PowerPC :: Connecting G4 To Plasma Via DVI To HDMI
Jun 23, 2008
Trying to connect my g4 to my new 50" plasma via dvi to hdmi and wanted to know if anyone has had any trouble doing so. Will a standard dvi to hdmi cable work? Should I worry about resolution or killing my video card?
I want to watch movies from my hard drive or disc drive of my Mac is OS X version 10.6.5 3.06GHz Intel core duo 4GB 1067 MHz DDR3, on my panasonic viera plasma tv.
I connected my macbook to 46" 1080P plasma tv, everything was fine at the begining, but after I used it for 20 mins, sometime 10 mins, hdmi signal drops(black screen on TV), when I unplug and plug in again, it works for another 10-20 mins.
I've been trying to connect my mbp (older model) to my Hitachi plasma TV via S-video. I have the Apple DVI to video adapter and the first time I hooked it all up it looked great. The next time, and from then on no matter what I do the picture on the TV is in gray scale (LCD is still color). I've gone into system prefs and tried every setting in there I could find, and even tried to calibrate it using the calibration assistant. Nothing. I've also tried different inputs on the TV (the two plain video ports there are), as well as tried adjusting every imaginable video/color setting I could find on my TV. I'm completely lost at this point. I've also tried different video cables and of course fn F7.
I'm having a problem when I connect my 42" Plasma HD to my mid 2009 Mac Mini, the mini cannot connect to the internet via Airport. I have a 20'' Dell display connected to the Display port and the Plasma connected to the mini-DVI port and I'm running snow leopard. When I disconnect the plasma from the min-DVI port all goes back to normal and there is no Airport issue.
I got a DVI-to-HDMI cable from the Apple store, the employee there said it was the best way to connect my Macbook (older model) to an HDTV. As it turns out, HDMI carries both video *and* audio and unless I'm mistaken, my TV doesn't have associated audio jacks for either of its HDMI inputs. Is there a way around this, or is HDMI not a useful way to connect a Mac to a TV?
I was wondering how what cable/s I need to connect my mbp mid 2009 to the tv. I want to connect it via HDMI, I can't find any cable in the apple store for mini dvi to HDMI, is that even possible? What cables do I need to connect the mbp to the tv with HDMI?
When I connect my MBP to my TV(an LG 42LBX) using a DVI-HDMI cable, I can't get a good picture using 1920x1080. It works fine on lower resolutions and the colors are perfect. But when I set it to 1080 it becomes all washed out (See picture at the end... I made it in Photoshop but that's pretty close to what I see on my TV). Also, it is only letting me use 1920x1080 interlaced. Why? Is my cable bad, or is it something with my TV or MBP?
i just bought a DVI to HDMI cable, to plug my macbook pro to my big samsung tv. I successfully connected them to eachother, but there was only 1 problem which ruins the whole experience. There are weird fuzzy colours all around the screen and is almost impossible to see anything.
Here you can see the DVI cable plugged in the MBP:
And on the tv screen everything looks messed up:
this is a brand new cable so i don't think it would be the problem, im only afraid maybe my DVI input would be broken.
When I connect my macbook air to my television with a HDMI and minijack I get no sound ... Why is that? Other computers (including macs) work with my television that way.
Is it possible to connect my 360 to the mac via hdmi display port? I have hdmi to display port already and I have a new macbook pro so it does support audio, Basically I want to play with the screen,. Does mac support input through the display port?
I am looking to connect my new Alu MacBook to my Television. I was just wondering if anyone can help me out as to what cords to buy in order to do that.
I am trying to run my new Macbook Pro as a media center. I ordered a display port to HDMI adapter which should arrive shortly. Will this drive audio through the HDMI? If not, what is the best way to get audio from my Macbook Pro to my home system to play through my speakers?
I am new here, I have been watching the forum but have not needed to post until now. I have a june 2.8 MBP running snow leopard and I am having problems with Mini DP to HDMI. I have a convertor to go direct to hdmi from mini dp but when I use it to watch movies the color is really dark. It is almost unwatchable.
It is not a hardware thing because when I boot into windows 7 I can watch the same file with the same hardware with no issue with darkness.
I was wondering if anyone has come across this issue in snow leopard. I have searched mroogle as well as good and could not find anything.
I know there are many products available to provide an input to a MiniDisplayPort, but none seem to be combatiable with thunderbolt! Is there anything or anyone that can help me?
It was working fine for the past month and now I reconnected everything after moving the TV and I can't get sound... I've triple checked all settings on TV and MacBook.
I'm running a Macbook Pro 4 (Year '09-'10) w/ a Intel Core 2 Duo, Speed 2.4 GHz. I've a Samsung 720 HD TV and am wondering if there is a way to play video directly from my Macbook Pro to my TV's HDMI port? Is there a USB to HDMI?
I have a new MacBook Pro 17" computer. I want to play a DVD through the computer to a Toshiba 26" flat screen TV, using a mini port to HDMI.
