Web Sharing Does Not Start I can not find the file httpd.conf
They could give me another solution to avoid the problem of "Web Sharing Does NotStart After Update from Mac OS X 10.0"
Info:
Mac OS X (10.7.3)
Having issues screen sharing fails to start when I am using Messages beta and other party is using iChat?
Info:
MacBook Pro (15-inch Mid 2010), Mac OS X (10.7.3)
Internet sharing no longer works after Lion 10.7.4 update.
View 4 Replies View Relatedi just updated my 2.7 GHZ intel core i5 to lion 10.7.4 mac update today. About one hour later, my iPad 2 didn't have internet but had wifi. This problem was from my mac, as my iphone was having the same problem.
Info:
iMac, iOS 5
I have installed the latest update that Apple posted a few days ago on multipl computers. It seems that after the update, screen sharing still works, but instead of bringing up the shared screen in about 5 seconds as it used to, it now takes almost 30 seconds. This has happened for me on two seperate networks so I believe it is not network related. Something in the Lion update seems to be culpret. My 10.6 server machines still can be shared fine.
Info:iMac, Mac OS X (10.7.4), i7 16mb
Equipment: iMac 21.5" 2.5GHz Quad Core i5 Â
Internet Set-up: Cable modem to iMac EthernetÂ
Problem: After recent update to Lion 10.7.4, my Wi-Fi signal via Internet Sharing keeps dropping. Have multiple iDevices failing that were working perfectly with 10.7.3 (Nook and iPhone 4). iPhone shows full Wi-Fi signal strength and works for a short time after reset (via Wi-Fi off/on, Internet Sharing off/on). Continues to show full Wi-Fi signal strength but loses connection after 1-2 minutes. And not just internet connection; I can't transfer pics/vids from iPhone to iMac either. Have switched to a channel no one nearby is using (channel 9) to no avail.
Info:
iMac, Mac OS X (10.7.4)
I installed the new EFI update for my MBA Mid 2011 (the software updater said it is recomended). The update went fine and restarted the mac afterwards.Â
Then while booting the apple logo turns to a grey forbidden sign and nothing happens from there. I turned the mac off and tried again. Same thing.Â
Then I booted the recovery partition and tried to repair my disk. It says that it can't repair the disk because it is corrupted.Â
I have to erase the disk. There is some unbackuped data on it and I can't get it out using a linux-live because my disk is encrypted.
after the update from 10.7.3 to 10.7.4 , when system restart, the apple logo remains, and the mac will not start.
How can I do to solve this common problem of 10.7.4?
Info:Mac OS X (10.7.3)
My Mid 2011 iMac 27" i7 will no longer start after the latest EFI update. I decided to perform some system updated on my iMac and after installing 10.7.3, I rechecked and it found the EFI update and one other update. They were both pretty small (the largest was 3.6MB), so I decided to proceed prior to getting back to business with my system. After downloading the updates (took about 5 seconds), the machine proceeded to restart. There was a loud beep prior to the system restart chime after which it went to the grey-white apple startup screen with the spinning wheel. And it stayed there. After 35 minutes with no discernable progress, I decided something must be wrong. This system normally takes about 30 seconds to boot from a cold state (it's running on an OWC SSD) or maybe a minute after updates. So I held the power button to reboot. But it keeps going to the same state. I tried to reboot to a different internal drive holding the option key, but the same thing happens.Â
System Specs:
iMac 27" i7 3.4 Ghz (mid 2011) 12G Ram
Internal 1TB Apple HD
Internal OWC SSD 240G (main startup drive)Â
1. How do I recover from this?
2. Is anyone else running into this problem?
3. How long do the EFI updates normally take?
4. Shouldn't there be some sort of "progress bar" to indicate something is going on during this process? Or, if not, then perhaps a "WARNING!! This process will take up to two hours, during which you will receive no discernable feedback. Do not interrupt the process until more than 24 hours have passed with the spinning ball."Â Â
P.S. I think this is my last iMac EFI update. After my last iMac received an EFI update (2009 model 24" iMac), it became ultra-flakey and started corrupting HD's. It never worked the same after that. This machine was working PERFECTLY before the update.
Info:
iMac (27-inch Mid 2011), Mac OS X (10.7.3)
updated to 10.7.4 and cannot turn on my Open Directory service in Server Admin. It's there, but says it is stopped, and it won'y start.After reboot it is still the same.
