I try to insert my hard drive and it says "the disk inserted is not readeable by this computer" but when I open disk utility to repair it says "First Aid failed, Error: filesystem verify or repair failed". I am very frustrated, my work is due next week and most of it is in the drive.
Info:
iMac
I ran Disk Utility and before it finished I received Filesystem verify or repair failed error message. It says to run repair but I can't
Info:
MacBook, Mac OS X (10.5.8)
My Macbook pro has been running slow as of late (spinning rainbow) causing other programs to freeze up. I verify/repaired the disk permissions with no problem until I went to verify/repair disk.
The error called "Filesystem verify or repair failed" appeared with the following information: invalid volume count / invalid directory count. This volume needs to be repaired.
Question: Is this causing the macbook to run slow? How can I repair this problem? What actions inflicts this problem? ( To prevent this in the future )
I had 2 partitons and i wanted to install XP using boot camp, of course i have to make my hard disk 1 partition, so i deleted the second partition and resized my 1st partition, when i try to resize 1st partition i get this error: filesystem verify and repair failed
View 1 Replies View RelatedI have a MacBook and last night it froze for a while, so I manually shut it down. When I tried to turn it on, it went to the white screen with the folder and flashing question mark. I don't know how to fix computers at all, so I looked online and it said to put the disc in. I went to disc utility and it shows the hard drive, but it is not as bright as the install disc.. does that mean it cannot be found? What should I do? I tried to reinstall the disc to my hard drive with the option checked to keep my old settings, etc but it did not work. Most of my stuff is not backed up so if there is any way I can try to save it before I try to reload the hard drive would be really great.
View 1 Replies View Related I'm trying to repair my hard drive. I restarted from the OS X Mac Mini install CD (holding down the letter C when I heard the chime), opened Disk Utility from the Utilities folder, selected my hard drive image, but the "verify disk" and "repair disk" options are grayed out. I'm at a loss as to how to proceed.
Information:
Mac Mini
Mac OS X (10.5.8)
on doing a disk utilities scan it came up with this - "Problems were encountered during repair of the partition map" why won't it let me repair this problem?
Info:
MacBook Pro, Mac OS X (10.7.4)
I have a WD Terabyte drive that I have used for over a year with no problems. A couple of days ago my roommate went to use it and disconnected the drive from my computer without ejecting it first. He used it with his PC and disconnected it without "safely removing" it from his computer and now it will not mount to my desktop of been seen by PC. Disk Utility sees the device but I get an error when I try to repair the disk or verify the disk. It gives me an "error on exit" message. I really need the 700GB of info on that drive. Don't know what to do next.
Information:
Powerbook G4
Mac OS X (10.4.11)
I have the "show detail" box checked but Disk Utility is not showing detail.It goes through verify and repair, says it is finished, but shows no files. I have never had No files need repair.My computer has been slow and erratic and usually running Disk Utility works, but not now.
Info:
iMac, Mac OS X (10.7.1)
I have an iMac OS X 10.5 or 6? that was not getting past the apple logo and spinning gear, so I started from install disks, selected Disk Utility, and got the following messages. The lines in Caps were red
Checking Journaled HFS Plus volume
Checking Extents Overflow file
INVALID LEAF RECORD COUNT
(It should be 1454 instead of 1444)
Checking Catalog file
Missing thread record (id = 20796)
INVALID SIBLING LINK
VOLUME CHECK FAILED
ERROR: FILESYSTEM VERIFY OR REPAIR FAILED
I don't know where to go from here! Please help, I'm not Mac savy, so any suggestions need to be specific.
I'm experiencing some problems with my iMac right now, and I'm not sure how they started or what to do to correct them.
1) Computer seems to hang up from time to time while starting applications, or in the middle of some tasks. There's no rhyme or reason or any patterns.
Question: Is there anything I should try to clean up the computer?
2) About a week ago I started using Time Machine to do scheduled backups rather than me manually starting my own backups. Now whenever time machine does a back up, it seems to stop working somewhere in the "Preparing to Backup" stage, and I end up needing to restart the computer manually because the whole system becomes useless. It will no longer complete any backups, even when I start manually.
