OS X V10.7 Lion :: Unable To Print Double Side Using Cannon D500 Series
Apr 15, 2012I am using OS Lion. I couldn't enable the double sided printing in my printer.
Info:
iMac, Mac OS X (10.7.2)
I am using OS Lion. I couldn't enable the double sided printing in my printer.
Info:
iMac, Mac OS X (10.7.2)
My lab just got a new HP Color LaserJet CP3525 and while everyone else can print double sided (both Linux and OS X), I am utterly unable to. I don't even have the option. This is weird, because I have the correct drivers installed and in the system preferences panel, I have the option for duplex printer checked.
View 2 Replies View RelatedTowards the lower right hand side of my monitor there is a series of pixels that are dimmer than all the rest. It forms basically a backwards J. It is most obvious when there is a white background (like on this site). Is this something that would be covered with Apple Care?
View 4 Replies View RelatedI wanted to make a backup of a double-sided DVD using Mac The Ripper. It ripped one side with no problem but refuses the other one. It recognizes the presence of the DVD, seems to scan the DVD correctly and the Go! button is then ready to be pushed, but when pushed it flashes (in a tiny fraction of a second) the word Cancel that's in the same box and does nothing else. I've looked in the manual; I've tried restarting MTR; I've tried rebooting the computer; I've tried all that again on another computer. Nothing seems to make any difference.
View 7 Replies View RelatedI have a rather large print job to do, with several hundred word documents that open using word. I dont want to have to open them all and click print, I'd just like to right click and hit print. However, when I do this even if the last document was sent to print double sided, my mac prints them all single sided.
View 1 Replies View RelatedI added a network printer (HP Laserjet 2300) to my MB (OS 10.5.8) printer list and I can print single sided just fine. BUT there is no option anywhere in my print menu to print double sided. My two labmates can print double sided on this printer (one using MBP with OS 10.6, one a Windows PC). The menu on the MBP looks different and where I have the "reverse pages" option, they have a "double-sided" check box.
I have already:
-Checked the Duplex Unit box on the printer info menu in System preferences
-Looked at ALL the sub menus in the printer menu
-tried to reinstall the drivers (current driver v. 4.3.5.153 - I suspect this may be the issue because the MBP that can print double sided has driver v. 16.something). Actually the HP site was extraordinarily unhelpful in telling me even what version of drivers I should have or getting me to a place where i could download.
-Restarted my computer with various iterations of the above.
This printer can and does print double sided -just not from my computer because I don't have the check box.
I can't figure out how to print double sided using my MB. It works fine in windows, but I can't even find the option to do so in OS X. I'm using various different HP printers and can't do it with any.)
View 14 Replies View RelatedI am attempting to edit two photos. My goal is to take the two photos and place the objects side by side so that both my daughters appear in the same photo.
Info:MacBook Pro (13-inch Mid 2010), Mac OS X (10.7.3)
double sided printing on mac. Since I changed to a mac, I havent been able to print double sided from my epson sx425w printer. This can be quite annoying if you a lot of pages to print. The double sided print option is just disabled so I cant even select it and I dont have the option of "Duplexer" or "Duplex Printing" as suggested in other posts. Besides, I've not been able to use my scanner since upgrading to Mavericks-I know others have had similar problems too.
View 2 Replies View RelatedI have shut off the printer, but most of the time when I turn it back on - it prints a black page and then eventually sends the same error message.
Info:
Mac OS X (10.7.3)
Just bought a new cannon printer MF4500 not compatible with Lion? Or Mac at all? Can't find a driver either. Do I have to return it?
Info:
iMac, Mac OS X (10.7.3)
I recently upgraded to Lion and am now unable to print either through USB or wirelessly. I have an HP Officejet Pro 8500A Plus printer and have made sure to install all the new software since upgrading my OS. When I go to print my print queue shows the status as 'printing' but ultimately nothing prints.
Info:
MacBook Pro, Mac OS X (10.7.3), HP Officejet Pro 8500A Plus
I have Mac OS X 10.7.4 and I am unable to save or print .pdf files...
Info:
Mac Book, Mac OS X (10.3.2)
Unable to Download TV Series from iTunes on IMAC works on Macair i get the following error There was a problem downloading Love Is Blind / House, Season 8 / House.You do not have the privilege to make changes.
Info:iMac (27-inch Mid 2010), Mac OS X (10.6.6)
My Mf 4350d printer does not work with lion Mac OS X Lion 10.7.2., it worked with Snow leopard no problem. How to do any changes carefully.
Info:
iMac (27-inch Mid 2011), Mac OS X (10.7.2)
I want to print iCal with Mondays in the left hand side column. My calendar prints with Tuesday in the left hand column even though it displays Mondays in the left hand column when in normal use.
Info:
iMac, OS X Yosemite (10.10.1)
I am unable to print using my hp B210 wireless printer from my new macbook pro.
Info:
MacBook Pro, Mac OS X (10.7.4)
Wireless printing has suddenly stopped working. It worked one minute, then a few minutes later didn't! Is this an OS problem? Using Airport Extreme for wireless and everything has been fine for 4 months with iMac and old Macbook.
Info:
AirPort Extreme 802.11n (5th Gen), Mac OS X (10.7.4)
Is there a way to force Safari to print what I see on a webpage, and not default to the print style? I'm trying to print a graphically-rich site and the print.css doesn't cut it, making everything look like trash (unformatted text, etc.).
View 1 Replies View RelatedI'm trying to print an Excel 2004 .xls spreadsheet file where I'm using to record attendance for the class I teach.I have my main Column A with Rows A-X and it shows up fine, I imagine because there is content in the boxes.