At first nothing happened, then after much fiddling I got the Apple Spiral Galaxy image on the TV and my usual desktop on the computer. I then discovered that I can move the cursor from my desktop across to the right, where it disappears from my computer screen and appears on the left side of the spiral galaxy on the TV. So it's like I have two side-by-side screens, the Apple galaxy on the left, my computer on the right. In addition, I keep my dock on the right side and it's barely visible on the right side of the galaxy screen.
Incidentally if I play the DVD I can drag and drop it to the right so it slides off of my computer and onto the galaxy. But I know that's not the real solution.
I've got a recent MBP with Thunderbolt. I'm trying to connect it via a Mini DisplayPort-to-HDMI adapter to an HDTV with HDMI, but the MBP doesn't seem to acknowledge the addition of the new display. What it IS doing is flickering the built-in screen occasionally, the way it does when connecting to a projector or something, but it never shows any additional displays in the displays CP, and never seems to send any signal out to the HDTV.
Mac: MBP 2.3 GHz i7 with OS 10.7.4 Adapter: Belkin Mini DisplayPort to HDMI TV: Sony 32" Bravia
I'm using 2014 MBP 13" with last version of Yosemite. I had connected my old VGA monitor via thunderbolt and new one via HDMI. As soon as I connect the second one SystemUIServer process eats all memory like 70gb and use %100+ CPU which makes my computer unusable. I've tried to kill but it reproduce itself instantly. I can successfully connect 1(doesn't matter vga or hdmi) extra display but issue is connecting both of them at the same time.
I've seen a few posts about this problem on Macrumors and through Google searches, but I haven't found a solution to the "Black Border" problem some of us are having when connecting Macs to HDTV's via HDMI cables. Nor am I certain what the cause of the problem is: Mac?, TV?, HDMI cable length?
For me, resetting PRAM by holding Command-Option-P-R at startup and waiting for two chimes removes the black border for up to several computer restarts, but eventually the border comes back until I reset PRAM, again.
I have a 55' long HDMI cable from Monoprice ("HDMI Tin-Plated Copper CL2 Rated (For In-Wall Installation) Cable (22AWG) - 35ft (Gold Plated)") running from a Mac Pro with an ATI Radeon video card to a 52" Mitsubishi 1080p HDTV.
To clarify, this is not just a black bar at the top and bottom like when watching certain DVD's, but a black border around all four sides that effectively reduces the size of your TV from, e.g. 52" to 46" whether watching movies, surfing the web, or otherwise using the Mac via an HDTV
How do I connect a newer 2011 27" iMac to a flat panel via a Thunderbolt to HDMI cable? I've already tried this with two different brands of flat panels (RCA and Samsung) and both get no signal. The iMac does recognize the model of flat panel connected to it, the flat panels do not recognize the iMac, nothing but a blue or black screen. Already tried powering down and resetting both the iMac and flatpanels, resetting the memory on the iMac, trying all the HDMI ports on both flatpanels. Nothing works.
I have a Macbook and a new HGTV...I want to watch movies etc. from my mac onto my TV. I got a mini DVI-DVI and a DVI-HDMI cords...they plug in fine, but nothing happens....is there a setting i'm supposed to change...or what is the problem?....
I am looking to connect my macbook pro to an Acer G24 monitor, but am not sure what best way to do it.The resolution of the monitor is 1920x1200, and it is a 24" screen, with VGA, DVI, and HDMI ports.My macbook pro is the late 2011 entry model.
Will there be a difference in the quality of the picture on my external monitor, depending on whether I connect using a HDMI cable or a DVI cable? I will have to buy an adapter for each of these, to plug into the mini DVI port on my mac, will this alter the quality of the picture at all? If I were to buy an Apple Tv, would I be able to plug it straight into my monitor using a HDMI cable? If so, how would I manage the audio, as my monitor does not have speakers. Would using a thunderbolt cable (with HDMI adaptor) increase the quality of the picture of my monitor?
Info: MacBook Pro (13-inch Late 2011), Mac OS X (10.7.4), Apple TV, Thunderbolt, Monitor
I've tried re-installing and updating every possible graphics related driver for Windows 7 i cannot for love or toffee get the bloody thing to even recognize my display. I am using a 26" tv as an external display, it works on OS X (very easily), windows XP (also very easily) and even Vista (also easily) and connecting through a DVI/HDMI connector. Why not windows 7? I've scoured the web for answers but can't find anything. Is anyone at least in the same boat as me? I really need this solved soon
My Power Mac G5 is connected to my Sony HDTV using a brand new DVI-HDMI cable ($80 at Radio Shack). The second I plugged it in, both the TV and the Monitor went black. I only had picture for a couple minutes in 3 - 5 second intervals. It never straightened itself out. I restarted, same thing. Has this happened to anyone? It's as if the TV was drawing power away from my Apple Cinema display (non-HD...the older one). Heres my computer info:
Power Mac G5 2GB memory Dual 250 GB hard drive NVIDIA GeForce 6800 GT DDL