I have a 15" Powerbook, and have just had an old mirror-door 867Mhz desktop Mac delivered. Is it possible to use the Powerbook's screen as its monitor? How could I connect the two?
View 3 RepliesI have an old eMac collecting dust. Is there any way of using any it as an external monitor?
I mean, what I would like to do is display video out from my Macbook onto the screen of the eMac as a secondary display.
I have a 17" G4 powerbook. I would like to get a display for it. Will i have to keep my laptop open if I am using the monitor? Or will I be able to close the laptop and still use the monitor?
View 2 Replies View RelatedI've been given (!) a G5 iMac which is practically brand new. It's only problem is that it suffers from the sudden shut off issue which seems to plague the G5 thanks to a faulty Power Supply and some caps on the mobo which get taken out by the PS. I've replace the power supply, but can't afford to get the mobo fixed, and since neither Apple nor any of the alternative operating system makers such as Linux will be supporting this system into the future, I figure that the hardware is essentially orphaned. I'd dearly like to use the screen though, as it's in great shape and is a beautiful display. So, my question is, can the internal screen be connected to an external source such as the video card of another computer? It would be great to use it for my music production machine. If anyone has any ideas, let me know. In the meantime I'm going to have a look around inside this beast and see what I can do.
View 3 Replies View RelatedI've got an old 20 inch blue and white CRT monitor connected to my last rev. Powerbook G4 with RAM upped to 1.5 gigs. I also have some peripherals connected to the usb hub on the monitor and all my ports on the powerbook itself are used up as well. Basically I'm running this mainly as a desktop. So, through the day while i'm working I get these blips on the screen randomly. they are horizontal blips almost as if I've just turned the monitor on. It is seriously about a millisecond. blink of an eye. anyways the freeze happens 99% of the time right after one of these blips AND while I'm holding the mouse button (usually manually scrolling in Firefox) it freezes for a second, i get the spinning beachball, but then it turns back to the arrow.
i can move the arrow all over the place, but i cannot do anything else. option+apple+esc doesn't do anything. the scaling effect doesn't work on the dock. i can't start or quit anything. if iTunes is playing, the music plays on, yet everything else is still frozen. so I open the lid and hold down the powerbutton until it shuts down. then i start up again. i have no problems when i use the powerbook without the external monitor. so is the monitor the culprit? Do i need to get a newer monitor? could it be a problem with usb 1.0 ports on the monitor and the usb 2.0 ports on the powerbook - a conflict of interest so to speak?
I want to run my g4 17 inch powerbook connected to an external screen with the lid closed, when i shut it the external screen goes off aswell, I have been told to use an external keyboard etc, I want to use a bluetooth keyboard and mouse. Is there anyway of doing this?
View 12 Replies View RelatedI have screens from 2 dead ibooks is it possible to turn then into external monitors?
View 1 Replies View RelatedHi- I have an ibook G4 (mid 2005). I'd like to be able to connect it to my new 22" external display so that I can have dual monitors. However, the external display plug obviously does not fit into the slot in the ibook.
Does anybody know the name of the converter cable I would need to buy in order to connect the external display to my ibook? And roughly how much these cost?
I was wondering if I could use my old ibook g3 as a monitor for a windows computer.
View 5 Replies View RelatedI have a 17" PowerBook G4. I am looking at getting an external desplay. Does anyone know if I can use the display with my powerbook closed? Or do I have to keep my laptop open?
View 3 Replies View RelatedI have a 24" dell external monitor that I use with my 17" MBP. My wife would like to hook up her 12" ibook to the 24" monitor. Is this possible, and what cables would I need?
View 4 Replies View RelatedI have a 14'' iBook and recently bought an LG 19'' Widescreen monitor. I am testing a Dell 17'' on it right now before I open the LG one, but my problem is that the same screen shows on my ibook and the external. This isn't what I want. I have read you are supposed to be able to close the laptop and then it shifts to the external display but this is not working for me.
This is my goal:
Use my bluetooth keyboard full time
Have my ibook closed at all times
Have my external as my main display
How do I make this work?
