I'm looking to get an external monitor, a Samsung 20" . It is 16:9 ,1600x900 / I wonder will I have problem to get the optimized 1600x900 on it? I will be using the mirror mode. I've been using an old 19" LCD 4:3(died). I used mirror mode, and the LCD at ~1280 x 1024. I'm worry if I don't see the 1600x900 option in the display preference menu.
View 1 RepliesI'm trying to connect my MacBook to an external 19" Samsung LCD monitor. I connect using a standard Apple mini-DVI to male DVI adaptor, which in turn is connected to a third party female DVI to female VGA adaptor, which in turn is connected to a VGA cord which connects to the monitor (male on both sides).
My monitor shows up in the System Preferences display settings, where I can control everything properly, but the screen is black. I can move my cursor over to the other screen, so it seems the MacBook can recognize the monitor. The monitor connects fine using the VGA cord to a Thinkpad.
Is there any inherent with this connection configuration?
I used to have a mac Mini that connected so effortlessly to the monitor and allowed the full resolution (1920x1080). But I'm trying to do that with my MacBook (as I recently sold my Mini) and I'm unable to get it to do what I want to. I have Snow Leopard. It would not allow me to do anything until I updated the OS. The monitor was not recognized at all. Except I noticed when I plugged it in, the macbook screen would flash...so I figure it's recognizing something. But in display settings, detect display wouldn't show anything, neither would restarting. That is, until I updated Snow Leopard.... Anyone know why this might be? And now that I've been able to get something on the display, I'm still not at all satisfied. The resolution is terrible. It will not allow me to choose anything other than the resolution on my macbook screen, but over 23" it just looks terrible. Not only that, but the Macbook screen stays on. I want the mb screen to go off, and full resolution be on the external monitor. I can choose another option for an extended desktop but that's just ridiculous. I have no desire for anything like that.
View 5 Replies View RelatedI bought a Belkin Thunderbolt 2 Express HD Dock and connected my Samsung monitor (1920 x 1080) using the Thunderbolt through connector. The monitor looks pink, sometimes green, whatever – not balanced color. When I connect the monitor directly to the Thunderbolt connector on the Mac, it's fine.
View 1 Replies View RelatedI Late 2008 Macbook Pro. My needs have shifted lately, as I am now using it mostly with an external display. I ran it into my 23(?) LG 1080 LED monitor with no problem. I recently bought a Samsung 27' Syncmaster SA550 monitor. I am in love with it, however I cannot find a display size that fits the monitor. I am currently running the 1080p resolution setting on my computer but it is easily 2-3 inches too small. And with overscan its too big to see my menu bar and dock at all. Running at a 24-25' screen size is still much better than my 15 inch macbook pro screen, but it would be awesome to use all of the 27 inches of this monitor. I have been unable to find a working setting, if there is a trick, or a way to setup a custom size As well I am running this as the sole display (not dual screens)
Info:
MacBook
Pro, iOS 5.1, External Display: Samsung SA550
I have a 15" Powerbook, and have just had an old mirror-door 867Mhz desktop Mac delivered. Is it possible to use the Powerbook's screen as its monitor? How could I connect the two?
View 3 Replies View RelatedI have an old eMac collecting dust. Is there any way of using any it as an external monitor?
I mean, what I would like to do is display video out from my Macbook onto the screen of the eMac as a secondary display.
I have a 17" G4 powerbook. I would like to get a display for it. Will i have to keep my laptop open if I am using the monitor? Or will I be able to close the laptop and still use the monitor?
View 2 Replies View RelatedI've been given (!) a G5 iMac which is practically brand new. It's only problem is that it suffers from the sudden shut off issue which seems to plague the G5 thanks to a faulty Power Supply and some caps on the mobo which get taken out by the PS. I've replace the power supply, but can't afford to get the mobo fixed, and since neither Apple nor any of the alternative operating system makers such as Linux will be supporting this system into the future, I figure that the hardware is essentially orphaned. I'd dearly like to use the screen though, as it's in great shape and is a beautiful display. So, my question is, can the internal screen be connected to an external source such as the video card of another computer? It would be great to use it for my music production machine. If anyone has any ideas, let me know. In the meantime I'm going to have a look around inside this beast and see what I can do.
