I have an old G5 power mac tower. The hard dives were removed and replaced with PCs ones before I was given it. I do not know if they were formatted. I have the original boot up disc and I want to start again with this tower. The tower turns on but does not recognise the keyboard (which I know works) so I am unable to boot from the CD to have a fresh tower.
View 1 RepliesI have a G5 Power Mac dual 1.8 running 10.5.8. It powers a radio stations automation system. I have it set to power on after a power failure but for some reason it will not power on. I have to come t the station and reboot the system manually.
View 1 Replies View RelatedI have a process running prl_vm_service and it is making my HDD very noisy. I think that spotlight keep indexing this file. Because when is shut down this process my HDD become almost silent. I would like to prevent this process to startup when I reboot my iMac. Is there a way to do this. I am aware that Parralles (this process belongs to it) needs it, but still I want to prevent this process to startup.
View 4 Replies View RelatedOn my Macbook Pro (Tiger) I suddenly got an error message about running out of space on the start up disc (woking on a word 2008 document). Checking suggested I had only 124MB left.
A couple of days earlier I had 60gb free. Deleting a few gb of programs reduced the space to zero!
I couldn't work out were the space was being used but as most programs were now refusing to work. I just shut down.
On switching back on, the HD space had come back and I had my 60gb of free space back.
whether its a sign of a problem I should try and sort out, or is it just "one of those things".
I picked up an 802.11n Airport Express card for my Mac Pro last week. The installation went fine, but my Netgear router was only 802.11g. So I felt the need to get an Airport Express now that it?s been updated to ?n?. First I plugged the AE into my switch along with my networked printer, cable modem, and Tivo. My 1st gen MacBook showed me full bars and was very happy. My Mac Pro only showed 2 bars. They are side-by-side and about 20 feet from the AE. Strange. I plugged the AE into an extension cord and moved it closer to the Mac Pro. Still, after the AE completes its POST, I get full bars on the Mac Pro. As soon as I hop on the internet, it drops to 2 bars. It?s really weak and pages take forever to load. Sometimes not at all. The MacBook is still fine.
My wife being used to PC nightmares at work suggested that I reboot. ?Heresy?, I said. ?I shouldn?t have to do that. It should ?just work?.? From the Mac Pro, I turned Airport off and then on again. Full bars again. As soon as I hop on the internet, it drops. So what?s up? Much to my lament, I rebooted. Bingo! It works. Full bars, all the time. So I moved the AE back to where I initially had it. (About 5 feet away next to the cable modem and switch. One less extension cord to deal with.) The AE completed its POST, gave me a green LED and I went back to the Mac Pro. 2 bars again! ERRRR!.............
I am having lockup issues with my new Mini. I changed the RAM to 3gb and a SSD. boots fine but completely locks up after a period of use. Only way to cure it is to force reboot via power button. Anyone here has the same issue or know what I should do?
View 7 Replies View RelatedI have a G5. It started whining loudly and now it has a black sceen. Can't find old discs to reboot.
View 8 Replies View RelatedI've had my original MBP since 2007, which was originally on 10.4 I believe. I've done upgrades up to the current 10.7.4. My original MBP was encountering end-of-life hardware issues, so 3 months ago I purchased a new MBP. I used the Migration Assistant utility to move my files and user settings.My older MBP toward the end of its life was having OS shutdown / reboot problems. The OS would never completely shut down. It would go to a light gray screen, and the twirling icon in the middle never went away. A manual shut down from the power button was the only recourse. It seems that the issue is tied to issue(s) with my user account settings, since the problem is still present, despite newer hardware.I'm comfortable with reviewing my system.log in Console and issuing Terminal commands, if that will help with any troubleshooting.
Info:
iPhone 4S, Mac OS X (10.7.4), MBP, 2.4 GHz Intel Core i7
I have a 17" iMac G4 that I was rung Tiger with, then I installed Leopard 10.5. I use this as a second computer. All is fine except that my Epson scanner does not work with 10.5. I've tried the latest drivers. I'd like to reinstall Tiger. I used the 10.5 disc to reformat the drive and start from square one. When I boot from my original Tiger disc it starts opening it's windows, but when I get to the point where I can choose Install or use Disk Utility to reformat from the Tiger disc, all windows freeze and I need to hard reboot from the power switch. Am I correct to assume that 10.5 won't let 10.4 to reinstall. Is this correct?