Question: Why would time machine now all of the sudden start freezing in the middle of the prep to backup stage?
3) I just tried to use my disk utility to check and see if I need to repair the disk and here is what reported back:
Info:
20" iMac, Mac OS X (10.5.8), 2.4 GHz Intel Core 2 Duo
Two days ago my computer died and I haven't been able to get past the Apple screen since. I've tried starting in Safe mode, etc. that did not work. I just started up using my installation disk and got into Disk Utility. It says it cannot repair the disk and that I should back up as many files as possible and reformat the disk. How am I supposed to back up if I can't start up? I am currently creating a new image of the HD to an external drive but my question is if Disk Utility couldn't repair the disk, with the external drive copy also be problematic? How can I tell before I reformat the whole thing and start over?
Info:
iMac (24-inch Mid 2007), Mac OS X (10.7.4)
While trying to pepair permissions systom freeze up. So I put in the startup disk hit restrat holding down c and tried to repair permissions that way and it froze up that way too. I had to manually turn off machine.
Info:iMac, Mac OS X (10.6.8)
I just tried to verify my HDD, and Disk Utility said: Invalid node structure. Volume check failed. Error: Filesystem verify or repair failed. Now when I tried to reboot my Macbook, the gray Apple comes up and so does the spinning wheel, but after a couple of minutes, it shuts down.
View 2 Replies View RelatedI'm running OSX 10.4.11 on a 12" PowerBook 1.5 GHz with 1.25 GB of RAM and an 80 GB HD.
When I run the disk Utility to Verify Disk, it ends with the message, "Error: The underlying task reported failure on exit." This happens if I run the Disk Utility from the hard drive, from the OSX installation disk or from an external hard drive.
The Repair Drive button is always grayed out no matter where I am running the disk Utility from, too.
So far, I haven't had any other unusual things with the operation, but I'm concerned that this could be an early warning of problems to come.
Has anyone else had this problem or have a clue?
I have cloned the entire hard drive onto an external drive with Carbon Copy Cloner. I know PPC systems won't boot from a USB drive, but I was considering booting from the install disk, re-formatting the drive from there and then re-installing from the external by running CCC from there. I hope someone will have a direct solution to repairing the drive without doing all of that.
Having a major issue: similar symptoms to others in the forum - with the fan and the computer not getting past the grey apple screen, I booted from the install disk and got to disk utility, at first all options were greyed out and I could not do anything, tried again a few times and finally got to the point where I could run the verify utility, never given the option to repair. When running the utility it failed and said I needed to repair by booting from the install disk and running the disk utility? Going around in circle here - any advice? I am currently running the Apple Hardware test to see if that shows anything...it has been a workhorse and I've NEVER had any issues with it.
Information:
PowerMac G5 Dual 2Ghz
Mac OS X (10.5.1)
4G RAM
When I go into first aid in disk utility, and click on my system drive, the verify button is grayed out.
If I remembered correctly, I was able to verify my system drive before.
Information:
MacBook Pro 2.16
Mac OS X (10.4.9)
I have an USB external HD attached to Time Capsule. Trying to find out how one can use diskutil to do a verifyVolume on this drive. I tried something like: diskutil verifyVolume /Volumes/myDrive but it didn't work. The command is (naturally) ok with an USB external HD attached to the USB port on the Mac itself.
View 4 Replies View RelatedThe Verify failed when checking the drive at the physical disk level, but the main volumes passed.Is this "normal", i.e. should I just be checking the volumes?
Info:
MacBook Pro (13-inch Early 2011), Mac OS X (10.7.3)
When I used Disk Utility to verify my LaCie disk, I received this message:
Disk Utility stopped verifying "LACIE" because the following error was encountered:
The underlying task reported failure on exit.
I am trying to repair my disk so I can install bootcamp, but when I reboot my machine and run disk utility and choose repair disk, it hangs. Does anyone have any ideas ?
