When i turn on my G4 i get past the grey apple screen,then when it gets to the startup screen(blue background with the white box with Mac OS X written and the progress meter bar below), the meter bar fills up slowly then when full, it just stays on that screen with the meter still full(with the usual flowing blue bar style).
during startup, my powerbook will shutdown during the gray screen I've tried booting from an external drive. It goes to a gray screen without an apple logo.I've tried putting it in Target disk mode (to get my files off). But it won't mount on my desktop.Also tried resseting the pram as apple's troubleshooting suggested. nothing differen
to make a long story short, my first gen 17" G4 PB had its trackpad/power button cable severed a year ago, forcing me to remove the battery and memory door each time I need to start up. It's been kernel panicking a lot in the last few months, but always restarts fine. Tonight, on startup, it could not find the HD, and the logo shifted from happy mac to question mark and back. Is my HD toast? I know the comp is totally doomed and will be getting a new MBP when they come out (if they come out...), but I had wanted to keep the Powerbook in order to do a firewire transfer of files to the new MBP I get. Can this be fixed? Can the HD be mounted in an enclosure?
The sound on my 17" G4 Powerbook does not seem to be working any longer. I know there are some similar threads but I think my problem is slightly different because I get sound on startup (the startup chime) then when Leopard loads it seems to be dead.
When I press the volume keys (F4/F5) I see the volume indicator increase/decrease but I do not hear an alert sound.
When I go into System Preferences/Sound, "Internal Speakers" is grayed out under "Sound effects" but "Internal Speakers" shows up under the Output tab.
When I plug in headphones, I get no sound.
I've tried resetting the PRAM and open firmware.
I've tried creating a new user and the new user also has no sound.
I've tried repairing permissions, running disk warrior while booted from another drive, and a disk repair in disk utility, as well as fsck-fy and also clearing the cache files with applejack.
I am runnign Leopard on this machine, version 10.5.6.
I though it was a fried/disconnected sound card or a logic board issue until I realized that the startup chime was playing just fine.
Also, whenever I press the volume keys, I get the following error in system.log
Hi, just wondering if anyone could give me some diagnostic tips with a very unhappy powerbook. I�ve tried the Apple support pages, but they didn�t do the job so I thought I�d look for some helpful experts � I will be immensely grateful if you could help me figure out what�s wrong.
It�s a G4 Power book, running OS 10.4. It suddenly froze on me one day, so I held down the power button to reboot and it hasn�t worked since. One thing that I guess could be relevant is that it was pretty much out of disc space � it had flashed up the warning a few times in recent days and I was in progress of doing a clean up when it went.
What I�ve tried so far:
Normal power up:
Result: Chime, apple logo and spinning logo appear. Stays that way for 4 mins, until screen goes darker grey and �You need to restart your computer. Hold down the power button for several seconds or press the Restart button.� message appears.
Safe boot (with progress status) � power up holding shift-command-v:
Result: Chime, apple logo appears, nothing else. Stays like this for ~30 mins until I give up and power down.Reseting PRAM and NVRAM � power up holding command-option-p-r
Result: Chime, then restarts and second chime, then does exactly the same as the normal power up.
Next step recommended by the Apple Support site is to start directly from the OSX installation disc � but my powerbook already has a CD inserted which I am unable to eject.
Any tips � how can I eject? Could the safe reboot take more than 30 mins (bearing in mind it didn�t give me any progress indication)? Anything else I should try?
I am leaving for a week long trip and many parts of it will not be able to run the computer off of the powercord, which is a problem because I get about 40mins of wordprocessing use out of it when I run the battery alone. Can someone explain what the significance of these levels are for my Powerbook G4 15'' (Alm) 1.25GHz, namely the cycle count and full charge/remaining capacity?
My two year old Mac PowerBook G4 will not start up. It will turn on but it never loads past the gray screen with the apple logo adn circle loading thingy. it probably has a technical term but I have no idea what it is. Do you know what may be wrong with my computer or how I could fix it?
My 12 inch powerbook does not start up. Instead it loads to Darwin. I have an install disk from a 15 inch powerbook G4 and I would like to know if using this would work on my 12 inch powerbook G4?
My Powebook G4 12" (model A1010) during its start-up phase remains stuck on the "initial gray screen" without displaying the apple logo. However, I can access the system through the console provided by Open Firmware.