View 5 Replies View RelatedI came home for vacation and decided to reformat my imac g5 to get a fresh start. I backed up all my files, took out my leopard retail box, and was ready to go when I opened up the box, and noticed no disc. I have no idea where it went.I have the install discs from the computer when i got it, but it only has 10.4, so id rather not use them. I have the install discs from my macbook pro with 10.5, but I am pretty sure it will not work.So does anyone have any suggestions? Should I just go ahead and install 10.4 until and then just install 10.5 when i find it? (i really hate doing this, I hate having more than one version of an os installed)
View 2 Replies View RelatedWe own a powermac G5 that has had some problems in the past, but nothing like this. When we press the power button there is a chime and fan that shows everything is working up. A white screen appears with the apple sign showing that it is loading. After this screen has been loading for a while the computer just shuts down completely.
Info:
PowerMac
Is there a way to get a USB startup on the dual 1.8ghz G5?My macbook enables USB boot obviously but my ppc does not support it
View 5 Replies View RelatedMy Power Mac (2x2GHz G5, Late 2005 model) is acting strange since a couple of days when I want to start it up. When I press the power button the white light comes on for a short time and goes off again. When I press again and hold the button the white and the red light come on, usually also the startup chime sounds, and then the lights go off again. When I repeat the action the computer eventually starts and boots normally and then works normally. Sometimes it works already the second time, sometimes I have to try more times.
Does anybody here know or have an idea what this might be and wether I can repair it myself?
I recently developed a problem where my Blue and White G3 Power Mac will not start in OSX. It starts but then displays a screen that tells in four languages to restart my machine. When I restart I just get the same message.This all started when I switched from booting in OS 9 to OSX. Both had worked in the past. Now I cannot return to OS 9. Is there a short cut of keys to press to bring up the start up disk control panel during start up to try switching back to OS 9?
View 3 Replies View Relatedusing system version 10.4.11 on a power mac G5, all of a sudden when i try to open MS word or quark xpress, my computer hangs up and the app won't open. i have to force quit to stop the rolling beach ball.
Info:
Mac Pro, Mac OS X (10.4.11)
We have an older model G5 Dual (no Intel Core) at the office that we tried to install CS3 on. I told them that first we would need to upgrade from 10.3.8 to 10.4.10, which they did, and then installed CS3. But they did it without running the disk utility repair permissions after the OS software installation, as I have routinely done with my Mac Mini at home, after the horror I experienced with the 10.4.9 upgrade. For a couple of days, the computer ran fine, but I noticed an increase in the fan spinning up yesterday afternoon, then quirky keyboard things -- like I'd select an item with point and click, and it would highlight everything else near it, I'd go to quit an application and it would ask if I wanted to quit all applications.
After backing up my current InDesign work files on a flash drive (but not the whole darn art folder), I rebooted and it came up in Safe Boot mode 6 times without holding any key down. Attempts to boot from disk have failed, even with holding down the "C" key. It's also not allowing us to type out full passwords at the log-in screen... you start typing and after you hit four digits, it clears, then only allows two digits. How we can:
1.) Force boot from disk, and,
2.) Hopefully fix with disk utility whatever wonkiness is occurring?
Information:
Mac Mini, Intel Core & G5 Dual (not Intel)
Mac OS X (10.4.10)
I am running a quad core G5 PPC. I updated to 10.5.1 last week when it was made available and had no problems until yesterday. I tried to empty the trash and immediately had a kernel panic. I restarted and that is when the problem became more apparent then a simple restart! The Kernel Panic continued to repeat itself on the startup screen. I called apple support and went thru all the steps with them including trying to boot from the OS X 10.5 disk, in safe mode, as a target, trying to reset the (I guess I forgot what we were resetting but I was told to hold down Apple-R and Option-P) as well as opening the case and holding down the small button underneath the RAM. Anyway, nothing worked. Even in target disk mode, it made my G4 Powerbook running as the main pop up with a kernel panic! I cant get to the finder to see what the kernel panic parameters are.