View 3 Replies View RelatedI have a iMac as our main computer which has the main iTunes account. I have a ethernet connection off a Time Capsule/Air Play Wireless to that. I just got a Apple TV 2 and that has been working nearly seamlessly via a wireless connect from the Time Capsule The problem is with the Mac Book Pro (early 2011, 17", 2.2 ghz Intel Core i7, 8GB DDR3, AMD radeon HD 6750 1024 MB Graphics, all updated on all software)What my twist is that when I start to stream a tv show from iTunes via home sharing it will play for 5-20 min and then just stop and return to the main iTunes menu This occurs on TV Shows purchased from Apple, From DVD's I have ripped with HandBrake and Bit Torrents I have also ripped with HandBrake (Into Apple TV 2 format) I've read over and over the Apple suggested trouble shooting. The only non Apple product/software in the mix is Norton for Mac on the Mac Book and the iMac however I have turned off the Firewall on that as well as experimented with turning on and off the Mac Firewall I have a older router from my ISP however the Apple TV is working fine so I *think* that has been elminatedÂ
Info:
MacBook Pro (17-inch Early 2011), Mac OS X (10.7.3)
Late Thursday, Apple introduced its Migration and DVD/CD Sharing Update (40.3MB).
The fix is advised for all eligible Mac users and improves customization as well as performance for migrating data over Ethernet, FireWire or USB.
The update is applicable to both Mac OS X 10.4.11 as well as all existing releases of 10.5.
[URL]
Help my MacBook pro was doing an update when it went to restart it never came back on and seems to be stuck somewhere between sleep and on there is no lights but a faint white light on the case open button.
Info:macBook Pro intel core 2 duo 2.2ghz, Mac OS X (10.6.2)
Mac will not start up after software update, just screen with Apple logo and spinning icon? I have tried safe start up, unplugged all other cables, no luck?
View 1 Replies View RelatedAfter having updated my iTunes, I restarted my Mac. The battery then went out and now I can not start the machine. The screen is white with the apple, and a spinning wheel under it. How do I start my Mac?
Info:
MacBook Pro
I was just doing What I thought was a standard software upgrade of iPhoto when, during the restart it said something unexpected had happened or something like that and just froze. Now when I try to restart I get the white screen with the apple , then an error message "pnic(CPU 0 caller 0xfffff800064ba7b): unable to find driver for this platform: ..." and it keeps going on Another box says "You need to restart your computer. Hold down the Power button..." when I do this, it just comes back to the same place. Â
Info:
MacBook Pro, Mac OS X (10.7.4)
after install, only get the spinning card- no startup. tried all startup key combinations and zapped PRAM. also ran disc utility and hardware check- hardware is fine all I get is nothing. noticed others reporting problems with the update on another thread, but my mac won't even start up. do not want to have to reinstall OS and 3rd party apps. any suggestions? would it help to take to apple store geniuses- can they somehow bypass the update and get it started up?
View 2 Replies View RelatedI got a message to install the latest security update, but the updater froze when I told it to install. Now I cannot start any new applications or processes (activities like copying files, emptying trash, etc. don't work) The apps which were running before are still working (but once closed, will not re-open) I dare not restart or put the computer to sleep. (Possibly software update freezing was a symptom rather than the cause - it is consistent with processes failing to start) I guess this means a system file has been corrupted, but without a working copy/paste and no terminal I don't know what I can do about it. All I have is a browser (firefox) and finder running. Is there any way I can recover the system?
View 2 Replies View RelatedRecently I've been frustrated by having Mac OS X automatically downloading all software updates without asking. Sometimes I am on an internet connection where my downloading is limited and I don't want to be wasting the bandwidth on multiple updates that I don't need that urgently. I feel like earlier versions of OS X never started downloading the update without your permission to start the updating process. Is there anyway to ensure that the OS doesn't perform such tasks without having to resort turning off my wireless? I'm running 10.5.6 on a MacBook.
View 1 Replies View RelatedAfter doing a software update my flat panel G4 won't start up. Spent 30 minutes on the phone with Apple and nothing.
View 1 Replies View RelatedI can't update software because it says my start up disc is full..what now?
