I have the Power Mac G5 Dual Processor 2.0 GHZ, with 3 GB of RAM, but I would like to upgrade but this model only has four slot, not 8. On the logic board, I can see little holes where the other 4 slots are meant to be, but obviously they aren't there. Is there any way to upgrade this G5 so it has 8 slots, rather than 4? I haven't found anything about this on the Apple Discussions, or MacRumors.
View 7 RepliesDoes anyone know the exact name and part numbers for Wireless upgrade kits for the following machines:
G5 Dual 2.0 ghz - (main board has 8 slots for RAM upgrade)
Mac Pro Quad 3.0ghz
I've been searching around in circles trying to find this out and I'm just getting no where!
Is it possible to upgrade G5 Dual 1.8 and add extra DIMM slots??
Info:
PowerMac, Mac OS X (10.4.11), Dual 1.8
Ok, my problem is as the title states. Why is this happening? My motherboard had 8gb slots and is compatable with 8gb ram. I installed 8 dimms of this ram I bought from newegg: [URL]
The other day, I put more ram into 2 12-inch ibooks - my own 1.0 ghz, and my wife's 1.33 ghz (Yes, I know she has the faster machine. It means I'm the next to upgrade). Anyway, this is the first time I had opened them up at all and I saw something that confused me: I know that ibooks have only one available expansion slot for ram. That's what I saw on mine. But on my wife's, it looked like there was a second slot lower down, just below where I installed the ram, but missing the clips to hold the ram in place.
Is this in fact a second ram expansion slot, or is it just the shape of it that makes it appear to be one, or is it a second slot that is somehow unsupported or unable to be used? My guess is that it's just the shape of the hardware, and it only appears to be a second ram slot, but isn't really. But wouldn't it be sweet if there was in fact another usable slot in the ibook?
can I use 2-2GB RAM modules in 2 slots and 2-4GB modules in the other two slots, or do all 4 modules need to be the same size?
Info:
iMac, Mac OS X (10.6.8)
I curently have 10.3.9 with a PowerPC G4 dual w/ 1.25 processors and 2 gig of ram. I want the highest upgrade I can get that will be compatibe with my software which is:
Quark 6.5
Acrobat 7.1
Acrobat Distiller 7.0
Illustrator CS1
Photoshop CS1
Microsoft Office (don't know what version but I've had it for years)
I really can't afford to go buy all the software again and I don't want my system to crash. Any suggestions?
This upgrade is mostly spawned due to the recent purchase of a new iPod Nano... Not supported by my current OS! Man, I didn't read the requirements, shame on me. However, the dang thing will work on my kid's PC w/ XP Pro. I only got the Nano cause it's mac - he wanted the Zune that ONLY works w/ PC.
simple Q: I know these slots can be used for GPUs and sound cards, but what other uses are there?
View 16 Replies View RelatedI have just bought this RAID controller:
[URL]
When trying to install it I found my Quad core mac pro only has PCIe slots, of which I can see anyway.
Is there any way at all to connect this to my mac?
i'm looking to upgrade my ram with some memory from crucial and was just wondering if both slots are used for the standard 2 gb my uMBP came with?
also, is it worth going to 4 gb?
Someone else pointed out in another thread that on the 11" MBA with 4 GB, if you look in System Profiler under memory, the software says that there are two RAM slots. I can confirm that on my MBA. So:
1) Is the same true on the 13" with 4 GB RAM?
2) Has anyone published a tear down of a 4 GB model just to be absolutely sure that there is only one soldered RAM slot? (I know it's unlikely that a second one got crammed in there, but I'd just like to see the tear down picture)...
I noticed on the Apple refurb site that Mac Pros from 2010 have either 4 or 8 memory slots. Is there an easy way to tell how many memory slots a computer will have? From what I have seen it looks like the quad core machines will have 4 slots while the eight core machines have eight slots. How many memory slots are in the hex core machines?
View 4 Replies View RelatedI'm transferring my OX onto a new hard drive so am going to move the slots so the new main HD is in Bay 1.
Do I physically move them all first, then restore using the disk utility or do I physically move them after restoring?
In physically moving a hard drive are there any settings that need changing?
Currently I have a GTX 285 in Slot 1, and a GT 120 in Slot 3. Slot 2 is the faster slot, which I would think would benefit the GT 120, but then it's closer to the GTX 285 that leads to overheating concerns. I'm going to run anything graphics intensive on the GTX 285-connected monitor, so any real drawback then to having the GT 120 in Slot 3?
View 4 Replies View RelatedHow many memory slots are in the 3.06 27 incher, and how many slots are taking up on the basic setup? If there are four slots, are all four slots filled with 1gb cards? Im curious because I ordered my iMac from my job here, and I also ordered 2gb of memory, thinking I can go from 4gb to 6gb of ram. I was going to order a 4gb card, but it was 200 euros at my job. If anything, I will order a couple of more 2gb cards, but that all depends on the number of slots available/open.
View 7 Replies View RelatedI have a 27" iMac and recently picked up the latest model MacBook. I also picked up a 4Gb (2x2) RAM. I placed the 4Gb in the MacBook and decided to place that 2GB from the MB in my iMac to boost it to 6GB.
Here is my question, did I place the RAM in the best slots, assuming there is such a thing as best slots. I remember from the old day of PC that there was a strict order for placement else I may not get the most out of the additional RAM. It does register as 6GB when I click on 'About This Mac'. Below is a diagram and screen shot to show exactly what I did.
I just purchased new ram to add to my 1.6hz G5, it has four dimm slots. I am aware of the pairing and slot requirements and believe that all is well there. I added the new ram to the two outside slots, these are numbered 2 and 3 by Apple and the original ram is in slots 0 and 1. The new ram was not recognized. I then swapped and put the new ram in slots 0 and 1, the old in 2 and 3, and the new ram was recognized but not the old ram. It appears that it does not recognize ram in slots 2 and 3, how do I get this to work?
