but I just did a MacBook Pro EFI Firmware Update 1.7 to my MBP,and when I restarted the computer, the computer made unusual beep for a second before it was getting ready to boot,
im fairly new to the mac so i don't know if that's normal..
so the question is, is it normal for the macs to make that beep( not the starting sound) ?
I tried to boot up my MacBook pro and it make a beep sound. Screen is blank.
Info:
MacBook Pro (15-inch Mid 2009), Mac OS X (10.7.3)
Superdrive Firmware Update 3.0 fails each time, /Applications/Utilities/SuperDrive Update.app asks me to quit all apps and try again which I did but of no. I also retried with a reboot.
Info:
MacBook, Mac OS X (10.6.8)
My Macbook is awesome, absolutely no complaints except for this loud "Ding-dong" noise that comes at really random times. It's sort of fuzzy, like a recording on a cell phone (which I'm sure it's not), and it's just a higher pitched beep then a slightly lower pitched beep.
I've searched everywhere and I haven't found any posts or anything at all like this. I can have no applications open, other than background processes (I'll list those below) and it'll make the noise. So I sort of assume it's either some ridiculous Leopard malfunction or that it's one of the Preference Panes I have installed. If anyone has this same problem let me know, I'm going to start recording exactly what's open whenever it makes the noise and try to find something in common between them.
I was wondering whether to update the nvidia drivers from time to time, is this done through and included in the normal 'software update' from the top-left apple menu bar or do I have to go to the nvidia site and manually update each time?
View 14 Replies View RelatedWhenever I try to start up my iMac all I et is a series of 3-tone beeps repeated endlessly and I can't get it to start up. Also now the apple repair disc is stuck in the drive and I can,t eject it.
Info:
iMac, Mac OS X (10.7.3)
can somebody make a boot cd dos and include a firmware (192kb) for flashing i would send ?!
View 1 Replies View RelatedAnyone else experiencing this? My fans have been going pretty much nonstop audibly since the 10.6 install. The "normal" for the fans is about 2000rpm, and now they RARELY dip under 3000, and the "new norm" is a very audible 4000-5000rmps.
This is SO annoying! Anyone else?
If rev C runs the GPU at a higher speed and hw otherwise is the same as rev B then why couldn't Apple release a firmware update to let rev BGPU rum faster as well?
View 18 Replies View RelatedJust got this through Software Update. More info here:
[URL]
Quote:
About MacBook Pro EFI Firmware Update 1.8 This update eliminates the noise made by the optical disk drive during system startup and wake from sleep on MacBook Pro computers. When installation is complete, run Software Update again, and install SuperDrive Firmware Update 3.0
To complete the firmware update process, follow the instructions in the updater application (/Applications/Utilities/MacBook Pro EFI Firmware Update.app). The updater will launch automatically when the installation is complete.
[URL] MacBook SMC Firmware Update 1.4 is available either through Software Update or via direct download, and is applicable to the following models:
MacBook (13-inch Late 2007)
MacBook Pro (17-inch, Early 2008)
MacBook Pro (15-inch Early 2008)
MacBook (13-inch, Early 2008)
MacBook (13-inch, Late 2008)
I finally brought the 13in macbook air. What are some good softsleeves for macbook air 13in. I want a soft sleeves that fits perfectly with macbook air and below $30. Is it possible?off topic: this is my first mac computer, how do I update the firmware to 2.0?
View 1 Replies View RelatedAfter the update, my MacBook Pro is extermely sluggish. Prior to the update, I was zipping along like most happy MacBook Pro owners. After the update, I constantly see the dreaded beach ball when doing almost anything with the laptop, Safari pages take longer to load, etc.
It's almost as if the udpate had the opposite effect and actually throttled down my WD 500GB HDD performance to a large degree.
Like I said, prior to the update all was good. I've been searching to see if there is a way to revert back to the previous firmware to validate that the update caused the problem but I haven't been successfull in finding anything yet.
I currently have version 10.6.2 update for my macbook pro and after updating the EFI firmware update to 1.8 I get an annoying pop up every time I start the computer. I checked for any additional updates to see if it will go away, but I seem to have all the updates. Is there anything I should do to get rid of this pop up? Pop-up window reads: your computer's firmware is up to date with version 1.8 of the macbook pro EFI firmware update.
View 1 Replies View RelatedJust downloaded new firmware at suggestion of my auto-update app. Since loading, the computer has been trying to reboot for over 45 minutes so far. Grey screen w/ Apple logo and spinning grey wheel...The firmware update info says not to turn off, unplug, etc until rebooted.
Info:
mbp, Mac OS X (10.5.2)
Installed the 2.8 firmware update on my late '08 macbook pro and after restarting it, it would just beep 3 times and not start up. I pulled my 8 gig kingston ram out, repositioned back and still the same issue. Slapping in the original 4 gigs of apple ram, it will start up and work fine though. Is there a fix to get the 8 gigs working again on the machine?