But I also have Columns B-L and rows A-X with nothing in their cells, but when I print it, they won't print.I need these blank because I'll check them off if the child in the first column attended the lesson. How do I make it so my many blank cells will print as well?
I'm new to Mac OS X, but have been working with Linux for almost 9 yrs now. I have set up a Linux box with CUPS 1.3.9. I can print from the server, and from other Linux stations to that remote server. However, I can't print from a client MacBook.
I set up CUPS on the client Mac via http://localhost:631 and created a printer associated with the remote queue / printer on Linux (the URL I use on OS X is http://mylinuxserver:631/printers/hpprinter and the driver is RAW).
I have no problems sending a test page from the CUPS web interface on Mac OS X to the Linux server -- the test page gets printed OK. However, I can't see the printer I just defined from other Mac OS X apps, and neither can I see it from the Add Printer Dialog on System Preferences (it's empty).
I tried creating the printer at the Add Printer dialog, but it would neither let me specify an HTTP URL (as far as I know, I had to use the IP icon on the toolbar) nor specify "RAW". So I tried creating a "dummy" printer in the Add Printer dialog, with a basic config, and then changing it from the CUPS web GUI. This didn't work either, since when I went back to the Add Printer dialog, the printer was gone.
I'm new to Mac OS X, but have been working with Linux for almost 9 yrs now. I have set up a Linux box with CUPS 1.3.9. I can print from the server, and from other Linux stations to that remote server. However, I can't print from a client MacBook.
I set up CUPS on the client Mac via http://localhost:631 and created a printer associated with the remote queue / printer on Linux (the URL I use on OS X is http://mylinuxserver:631/printers/hpprinter and the driver is RAW).
I have no problems sending a test page from the CUPS web interface on Mac OS X to the Linux server -- the test page gets printed OK. However, I can't see the printer I just defined from other Mac OS X apps, and neither can I see it from the Add Printer Dialog on System Preferences (it's empty).
I tried creating the printer at the Add Printer dialog, but it would neither let me specify an HTTP URL (as far as I know, I had to use the IP icon on the toolbar) nor specify "RAW". So I tried creating a "dummy" printer in the Add Printer dialog, with a basic config, and then changing it from the CUPS web GUI. This didn't work either, since when I went back to the Add Printer dialog, the printer was gone.
I am on a Macbook Pro running OS 10.7.3, and until some time ago I was being able to print on a HP Laserjet P1102w shared over ethernet from a iMac running OS 10.5.8. Then something happened (probably as a result of an update) and I can't print on that shared printer any more. The error I get on the printer is that annoying /usr/libexec/cups/backend/dnssd failed, OR the "authentication required" message. The printer works just fine on the iMac.I tried several fixes posted here and there such as re-setting the printing system and re-adding the printer in both machines, tried to fix it over the CUPS interface,URL]Unfortunately nothing worked. I noticed two weird things: 1) When I try to change the settings in the cups interface at the iMac, it won't let me apply the changes, it's like it is locked... 2) When I pull out the console at the MacBook, the log for the time the error comes out is: kernel: IOSurface buffer allocation size is zeroCan
Info:
MacBook Pro (15-inch Early 2011), Mac OS X (10.7.3), OS 10.5.8.
i'm trying to print some stuff off using adobe and some parts are printing, but some aren't. I've had this problem before i would print of some formula sheets for my finance class and basically if it wasn't a letter it wouldn't print it off but now it's taking out a lot more.
in the first picture you can see how i went through and wrote the stuff in, wasn't that big of a deal.
second picture is one page from the file that printed out fine
third picture, the entire top part is supposed to have a paragraph on it.
Is there any thing available that will allow me to print to a PDF file? I'm trying to export something to a PDF file that does not have the feature as standard. I know it can be done in Windows as there are a few Print to PDF applications. but I can't find a Mac one.
View 2 Replies View RelatedI've discovered this weird thing and wonder if it's just my system. If I set the double click speed to its maximum value (System Preferences -> Mouse) I can no longer open with double click folders that are on my desktop while it still works from the finder. I got the same thing from the mouse and from the trackpad. I have OS X 10.5.6.
View 2 Replies View Related My work computer id acting up. I am running Mac OS X, using a standard, single-button mouse. The problem is, it doesn't want to simply click once and double clicks at random times. I'm not sure when it will happen next, but it's getting annoying. Also, it seems the computer is having trouble highlighting text. When I scroll over text to highlight, it will not stay highlighted. This makes quick copying and pasting impossible.
Keep in mind, this is a work computer and I would not be able to directly manipulate files. Also, our "IT" person usually guesses until she gets it right.
Note: I know that there are probably threads related to this topic, but I did not find any in my searches. I guess the forums match the machines when it comes to not finding what you need.
Need help to getting my HP printer(309c a series working with Lion 10.7.3 any advice??? Help please. I been all over HP and Image Capture not working or see it.
Info:
Mac OS X (10.7.3)
How do I continue to use my HP Photosmart C3100 series All-in-One for scanning with the loss of Power PC support? The scanner interface has been deactivated. I do not want to add a perfectly good printer to the landfill because of Apple's short sited approach.
Info:
Mac Pro, Mac OS X (10.7.4), Converted to Lion for use of Cloud.
My MacBook Pro with Lion sees my printer as a Photosmart C6100 series [964C01]. Says to "Print Using" Photosmart C6100 series. When I click add it tries to download the drivers however says the software is currently unavailable. If I try to add it manually using IP it says the update server is unavailable. The console log shows:
PrintUITool: Property list invalid 'for format: 200 (property lists cannot contain objects of type 'CFType')
Info:
MacBook Pro, Mac OS X (10.7.3)