Having some trouble using my Acer 22" LCD with my 1.67GHz low-res Powerbook. It had always worked fine until I installed the Leopard graphics update, after which the LCD stop receiving a signal through the DVI connection. The OS will detect that a monitor is connected (blue screen) but it will not send a signal to the monitor. I read on the Apple discussion board that a lot of people with MBP's were having the same issue. Last night I reformatted the HD and went back to Tiger, updated to 10.4.11, and to my surprise the exact same problem persists. I know it's not an issue with the monitor itself, as my PC works fine with it.
View 10 Replies View RelatedMy friend has a PowerBook G4 and he wants to connect it with an external 20" Apple Cinema display. His friend told him it was not possible to connect it, but I am not certain if this information is correct. He asked me to help advise him on this, but unfortunately I don't know enough about Apple hardware to give him the information he is looking for. I am wondering if anyone happens to know the answer on this.
View 7 Replies View RelatedI'm looking to get an external monitor, a Samsung 20" . It is 16:9 ,1600x900 / I wonder will I have problem to get the optimized 1600x900 on it? I will be using the mirror mode. I've been using an old 19" LCD 4:3(died). I used mirror mode, and the LCD at ~1280 x 1024. I'm worry if I don't see the 1600x900 option in the display preference menu.
View 1 Replies View Relatedirst off, according to mac tracker the Powerbook I have is the Powerbook G4 15 inch FW-800. I am running Mac OS X Leopard 10.5.6
Alright. About one week ago, I hooked up the powerbook to a 19 inch external LCD monitor with a DVI to VGA convertor, and all was well. It found my supported resolution and everything, worked straight away, etc.
Fast forward to today, at about 2pm (4 hours ago) I was using the computer and everything was working fine, but I had left it on for a few days so I shut it off when I was about to take a nap. I wake up from said nap about 20 minutes ago, turn on my Mac and my external display is only showing up at 800x600. I have no idea how this could have happened. This would not be an issue if my monitor's native resolution of 1440x900 were on the massive list of resolutions to chose from, but alas it is not.
I read the thread about how to pivot your screen over in another section but it didn't address what to do when it goes wrong. And it did...very wrong. I'm running a Powerbook G4 Titanium 15" laptop with Tiger OsX 10.4.11 and I hooked an external monitor to it. I was playing around with the settings and saw the rotation feature, which wasn't available until I attached the external monitor. As soon as I clicked on 90 degrees, both the main screen and the external fritzed out. I could vaguely see things through the haze on the main screen but the whole thing had stopped responding to all mouse and keypad commands. Eventually the only thing I could do to regain control was a hard shut off with the power button and unplug the external. After that the main screen booted up just fine but the moment I hook up the external again they go blue screen of death on me and I can't see what I'm doing to undo what I did!! I tried hitting the manual reset on the screen itself, which I didn't really think would work but hey, desperate times...
After some research on the internet I found out that, contrary to what the other thread says, not all Tiger enabled computers can run the rotation function, apparently because the scan rate, or something like that is too low. Which is why the option was disabled when only the main screen was running. Nice to know and would have been good to know sooner but what I need help with now is HOW DO I FIX THIS MESS?!!!! Some sites mentioned archiving (I'm moderately computer savvy but I'm not totally sure I know how to do that) and some have mentioned the boot disk, which I have but I want to make sure I know what will happen if I do that. I've backed up my files just in case. Will it erase the programs I've installed or just my settings? Or is it much simpler and is there something in the utilities I can mess with that will reset stuff?
I have a 27" i7. I have a 24" DVI Montior hooked up to it via MDP->DVI adaptor. When the 24" Monitor is on, everything is fine. When I turn the monitor off, the magic mouse tracking on the 27" screen stutters. I am not kidding - it took me ages to figure out that to fix I either need to turn the other monitor on OR disconnect the MDP->DVI adaptor.
View 2 Replies View RelatedI have a G4 powerbook with an LCD that only displays the top 25% of the screen. I've been using an external monitor with it just fine. Today, I reinstalled the OS and ran into a problem. The main OSX startup menu (you know, where it asks for your location, timezone, personal info, etc) is prompting me for information, and I can't see the forms to fill them in! The external monitor defaults to "extended" as opposed to "mirrored", and the forms are embedded, meaning I can't drag them over to my external monitor. Obviously, if I can't fill out these forms and get to the desktop, the laptop is completely useless.
