Power Mac :: Why Long Bootup Time For G5
Apr 21, 2012My G5 is taking over 5 minutes to boot up. Why?
Info:
PowerMac, iOS 5
My G5 is taking over 5 minutes to boot up. Why?
Info:
PowerMac, iOS 5
A couple of weeks ago my IMAC 24 started taking a long time to bootup, 5 minutes and 20 seconds.
It starts with a blank white screen for 1:45, then a black & white blinking world icon comes up for 2:15, then a blinking black & white Apple icon comes on for 30 seconds, then a pale blue blank screen for 20 seconds. Then the wallpaper comes on and it seems to go to a regular boot from there. Where can I access what is happening during all of this 5:20?
Since aquiring my own Mac G4 digital audio for dirt cheap (£0 ) I've been reassembling the peices. It works entirely, but I have a strange problem with the optical drives. Since the guy I had got it from removed almost everything (RAM, CD/DVD, HDD), I used spare parts to get it running. It boots into OSX 10.5 fine and everything seems to work ok, but upon powering the mac up, it ejects the DVD drive tray when the gray screen shows. It's done it with every drive I have tried and stops me from booting from CDs.
Is there any reason it could be doing this? These drives I know work 100%.
Info:
Power Macintosh G4 Digital Audio, Mac OS X (10.5.8)
I defraged my hard drive with Tech Tool and when doing the reboot, the G5 powers back on, the grey apple shows up then the screen goes to a blue background with just the mouse pointer showing.
Information:
iMac, G5
Mac OS X (10.5)
5th Generation iPod 80gb, 16gb iPod Touch
my new 2TB Time Capsule takes anywhere from 3 to 5 minutes to startup, before the status LED eventually changes to solid green. during that long startup period, the light is amber and blinks slowly.
View 1 Replies View RelatedI'm trying to determine, even after a visit to the Apple store and clean install, if my boot up time is sub-optimal. It's still taking over a minute to bootup to the desktop (from the start up sound). What's ya'lls times for booting up?
View 24 Replies View RelatedIt slowed down mine with almost 15 sec. My MBP used to boot up in 30 sec no the best i could do after trying several times is 45 sec. Do you guys have the same problem?
View 24 Replies View RelatedFor the first 39 seconds the screen white. It takes another 25 seconds for the imac to be in watcha you call it--standby mode. In all 64 seconds. Wonder how long it takes the i7?
View 10 Replies View RelatedInstalled a Samsung SSD 830 256GB into my MBP 15" after duplicating the hard drive via disk utility. But bootup times has nearly doubled from 35 seconds of the old HDD to 63 seconds with the new SSD when it's supposed to be the other way round! Applications do startup and run very fast though. Tried repairing my permissions but that hasnt helped.
Info:
MacBook Pro, Mac OS X (10.6.8), 2.2GHz i7 intel, 4GB RAM, 500GB HDD
I have a 80GB Intel X25-M G2 that cannot boot in less than 30s.
I keep reading that people get bootup times as low as 15s, and I was wondering if there is something I am doing wrong.
I am using about 30 GB of SSD space, and I use a 500 GB 7200 RPM Seagate Momentus XT hybrid as a scratch disk (downloads, documents, pictures, etc.) in the optibay.
I just did a clean install of snow leopard yesterday, formatted my X25 (wrote zeros, mac [journaled]), installed SL, updated, etc. The bootup time went up to over one minute.
I reinstalled snow leopard again (did not format this time) and it went down to 33s. I then reset the pram and it went down to 27s.
Now, it's back around 30s.
I just bought my first Mac a few weeks back and the switch has been going good but have had one thing that I can't seem to find any info on...
Is it possible to change the boot order on a Mac like in the BIOS on a PC? The reason I ask is that when I have my external hard drive connected the bootup time is slower.
Could this be that the Mac equivalent of the BIOS is doing a quick scan of the hard drive first, looking for an bootable operating system? Or is that extra time just OS X mounting the hard drive?
I have an iMac running the latest version of Lion (10.7.4) and which I have upgraded to a one terabyte hard drive and full memory capability. I back up to a My Book 2 terabyte external hard drive using Time Machine. My iMac is often very sticky, though I've done most of the diagnostics I know of and preferences etc. are seemingly all OK and fcuk -fs gives a positive result! The Mac is often hard to wake from sleep and in particular seems to spend a lot of time backing up very-very slowly, with the result that it frustratingly seems to be backing up most of the time with the consequent effects on using other programs. Also the whole thing seems to grind to a halt after a hard days work with quite a few applications open. I'm wondering what can be causing this and what I can do to overcome this very frustrating and debilitating problem?
Info:
iMac, Mac OS X (10.6.2)
I have a quick question to anyone who has a 27" iMac.How long in inches (exactly) is the power cable?
View 6 Replies View RelatedI have looked into this a lot already. It is to much that Time Machine backs up every single hour! It would be nice to set it to something like 3 or 5 hours. I have tried a 3rd party app to do this, but... If my computer was off or asleep when it was supposed to back up, it would get an error. It would not just do the backup when i turned it on or when it came out of sleep like stock Time Machine does. I have also seen a way to change the time incraments in the Terminal.(I am very good with it, not a noob) I have tried this and it screws up time machine completely. Maybe it does not work with the newest OS X. By the way... I have a 2010 MacBook Pro, got it 2 months ago.