I would like to ask you what could be the problem and where such problem may reside (hard drives, memory, main board, etc).
My brother's iBook G4 (I think it's a 2003 model) has a problem with the screen. When the computer is turned on, the screen stays black, although the backlight is on (the apple glows). Sometimes, on start up, the screen works normally for a random amount of time before going fuzzy and then black again.
Any ideas on how to fix this? Is it likely to be a problem with the hardware in the actual computer, or just the screen? Or is it a software thing?
I have a Powerbook G4 1.5 w/ 1GB of RAM and the stock 80GB HD. I've run this puppy pretty hard for a couple of years now, and it's lately started to lag a bit - perfectly natural. I was considering buying a new notebook but I've decided to wait until after Leopard comes. So my question is:
1) How do I determine the max RAM I can put in this machine? 2) Are there are specific specs I need to be concerned with when swapping out the Hard Drive? Any type, size limitations, speed limitations, etc.
I'd love a little input as to how I find out this info. I think instead of taking the notebook plunge now, I'm going to put a nice new hard drive in this one and possibly bump up the RAM a little more if it will take it.
So is the is Powerbook G4 802.11g or b? it is the 1.25GHz model. Also, one thing I don't understand regarding the airport extreme or any airport for that matter: isn't the maximum speed going to be completely determined by how much the cable provider, Comcast, pumps out?
If this is the case, how do I determine what my transfers and speeds are looking like specifically for Comcast? And, how would an airport extreme improve upon this or any other performance aspect in this regard?
Powerbook G4 (Ti-book) 667 mhz, 512 mb RAM. I finally after YEARS upgraded my OS (10.4.10), yay me! Just bought Adobe CS3 (for the new IMAC we have yet to buy), but I would like to install it on my Powerbook. SO, it it time to bump up to 1GB RAM. I was told it was tricky, and I should take it in to the apple store to install, but then I took a look under the keyboard, and it looks pretty simple. i have installed new RAM on a G5 tower, and this looks way easier. So, I am planning on buying the RAM either online or at FRY's, then installing it. BUT, I know I have to be careful of what type of RAM to buy. I found what I think will be good at [URL] but I will have to buy 2 (512's) as mine currently has 2 (256). I guess I just want to make sure I am not going about this the wrong way before I drop about $200 for RAM upgrade...
I have a 15' Powerbook G4 1.67, currently with 512 of ram....so i'm shopping for an upgrade, but not sure which specific type to go with. In my system profile it says i'm running..
Type: DDR SDRAM Speed: PC2700U-25330
And these are the types i've been seeing to choose from.
I just bought a used 12" powerbook G4 1.5ghz and I want to add some ram to max it at 1.25Gb. Did anyone try to use ddr400 instead of ddr333 on powerbooks? In theory it will run at 333 like in any pc, but is this flawless in powerbooks? Because ddr333 is expensive nowadays.
I know the powerbook is rather archaic now, but I'm trying to get a new Macbook and don't want to throw my old powerbook away. So.. I have a friend who wants to buy my old G4 Powerbook with 60GB capacity, 512 MB memory, 1.33 GHz cpu speed. It's extremely worn in, meaning, it won't last more than 20 minutes off the power cord, but someone could always replace that. So what would be a fair price to charge someone to take it off my hands?
I bought a powerbook G4. The ram is 512 mb but i want to upgrade that. Is it possible to place two 1gb cards in each slot. That i have a total of 2gb ram? Me was told that the max of the powerbook G4 is 1 gb. Is that true? And when it is true, is it smart to buy a total of 1gb for the powerbook g4? Or doesn't make that any difference?
I believe the hdd is dead so I need to find a replacement but I've no idea which cause there are 93487534231 kinds. Only thing I can really find via googling is that it has to be a 2.5" ATA but there are several different kinds of ATA hdds... so confusing. I was thinking this? [URL]
Just replaced the logicboard on a 01' Powerbook G4 Titanium Onyx and I'm getting the no video/beeping sound after the chimes upon power up.
