PowerPC :: Using IMac G5 Monitor With External Source?
Dec 9, 2006
I've been given (!) a G5 iMac which is practically brand new. It's only problem is that it suffers from the sudden shut off issue which seems to plague the G5 thanks to a faulty Power Supply and some caps on the mobo which get taken out by the PS. I've replace the power supply, but can't afford to get the mobo fixed, and since neither Apple nor any of the alternative operating system makers such as Linux will be supporting this system into the future, I figure that the hardware is essentially orphaned. I'd dearly like to use the screen though, as it's in great shape and is a beautiful display. So, my question is, can the internal screen be connected to an external source such as the video card of another computer? It would be great to use it for my music production machine. If anyone has any ideas, let me know. In the meantime I'm going to have a look around inside this beast and see what I can do.
View 3 Replies
ADVERTISEMENT
Mar 30, 2010
How do I disable the external video source from my MacBook Pro on my iMac without disconnecting the cable? Is there a key combination on my iMac?
View 2 Replies
View Related
Jan 9, 2010
I have a 27" i7. I have a 24" DVI Montior hooked up to it via MDP->DVI adaptor. When the 24" Monitor is on, everything is fine. When I turn the monitor off, the magic mouse tracking on the 27" screen stutters. I am not kidding - it took me ages to figure out that to fix I either need to turn the other monitor on OR disconnect the MDP->DVI adaptor.
View 2 Replies
View Related
May 25, 2007
I have a 15" Powerbook, and have just had an old mirror-door 867Mhz desktop Mac delivered. Is it possible to use the Powerbook's screen as its monitor? How could I connect the two?
View 3 Replies
View Related
Jun 1, 2009
I have an old eMac collecting dust. Is there any way of using any it as an external monitor?
I mean, what I would like to do is display video out from my Macbook onto the screen of the eMac as a secondary display.
View 2 Replies
View Related
Aug 28, 2006
I have a 17" G4 powerbook. I would like to get a display for it. Will i have to keep my laptop open if I am using the monitor? Or will I be able to close the laptop and still use the monitor?
View 2 Replies
View Related
May 4, 2007
I've got an old 20 inch blue and white CRT monitor connected to my last rev. Powerbook G4 with RAM upped to 1.5 gigs. I also have some peripherals connected to the usb hub on the monitor and all my ports on the powerbook itself are used up as well. Basically I'm running this mainly as a desktop. So, through the day while i'm working I get these blips on the screen randomly. they are horizontal blips almost as if I've just turned the monitor on. It is seriously about a millisecond. blink of an eye. anyways the freeze happens 99% of the time right after one of these blips AND while I'm holding the mouse button (usually manually scrolling in Firefox) it freezes for a second, i get the spinning beachball, but then it turns back to the arrow.
i can move the arrow all over the place, but i cannot do anything else. option+apple+esc doesn't do anything. the scaling effect doesn't work on the dock. i can't start or quit anything. if iTunes is playing, the music plays on, yet everything else is still frozen. so I open the lid and hold down the powerbutton until it shuts down. then i start up again. i have no problems when i use the powerbook without the external monitor. so is the monitor the culprit? Do i need to get a newer monitor? could it be a problem with usb 1.0 ports on the monitor and the usb 2.0 ports on the powerbook - a conflict of interest so to speak?
View 5 Replies
View Related
Aug 25, 2008
I want to run my g4 17 inch powerbook connected to an external screen with the lid closed, when i shut it the external screen goes off aswell, I have been told to use an external keyboard etc, I want to use a bluetooth keyboard and mouse. Is there anyway of doing this?
View 12 Replies
View Related
Aug 26, 2008
I have screens from 2 dead ibooks is it possible to turn then into external monitors?
View 1 Replies
View Related
Sep 29, 2008
Hi- I have an ibook G4 (mid 2005). I'd like to be able to connect it to my new 22" external display so that I can have dual monitors. However, the external display plug obviously does not fit into the slot in the ibook.
Does anybody know the name of the converter cable I would need to buy in order to connect the external display to my ibook? And roughly how much these cost?
View 3 Replies
View Related
Nov 14, 2009
I was wondering if I could use my old ibook g3 as a monitor for a windows computer.
View 5 Replies
View Related
Aug 28, 2006
I have a 17" PowerBook G4. I am looking at getting an external desplay. Does anyone know if I can use the display with my powerbook closed? Or do I have to keep my laptop open?
View 3 Replies
View Related
Sep 28, 2008
I have a 24" dell external monitor that I use with my 17" MBP. My wife would like to hook up her 12" ibook to the 24" monitor. Is this possible, and what cables would I need?
