my Ibook sees the network, but refuses the password, same for my husbands iphone, although my iphone still connects.tried relaunching the airport twice, no change.
tried changing airport settings, no change even triend to make it open network, no possibility to connectit seems that my ibook doesn't save the changes...
and even when putting everything back as it was, it still refuses my password to connect to the airport.
My iBook G4 is refusing to turn on. Yesterday it started going really slow and pressing the power button wasn't bringing up the usual options, so I held the power button to switch it off. On turning it back on it got stuck on the screen with the Apple logo and spinner for a long time so again I powered it off with the holding of the button. I then let it cool down (it was really hot) but now when I switch it on the spinner spins around 6 times then it turns itself off. It is still chiming. I'm away from home and don't have any discs - anything I can try or is it time for the Genius bar?
I have a iMac G5 with an Airport Extreme Card installed and an Airport Express Base Station. I have set a password on it and it is working fine on my G5.
I also have a G3 Clamshell iBook with OS 10.3 on it and an Airport card installed there. In my last home, it was able to connect to a default network without problem, but I have never been able to connect it to the same network as my G5. I enter the password and it says thet the password is not recognized. I have since moved into a new house and the only network that shows up is the one from my house (no default anymore and I can't get access to the internet.
I know the card is working since it picked up the default in my last place, but am wondering what I can do to get it to recognize the password. Should I reset the Airport Express. Do I need a more current version of OS X to run it than the OS 10.3 (I haven't updated the software as I just installed OS 10.3 from OS 10.2 last night and didn't have the connection to be able to do a software update - I could just plug it into the ethernet and do it if I need the update.
I don't want to leave it without a password. We are the only people right now in a new sub division but there will be people moving into the area soon that I don't want jacking my internet service.
I can't get our G3 iBook to connect to our AirPort network anymore. It's the last-gen AirPort Extreme base station (domey type with a modem) and I've successfully used our wireless security in the past. We use WPA/WPA2 Personal with a 40 character password. The iBook has worked before with this configuration, and it works when there is no security set up, but even though our town is filled with computer illiterates and there are only 2,000 of them, I'd like security.
I connect two desktops and the subject ibook to an airport base station. The ibook is a 1.2MgH, 30GM hard drive, 256 RAM. The laptop has been in use approximately two years. The laptop has always automatically connected to the airport. Yesterday morning when I started the machine, it indicated it was not connected to a network. When I selected my network, it asked for the password. When I input the password, it told me it was invalid. Nothing I've been able to do with any utility or any other corrective action has changed the message "invalid password." And just so you know, I am entering the correct password for my network.
all other machines have no problems.It worked earlier in the day-put to sleep-came back- now it can't something is wrong with network settings but nothing changed. Two PC's are connected to same cable/Airport base station wirelessly with no issues it's just my machine. I've rebooted a few times-that didn't help. i can get my macbook's airport to work with my wireless aircard so it's not my the internal wireless modem, it's got to be my wireless settings for the airport basestation itself-but nothing chagned in those few hours it was asleep? I have been having issues for a few weeks requiring that I run diagnosis on this home wireless network connection, but it usually gets resolved and coems back on-now it seems gone.
Info: MacBook Pro (15-inch Early 2008), Mac OS X (10.6.8)
I have my Gmail account set up for IMAP, and use it in Mail. However, as of this morning, Mail can't connect to either the IMAP server or the SMTP server. Whenever I try to connect to the IMAP server, it gives me the following error:
"The server '[URL]' refused to allow a connection on port 993."
I've checked repeatedly and all of my settings are as the Gmail website says they should be. Does anybody have any idea how to fix this?
So, I need wireless on my iBook G3.. Airport cards go from pretty much 55-80 USD, and are only 11mbps.. should I be worried? My connection I believe is 8mbps..
But the thing is, doesn't wireless work where just because it sends at 11mbps, doesn't mean you really get 11mbps.. With interference you could get 1mbps, compared to the potential 5 or so with 54mbps..
How is the signal strength with the original airport cards? I'm going to be pretty far away.. so want to make to sure i'm not going to disconnect and reconnect all the time..
So, the other option is USB.. most now go for about 40-50 with 54mbps.. now i've heard bad things about kernel panics, and just overall frustrations.. anyone have one that works well..
I'm going to purchase an old iBook 700MHz and I know it's possible to remove it's wireless AirPort card, but it will the iBook run okay without the network card in place?I want to remove it but the Apple support docs have the following disclaimer:Warning: Never turn on your computer unless all of its internal and external parts are in place and it is fully reassembled. Operating the computer when it is missing parts can damage your computer or cause injury.
I recently signed up for AT&T u-verse. As part of that service they provide you with a 2wire router. Initially my MacBook Pro (running the most recent osx) was connecting to this router fine. But, because i like the interface of my Airport Extreme router better, i decided to run a router-behind-router setup, to set up a network with my airport extreme. In other words, i ran a hardwire out of the 2wire router into my Airport Extreme, thereby allowing the airport extreme to disperse wireless signal as well. Therefore, there are currently 2 wireless networks in my house, one being dispersed from the 2wire router, and the other from my airport extreme. Both wireless networks are password protected in WEP-2.
