I would like to upgrade to Tiger, the system is 900Mhz,has 256mb of ram, 40gb HDD and is currently running 10.2.8 (jaguar??) I was wondering if I could upgrade to Tiger using the Tiger install disks that I got with the imac c2d or is there an issue with this being a laptop and ppc ? I really dont have much of a clue about this kind of stuff with a mac, when I upgrade to Tiger I would also like a fresh install, there are no files I wish to keep, this presented a problem with my old xp laptop for drivers. Will the same happen when I upgrade the ibook? Should I format the HDD before attempting to upgrade to Tiger? If so how do I do this?
2/ I would like to install an airport card. Would I be able to install an Airport extreme card so that I can use 802.11g? Is the airport card even user installable?
I would like to upgrade my 17" Powerbook G4 to wireless n, but I'd like to upgrade the internal airport extreme card instead of using a PC Card adapter.
Are there any options for this?Will this airport extreme card from early model MBPs work?
my specs: 17" pwrbk Hi-res 1.67 G4 late 2005 model: Powerbook 5,9
I got this iBook a few days ago for my son, and it has been working fine until I decided to upgrade to OSX 10.4. For some reason it freezes during the install. I tried using the original Installation discs that came with the iBook and I get the same thing. STRANGE!!! I was told it was a bad RAM chip, but it only has the onbord chip so I had nothing to replace. Apple Hardware test passes with flying colors, I have reset the PMU to no avail....Kinda at a loss here. Oh, I have tried booting into Single User mode and installing that way as well...no dice.
i bought a lot of 5 eMacs at my local auction. i got 4 700mhz and one 1.0ghz. when i turned on the 700mhz i noticed that it had a card installed. now my question is how do i take it out? I ask b/c i wanna put it in my clamshells instead.
I bought an airport extreme card in 2006, and haven't tried installing it until this morning (always been hardwired!) Can't seem to figure it out now, as the card seems too small for the slot on my Powerbook G4.
I tried installing Leopard on my iBook G4 and it did not succeed. Now, my computer has a half-installed upgraded OS that doesn't work. I was told at the Apple Store that my computer would run better with Tiger anyway since my processor is not up to snuff to handle Leopard (my iBook is from Jan 2006) and that I should erase the hard disk and re-install Tiger.
So now I'm trying to reinstall Tiger but when I insert the disk, start up the computer holding down the C key, the start stalls at the apple logo gray screen with the little cog spinning around. Nothing happens after that.
Anyone knows if the install cds shipped with the macbook pro C2D are able to install OSX on a PPC mac. Macbook pro install CD to install tiger on a G4 Powerbook?
I want to upgrade my wife's Mac Mini (2007, 1.66 GHz Core Duo, model T2300) with a new HDD. I've done that a couple years back, but times were less complicated. Here are my questions:
1) I hope a 7200 rpm drive will improve performance, without generating more noise than a 5400 rpm drive. Is that a correct assumption and would you recommend that?
2) Looks like many of the 500 GB 7200 rpm drives are SATA II. Will that be compatible with the plugs in the machine? Will I have to set any kind of jumper pins (I've never done that, though)? 3) My plan is to naturally do a time machine back up of the current drive to use it to build the new one. However, I still need to install Mac OS X Snow Leopard. The Mac mini came with a Tiger install disc. How do I get to SL with the least trouble? Do I need to start with the original Tiger disc, then use the Leopard disc and finally upgrade with the SL disc or can I use the SL disc right away?
I just obtained a PowerPC G4 Tower, but there was no hard drive in it. Because of this, I put in an older 20 gb hard drive I had just laying around. It is from an old Windows PC I had, but I don't know if thats a problem or not. Anyways, when I try to boot from the Tiger disc, nothing happens. I have tried holding down C when I turn the mac on, but that doesn't help at all. I just always get the mac icon with a question mark in the middle of the screen. I am just wondering, is this anything to do with the PC hard drive I put in the mac? Or is there something else that I am doing wrong? I just want Tiger to be installed on the computer.
I have an original Tiger 10.4 install disk for a G-5 computer. When I boot up the computer with the install disk everything is fine. However when I run Disk Utility the only option I have for formatting the partitions is MS-DOS or free space. No Mac OS X formats are offered. If I run a 10.5 Install disk I am offered the options in Disk Utility to use Mac OS X HDD formatting. Any one have any idea what I need to do to get DU in Tiger to format the HDD in Mac OS X format? BTW, the HDD's in the unit are pre-formatted in Windows NTFS if that makes a difference. I just want to make sure Tiger supports Mac OS X format before doing anything else.
I've got a flat panel G4 iMac, currently running 10.3.9. I'm having ongoing problems: frequent kernel panics, weird things happening to the display (display breaks up into a jumble of lines on occasion). I've done the usual troubleshooting: disk utility, apple hardware test, reboot in Safe. I want to try reinstalling the OS to see if this helps.
Problem: I don't have the install discs for OS 10.3.9 - about a year ago the logic board was replaced and I had the service swap in a new hard drive at that time and they loaded 10.3.9 when they did this. I don't want to buy 10.4 at this point - with Leopard coming out soon from what I understand, also want to make sure I can get the computer running properly again before I throw any more money at it. I've tried using borrowed discs to install 10.4, but I keep getting a message stating: "you cannot install this software on this computer". This has happened with 3 different borrowed install discs. Two of the borrowed discs were for iBooks, one was for a G5 iMac.