Does anyone know a solid 3rd party app, that will work seamlessly. Or has anyone changed the time in Terminal and are currently using something different than 1 hour. There is a lot of examples online, but I would like the codeing that you literally used.
I have macbook Pro running OS X 10.9.4 purchased in 2012 times. For past few days, I've noticed this problem- I have to long press the power button to switch on the device. Normally, the devices switches on with a simple press on the power button. But for the recent days, when I do a simple press of the power button, I think it switches on and goes off instantly. I had to long press (for around 5-8 seconds) to switch it on. After the device is on, there is no problem at all...
Info:
MacBook Pro, OS X Mavericks (10.9.4)
I received a new iMac about 2 weeks ago, and I'd like to know how long the battery is suppose to roughly last for the keyboard and magic mouse. When I installed iStat Pro widget, it showed the battery power for my mouse, but the keyboard has never showed up. My mouse has been steadily losing battery power and is now at 28%. However, bluetooth states the power to my keyboard is 100%. This doesn't seem correct.
One other thing I've noticed in the bluetooth menu, under devices, is that the keyboard is labeled as "Apple Wireless Keyboard", while the mouse is title's my name's mouse (I.e.: "Darkroom's Mouse"). This may just nothing, but I'm assuming it's another symptom of my keyboard not being fully read by the OS.
Basically I have a MacBook Pro which logs in fine when I'm at work but when I'm on my home network it takes like 5 minutes to authenticate. All appearances are that it's trying to reach my work network to authenticate. Short of disabling wireless or having it prompt for my home network password before joining wireless, is there any way that I can either shorten the timeout or have it bypass network authentication when I'm at home?
View 2 Replies View RelatedMy Mac Pro takes two minutes to start up. It is also sluggish during normal operation. I have Parallels and a external hard drive installed. Do either of these contribute to this problem? Or is there a program that can be used to defrag the hard drive. (I recall having similar problems with my IBM computer. When it was defragged the performance of the unit improved).
Info:
Mac Pro, Mac OS X (10.6.8)
mac right click open with program take a long time
View 1 Replies View RelatedI was wondering if it was normal for a Mac Pro to take about 5-10 seconds before it plays the Apple "dong" when it boots up? My Dell does the same, it takes about 5-10 seconds for the Dell boot screen to finish before going to the Windows boot screen.
View 7 Replies View RelatedI have a 2.2Ghz Macbook with 2Gb ram and its running 10.5.2 (update went fine) and for some time now the start up of my mac has been very long. It sometimes take in excess of 30 minutes to turn on. It waits on the grey apple screen with the apple logo and the spinning loading sign near the bottom. Is there anything i could try without doing any major resets or reinstalls?
View 6 Replies View RelatedThe actual boot up time is very fast. However, when my dock and menu bar load, it takes like a minute before any apps begin launching. I only have Caffeine launching at start up.
View 21 Replies View RelatedI am repairing permissions and it has been 3 hours! Is something wrong?
I have had it take an hour before but this is making me nervous. It is however making that ticking clicking sound. What should I do?
I tried running a chkdsk /f /r on my late 2008 MBP yesterday. Started around 18:30, it was still running this morning and had only got to stage 4 of 5 and was on 18%, that's over 12 hours! I'm running Windows 7 64bit RC, and the partition size is 84 GB. My desktop computer on the same o/s and a 150 GB partition, took about 45-50 mins to complete this on the weekend, and I was wondering if any other MBP users had run a full checkdisk and how long it takes on their machines?
View 6 Replies View RelatedAnyone else noticed this? Compared to 10.4.x and previous gen mbp, I remember the partitioning via bootcamp used to take no longer than 45 sec to a minute. Now it takes something like 3-5 minutes to complete!
View 1 Replies View RelatedIt takes 10.6.1 35 seconds to go to sleep. Anyone else having issues like this? It takes in about a second. I could shutdown faster than it takes to sleep but damn.
View 4 Replies View RelatedI hit "Start" in Parallels to boot Windows, it takes like 1:45 min till I see the wallpaper on my desktop. I use Windows 7 on Parallels. I remember it also took about the same time for XP Pro to load on my Parallels/VMWare before.Why does it take so long?? Does it also take so much time to boot for you guys? If I boot my Windows through Bootcamp (not Parallels) though, it only takes like 45-50 secs for the desktop wallpaper to display
View 2 Replies View Relatedwhy but lately all the .wmv videos I have watched have taken an extremely long time to fully load. Before the whole file would load and I would be able to seek throughout the video to any part which I liked. Now however, the video instantaneously pops up but I have to wait for it to load before I am able to seek but I can basically watch the whole video before it fully loads (as if it was streaming).
In the attached picture, the Quicktime seek bar looks like this as I open it.
I have the free version of flip4mac, quicktime and OSX 10.5.8.
I have to boot into bootcamp frequently and it seems that shutting down osx, restarting into win 7/bootcamp takes quite a while... 1 minute and 40 seconds...?
This especially considering my osx startup is on an intel gen 2 ssd, and the win 7 startup is on a seperate gen 2 ssd... shouldn't it be 30 seconds or so?
I own a MacBook Pro (bought new in June-July 2009) and are having problems with my WiFi. I mostly use FireFox on both my mac and windows computer. I use a linksys router and have AT&T DSL. A lot of times web pages take really long times to load or do't even load at all. Web pages on my windows computer load almost fine.
View 3 Replies View Related