Information:
G5 Power Mac
Mac OS X (10.5.1)
PPC
My usually stable 10 year old G4 hard drive (attached to VGA monitor) is having serious problems with it's starting up process, so I am presently nursing it along (without shutting down at the end of the day) by using sleep mode. If I shut it down, chances are it fails to power up again. When I press the power on button to startup, I hear the chime and the startup process as usual, then everything stops within seconds, before the monitor screen is due to come on. The two external devices attached are the keyboard with mouse, plus a USB hub. No recent upgrades or changes. Everything is backed up on an external firewire disk. Since this trouble started a few days ago I have replaced the lithum battery and managed to successfully start it up only once (after a number of attempts) so I can nurse it along. I have tried all the usual troublshooting - when I restart in either safe, verbose, or reboot off OSX CD, single user mode, extensions off, or try to reset the PRAM fails to chime twice - in every instance it won't get past the chime. Checking the system profiler 'power on self test' indicates 'failed', failure type is 'external cache'. As I can't reboot off the OSX10 or systemworks CD I can't run Diskwarrior on the operating system or reinstall the operating system. So, I am now at the limit of my capabilities.
Info:PowerMac, Mac OS X (10.5.8), G4 Quicksilver 2002 Dual 1GHz
My iMac 24 inch freezes on the apple startup screen, then it takes along time for the cog wheel to start turning, and then that's all you'll get untill you switch off. I've fixed permissions and erased and reinstalled but still same issues, any ideas for what to do next?
Info:iMac, Mac OS X (10.6.8)
Last night I was defraging my G4 OS Tiger 10.4.11 and at about 53% the power went out. Now all I get at start up is the Kernel Panic screen. What should be my first step?
Info:
PowerMac, Mac OS X (10.4.11)
Thinking of using 500GB and 750GB internal drives for a raid 0 startup disc (software raid obviously)?
Information:
Dual 2.5 G5
Mac OS X (10.4.11)
I am having a problem getting my G5 to boot. Half the time when I turn it on I get no chime. The other half, I get the chime but the boot process does not continue. If I leave the computer on the fans begin to progressively get faster and louder after about 5 minutes. I've tried starting with various USB and Firewire components unplugged and have even gone to just a keyboard and mouse. No change. Can I get the computer to boot from an OSX CD? How do I open the tray? etc.
Information:
Powermac G5 Dual 2.5GHz
Mac OS X (10.4.7)
I have an old "vintage" Macbook with Tiger as my OS. I have all sorts of sleep issues with it, and recently after accidentally hitting the sleep button, I had to force quit the machine by holding down the power button because it was just (beachball) spinning when I tried to start it up again.Â
I went to start it up and I get the gray screen with the apple on it and the spinning "clock hands" this goes on until I get a darker screen without apple and more spinning. It stays there. We've tried a host of solutions including the resetting through battery removal, we've tried to "archive and reinstall", etc.
Info:
MacBook
Cannot eject the start-up disk from my PowerBook G4 (laptop). Can anyone help me? My screen is blank too, that's why I'm using the start-up disk.
Info:
MacBook Pro (17-inch 2.4 GHz), Mac OS X (10.7.4)
I've been reading a great deal in this forum regarding the issue in the subject line of this post. But it all has to do with 10.6.8 Snow Leopard. My 10.5.8 on my system has not been updated in any way for a while. So how is it that in the last couple of weeks all of my Power PC apps still on board, are going through this crash on start up routine. If I select 'relaunch' from the dialogue window that pops up upon the intial crash, the app will run fairly normally. This can't be about a security update like with Snow Leopard.
Info:Mac Pro Quad Core Intel Xeon / Macbook 2.4GHz, Mac OS X (10.5.8)
on startup, macbook pro showed flashing gray folder with question mark, but no startup. After several retries, now shows circle with diagonal diameter, and still no startup. worked fine yesterday.
Info:
MacBook Pro
I'm wondering how many discs puma has?
View 11 Replies View RelatedI have Black MacBook with 10.7.3 in it when i press alt/option while starting the laptop the startup manager wont come and OS X boots.
Info:
MacBook (13-inch Early 2008), Mac OS X (10.7.3)
I bought my computer second hand and I don't have the install discs for OS X and I need to install x11. I tried this link: [URL] but it says I have a newer version installed.
View 6 Replies View RelatedI am traveling and I forgot to get my Mac OS X install discs with me. I have a Early 08 MBP 15 inches, 2.5 GHz. Will the install discs that came with a white MB be the same for the MBP?
If not, where can I get new install discs?
