PowerPC :: Won't Upgrade / Hangs During Install Of Tiger
Mar 27, 2007
I got this iBook a few days ago for my son, and it has been working fine until I decided to upgrade to OSX 10.4. For some reason it freezes during the install. I tried using the original Installation discs that came with the iBook and I get the same thing. STRANGE!!! I was told it was a bad RAM chip, but it only has the onbord chip so I had nothing to replace.
Apple Hardware test passes with flying colors, I have reset the PMU to no avail....Kinda at a loss here. Oh, I have tried booting into Single User mode and installing that way as well...no dice.
View 1 Replies
ADVERTISEMENT
Apr 17, 2007
I would like to upgrade to Tiger, the system is 900Mhz,has 256mb of ram, 40gb HDD and is currently running 10.2.8 (jaguar??) I was wondering if I could upgrade to Tiger using the Tiger install disks that I got with the imac c2d or is there an issue with this being a laptop and ppc ? I really dont have much of a clue about this kind of stuff with a mac, when I upgrade to Tiger I would also like a fresh install, there are no files I wish to keep, this presented a problem with my old xp laptop for drivers. Will the same happen when I upgrade the ibook? Should I format the HDD before attempting to upgrade to Tiger? If so how do I do this?
2/ I would like to install an airport card. Would I be able to install an Airport extreme card so that I can use 802.11g? Is the airport card even user installable?
View 16 Replies
View Related
May 25, 2012
I downloaded the most recent safari upgrade for Leopard (Not Snow Leopard). Every time I try to use it, Safari hangs the entire computer before loading the home page and takes a minimum 10 minutes before I can do anything. I just get the Spinning Pinwheel of Death. I tried reinstalling it but that hasn't worked.
Info:
Power Mac G5, Mac OS X (10.5.8), 1GB Ram
View 1 Replies
View Related
Aug 28, 2009
Can this be done, or does it need to be a clean install?
View 3 Replies
View Related
Mar 16, 2009
I tried installing Leopard on my iBook G4 and it did not succeed. Now, my computer has a half-installed upgraded OS that doesn't work. I was told at the Apple Store that my computer would run better with Tiger anyway since my processor is not up to snuff to handle Leopard (my iBook is from Jan 2006) and that I should erase the hard disk and re-install Tiger.
So now I'm trying to reinstall Tiger but when I insert the disk, start up the computer holding down the C key, the start stalls at the apple logo gray screen with the little cog spinning around. Nothing happens after that.
View 4 Replies
View Related
Apr 22, 2009
1)How much ram do I need? 2)What kind of video card? 3)The G5 has Tiger installed now. Do I need to upgrade? 4) Any other suggestions?
View 7 Replies
View Related
Nov 30, 2006
Anyone knows if the install cds shipped with the macbook pro C2D are able to install OSX on a PPC mac. Macbook pro install CD to install tiger on a G4 Powerbook?
View 3 Replies
View Related
May 14, 2010
I want to upgrade my wife's Mac Mini (2007, 1.66 GHz Core Duo, model T2300) with a new HDD. I've done that a couple years back, but times were less complicated. Here are my questions:
1) I hope a 7200 rpm drive will improve performance, without generating more noise than a 5400 rpm drive. Is that a correct assumption and would you recommend that?
2) Looks like many of the 500 GB 7200 rpm drives are SATA II. Will that be compatible with the plugs in the machine? Will I have to set any kind of jumper pins (I've never done that, though)? 3) My plan is to naturally do a time machine back up of the current drive to use it to build the new one. However, I still need to install Mac OS X Snow Leopard. The Mac mini came with a Tiger install disc. How do I get to SL with the least trouble? Do I need to start with the original Tiger disc, then use the Leopard disc and finally upgrade with the SL disc or can I use the SL disc right away?
View 5 Replies
View Related
Mar 10, 2009
I just obtained a PowerPC G4 Tower, but there was no hard drive in it. Because of this, I put in an older 20 gb hard drive I had just laying around. It is from an old Windows PC I had, but I don't know if thats a problem or not. Anyways, when I try to boot from the Tiger disc, nothing happens. I have tried holding down C when I turn the mac on, but that doesn't help at all. I just always get the mac icon with a question mark in the middle of the screen. I am just wondering, is this anything to do with the PC hard drive I put in the mac? Or is there something else that I am doing wrong? I just want Tiger to be installed on the computer.