I have an iMac G3 DV Special edition which I bought off of craigslist with 400MHz, 384MB of Ram and a 13GB hard drive. It came with Mac OS X 10.1.5 and I'd like to upgrade it to Tiger. I have the install DVD and when I insert the disc, the iMac sees it and asks me to restart the machine so it can install but when I click ok and it restarts, nothing happens. It just boots back into Mac OS X. I've tried holding down the C key and setting it to boot the disk in the System Preferences area but nothing.
so i want to install tiger on my G3 600 mhz 256 mb RAM imac that has no dvd drive.i looked around the net and found that apple used to accept tiger DVD's and exchange them for CD's for a 10$ fee but thats no longer the case....
i also found that i could install tiger from another mac with a DVD drive using firewire disk mode...so i looked around my things and found an old firewire cable and hooked both machines up (imac and my mbp) and restarted the imac holding down the t key and so then the firewire symbol shows up on the imacs screen...well from what i understand the imac's HD is supposed to show up on my mbp desktop...this never happens.And ive tried it multiple times...so i dont know what the problem is..and ive tried it using OS 9 and 10.0 the OS's the machine came with..
my problem is the following, I have an Ibook G3 which Disk Drive is busted. So i'm trying to install Tiger To it (PPC) by using Target Disk or Disk Target (w/e) mode connecting it with my Mac Book Pro. I restored the Ibook with the disk utility on the MBP putting as source the installer for tiger which I ripped off the img file from the the retail version I bought. And so I rstored it to the HD of the Ibook, takes about 15-10min(Maybe less) and done. When I turn on My Ibook it automatically boots into the installing of OS X process. Everything goes smooth until I get to the part that I have to choose the destination but I can't choose anything because the HD for the Ibook won't show, it doesnt show any possible destination for me to save to. I have read the read me files and everything on the software and about the option botton on the "destination" part but the botton cannot be selected. I read something about the formatt of the Ibook for tiger to work and I have it in "Extended (Jornaled)" and i'm upgrading it from Mac 9 classic, but the drivers for mac 9 aren't installed since I accidentally (w/o knowing) erased everything on the hard drive the first time I did this with the Disk utility.
I installed a new 250GB WD ATA hard drive in my 450mhz Sawtooth G4. The computer sees the drive, it works in target disk mode but nothing will install.
When I try to install Tiger from the DVD or the 4xCD set it gives an error after a minute of installing and says to restart. The Tiger disks crash my G5 as soon as I try to boot them. When I try to install Leopard via target disk mode from my G5 it says it cannot be installed on this computer.
This isn't one of the computers that has to have the OS installed in the first 8gb of the drive partition is it? I don't want to install 10.3, too much of my software isn't compatible with it. It was running 10.4 fine on the old 30gb drive.
my hard drive freaked out on my g3 ibook so i went to reinstall tiger on it...i can't get it to boot from an external dvd rom and start the instalation process...it gets a kernel panic and the only thing i can do is shut it off...is there anything that i'm not doing or is the hard drive fubar'd?
I have a 12 in powerbook with a non working cd drive. The problem is that my osx install died. I' pulled the HD from the machine and wiped the hd, and now is an unformatted hd. I go about installing osx without any mac computers, just my windows machines. Networking is an option.
I've got a Tiger Retail Disc that I've used on 2 previous machines without a hitch.Now, I urgently need to install Tiger on a 12" 800mhz iBook G3, yet after thirty minutes, it tells me to Try Again!Some erros tell me that there are essential files that can't be copied."Unable to copy package source file /System/Installation/Packages/Essentials.pkg/Contents/Resources/BundleVersions.plist"Some files for Essentials may not have been written correctly"
I have an external firewire drive and I made an iso of Tiger (from Original CD). I used Disk Utility to make what I think to be a bootable firewire drive.I selected the ISO as the source and the External as the Destination. When I hook up the external to the ibook and hold down the options key I have a gray screen with a refresh and and right pointing arrow.
i got a ibook g3 and i cant install my copy of tiger it is on cd and cant get it to boot it reads it fine if it is on desktop but not if i hold c or key it dose however boot in other macs
I would like to install an internal airport card in my Mac pro (2008) as I didn't order the wireless BTO option and the USB adapter I tried instead didn't satisfy me. When I asked for the card at an apple reseller they said to me that this upgrade would cost a lot of money because they haven't only to order the card but they have to install the antennas as well. I went home and checked the interiors of my machine and saw three antenna cables (labeled with 1,2,3) which seem ready to be connected to an airport card. So I don't know if I have to believe this antenna thing. Are the antennas already preinstalled in every Mac Pro or do I really have to bring the whole computer to the store?
I gave a fella a hand the other day by pointing him to a post I had on my site. I thought I'd list in in a new thread for others to see too. So if you want to add 802.11n to your Mac Pro, see how I did it. [URL:...]
A friend of mine got an iBook G4 14" with a 60GB HD that wasn't working, so he exchanged the HD, but now he is not able to get the iBook up and running because he doesn't have the installation DVDs for Tiger or any other OSX
My question is, could I use my OSX installation DVD (Tiger) in order to install Tiger to his iBook and get it up and running? I have my original installation DVDs and everything that came with my iBook, but I don't know if those will only work with my computer, or if they're limited to be installed in one computer at a time.
I really want a new MBP to replace my aging G5 but I can't quite afford it yet. Maybe by the end of the year.
In the meantime, I was thinking about doing some upgrades to try and get me through the rest of the year. RAM is pretty cheap, but what about a new video card?
I have a G5 single 1.8GHz (2.25 GB of memory) with a GeForce FX 5200 AGP card. I'm mostly concerned with CS3 and video playback.
Here's my options: ATI Radeon 9600 from Other World Computing? A card from eBay? (I've heard good things about applemacanix) A PC card and flash it? (Though I'd have to find a PC friend to do it, as I don't have another computer.)
Or do nothing and limp along until I get that MBP?