View 4 Replies
View Related
Sep 15, 2007
I have a 14'' iBook and recently bought an LG 19'' Widescreen monitor. I am testing a Dell 17'' on it right now before I open the LG one, but my problem is that the same screen shows on my ibook and the external. This isn't what I want. I have read you are supposed to be able to close the laptop and then it shifts to the external display but this is not working for me.
This is my goal:
Use my bluetooth keyboard full time
Have my ibook closed at all times
Have my external as my main display
How do I make this work?
View 21 Replies
View Related
May 26, 2008
Having some trouble using my Acer 22" LCD with my 1.67GHz low-res Powerbook. It had always worked fine until I installed the Leopard graphics update, after which the LCD stop receiving a signal through the DVI connection. The OS will detect that a monitor is connected (blue screen) but it will not send a signal to the monitor. I read on the Apple discussion board that a lot of people with MBP's were having the same issue. Last night I reformatted the HD and went back to Tiger, updated to 10.4.11, and to my surprise the exact same problem persists. I know it's not an issue with the monitor itself, as my PC works fine with it.
View 10 Replies
View Related
Aug 25, 2008
My friend has a PowerBook G4 and he wants to connect it with an external 20" Apple Cinema display. His friend told him it was not possible to connect it, but I am not certain if this information is correct. He asked me to help advise him on this, but unfortunately I don't know enough about Apple hardware to give him the information he is looking for. I am wondering if anyone happens to know the answer on this.
View 7 Replies
View Related
Mar 6, 2009
I'm looking to get an external monitor, a Samsung 20" . It is 16:9 ,1600x900 / I wonder will I have problem to get the optimized 1600x900 on it? I will be using the mirror mode. I've been using an old 19" LCD 4:3(died). I used mirror mode, and the LCD at ~1280 x 1024. I'm worry if I don't see the 1600x900 option in the display preference menu.
View 1 Replies
View Related
Mar 7, 2009
irst off, according to mac tracker the Powerbook I have is the Powerbook G4 15 inch FW-800. I am running Mac OS X Leopard 10.5.6
Alright. About one week ago, I hooked up the powerbook to a 19 inch external LCD monitor with a DVI to VGA convertor, and all was well. It found my supported resolution and everything, worked straight away, etc.
Fast forward to today, at about 2pm (4 hours ago) I was using the computer and everything was working fine, but I had left it on for a few days so I shut it off when I was about to take a nap. I wake up from said nap about 20 minutes ago, turn on my Mac and my external display is only showing up at 800x600. I have no idea how this could have happened. This would not be an issue if my monitor's native resolution of 1440x900 were on the massive list of resolutions to chose from, but alas it is not.
View 5 Replies
View Related
Jan 20, 2010
I read the thread about how to pivot your screen over in another section but it didn't address what to do when it goes wrong. And it did...very wrong. I'm running a Powerbook G4 Titanium 15" laptop with Tiger OsX 10.4.11 and I hooked an external monitor to it. I was playing around with the settings and saw the rotation feature, which wasn't available until I attached the external monitor. As soon as I clicked on 90 degrees, both the main screen and the external fritzed out. I could vaguely see things through the haze on the main screen but the whole thing had stopped responding to all mouse and keypad commands. Eventually the only thing I could do to regain control was a hard shut off with the power button and unplug the external. After that the main screen booted up just fine but the moment I hook up the external again they go blue screen of death on me and I can't see what I'm doing to undo what I did!! I tried hitting the manual reset on the screen itself, which I didn't really think would work but hey, desperate times...
After some research on the internet I found out that, contrary to what the other thread says, not all Tiger enabled computers can run the rotation function, apparently because the scan rate, or something like that is too low. Which is why the option was disabled when only the main screen was running. Nice to know and would have been good to know sooner but what I need help with now is HOW DO I FIX THIS MESS?!!!! Some sites mentioned archiving (I'm moderately computer savvy but I'm not totally sure I know how to do that) and some have mentioned the boot disk, which I have but I want to make sure I know what will happen if I do that. I've backed up my files just in case. Will it erase the programs I've installed or just my settings? Or is it much simpler and is there something in the utilities I can mess with that will reset stuff?
View 2 Replies
View Related
Nov 14, 2009
I have a 27" Imac and want to use an old 19" monitor as an external unit. I have it hooked up and turned on. Just the old wallpaper shows on it. There isn't an icon or anything diff on my iMac screen for it. How do I use the external? I realize this is pretty dumb, but I'm a newbie here and my Mac expert son is in NC....