Info:
MacBook Air (11-inch Late 2010), Mac OS X (10.7.2)
but I just did a MacBook Pro EFI Firmware Update 1.7 to my MBP,and when I restarted the computer, the computer made unusual beep for a second before it was getting ready to boot,
im fairly new to the mac so i don't know if that's normal..
so the question is, is it normal for the macs to make that beep( not the starting sound) ?
I was trying to update my G5 to snow leopard from leopard 10.5.5 when it said it could not install. So I decided to quit installation and boot from 10.5.5. It started up and reaches the apple loading screen but goes off without reaching the log in screen. I have tried booting from the CD again and resetting the PRAM but it still wont work and continues to do the same
View 2 Replies View Relatedwhy don't java security update show up in software update? macbook pro with mac os lion
View 2 Replies View RelatedI updated with the latest Lion patch yesterday and since then Entourage has either hung or taken a very long time to update from our 2003 Exchange server (I have MS Office 2011 but as you're probably aware, there are issues integrating with a 2003 Exchange server). how this might be fixed, short of updating both our 2003 Windows Server to Windows Server 2008 x64 and Exchange to 2010 so I (the only Mac user out of 85 staff) can use Outlook 2011?
Info:
MacBook Pro, Mac OS X (10.7.3)
My wife macbook pro os 10.7 don't show the java security update in software update
View 2 Replies View RelatedStarted the 10.7.4 install, and it halted. Turned my Mac off, started it back up, and apparently the 10.7.4 update didn't install, but it has caused the Mail function to not work AT ALL - I get a long error report that is auto sent to Apple.Â
I downloaded Lion from the Apple store, but have my Snow Leopard disk. How do I go about re-installing Mail?Â
Info:
Mac Book Pro, Mac OS X (10.6.5), 2.93 GHz Core 2 Duo 4 GB 1067 MHz DDR3
Ok, my once a week auto Mac auto update just finished and now my itunes 10.6 will start then crash as soon as it opens. Error report as followsÂ
Process:Â Â Â Â Â Â Â Â iTunes [746]
Path:Â Â Â Â Â Â Â Â Â Â Â /Applications/iTunes.app/Contents/MacOS/iTunes
Identifier:Â Â Â Â Â com.apple.iTunes
[Code]....
If you want the rest of the multi page thread I will paste it.
I have tried restarting the machine and no dice. I thought of reinstalling itunes from apples site but each time I go there its says congrats on downloading it but will not download a single thing. On the problems downloading its only gives me answers to PC problems. Â
Do I really have to completely reinstall from my iMac install discs just to get itunes back ? I dont use time machine as I have a 1T hardrive in my imac and use most of it for itunes, even I cant afford a 1T stand alone hard drive just for backups.
Info:
iMac, Mac OS X (10.6.8), Just did the weekly auto update.
"Software Update can't connect to the Update Server" - so I can't even check to see if updates are available.This has been going on for sometime. For a while if I created a new admin account and used that it would work, but not today.Tried creating a new admin account but to no avail.
I clcik on the Apple Icon, (top left hand side of screen), click on SOFTWARE UPDATE, it runs for a split second, then: [URL]after which I check my internet connect to see that it's fine. (And I attempt to run SU with nothing else using the internet). [URL] I've checked the forum and found a few people with the same problem. I've tried deleting PLISTs and using 008.008.008.008 DNS address, [URL], but still cannot get it to work. I still have my old G4 Power running OS 10.5.8 connected to the same modem (Netcomm NB6PLus4w Modem which has 4 ports) as my Mac Mini, and it runs Software Update without any issues. So it's not my internet connection and it's not the Apple server, so it's something about the Mac Mini that's not right.
Mac-Mini 2.4 GHz Intel Core 2 Duo - OS 10.7.2 - 8GB 1067MHz DDR3 Memory.
Info:
Mac mini, Mac OS X (10.7), Netcomm NB6PLus4w Modem
When I try to update my mac i get the following error:Â
"A network error has occurred. Check your Internet connection, and then try again." Â
This has been happening for over a week now. Looking at the Console I get the error:Â
"4/10/12 8:03:54.398 AM Software Update: Error: The operation couldn’t be completed. (NSURLErrorDomain error -3001.) (NSURLErrorDomain code -3001)"Â
I've verified and repiared disk permissions a couple of times and restarted the system with no success.
Info:
MacBook Pro, Mac OS X (10.7.3)