Now i can no longer connect to the 2wire router. Everytime i try to do so, the system prompts me to type in the WEP password for the 2 wire router and upon doing so, it indicates that the password failed, the connection timed out, or that the connection failed. I've monitored the network preference pane as i'm trying to connect, and it invariably indicates that there is "NO IP ADDRESS" for the 2wire network. In fact, i can no longer connect to ANY OTHER wireless network which is password protected. It always gives me this same dilemma. The only password protected network i CAN connect to is my airport extreme network. Does anyone know what the hell is going on here? I'm completely baffled. I've gone so far as to delete all preferred networks from my system. Delete all network related passwords in the keychain access. and also to delete my network related preferences in Library ---> Preferences, to remove any 'confusion' the system might be having, but to no avail.
my teacher asked me to help him with a wireless internet problem. (I'm the only one who knows anything about Macs.) His iBook used to be able to connect to the school's wireless, but up until the techie "changed something with the wireless" he hasn't be able to get on. The iBook is the dual-USB version 700 MHZ G3 with 10.3.9 installed. He states that it will connect at other places, like his house or coffee shops. I don't know what could be wrong. I'm guessing it has something to do with a different kind of WiFi signal. The iBook gen he owns has 802.11b.
I'm a college student and I live on campus during the school year. When I'm at home, I can connect to the internet just fine. Anywhere I go, I don't have a problem. But starting this year, I cannot connect to the Internet on campus. I live in the on-campus apartments and I cannot connect to the residential network there using ethernet. We have a wireless router in our apartment and that won't work for me either. At best, I can sign into the residential network using my school account and I can get on one or two websites before "Safari cannot find server".
I have been using my ibook g4 to connect my xbox 360 to the internet. I have an ethernet cord connecting the two together. just recently, after doing this for months, my ibook will randomly disconnect from the internet. the computer's wifi signals say it's connected but nothing works including ichat, and safari. the internet on xbox also stops. i try resetting my computer and unplugging the ethernet, and the only thing that works is resetting our router.
I need to reseat my Airport Extreme card and I don't know where it is or how to do it on this "mid-2005" model. Please point me to the appropriate URL that has diagrams. For some reason, the "mid 2005" g4 iBooks have a different Airport card removal and replacement procedure than the earlier models. Because, I suppose, airport cards were standard, i.e., not optional, with this model, the install process is not included in the manual. But you'd think that all I'd have to do is search the Apple site for "g4 ibook 1.33 airport card" or similar keywords and the instructions for removal and installation would be returned. Ha! and Double-Ha! Here are the official results of the above keywords:
I have an 'old' G4 Imac (usb 2.0) with a pretty sweet audio setup that I can hear throughout my house. I just ordered and old school clamshell ibook (se) mostly for writing papers on the go. but I was wondering if any one knows how I can use it as a remote control (over airport) to skip songs on my IMac. This must be possible somehow. I cant afford an airport express right now.
I sort of, well, inadvertently bought an old Clamshell iBook on eBay on Christmas Day (when I'm bored, I make lowball bids on things - this was one of the rare cases where I won). The model I got is a 300 Mhz with 96 Megs of Ram - but it also has an Airport Card (which, really, was, itself, worth the price I paid for the thing - it was a really good price).
I've got an extra 256 Meg chip laying around - will the Clamshell recognize a PC133 chip? Or will it have the same problem as Lombard and only see half the memory? Also - am I better off putting, say, Panther on it, or should I do a clean install of OS 9.2? I never really used OS 9.2, what's the functionality like in terms of Airport - am I going to have trouble connecting to modern networks?
iBook G4 shows that the airport has full connectivity (full bars) yet it doesn't connect and states that there is no IP address. The iBook connects using its internal airport to a Netgear Router. There is a PC that runs windows that is connected to the cable modem. For a month or so both computers were able to access the internet simultaneously. All of a sudden the computers are unable to access the internet at the same time. When I attempt to connect at the same time my Mac gives me an error stating that another IP is in use and so I can't connect.
How can I give my iBook an IP address so that both computers can be online at the same time?
I have an old G4 iBook that has bitten the dust after some coffee got spilled on the keyboard. I also have an old iMac G5 that was purchased WITHOUT wireless. 1. Can the iBook airport card be installed into the G5 iMac?
yes, I think my wireless card is locking my ibook up. I have tried this on 2 browsers, and still gets locked up. I am usually using tabs (only 2 or 3) with the window maximized. I turned it off and looked at the connection. Noticed that the cord connecting the card might be crimped, so unplugged it, re-positioned the cord so it wasn't touching the metal bracket holding the card in place, and still the issue persists.
I need help from someone please. I just placed and airport card in my ibook g3. I am running os 10.2.8. I am using a linksys wrt54g router. I turn on the airport. Then I attempt to connect to the name of our network and type in our password. I end up getting a message stating that the password entered in not correct for the selected airport network.
I have been a mac user since 2006. Yesterday, I purchased an iBook G4 for my father, who I have converted from Windows to Macintosh. We are 99% satisfied. Everything works great except the wireless internet. Whenever the computer shuts off or goes to sleep, we have a difficult time re-connecting to the wireless internet. After five minutes of clicking on the wireless signal (at the top of the screen) and turning it on and off, we are able to get on. Once we connect, it does not seem to disconnect.