View 9 Replies
View Related
Apr 8, 2008
I have a newer iMac 24" bought in 11/2007. I have the mini-dvi to vga converter and when I connect it to a external tv capable of 1024x768, the iMac freezes and does nothing. I disconnect and the screen turns blue and the flickers back on and everything works. I have made the connection then booted up, and I have tried every resolution all the way down to 640x480, same thing it just locks up the screen, but again as soon as I unplug the mini-dvi to vga cable from the iMac it flicks to a blue screen and everything comes back. I have reviewed dmesg nothing, and revieiw /var/log/messages. Is there any troubleshooting I can do. I am old school unix/linux guy just converted my family to Apple and would like to use the display on my tv to watch my iTunes movies.
View 3 Replies
View Related
May 13, 2006
Just wondering if i can use my Imac G5 lcd as monitor for a pc? I want to learn 3Dmax and need to buy a pc,if i could utalise my Imac G5's display as display for a pc aswell would be a big help not only is it an excellent Lcd, but i could save $$.
View 3 Replies
View Related
Jan 24, 2008
I had a quick question regarding a mod I'm considering with a G4 iMac 17". Basically, I want to dismantle the original machine and make a new box to connect to the G4's arm and display. However, I remember reading somewhere that the G4's display used some type of proprietary connector and that this would be impossible. Can anyone who has more knowledge on this than me let me know if I can do this? Soldering is not a problem if needed.
View 2 Replies
View Related
Aug 18, 2010
Forgive me if this has been discussed on here previously, I didn't see anything in a cursory search, so here I am. I've come into ownership of a discarded iMac G3 (aqua, tray-load) that upon plugging in, starts, and then sits on the gray Apple logo screen for eternity, so I know that the CRT works. What I want to do is this: I currently have an LG flatscreen monitor plugged into a converter box that turns coax cable into a VGA signal, so I'm using the monitor as a TV, with external speakers, in my office. I'd love to be able to use this iMac in the same way, essentially just use the screen and leave all the guts in there spinning all day long. Now, I've seen a bunch of posts around the web about using the iMac G3s as external monitors for MacBooks and whatnot, but that all seems to rely on actually routing information through the computer itself, rather than just the screen. Has anyone done this? If I get one of the converters out there that'll turn the 15-pin monitor connection into a VGA hook-up, will the CRT still have power? Is there another option? Do I have to resort to iMac-quarium (which would still be a cool addition to the office)?
View 1 Replies
View Related
Nov 14, 2010
I have an old iMac G4 and I was wondering if I could just use the screen somehow since I don't need to use it as a computer? Could I use it like a TV to play xbox or something?
View 6 Replies
View Related
Nov 17, 2010
I have a first gen iMac 24 Intel with a dead logic board. However everything works in it. The screen, power supply, isite, speakers. appear to work fine. I got a MacBook Pro to replace it and I wanted to know if there is a way to turn the old iMac into something that is more like the Apple 24� display, even if I need to do electronics work in it.
I am in IT and have access to a lot of dead stuff I can scavenge for parts. I am also an electronic technician, so I should be able to do this. I just don�t know what I need to do.
Hunting down info on this topic has come with that there are controller issues. If I can pull a controller out of another dead LCD display that I happen to have, I can see it working. I can even see the possibility of adding the electronics from a USB hub to pipe USB functions over a DVI cable. And get the iSite and speakers working.
View 1 Replies
View Related
Aug 6, 2008
Upon booting the machine, the LCD display flashes a proper view of the login screen for about 1 second
but then goes dark. When an external monitor is attached the external monitor works perfectly fine -- the
only trouble being that the external monitor is not currently set to "mirror" so it is impossible to log in and access the machine. The IT dept at the institute has a monopoly on repair of computers and so the quick answer -- take it to Apple is not all that easy. Is there a way to:
1) set the iMac to mirror display upon booting up by some clever key combination?
2) set the machine to mirror by remote access and command line methods?
3) mirror by changing something using target mode?
4) or the obvious...somehow login using the real estate provided by the external monitor.
Also has anyone seen this problem with iMac displays? An Intel iMac I think 2.16 Intel Core 2 Duo processor running Tiger.
View 4 Replies
View Related
Oct 23, 2009
I heard this is possible, however will it be possible with a windows laptop ( dell e6400) It's a work laptop and wasn't sure If I could do this with some sort of adapter.
View 8 Replies
View Related
Nov 14, 2009
Title says it all...how does the new iMac work as an external monitor? Is there a way to use it as a monitor without having to log in / load OS? Is there any delay as compared to a standard monitor? I'm just thinking long term as the iMac becomes long in the tooth and we move on to new machines. Can the iMac still be used as a quick turn on monitor or do you need to load up both machines (and do you need to rely on all parts functioning in the iMac, such as mobo, hard drive, etc. still working) to utilize it as a monitor)?
View 3 Replies
View Related
Feb 16, 2010
I am iMac 27" owner and I would like to know if it is technically possible (how?) and advisable to connect a PS3 (or other videogame station) to show it in the iMac 27" display.
View 1 Replies
View Related
