FCS 2, it seems to drag with some of the new fetures. Motion 3 seems really slow! So I added 2 more gigs of ram to bring it up to the 5.5.
I am waiting for the new MP like so many of you, but I will keep this computer for off line editing and compressor and for a part time assistant editor to use.
Would it be worth it for me to upgrade the graphics card?
If so what would be a good choice of card for this type of work.
FYI the last computer game I played was Zork, so I don't care about gaming.
Can you fit pretty much any graphics card into a mac pro? (Im new to mac so sorry if thats basic) Also say the card only worked with windows, if I plugged in a card and booted to windows would the card run that way? Reason I ask is that some of the work I do requires running high end games but I hate vista and have always wanted a mac. Im fine with dual booting if I have to but I was hoping that high end graphics cards would work on the mac pro so I dont have to buy two machines.
View 3 Replies View RelatedNow on my second 2008 MP 2.8 octo and this keeps happening to my screen. I assume its a problem with the standard ATI 2600 graphics card. Anybody experience the same problem, happens with many different apps. Have done all updates, all Apple said was reset the PRAMMy first MP died after a couple of weeks, logic board and both processors failed. Couldn't get replacements as Apple were still waiting for Intel to increase production so I ended up with a new MP.
View 15 Replies View RelatedI had recently purchased a 2nd hand G5 PowerMac with dual 1.8GHz processors and PCI-X slots. I think it was released in November 2003. It's a great machine, but suffers from its lacklustre 64MB graphics card. My Mac man told me not to bother, but I would like to investigate the option further. What do you think is available and where would I obtain one of these things? Oh, I should also ask the most important question...is it worth it?
View 10 Replies View RelatedWhat do you think is the most probable future BTO graphics option (eg. for the Nehalem generation) Mac Pro?
I would like to add one of the two new ATI cards (HD 4850 or 4870) in my mac pro to use in Windows.
I would like to replace the 2600XT completely and flash the new card for mac once there will be a version with an EFI-ROM (which probably will happen sooner or later, like the 3870 now) and therefore I want to get the card which is more likely to appear as mac version in about a year.
What is the best graphics card right now out there for gaming, movie editing, 3d graphics, and will be able to use the next generation HD monitors? preferably under $300. And if there is a better one coming out soon then what?
I have a late 2008 Mac Pro. 3.0 ghz. 4gb memory. and am looking to upgrade my graphics card.
Rite now im trying to install my gtx 280 in my mac pro 1 but it will not fit in the first pcie slot. I know its pretty easy to get it in on the 2nd slot, but im just wondering if it will work? Or do all graphics cards have to be on the first slot? I read here that you can either put it in the first or second. So Im just making sure.
I already took the stock 7300 out of the 1st slot though.
I have decided to upgrade the stock 7300GT on my Mac Pro. I have three choices:
)ATI Radeon HD 2600XT
)nVidia 8800GT
)ATI Radeon 3870
I'm thinking about selling off my 1st Gen Mac Pro and buying a new one. I use boot camp once in a while to run Vista 64-bit just for playing the Total War series of games, specifically Medieval 2 and now Empire. Any advice on best graphics card setup for those particular games under bootcamp? I'm not at all worried about on the OS X side of things as I don't really do anything graphic intensive there. I saw the new Nvidia GTX 285 is coming out soon. Any thoughts on that vs the Radeon 4870s? I'm currently running dual Radeon 3870s with crossfire but because I'm on a 1st Gen Mac Pro I can't get everything out of them so I think I may want to upgrade to a new Mac Pro.
View 4 Replies View Relatedwill a ATI Radeon HD 2600 PRO with 256MB in an imac or a 9600 gt m 512 in the umbp be better?
strictly the graphics cards, on gaming performance.
Are Xserve servers useable for daily work with OS 10.5? (non-server)
For the G5, what graphics card is the best for it?
[URL] is it
View 21 Replies View RelatedI just wanted to ask a question about graphics cards which I know nothing about.
What is the best card to get for gaming/3D (maya)? Apple and or PC/Flashed (sorry if that is not the right term) and is it possible to buy the PC cards already flashed?
i'm going to buy a new Mac Pro octo in a few days but i'm still wondering about the graphics cards.
I definitely need two of them in purpose of running four displays. The second will be a standard GT120.
What i need now is a fully compatible card that;
a. can drive two displays (30" and 24")
b. works without trouble with windows (bootcamp and XP or 7) and OS X
c. has a good gaming performance (i guess the 4870 is pretty poor with a 30", isn't it?)
I looked at the 4790, but i heard about difficulties with two monitors.
Basically, I wanted to just go on a simple game of Runescape with a friend of mine, and on High detail it was lagging... Now I'm sorry, but I have run High Detail on a freakin 4 year old dell with a 128mb internal gfx card and it hasn't lagged.
Is there a way I can check which graphics card is being used? Is there a way I can force it to use the 9600M GT?