Does anyone know how to force the external monitor to be "mirrored" from startup? Is there a keycommand?
I have been using the latest macbook pro 13.3" since April 2010. Over the last week the monitor suddenly goes completely white and the external monitor goes black. The laptop becomes unresponsive although the programmes opened continue running (e.g a skype voice call would continue without interruption although the monitor is all white).
The only solution at the moment is to press the turn off button for a few seconds then switch the laptop on again. It will then work normally until for no apparent reason this happens again.
I picked up a new MacBook yesterday and I noticed a weird issue when coming out of "monitor sleep" mode, not regular sleep mode.
When I move the mouse, the external monitor shows what you see in the picture, kinda like a TV with no signal. The MacBook screen works fine so what I just do is unplug and re-plug in the DVI plug and everything is good again.
My 24 inch Dell monitor worked fine with my M1330 and other computers so I know it's not that. Does anyone have the same issue or maybe give me some light on this?
Is there a way to use my external monitor as my only monitor when connected to my mbp? Or, can i clone my display, but at separate resolutions? I am able to do this on windows with nvidia software, is there software that allows further customization?
View 3 Replies View RelatedI have a 22" Dell external monitor on my MBP. I know that I just close the cover to my MBP to shut off the screen. What do I do in those instances that I want to use both screens? There has to be something simpler than restarting the MBP?
View 3 Replies View RelatedAs said, my current set up is an HDMI - DVI cable (HDMI to monitor and DVI to adapter) and my DVI - mini DisplayPort adapter, everything is connected fine but when I turn on the monitor, it says cable not found... and nothing is displayed on the screen but on the Macbook side of things, it sees the monitor is connected (I can extend the screen and leave the screen) but other than that, it appears I cannot get an image on the monitor, pressing every button on the monitor does not work either.
Any other information that may seem necessary, let me know. I tried clearing my PRAM and clearing the power and such but nothing seems to work.
I've hooked up my Macbook Pro 2009 to my external monitor and everything works. The issue is the mac image on the external monitor is cut off like I can't see the white top bar. Any solutions to fix this issue?
View 1 Replies View RelatedI have a Macbook Pro 2.16 Core Duo, and I'm wanting to install 10.6, but about a year ago, I cracked my screen to the point that I cannot make anything out on it, and haven't replaced it. Instead, I have just been using it in clamshell mode, which has worked out fine so far. My problem is that I cannot get the 10.6 install to show up on my external monitor.
I searched around, and could only find one other similar thread that just ended with the author putting it in clamshell and having it work fine. When I boot to the install and close the screen, I just get a grey box on my external display with a black bar on either side of it. I can't seem to find any other resources, so I'm not entirely sure what to do at this point. Any help would be greatly appreciated.
i've never had to buy this seperately, but can i buy ANY kind of monitor?i was thinking about this one.plus, i was gonna install leopard on it. good idea or not?i've been hearing mixed reviews on leopard on older macs. some people tell me i should just get tiger. its running panther right now.
View 2 Replies View RelatedI am new to this forum, an old guy who is not very tech savy. I have two Powerbook G4s that are about 4-5 years old, a 17" and a 15". My 17" 's screen is half gone, but the 15" is fine. Is there a way to use the screen on the 15" as an external monitor so I can work from my 17" ? I was able to hook my 17" up to a dedicated external monitor in another city and it worked great, but the cables I used to do that with were obvious.
View 1 Replies View RelatedJust wondering if i can use my Imac G5 lcd as monitor for a pc? I want to learn 3Dmax and need to buy a pc,if i could utalise my Imac G5's display as display for a pc aswell would be a big help not only is it an excellent Lcd, but i could save $$.
View 3 Replies View RelatedDoes anyone know if a regular iBook G4 1.2ghz 12" can run a nonApple VGA monitor through a mini vga to vga connection?
I have no idea, but saw a monitor I liked at Fry's and wondered if I could run the larger monitor off the iBook?
