MacBook Pro :: Have To Long Press Power Button To Switch On
Sep 4, 2014
I have macbook Pro running OS X 10.9.4 purchased in 2012 times. For past few days, I've noticed this problem- I have to long press the power button to switch on the device. Normally, the devices switches on with a simple press on the power button. But for the recent days, when I do a simple press of the power button, I think it switches on and goes off instantly. I had to long press (for around 5-8 seconds) to switch it on. After the device is on, there is no problem at all...
Info:
MacBook Pro, OS X Mavericks (10.9.4)
View 2 Replies
ADVERTISEMENT
Jun 13, 2010
my brother is having a problem with his unibody MacBook that he bought just a few months ago. It won't start when the power button is pressed, the sleep indicator light turns on and that's all. There's no start up tune, and nothing appears on screen. I had a similar problem with my MacBook Pro. I was told that the logic board needed to be replaced due to too much dust or moisture. Could this be the same problem? and has anyone else here ever had the same problem?
View 2 Replies
View Related
Jul 22, 2010
I just got my MBP logic board replaced by Apple, and now it works fine, but when I press the power button, my computer freezes and this happens:
I'm probably bringing it to an Apple certified repair center, but I don't trust them as much as I do the Genius Bar, plus I'm pretty good at DIY stuff, so is it possible to fix this by myself?
View 4 Replies
View Related
Jun 4, 2014
When I press the power button a grey screen comes on and it won't go away
Info:
MacBook Pro with Retina display, iOS 7.1.1
View 1 Replies
View Related
Sep 2, 2014
macbook air 2013 needs power button pressed for 10 seconds before it turns on? also I've tried resting PRAM but when i press the 4 buttons before the start up screen it never restarts again?
View 2 Replies
View Related
Feb 10, 2008
I have a iBook G4 laptop and there seems to be something very wrong with it. It started a few days ago just randomly. I was reading something on the internet and the screen went black on me, but the power was still on (I clicked CAPS LOCK to see if there was power). I then proceeded to push the power button and the power went off. When I pressed the power button again to turn it on, it made that internal noise it always makes and then the fan came on, and wouldn't turn off. There was no picture on the screen at all. Completely dead. But there was power, because when I clicked on the CAPS LOCK, the light came on). I tried pressing on the power button for at least 15 seconds and even went as long as a minute, and the power didn't go off.
View 3 Replies
View Related
Apr 21, 2012
When I press the power button on my macbook it goes to the loading screen and stays there. It don't freeze it just keeps loading. I dropped it on the floor today but it worked after that.
View 10 Replies
View Related
Aug 7, 2008
is there a way to setup my MBP's Power Button to make the laptop directly and without opening additional windows enter sleep mode?Closing the lid to enter sleep mode is no solution
View 4 Replies
View Related
Apr 20, 2012
When I was working on my MBP last night I noticed the computer slowing down, then a sheer black wash went over the screen and a prompt saying I need to manually power off and then power on the computer with several different languages below. When I did that the computer made the on sound, opened up to the apple logo in the center and the spinning gear below. But its stuck there! I can definitely hear the laptop running but it hasnt budged for the last 12 hours.
Info:
MacBook Pro (15-inch Mid 2010), Mac OS X (10.0.x)
View 4 Replies
View Related
Apr 29, 2009
I have just shipped my Mac Mini to its new home and I've had reports that the panic error is appearing on boot up: "You need to restart your computer. Hold down the power button for several seconds or press the Restart Button." This screen appears on the blue window just after the grey apple screen has disappeared and does not get as far as the desktop at the same point each time. We have tried to reinstall mac OS from the original install disk but holding the "C" Key or the "Option" Key down on restart doesn't boot from disc. Is there a way you can view the Kernel Panic log before you boot into Mac OS so we can try and pin point the source of this problem. I'm wondering if this could have been the result of the shipping that has caused some hardware to come loose.
View 3 Replies
View Related
Mar 28, 2012
MacBookPro15.4 less than a year old keep freezing/locking with black dialog box to press power button until off and restart THEN repeat successive times after restarting it?
Info:
MacBook Pro, Mac OS X (10.6.8)
View 1 Replies
View Related
Apr 14, 2009
Whenever I open my mac mini it comes up with the same message "You need to restart your computer hold down the power button or press restart" in four different languages.
View 2 Replies
View Related
May 13, 2012
When I go to insert music to my movie in iMovie, I cant press the music button.
Info:MacBookPro
View 1 Replies
View Related
May 13, 2012
When I go to insert music to my movie in iMovie, I cant press the music button... ? Why??
Info:
MacBookPro
View 1 Replies
View Related
Sep 1, 2014
In OSX 10.9.2 [mavericks] when I shrink a document [yellow button] where it goes nor how to retrieve it. Sometimes they stay for a while in 'application windows' but then soon disappear. Does they are visible somewhere as thumbnails and can be retrieved as I used to be able to do in snow Leopard?
Info:
iMac, iPad
View 7 Replies
View Related
Oct 6, 2010
recently, my mouse has been having a lot of trouble holding its "click". By this I mean when I, for example, attempt to drag a file folder to folder or even drag a window around, it loses the "hold" and usually ends up dropping the file and clicking something else. Oftentimes if i right click hold it will lose the hold and select something else in the menu.Does anyone have any ideas as to what the problem might be? I'm not certain that it is a hardware problem either, if maybe it is something to do with my iMac itself?