View 3 Replies View RelatedI've got an old 20 inch blue and white CRT monitor connected to my last rev. Powerbook G4 with RAM upped to 1.5 gigs. I also have some peripherals connected to the usb hub on the monitor and all my ports on the powerbook itself are used up as well. Basically I'm running this mainly as a desktop. So, through the day while i'm working I get these blips on the screen randomly. they are horizontal blips almost as if I've just turned the monitor on. It is seriously about a millisecond. blink of an eye. anyways the freeze happens 99% of the time right after one of these blips AND while I'm holding the mouse button (usually manually scrolling in Firefox) it freezes for a second, i get the spinning beachball, but then it turns back to the arrow.
i can move the arrow all over the place, but i cannot do anything else. option+apple+esc doesn't do anything. the scaling effect doesn't work on the dock. i can't start or quit anything. if iTunes is playing, the music plays on, yet everything else is still frozen. so I open the lid and hold down the powerbutton until it shuts down. then i start up again. i have no problems when i use the powerbook without the external monitor. so is the monitor the culprit? Do i need to get a newer monitor? could it be a problem with usb 1.0 ports on the monitor and the usb 2.0 ports on the powerbook - a conflict of interest so to speak?
I want to run my g4 17 inch powerbook connected to an external screen with the lid closed, when i shut it the external screen goes off aswell, I have been told to use an external keyboard etc, I want to use a bluetooth keyboard and mouse. Is there anyway of doing this?
View 12 Replies View RelatedI have screens from 2 dead ibooks is it possible to turn then into external monitors?
View 1 Replies View RelatedHi- I have an ibook G4 (mid 2005). I'd like to be able to connect it to my new 22" external display so that I can have dual monitors. However, the external display plug obviously does not fit into the slot in the ibook.
Does anybody know the name of the converter cable I would need to buy in order to connect the external display to my ibook? And roughly how much these cost?
I was wondering if I could use my old ibook g3 as a monitor for a windows computer.
View 5 Replies View RelatedI have a 17" PowerBook G4. I am looking at getting an external desplay. Does anyone know if I can use the display with my powerbook closed? Or do I have to keep my laptop open?
View 3 Replies View RelatedI have a 24" dell external monitor that I use with my 17" MBP. My wife would like to hook up her 12" ibook to the 24" monitor. Is this possible, and what cables would I need?
View 4 Replies View RelatedI have a 14'' iBook and recently bought an LG 19'' Widescreen monitor. I am testing a Dell 17'' on it right now before I open the LG one, but my problem is that the same screen shows on my ibook and the external. This isn't what I want. I have read you are supposed to be able to close the laptop and then it shifts to the external display but this is not working for me.
This is my goal:
Use my bluetooth keyboard full time
Have my ibook closed at all times
Have my external as my main display
How do I make this work?
Having some trouble using my Acer 22" LCD with my 1.67GHz low-res Powerbook. It had always worked fine until I installed the Leopard graphics update, after which the LCD stop receiving a signal through the DVI connection. The OS will detect that a monitor is connected (blue screen) but it will not send a signal to the monitor. I read on the Apple discussion board that a lot of people with MBP's were having the same issue. Last night I reformatted the HD and went back to Tiger, updated to 10.4.11, and to my surprise the exact same problem persists. I know it's not an issue with the monitor itself, as my PC works fine with it.
View 10 Replies View RelatedMy friend has a PowerBook G4 and he wants to connect it with an external 20" Apple Cinema display. His friend told him it was not possible to connect it, but I am not certain if this information is correct. He asked me to help advise him on this, but unfortunately I don't know enough about Apple hardware to give him the information he is looking for. I am wondering if anyone happens to know the answer on this.
View 7 Replies View Relatedirst off, according to mac tracker the Powerbook I have is the Powerbook G4 15 inch FW-800. I am running Mac OS X Leopard 10.5.6
Alright. About one week ago, I hooked up the powerbook to a 19 inch external LCD monitor with a DVI to VGA convertor, and all was well. It found my supported resolution and everything, worked straight away, etc.
Fast forward to today, at about 2pm (4 hours ago) I was using the computer and everything was working fine, but I had left it on for a few days so I shut it off when I was about to take a nap. I wake up from said nap about 20 minutes ago, turn on my Mac and my external display is only showing up at 800x600. I have no idea how this could have happened. This would not be an issue if my monitor's native resolution of 1440x900 were on the massive list of resolutions to chose from, but alas it is not.
I read the thread about how to pivot your screen over in another section but it didn't address what to do when it goes wrong. And it did...very wrong. I'm running a Powerbook G4 Titanium 15" laptop with Tiger OsX 10.4.11 and I hooked an external monitor to it. I was playing around with the settings and saw the rotation feature, which wasn't available until I attached the external monitor. As soon as I clicked on 90 degrees, both the main screen and the external fritzed out. I could vaguely see things through the haze on the main screen but the whole thing had stopped responding to all mouse and keypad commands. Eventually the only thing I could do to regain control was a hard shut off with the power button and unplug the external. After that the main screen booted up just fine but the moment I hook up the external again they go blue screen of death on me and I can't see what I'm doing to undo what I did!! I tried hitting the manual reset on the screen itself, which I didn't really think would work but hey, desperate times...