View 13 Replies
View Related
Jul 9, 2010
I have an original Tiger 10.4 install disk for a G-5 computer. When I boot up the computer with the install disk everything is fine. However when I run Disk Utility the only option I have for formatting the partitions is MS-DOS or free space. No Mac OS X formats are offered. If I run a 10.5 Install disk I am offered the options in Disk Utility to use Mac OS X HDD formatting. Any one have any idea what I need to do to get DU in Tiger to format the HDD in Mac OS X format? BTW, the HDD's in the unit are pre-formatted in Windows NTFS if that makes a difference. I just want to make sure Tiger supports Mac OS X format before doing anything else.
View 3 Replies
View Related
Mar 4, 2007
I've got a flat panel G4 iMac, currently running 10.3.9. I'm having ongoing problems: frequent kernel panics, weird things happening to the display (display breaks up into a jumble of lines on occasion). I've done the usual troubleshooting: disk utility, apple hardware test, reboot in Safe. I want to try reinstalling the OS to see if this helps.
Problem: I don't have the install discs for OS 10.3.9 - about a year ago the logic board was replaced and I had the service swap in a new hard drive at that time and they loaded 10.3.9 when they did this. I don't want to buy 10.4 at this point - with Leopard coming out soon from what I understand, also want to make sure I can get the computer running properly again before I throw any more money at it. I've tried using borrowed discs to install 10.4, but I keep getting a message stating: "you cannot install this software on this computer". This has happened with 3 different borrowed install discs. Two of the borrowed discs were for iBooks, one was for a G5 iMac.
View 14 Replies
View Related
Dec 21, 2007
I have an iMac G3 DV Special edition which I bought off of craigslist with 400MHz, 384MB of Ram and a 13GB hard drive. It came with Mac OS X 10.1.5 and I'd like to upgrade it to Tiger. I have the install DVD and when I insert the disc, the iMac sees it and asks me to restart the machine so it can install but when I click ok and it restarts, nothing happens. It just boots back into Mac OS X. I've tried holding down the C key and setting it to boot the disk in the System Preferences area but nothing.
View 24 Replies
View Related
Jul 4, 2008
so i want to install tiger on my G3 600 mhz 256 mb RAM imac that has no dvd drive.i looked around the net and found that apple used to accept tiger DVD's and exchange them for CD's for a 10$ fee but thats no longer the case....
i also found that i could install tiger from another mac with a DVD drive using firewire disk mode...so i looked around my things and found an old firewire cable and hooked both machines up (imac and my mbp) and restarted the imac holding down the t key and so then the firewire symbol shows up on the imacs screen...well from what i understand the imac's HD is supposed to show up on my mbp desktop...this never happens.And ive tried it multiple times...so i dont know what the problem is..and ive tried it using OS 9 and 10.0 the OS's the machine came with..
View 3 Replies
View Related
Nov 7, 2008
my problem is the following, I have an Ibook G3 which Disk Drive is busted. So i'm trying to install Tiger To it (PPC) by using Target Disk or Disk Target (w/e) mode connecting it with my Mac Book Pro. I restored the Ibook with the disk utility on the MBP putting as source the installer for tiger which I ripped off the img file from the the retail version I bought. And so I rstored it to the HD of the Ibook, takes about 15-10min(Maybe less) and done. When I turn on My Ibook it automatically boots into the installing of OS X process. Everything goes smooth until I get to the part that I have to choose the destination but I can't choose anything because the HD for the Ibook won't show, it doesnt show any possible destination for me to save to. I have read the read me files and everything on the software and about the option botton on the "destination" part but the botton cannot be selected. I read something about the formatt of the Ibook for tiger to work and I have it in "Extended (Jornaled)" and i'm upgrading it from Mac 9 classic, but the drivers for mac 9 aren't installed since I accidentally (w/o knowing) erased everything on the hard drive the first time I did this with the Disk utility.
View 4 Replies
View Related
Nov 25, 2008
I installed a new 250GB WD ATA hard drive in my 450mhz Sawtooth G4. The computer sees the drive, it works in target disk mode but nothing will install.
