OS X V10.7 Lion :: Macbook Pro Won't Sleep While Its Plugged In
May 31, 2012
I bought my macbook pro few months ago. Now i'm facing sleep problem while my laptop is plugged in. I searched on internet try all stuff. but still it won't work. I does my update regularly.i have format it and have to put LION again but i dn't wanna loss my all date and other setting because of this sleeping problem..Â
Mac detalis:Processor 2.2 GHz Intel Core i7Memory 4 GB 1333 MHz DDR3Graphics Intel HD Graphics 3000 384 MBSoftware Mac OS X Server Lion 10.7.4 (11E53) System report Battery Information: Model Information: Serial Number:D86130402XDDGDLA1 Manufacturer:
Just wondering, whenever I use my macbook unibody at home, I have it plugged in most of the time. When I take it to school, I don't bring my plug. When I go to sleep, I generally unplug it and put the macbook to sleep. Should I keep it plugged in even though I closed the lid whilst I sleep during the night? Or should I keep unplugged it every night when I close the lid?Also, I do calibrate my battery once a month. its at 93% after 43 cycles.
My Early 2009 aluminum macbook does not recognize headphones. when i plug in, noise continues to play through the speakers. When I sleep and wake it, the headphones are recognized. I am not sure about the other way around, but this is getting to be supremely annoying.
Just purchased and hooked up a WD 2tb MyBook Studio Edition II external HD, the drive spins down on the HD but my iMac doesnt sleep while its plugged in.
This is an odd, intermittent problem that started about a month or two after purchasing my fall 2011 MBP 15 (i7 2.5, 16GB RAM). This problem started, went away on its own, and now it's back after about two months of being trouble free.When I close my computer, it doesn't go to sleep.The slit light on the right front of the computer does not go into its slow flash mode; however, it does light up solid, and theng it stays lit.When I open the lid, the computer wakes up immediately (it was never "sleeping" to begin with), but then after a second or two the screen fades to black.The screen can be brought back to life by pressing either of the brightness buttons on the keyboard.I took it to the Genius Bar, and of course I couldn't replicate the problem for them.When I got back home, I decided to test the computer plugged in, and that's when the problem came back.I don't know why it went away previously.So, in summary: The issue only occurs when the computer is plugged in.The sleep problem existed before I installed 3rd party RAM and Parallels 7, and they exist now after I have installed the RAM and new software.I use a wireless mouse, and the little dongle has no effect on the sleep issue - the computer will not sleep (when plugged in) either with or without the dongle in a USB port.The battery charges just fine.All of my software is up-to-date, and I'm running OS X 10.7.3I have checked for the Flashfake malware, and I do not have it.I am running Sophos Anti-virus; I have done a scan, and have found no threats.They flashed my PRAM and ran some tests at the Apple Store and everything passed.
Computer will not come out of sleep mode (even when pushing the start button). I have to unplug and plug back in and and then push "start" switch to start computer. This has occured twice in a about one week.
I use my MBP 15" (the new one), as my primary machine in my office. I sit by my best usually 10-12hrs a day working on it.
I am trying to figure out what is best to do, keep the AC plugged in or have it un-plugged and only plug it in when the battery is drained (or less then 50%)? I have tried different experiments, plugged in, not-plugged and time is about the same for life of the battery. The true question is, how is is best to do it for the health of the battery.
I'm currently using the 13 inch Macbook Pro with the latest software. I noticed just today that the built-in microphone that comes with the laptop will not work when I plug in my headphones. However, as soon as I remove them, they resume working.Â
i have a little problem with the sleep light... i don't know when this started, but i notice today, that when i put my macbook pro to sleep, the light just stays on and not "pulsing" like it used to do... is that normal?
Info: Macbook Pro 13, Mac OS X (10.5.8), 4 gb ram, 2.53 ghz intel core 2 duo
My macbook pro (early 2011) won't go to sleep when I close the lid ever since I upgraded to Lion (10.7.4) from Snow Leopard (10.6.8). The computer will still sleep when I click on "sleep" from the Apple menu. The computer just won't automatically sleep when I close the lid.
I tried a number of things: 1. enabling/disabling internet sharing (don't have it enabled in the first place) 2. uninstalling Little Snitch 3. Delete printer queues. Also tired deleting all printers & resetting printing system. 4. SMC reset 5. Delete: Macintosh HD > Library > Preferences > System Configuration. Nothing works.