View 6 Replies View RelatedI have 1 gig sticks in each of the 8 slots. I recently became aware that I am only accessing 6 gig. System profiler tells me all sticks are ok:
however, it is showing 512 sticks in slots J13, J14, J43, J44. (Again, they are in fact 1 gig sticks). Apple Hardware test implicates J14 and J44, with this error message: post/0/2048 DIMM3/J14, DIMM7/J44
By various means I have determined that my memory sticks are fine. I've swapped them out and tried them in various slots. The sticks in the bad slots work fine in other slots, etc etc. So I'm certain it isn't the RAM. Also, they are paired correctly.
I have 6 -1GB DIMMs installed in 6 of the 8 slots. Can I install larger capacity DIMMS in the remaining 2 slots?
Info:Mac Pro, Mac OS X (10.5.8)
Will the stock Mac Pro video card: NVIDIA GeForce 7300 GT, work in a PowerMac G5 Duallie 2.0 (mid 2004 model) with the pci-x slots? would a Cube G4 Rage 128 video card work in thePM G5? (I bought a G5 without a video card and I need to test it and find a cheap video card for it).
Information:
17" MacBook Pro 2.16/120/2gb ram
Mac OS X (10.4.10)
Mac Pro 2.66, 250 & 80gb hdd, 2 DL-SD, 7gn ram, APX & BT
A G5 PPC Dual 2GHz that I am working on freelance for a client apppears only to have 4 RAM slots - could this be the case? I thought that from the 1st Generation onwards all G5s contained 8 slots.
Information:
G5 Dual 2GHz PPC
Mac OS X (10.4.10)
FCS 2 - FCP 6.01, Motion 3.0.1, DVDSP 4.2.0
I'm installing some firewire cards in a mac pro at my school but the Mojo that we're hooking up needs to be on it's own bus. Do certain pci slots share a bus together?
View 4 Replies View RelatedAll of my used ID and password slots have turned black. I can't see what I am writing and evidently I am making mistakes because they are being rejected. How can I return these fill-in-the-blanks to white backround?
Info:
iMac (24-inch Early 2008), Mac OS X (10.6.8)
I have a few questions about upgrading my mac in order to use the new iPod touch 4th gen (requires 10.5 or later).
First, here's what I'm working with:
I have a PPC G4, dual processor 1.25 GHZ, 80GB HD, 768mb RAM, running Tiger 10.4.11. I use CS2 for freelance graphic design (and very occasionally Quark 4 on OS 9). I have 2 external hard drives backing up my system, storing personal files, photos, music, etc. Yes, I've got an oldie, but it's been cranking out loyally over the years with tune ups and TLC, and I need it to live on a while longer.
1. Can I upgrade to Leopard 10.5 (not snow leopard) and still use my CS2 programs? From what little information I've been able to find, the answer is most likely yes, but with quirks and decreased speed... which I can deal with. I simply cannot afford a new mac (nor the software upgrades required once that happens), so I need to work with what I've got.
If the answer is yes, then...
2) are there any other updates in between 10.4.11 and 10.5 that I will have to purchase before upgrading to 10.5?
3) Also, since I will have to upgrade to a minimum 1GB RAM, can anyone please suggest a good site to buy it from? There seems to be a million options out there. I know that I should really have more RAM anyhow with what software I am using.
I'm new around here, and am looking for some advice! I have a G4 Powerbook, which I love. Sadly it's hard drive just died, and I need to get a new one. My HD was originally 80 gigs, but I'm thinking I'll get a bigger one this time around. I'm thinking 200GB, if I can. I won't be upgrading until next month (as I'm abroad right now) though I assume I should buy the hardware as soon as I can, since I know the older a machine gets the more expensive it's parts become.
Are there any specific brands/stores that I should especially consider? I'm also hoping to buy more RAM (I have 1GB now, and I THINK the most I can get on my laptop is 1.5GB, can anyone please clarify?) If anyone could suggest any other ways I'd be able to soup up my laptop, I'd be very grateful if you could share them for me! If I'm leaving out any specs that I need, just let me know.
Scored a Power mac G5 1.6Ghz for FREE, it was going into the dumpster at work! I've been jonesing for a Mac to play with iWEB 09, so I've figured out I need the upgraded OS. Did I order the right thing? MAC OS X 10.5.4-MEDIA SET. I gather this is the 1st G5, seems to run nicely, any suggested upgrades? I'd like to run entourage an office as well as IWeb?
View 2 Replies View RelatedNeed link to the article referenced here:
[URL]
Toms Hardware apparently ran a benchmark comparing two 3870s on x16 vs two 3870s on x8 (hence a Mac Pro 2006).
I am going to buy an Imac soon. Most likely the with 4 gig ram. I was just wondering how many memory slots does an 24 inch Imac have. Because I have 2 one gig ram sticks that I wanted to add to it and didnt know how many free slots it would have.
View 6 Replies View RelatedHow many memory slots does the iMac 21.5-inch:2.5 GHZ base model have 2 or 4?
View 4 Replies View RelatedMy buddy just gave me a B/W PowerMac G3 with a Sonnet Tech G4 1GHz upgrade kit and OS X 10.4.10.
I've been wanting to setup a proxy to bypass the content filters on the WiFi networks I find on the road. For instance, I can't go to the iPhone Dev Team website with the network I'm currently on.
Do the parts exist to also turn it into a Gigabit +Draft N router? It would sure be nice to kill two birds with one stone.
I don't know anything about setting all of this up, how would I go about it?