View 8 Replies View RelatedI have a 2TB Western Digital My Book Studio FW800 external that has 5 partitions, connected to my 2011 iMac. I had help doing the partitions and don't really remember the reasoning, but one is just for my SuperDuper! backup, one is Miscellaneous, one for movie clips off my camcorder, one for misc scanned photo's and one for my genealogy research. I back up using Time Machine to a Time Capsule and also to this WD hard drive with SuperDuper!
Recently I'm getting a pop up message that "Mac OS X can't repair the disk "Genealogy"'. And it needs to be reformatted. It's become a read only disk. When I look in Disk Utility it shows all the partitions as "Mac OS Extended (Journaled)" EXCEPT for the one in question. I also noticed that there are a lot of files with "date created" being the same date in 1969! These files may be letters I've written or photo's I added to that partition within the last few years.
I think I have to completely reformat the entire external hard drive to repair this, but I want to make sure. Because it's going to be a major hassle backing it all up to another external (having to get one first) and then figuring out how to make the files that have turned "read only" in that one partition, back to their original state! Does this sound right, that I have to reformat the entire external hard drive? And how do I get the read-only files back to their original state.
Info:
iMac, Mac OS X (10.7.3)
Running Diks Util on my iMac 10.6.2. i am given this warning.
=========
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAgent" has been modified and will not be repaired.
Is it something I should heed and what to do in that case?
One of my drives is showing issues that Disk Utility isn't catching or can't find. I've heard about Diskwarrior, iDefrag, Drive Genius, etc... but which one is the most comprehensive, is there a "best of breed" disk app out there or one that does more than the others?
View 3 Replies View RelatedRunning Disk Utility's Repair Disk function from DVD, how long should this take to complete with a 1 TB drive? It's been nearly 24 hours so far. I booted the computer from the DVD, and after verifying the disk was told the disk needed repair.
Info:
iMac G5, Mac OS X (10.4.3)
I am having problems with my Mac running slow. I had a friend guide me to run a "repair disk permission".I did that but I am not sure if I am to click clear history.Also should I do anything else to help my Mac run better?
Info:
iMac, Mac OS X (10.6.8)
Macbook Pro running on OSX Mavericks is having problems.
Today I turned my Mac on, and it started up with a loading wheel and a loading bar. When the loading bar finished, the Mac turned itself off. I tried many times, same happened every time. I then went into OSX Recovery, started repairing Macintosh HD, but the error message saying "Disk Utility can't repair Macintosh HD" came up and now I don't now what to do.
Is there any way I can back up my files in this situation? Is there any way I can repair the disk without having to erase all data and reinstalling OSX? Or do I really need to bring it to a Apple Store for repair?
Info:
MacBook Pro, OS X Mavericks (10.9.4)
I have a Seagate 1 TB Backup Plus Drive which was working perfectly fine until I plugged it into a USB hub. It detected it while in the hub and I was able to get files off of it, but when I ejected it from the hub and put it back into the USB slot on the computer it was not detected by finder. It shows up in the disk utility and I clicked verify and repair and it says:
Verify and Repair volume “Seagate Backup Plus Drive”
Checking file system
Volume repair complete.
Updating boot support partitions for the volume as required.
Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
Is there any way to get this to work properly again? Or if not is there a way for me to recover my files on the external hard drive?
I have a Macbook PRO late 2011 running OS X Mavericks.
I ran installer then went to disk utility and pushed disk repair. it ran and indicated in green that no repairs were necessary. i then went to startup disk and only the Diks and network startup showed up but no hard drive. i also open computer to make sure was not wet muddy due to leak in cooling system but all was dry
View 1 Replies View RelatedI have run the Disk Utility verify function against my system partition. It tells me there are minor issues that need fixing up and I should run the repair disk function, by booting using Command-R and using the Disk Utility to repair the drive.Problem is, when I boot using Command-R and select Disk Utility the partition is shown greyed out and the Verify and Repair options do not work.I think this could be because the partition is encrypted. The utility does not offer me the chance to unlock the partition with my passphrase.How can I repair the filesystem errors on this partition?
View 2 Replies View Related