View 1 Replies
View Related
Jun 25, 2012
I have macmini like mediaserver. But when internet is mising, or error when iTunes can't get album artwork it display dialog window. And i need conect to serve via VNC, and press "OK" Botton. What app can close this widnows avtomaticly? AppleScript?
View 2 Replies
View Related
Sep 6, 2009
My HP Photosmart 3210 all-in-one wouldn't initialize and sent error messages after I installed Snow Leopard yesterday. I went on the HP support network, which gave me a solution that sometimes works and sometimes doesn't, plus in the past I never had to take all the extra steps to scan a photo. The HP support site claims that upgrades for HP Printer devices was included with Snow Leopard. So why can't I just press the scan button like I used to?
View 20 Replies
View Related
Sep 4, 2014
Mail on my Mac used to check every few minutes automatically. Now it only come sin if i (a) relaunch the mail programme or (b) press get new mail button. Why has this changed and how can I get back to it being done automatically?
Info:
iMac, Mac OS X (10.7.5)
View 2 Replies
View Related
Feb 15, 2012
My G4 has suddenly stopped powering up. The power button just keeps flashing slowly, but the monitor shows nothing, any suggestions?
Info:
PowerMac
View 1 Replies
View Related
Jan 29, 2010
Power MAC G5.
Press power, lights up, fans BEGIN to spin then shuts down. Within 1 second.
Tried:
New RAM, new set of Processors, Video, Hard Drive.
Motherboard or Power Supply?
View 5 Replies
View Related
Aug 12, 2010
I think I have found a flaw in OSX 10.6.4 file copying..I normall back up my files, by dragging from a folder on my HD to an identical folder on my external HD.The folder I am copying has 86 files in it, but there are only about two dozen new files added since my last back up.I have been telling it by the dialogue box, not to replace identical files in the back up folder, and clicking the check box to apply to all."but when I press the dont copy button, in the copy progress box it says it is copying 86 files. WTF is going on...!@#$%^&*().
View 6 Replies
View Related
Apr 10, 2012
Its not possible finish the system by using the "switch off" command under apple. System is pending with running circle.
It is only possible by using the button on backside. How can I find out reason and change?
Info:
iMac, Mac OS X (10.7.3)
View 2 Replies
View Related
Dec 6, 2007
I added 2 sticks of 512 to my power mac g5 1.6. I had ahard time getting the computer to see the new ram, but finally was able to kinda get it working after zapping the pram. However my computer only saw these 2 sticks as 256, odd. So i attempted to troubleshoot the problem. I tried just installing the new ram, but the computer wouldnt boot. I tried a few different combos with the other 4 sticks i had, but nothing. I put the old memory back in, and still nothing. The power led looks to blink once every five seconds or so. I tried pressing the pmu reset button, but still the same out come. I also tried taking out the battery, nothing.
Information:
1.6 g5 single proc
Mac OS X (10.5.1)
View 15 Replies
View Related
Dec 13, 2007
I had a weird issue this morning. I started computer and it did not make the chime sound, it didn't do anything at all. I disconnected it from the extension cord as well as all the peripherals attached to it and nothing. I tried a different start up disk and again there wasn't a sound. Then i unplugged it and reset the SMU on the mother board and air sprayed the computer to remove all dust. Then plugged it back and it came back on.
Information:
Power Mac G5 Dual 1.8
Mac OS X (10.4.11)
View 5 Replies
View Related
Oct 7, 2006
I'm using a B&W Power Mac G3 with 512MB RAM and OS X Tiger for a SMB file server (with 5 users) and a USB printer server. Everything is working good, but I have a problem.
It doesn't have a monitor or keyboard/mouse attached normally (I can configure it via VNC). The problem is that I would like to be able to turn the machine off when it's not needed (like at night sometimes, days when I won't be home, etc.). I would like to just hit the power button and have it turn off, however it puts it to sleep instead.
Normally, sleep would be fine, except on the B&W, the fans still run, just the HDs shut off, so it's still noisy as heck.
Is there a way to make the power button shut it off? If not, any other easy methods of shutting it off you can think of? Via VNC won't cut it, as my dad needs to be able to turn it on (not a problem) or off as well.
View 9 Replies
View Related
Mar 21, 2009
i just got my new imac 2 days ago. I was wondering is there another to turn on the power without pressing the power from button? (cuz i remember u can power on from the keyboard b4)
View 7 Replies
View Related
Apr 18, 2012
I cannot get my macbook pro to switch on.when it is not plugged as I press the power button nothing happens, when the computer is power plugged, it gives me the white blackground with the apple centered and the loading button below but it keeps loading forever left it as for 4 hours and still nothing. I have try to reset the SMC but didn't change much, now instead of the apple logo I get a circle crossed My macbook is 1 year and 4months?
Info:
MacBook Pro
View 2 Replies
View Related
Mar 14, 2009
I upgraded to iTunes 8.1 when it showed up on Software Update. Since then, I've noticed that when I hit the Play button to play anything in my Library, there is a long pause (about 6-7 seconds) before the audio file starts playing. Have any of you had this happen to you?
This is on 10.4.11 on my iMac G5. My drive is getting short on space (and I'm aware of issues do to short drive space ), but it didn't do this before the upgrade to 8.1. Let me know your thoughts...
View 7 Replies
View Related
Jul 2, 2012
Is there a way to switch off the Keyboard Backlighting on a Macbook pro only when it is on battery power?I have been through the energy saver settings and it appears that the settings apply to both power and battery.
Info:
MacBook Pro, Mac OS X (10.7.4), 13 inch 2.4Ghz Core i5 4 GB RM
View 1 Replies
View Related