Info:
MacBook Pro, Mac OS X (10.6.8)
I just ran the latest firmware update for my 2011 mac book pro and after it installed it now won't start up, only getting to the gray screen before freezing there.
I've tried all the on line solutions I can find on Apple's site, but no luck.
Info:
MacBook Pro
MacBook Pro EFI Firmware Update 2.8 does not install. I was prompted several times to install and restart (MacBook Pro late 2008) and authorised it each time. In every case, the update was proposed again when Software Update checked. I have OS Lion latest version installed. What to do about this bug?
Info:
MacBook Pro, Mac OS X (10.7.2), photos in Sony Cyber-Shot .jpg
Are there any known compatibiity issues with booting from an OS 10.6.x drive after installing EFI Firmware Update 2.5?I am running Lion (10.7.3) on my MacBook Pro (13-inch, Mid-2010) but have held off installing the firmware update because being able to boot from a 10.6.x backup drive is more important right now than internet-based Lion recovery. If there's no issue booting 10.6.x (and running apps), then I will go ahead and install the firmware update, otherwise I'll wait awhile longer.
Info:
MacBook Pro (13-inch Mid 2010), Mac OS X (10.7.3)
I've been having an issue trying to install the recent MacBook Air EFI Firmware update version 2.9.1. I have attempted the following:
- Installing update via the App Store
- Installing update via Software Downloads from Apple website
- Verifying boot drive using Disk Utility and fixing and partition errors, as well as checking and fixing any permission errors.
Info:
MacBook Air, OS X Mavericks (10.9.4)
I did the latest firmware update few days ago and went through that series of boots. It's a shame on me that I didn't jog down the ROM revision info before the update. According to the this link:
[URL]
The FM Rev should be MBA31.0061.B01 after the update.
My MBA 13 is still read MBA31.0061.B00 after I thought I did the update. Does that mean the update didn't go through?
Will updating that firmware bring me trouble if I do it through Parallels?
View 4 Replies View RelatedThis came out yesterday. I have seen no comments anywhere about it so I started this post. Did you update your Macbook? [URL]
View 4 Replies View RelatedI have a uMBP 13' base model. I just received my Western Digital scorpio blue 500g hdd that is SATA 3.0. Should I install the new firmware update before I load anything onto the drive so i can utilize the 3.0Gbps instead of the 1.5Gbps? Should I install it at all? Will I notice a performance bump? I also received 4gb crucial ram, should i install the ram before installing the firmware update? I was wondering if anyone else noticed the screen slightly getting brighter and dimmer, almost in intervals, when it is not plugged into the power cord.
View 4 Replies View RelatedThis update eliminates the noise made by the optical disk drive during system startup and wake from sleep on MacBook Pro computers. When installation is complete, please run Software Update again, and install SuperDrive Firmware Update 3.0. When I boot my system I can hear that sound like ejecting a disk out of the drive like always... Is that noise they refer?
View 24 Replies View RelatedI'm confused why it says "Your computer does not need this update"? It's a MBP4, 1 and has some startup noises and (always has had IIRC) problems with it making noises that don't seem right. I've checked Software Update and there is nothing there (I just ran it and updated a minute ago). I'm curious why it says this, is there a firmware update 1.7 that needs to be installed for the MBP?
View 6 Replies View RelatedI have a macbook 2.4 alu (Late 2008) and Installed linux as soon as I got it.(I just like the cases). Anyway I know that you need to use apple update in osx to update the firmware. I can't dual boot because my HD is MBR. I thought of 2 ways.
A. Install OSX onto a usb device (Cost 30-40 bucks for usb)
B. Take to apple store, Maybe they can do it.
I can't dual boot because my HD is MBR. I heard the new firmware updates stop a lot of issues.
My macbook pro 17 2011 late 2.4 i7 keeps rebooting when I try to update the latest efi firmware. Have to force shut mac and restart and abort installation?
Info:
MacBook Pro, Mac OS X (10.7.3)
Did everyone notice a significant slowdown of network speeds (wireless at least) after installing this update [URL] on a 2011 MacBook Pro (2.0 i7 15")
Info:
MacBook Pro, Mac OS X (10.7.3), 2011 15" 2.0Ghz
I installed the EFI Firmware update 2.8 on my late 2008 MBP (running 10.5.8) and so far, it's seemed to solve the flicker/screen blacking out issue. I can no longer take screen shots any more without them being corrupted, and sometimes the Finder window gets scrambled and my wife needs to re-boot. I'm guessing a corrupted pref file somewhere. Anyone run into this recently and if so, is there a .plist file I can delete?
View 2 Replies View Related