When I try to install Tiger from the DVD or the 4xCD set it gives an error after a minute of installing and says to restart. The Tiger disks crash my G5 as soon as I try to boot them. When I try to install Leopard via target disk mode from my G5 it says it cannot be installed on this computer.
This isn't one of the computers that has to have the OS installed in the first 8gb of the drive partition is it? I don't want to install 10.3, too much of my software isn't compatible with it. It was running 10.4 fine on the old 30gb drive.
View 5 Replies
View Related
May 18, 2009
my hard drive freaked out on my g3 ibook so i went to reinstall tiger on it...i can't get it to boot from an external dvd rom and start the instalation process...it gets a kernel panic and the only thing i can do is shut it off...is there anything that i'm not doing or is the hard drive fubar'd?
View 4 Replies
View Related
Dec 12, 2009
I have a 12 in powerbook with a non working cd drive. The problem is that my osx install died. I' pulled the HD from the machine and wiped the hd, and now is an unformatted hd. I go about installing osx without any mac computers, just my windows machines. Networking is an option.
View 1 Replies
View Related
May 2, 2010
I've got a Tiger Retail Disc that I've used on 2 previous machines without a hitch.Now, I urgently need to install Tiger on a 12" 800mhz iBook G3, yet after thirty minutes, it tells me to Try Again!Some erros tell me that there are essential files that can't be copied."Unable to copy package source file /System/Installation/Packages/Essentials.pkg/Contents/Resources/BundleVersions.plist"Some files for Essentials may not have been written correctly"
View 6 Replies
View Related
Nov 12, 2007
I have an external firewire drive and I made an iso of Tiger (from Original CD). I used Disk Utility to make what I think to be a bootable firewire drive.I selected the ISO as the source and the External as the Destination. When I hook up the external to the ibook and hold down the options key I have a gray screen with a refresh and and right pointing arrow.
View 2 Replies
View Related
Apr 18, 2009
i got a ibook g3 and i cant install my copy of tiger it is on cd and cant get it to boot it reads it fine if it is on desktop but not if i hold c or key it dose however boot in other macs
View 2 Replies
View Related
Mar 30, 2008
I've tried the 4 CD and single DVD retail versions of 10.4 on my G5 and all crash at the apple logo screen.
View 3 Replies
View Related
Sep 3, 2009
A friend of mine got an iBook G4 14" with a 60GB HD that wasn't working, so he exchanged the HD, but now he is not able to get the iBook up and running because he doesn't have the installation DVDs for Tiger or any other OSX
My question is, could I use my OSX installation DVD (Tiger) in order to install Tiger to his iBook and get it up and running? I have my original installation DVDs and everything that came with my iBook, but I don't know if those will only work with my computer, or if they're limited to be installed in one computer at a time.
View 8 Replies
View Related
Feb 7, 2009
so I have a very unique, bizarre problem. A friend brought her G4 1.67gHz 15" Powerbook to the office to have it looked at as it wasn't working properly. I took a look at it and found that one of the RAM chips was shorted out. I took it out and ordered her a new pair (since it was like $26 for 2gb, and with the one removed she was running on 512). Here's where it gets bizarre: I installed the new RAM and it was freezing regularly. I then took one out and it was still freezing regularly. I booted it from my Utilities partition (I have a bootable firewire drive set up to fix problems and recover data) and ran Disk Warrior, TechTool, and a whole heapin helpin of other fixin and optimization apps. I got it to fix all the reported errors, TechTool reports no hardware errors, everything should work perfectly. So now, the laptop boots to a blue screen. I can't boot it from a retail Tiger install disc, and I can't boot it from the hard drive, it just boots to the Apple logo, the Unix spinner, and then goes blue and freezes. So I set it as a firewire target drive and was able to do an archive/install of Tiger using my G5. It recognized and installed fine and it booted my G5. Ok, so it's not the drive. I restart and nothing, apple/unix logos then blue screen. Same with the Tiger DVD. I replace the original 512MB stick (the working one) and still same result. So finally I go back to my Firewire repairs disc and everything boots fine, all tests come out fine, drive is recognized and works fine, etc. What could cause a computer to boot, a drive to be bootable, but a computer not being able to boot on any installed drive?
View 2 Replies
View Related
Jun 30, 2010
I have accidentally deleted my system preferences which caused my computer to run into many different problems. I tried pacifist to get system preferences from the install dvd, but instead system preferences being a regular app, it just shows up in my applications with the "a" and a "pencil" icon.