First off, apologies if this has been addressed in a previous post; went through a few pages and saw nothing that helped. I have been having problems with my i5 Thunderbolt 11" MacBook Air - running Lion 10.7.3 - reconnecting to my home network, which is listed as a Prefered Network, after being in sleep mode; especially after a long sleep, say overnight. Â
I know it's not my network because my 2.8 Core 2 Duo 15" MBP - running 10.6.8 - never has a problems reconnecting. I see other posts refering to a WiFi Update for other machines, but not the Air. And this was purchased with Lion, so while a re-install might solve the issue - again something I saw suggested - I would rather avoid the hassle. Â
I've checked with the "Apple people" at Best Buy - the closest thing I have to an Apple Store here in South Texas - and they say the recent update should have fixed the problem. Â Â [URL]..
I am on a 17" macbook pro using lion and my laptop wont go to sleep. I shut the lid and the screen turns off but I hear it still going and the light in the front doesn't begin to blink like it is suppose to. I have reset the pram and the smc and its still not working
I leave my Air on pretty much all the time, and put it to sleep while moving around etc. Sleeping it disconnect the Airport connection - which if very annoying. At a desk I've just been dimming the display all the way off in order to keep my connection.
However, I recently noticed that by setting a "sleep display" hot corner, my network connection is maintained.
I have 2 questions: 1) Is sleep display equivalent (functionally) to simply dimming the display all the way down? 2) Is there a way to either set up a shortcut to sleep the display (other than a hot corner) and/or set it so that only the DISPLAY sleeps after 'x' minutes?
I set the MBP to sleep in 10 min through the Energy Saver pref with the option to sleep the hdds. When it's about to sleep the screen dims, then turns black, then the sleep light comes on but does not blink no matter how long I leave it. The blinking only happens when I close the lid or when I select the Sleep option under the Apple logo. Is that normal behavior?
I have a macbook pro 13" early 2011 and I'm se as shown in the pictures (since i upgraded to os x yosemite) . It happens after display sleep or computer sleep on login not on boot up .I've noticed that i run out of ram when the problem appears (only 15MB RAM available out of 4GB), though i doesn't happen every time . I've talked to service and told me its either motherboard replacement or because the ram isn't enough (gpu shares with main ram) so maybe i should try upgrading ram. URL....
I have torrents going all the time. If the computer goes to sleep, the internet disconnects, so they stop. Display sleep wouldn't disconnect though. Is it OK to have computer sleep on "never" but keep display on "15 minutes"? I don't usually even leave the computer on overnight.
i tried mroogle and search but i couldn't find exactly what i was looking for and i know this community knows it all.
i am trying to prevent my new 2010 macbook pro from going to sleep when the lid in closed. i know there are programs that do this but they keep the display on as well. I wanted to know if there is a program that does it and has the option of turning off display. i am running snow leopard 10.6
Recently I've started connecting my 2.5GHz Intel Core 2 Duo (pre-unibody) Macbook Pro 17" to an external monitor (via DVI). Â
Since then my computer goes into Safe Sleep instead of Sleep (it's plugged into power). Â
This is an annoyance I'd rather avoid because even if all programs relaunch:I have to wait for them to launch (longer)Programs like Excel seem to have been quit in an unorthodox fashion: when it starts back up I get an error notice that it was shutdown inappropriately & the doc which reopens is a rescued version of the doc I had open before the safe sleep.Â
Of course i'll unplug it 2-3 times a month and run the battery down to condition it, but other than that, is it bad to leave it plugged in 24/7, including when not using it and it's turned off?
My white MacBook is not charging when plugged in. And if I take out the cord, the computer dies. I noticed this right after I had made a flight on an airplane so I'm assuming something happened while on the flight, even though I had my computer with me the whole time, and inside the case. I tried using compressed air to try and blow out any debris that might have got into the little charger port, but no luck.
I have had my MacBook Pro since May 2007. It has been working fine up until a few months ago. I will have nearly full, or fully battery and the computer will turn off, and will not turn back on unless I plug the charger in. If the charger is unplugged for 5 minutes, the computer completely shuts down. So basically I cannot use the computer unless it is plugged in. It is starting to become a pain because sometimes I need it when I am in a place without an outlet.
My 2.4ghz i5 MBP runs a lot better when using discrete graphics. Minimizing and maximizing windows, scrolling, opening folders etc... all run smoother with the 330M. Is there a way to always run the 330M when plugged in, and switch to automatic graphics switching when unplugged? This would be the perfect solution for me.
I recently upgraded my last-gen macbook to a macbook pro 13". I have a feeling there's something wrong with the battery however. On my old Macbook, whenever i let the battery drain completely (After I got the 10 minute warning message), the macbook went into hibernation until I plugged it in. However, on my Macbook pro, whenever I do the same it doesn't go into hibernation. Is there something wrong with my battery or have apple changed how this works?
My MacBook is about a year old. It has never had a problem with power or battery issues before, but now if it is not plugged in, it will work for a little bit and then randomly shut down (even with a full charge).
I've been told that I should replace its battery since it's been damaged. I haven't had the time or the money yet to buy a new one, and right now, I really need to use it.