3 beeps 3 lights (1 long + 3 quick flashes)
I don't THINK it's the RAM though, I thought these cards were good before the computer fried. I've swapped the two 256MB cards with each other, also plugged just one RAM card in both slots one at a time--still no turn on and I get the 3 beeps. Unfortunately I don't have any extra 144-pin 133 Mhz SDRAM chips laying around or i'd just test them. It seems unlikely that both RAM cards would be broken, in addition to the logicboard frying, unless the two events happened simultaneously. Previous install had the 667 Mhz upgraded processor and when I took the logic board out it was fried on the bottom with lots of corrosion/leakage on a good 5% of the surface area. Anyways, I replaced it with a 550 Mhz board. Could the beeping be from installing the different processor or is it more likely that I simultaneously fried both RAM chips plus the motherboard?
I am kind of new to the MAC world... I once had the really old ibook with the handle a long time ago..and I never got a new Mac due to some problems I faced!
But now, I want to go back to MAC because many things were developed and I missed using a Mac! So, now I am confused between the Powerbook12 inch or the White Macbook 2Ghz ? I really love the size of the Macbook but I am worried about the intel processor...?
This is ridiculous. After I went out and got a new screwdriver to install my 1GB stick of RAM, which I got off of Newegg, it is now not recognized by my computer. So now I'm running with 256MBs of RAM. Beautiful, thank you Apple.
[URL] This is what I ordered...Crucial Technology 1GB 200-Pin DDR SO-DIMM DDR 333 (PC 2700) Notebook Memory - OEM
I thoroughly made sure this was the right RAM, and even people with my same type of computer have said it works on their posting thing.. 1.5 GHz PowerBook G4 15". Anyone know how I can get this to work?
My PowerBook 12" 1.5G has 100% CPU usage when playing back the new TV program from iTunes store. And sometimes it even choke.
While I have no virus scanning software, some programs running such as Opera, iTunes, Entourage and have about 20% CPU usage when idle.
Why is it so slow on a PowerBook while you can actually play that video on an iPod? Is it the iPod too powerful or it is just because apple did not optimize enough for older Macs (pushing people to new hardware)?
I have just ordered a new iMac but I am not happy about my PowerBook which is just one year old.
I have an older 15" G4 Powerbook (before the recalled Powerbooks with the RAM slot failures) that has recently been experiencing some speed issues. To my dismay, when I checked my 'About This Mac...' I no longer had 1GB of RAM, only a lowly 512 MB. Tonight I sat down and started swapping and removing my two sticks of RAM and as it turns out, something is up.
With a 512 stick in the lower slot, System Profiler tells me I have 512 MB of RAM and that the upper slot is empty. When I put the other stick in the upper slot (leaving the lower one in), System Profiler now says I have 512 MB of RAM and that the lower slot is empty. Does this look to be a (out of warranty) logic board failure? Is there anything else I can try to do? On a related note, when removing the screws from the RAM panel on the bottom of my PB, one screw fell into my Powerbook, never to be seen again. Is this going to cause any problems down the line?
I restarted and nothing. Still dim. I can barely, barely see things like if I hit expose, I can see shifting rectangles.
Also, I've been having this issue where the keyboard mostly stopped working -- if I hit kjjh, it'll come up as 3443 or something. It's usually fixed with a restart.
I have it covered by a year of applecare until feb 24, 2007 -- but I haven't registered it yet. Should I register and then call apple or what?
This comes at a REALLY bad time. I have design projects coming up everywhere and of course, despite my $250 external hard drive, i haven't been backing things up because I'm an idiot.
Can I hook it up to a external monitor just to make a backup of my hard drive?
My Friend has a 15" Powerbook (2nd last rev.... 1.67ghz with lo-res screen) and it's been on the fritz lately. It operates completely normal and then it suddenly goes to sleep. When I wake it up it's back to normal just fine. It goes to sleep after about 3 minutes of use.
I recently replaced my 12" PowerBook G4's 60 gig HDD (due to failure) with a 80 gig HDD (TOSHIBA MK8026GAX).
I'm now running out of space and am looking to upgrade to a 100-120 gig HDD (and put my existing TOSHIBA MK8026GAX HDD in an external FireWire caddy).
After research, my two options are: 1 - TOSHIBA MK1234GAX, 2 - TOSHIBA MK1032GAX. Both offer good performance in my price range.
Option 1 is a 120 gig HDD with a 8MB buffer. Option 2 is a 100 gig HDD with a 16 MB buffer.
Obviously I would like as much space as possible with the best performance. Would I see a large drop in performance going from a 16 MB buffer to an 8MB??
All the drives have similar specs (seek times, etc), besides the buffer being smaller on the 120 gig HDD.