View 17 Replies
View Related
Jan 19, 2007
For my job I have to VPN into our server--primarily to run RDC, but also to manage the Macs on the network (the company that set up the VPN provides the service for the PCs). When VPNing in on a Windows machine (and in Parallels), the connection is solid--no freezing whatsoever. Using Tiger's built-in VPN client, however, is frustrating as hell. It invariably hangs or times out if I leave it idle for between 15 seconds to a minute.
When it hangs I can usually disconnect and then reconnect again immediately (althugh it will remain as flaky as ever). I do not yet know all the details of the VPN on the server (a Windows 2003 server machine). I have a call in to the support company and am waiting for a response. In the meantime, however, I was wondering if others have tackled this problem with any success.
View 11 Replies
View Related
Jan 26, 2008
Ive purchased a used emac from a friend. 800Mhz, 256MB, 60GB HD, SuperDrive. Nice little machine for the kids. It has OSX 10.2 (Jaguar). I would like to upgrade it to Tiger. (wont support Leopard). My plan was to take my iBook license of Tiger, install it on the eMac, and then purchase Leopard license for my iBook. Would like to know if this is legit.
To see if this was viable, I tried to install Tiger on the eMac with the install DVD that came with my iBook. It starts up the install process, and the says that it cannot be installed on this machine.
Im not trying to circumvent anything. If possible to buy leopard for iBook and use it�s existing license on eMac that would be great.
View 3 Replies
View Related
Feb 20, 2008
I have an old PowerBook G4/TiBook 1Ghz and want to erase everything on the drive to start over with a newer operating system (it is currently running on 10.3.9). What is latest OS that can run on this old baby and how do I erase everything and start from scratch?
Here's the Hardware Overview:
Machine Model:PowerBook G4 15"
CPU Type:PowerPC G4 (3.3)
Number Of CPUs:1
CPU Speed:1 GHz
L2 Cache (per CPU):256 KB
L3 Cache (per CPU):1 MB
Memory:512 MB
Bus Speed:133 MHz
Boot ROM Version:4.5.3f2
View 1 Replies
View Related
Nov 10, 2006
I have a white 2.0 Ghz MacBook running Tiger 10.4.8 with the latest firmware updates, and 2 GB RAM. I also have an external IDE drive partitioned as FAT32, sitting in a relatively-no-name enclosure via firewire, daisy-chained through my Presonus Firebox external audio unit (I know, not ideal for recording). The MacBook's HDD also has an NTFS partition with XP residing there. Now, it all worked great for a month now, but this week I started having a strange issue. First I noticed that the fans started kicking in even though I wasn't doing anything special. I fired the Activity Monitor up, and indeed, the CPU load was at 140%. So I looked among the processes, and one named "Mass Storage" seemed to be frozen. The obvious, but perhaps a little dangerous, thing to do was to quit it, so I did.
The CPU load returned to normal, and I was still able to access the external drive just fine. So, now, whenever I connect the firewire drive, the mass storage process hangs. I quit it, and everything goes back to normal from there. The question is.. Why does it freeze, and also, what is the whole <i>point</i> of the 'mass storage' process if quitting it doesn't affect anything? When I plug the drive in, iPhoto launches automatically, and by the files that mass storage opens, I'm going to try and track down what's causing it to hang. The last file it opens on the list is /dev/urandom. Also, now that I think about it, FAT32 probably isn't the best filesystem out there. I do need the drive to be compatible with both OS X and Windows though. I suppose I could try HFS+ under OS X, and then using Mac Drive under Win to access the disk.
View 5 Replies
View Related
Aug 30, 2009
I went to BB and bought the upgrade for my MBP running Leopard but I decided I would try to install it on my Tiger running iMac almost possitive it would not work. It however worked and even installed faster (1/3 the time) of my MBP with more Ram and better processor. So it is definitely done
View 1 Replies
View Related
Oct 27, 2010
I have a dual 2ghz G5 that i wanted to clean off and start fresh. I wiped the drive with disk utility and tried to install os from tiger install dvd. G5 keeps hanging at install and also at disk utility. I've swapped both the osX install dvd disk and the entire dvd drive, but still hangs at os load or utility.
View 3 Replies
View Related