After some research on the internet I found out that, contrary to what the other thread says, not all Tiger enabled computers can run the rotation function, apparently because the scan rate, or something like that is too low. Which is why the option was disabled when only the main screen was running. Nice to know and would have been good to know sooner but what I need help with now is HOW DO I FIX THIS MESS?!!!! Some sites mentioned archiving (I'm moderately computer savvy but I'm not totally sure I know how to do that) and some have mentioned the boot disk, which I have but I want to make sure I know what will happen if I do that. I've backed up my files just in case. Will it erase the programs I've installed or just my settings? Or is it much simpler and is there something in the utilities I can mess with that will reset stuff?
I just purchased a Samsung Series 4 Model 530 monitor, 32 inch, with a resolution of 1920 x 1080p. Can this effectively be used as the main monitor for my new Mac Pro laptop? I can NOT find this resolution in the prefs anywhere, and do not know if I can really use this monitor. I work in print design, and as a result, I am always viewing typography in great detail.
View 2 Replies View RelatedI read a few posts that seem to indicate that non-mac monitor cannot display higher them 1680x1200 when connected to a Mac computer. A friend of mine is planing on getting a new Mac pro with a 30" Samsung monitor (2560 x 1600). Will he be able to run the monitor a max resolution?
View 7 Replies View RelatedI love my new mac-Mini refurb and new Samsung DVI 21.5 monitor. My MacGeek score went from 341 on my 2001 466 mhz G4 Digital Audio model to 3044 on the new 2010 2.26 base Mac-MiniStartup is unreal fast... Applications move so much faster as it should be! *Hard to believe that this little box is 10 times the CPU speed and 6 times the hard drive @ 25% of the price in 2000.
View 11 Replies View RelatedI have the standard 13" aluminum macbook, and I was looking into getting the 'Mini DisplayPort to VGA' adapter to connect my 22" Samsung monitor. On the Apple website, I have seen nothing but horrible reviews about the connection cable, saying that it exclusively does not work with Samsung brand monitors and TV's. On the other hand I only see good things about it connecting to other devices and monitors.
Can anyone shed any light on this? It's already ridiculous that i have to pay the 30$ price for this cable just to use an external monitor, the least I can do is know that it will for sure work.
I have just stumbled upon an amazing deal at [URL] Apparently, you can get a brand new Mac Pro with a 22' Samsung LCD monitor for only $2794! Here is the link to their website..
View 15 Replies View RelatedI have a 2.4 GHz Aluminum MacBook which I'm trying to connect to a Samsung T220HD LCD monitor/TV.
I'm using the Mini Display to VGA adaptor.
I know the adaptor works b/c I can connect it to another external monitor at my work.
When I connect the MB to the monitor, the MB sees it b/c "Syncmaster" shows up after I detect displays. However, nothing shows on the T220HD screen. Sometimes, the LCD simply says, "There is no device connected."
I connected my Samsung syncmaster 215TW with macbook - via minidisplay port reduction to DVI. when I turn the monitor verticaly, nothing happens... do I have to install some aditional software to my macbook?
View 3 Replies View RelatedI'm doing up my setup sometime in the near future, and this includes getting new dual monitors for my PC, or to use to expand my MBP.
The Dell is �40 more expensive (24" usually seem to be this expensive compared to 23") Does anybody know which one actually has the better display?
I've been using my 15" MacBook Pro (purchased late 2009) running 10.6.5 with a very old 23" Apple Cinema Display for a year now with no problems. I use both the laptop screen and the external monitor at the same time. Recently I tried switching to a Samsung SyncMaster 245BW since the Cinema Display is starting to show its age in terms of picture quality. Everything works fine until I launch QuickTime or any application that uses QuickTime (iTunes for example). This causes the Samsung monitor to jump back and forth very quickly from a screen full of snow to a normal screen over and over and over, rendering the external monitor useless. The only way to get it to stop is to quit QuickTime, unplug the external monitor, and plug it back in.
The same thing happens when I try switching external monitor resolutions from 1920x1200 to anything else. The only refresh rate available is 60hz. All others are grayed out. My MacBook Pro apparently has just one graphics card since the energy saver preferences don't include the option to switch between better graphics and power saving.
