OS X V10.7 Lion :: How To Set Up New MBP To Use D-Link Print Server
Feb 2, 2012
MBP found 2 of my 3 printers right away. Tried manually configuring the 3rd which is an older HP Laserjet 1320 connected via USB to a D-Link print server. In Win you config using the IP address and port name. Configuration appeared to work but nothing gets sent to printer. If this is an easy fix I would like to go that route but if the print server hardware is too old please suggest good alternative that will work for both Windows and Mac systems as I have both in the house.
I'm using a MacBook, Mac OS 10.5.8. I've downloaded the driver for HP LaserJet m1319f MFP and the printer worked fine when I connect it directly to my MacBook (using USB connection).The problem is that printer is supposed to be connected to our office network users through a TP-Link Print Server (TL-PS110U). I've tried to use AppleTalk to connect to that print server but my MacBook only recognized that HP printer as a HP Fax machine and I can't print anything.
I have had difficulty in attaching my HP Photosmart C5580 printer to my new MacBookPro (OSX 10.6) through my Netgear WGPS606 print server. After much searching I found previous posts here which advised me to add the Gutenprint driver 5.2.6 which I did. That finally DID successfully attach the printer through the server.
However, there is a lag of many seconds (sometimes minutes) between the SEND command and the starting of the printer. Is this the new normal that I need to expect or is there a fix?
I'm new to Mac OS X, but have been working with Linux for almost 9 yrs now. I have set up a Linux box with CUPS 1.3.9. I can print from the server, and from other Linux stations to that remote server. However, I can't print from a client MacBook.
I set up CUPS on the client Mac via http://localhost:631 and created a printer associated with the remote queue / printer on Linux (the URL I use on OS X is http://mylinuxserver:631/printers/hpprinter and the driver is RAW).
I have no problems sending a test page from the CUPS web interface on Mac OS X to the Linux server -- the test page gets printed OK. However, I can't see the printer I just defined from other Mac OS X apps, and neither can I see it from the Add Printer Dialog on System Preferences (it's empty).
I tried creating the printer at the Add Printer dialog, but it would neither let me specify an HTTP URL (as far as I know, I had to use the IP icon on the toolbar) nor specify "RAW". So I tried creating a "dummy" printer in the Add Printer dialog, with a basic config, and then changing it from the CUPS web GUI. This didn't work either, since when I went back to the Add Printer dialog, the printer was gone.
I'm new to Mac OS X, but have been working with Linux for almost 9 yrs now. I have set up a Linux box with CUPS 1.3.9. I can print from the server, and from other Linux stations to that remote server. However, I can't print from a client MacBook.
I set up CUPS on the client Mac via http://localhost:631 and created a printer associated with the remote queue / printer on Linux (the URL I use on OS X is http://mylinuxserver:631/printers/hpprinter and the driver is RAW).
I have no problems sending a test page from the CUPS web interface on Mac OS X to the Linux server -- the test page gets printed OK. However, I can't see the printer I just defined from other Mac OS X apps, and neither can I see it from the Add Printer Dialog on System Preferences (it's empty).
I tried creating the printer at the Add Printer dialog, but it would neither let me specify an HTTP URL (as far as I know, I had to use the IP icon on the toolbar) nor specify "RAW". So I tried creating a "dummy" printer in the Add Printer dialog, with a basic config, and then changing it from the CUPS web GUI. This didn't work either, since when I went back to the Add Printer dialog, the printer was gone.
The website where I pay bills online has a hot link that says "print" and when I click on it, the printout is in a teeny tiny font.
The document that I print after paying each bill is the confirmation of the payment transaction. But it's almost too small to be read without a magnifying glass.
I can't find where or how to increase the font size of the printout. Firefox preferences doesn't include any sort of font size preference to choose from; and my printer application in Settings doesn't list font sizes to choose from or to set as my default size.
PageSetup allows me to choose a paper size, but not a font size.
My computer is an iMac G5; MAC OSX 10.6.8 My printer is a Canon MX850
Info: iMac, Mac OS X (10.6.8), Printer is Canon MX850
He has a PowerBook G4 with OS 10.4 on it. He is in a house that has an HP OfficeJet Pro L7680 connected to a wireless print server, a D-Link DRP-1260. He cannot get the PowerBook to print anything. There are a couple of PCs that have connected and printed with no problem, but he cannot get the Mac to do so. I assume there is some setting that is wrong.
I'm new to Mac OS X, but have been working with Linux for almost 9 yrs now. I have set up a Linux box with CUPS 1.3.9. I can print from the server, and from other Linux stations to that remote server. However, I can't print from a client MacBook. I set up CUPS on the client Mac via http://localhost:631 and created a printer associated with the remote queue / printer on Linux (the URL I use on OS X is http://mylinuxserver:631/printers/hpprinter and the driver is RAW).
I have no problems sending a test page from the CUPS web interface on Mac OS X to the Linux server -- the test page gets printed OK. However, I can't see the printer I just defined from other Mac OS X apps, and neither can I see it from the Add Printer Dialog on System Preferences (it's empty). I tried creating the printer at the Add Printer dialog, but it would neither let me specify an HTTP URL (as far as I know, I had to use the IP icon on the toolbar) nor specify "RAW". So I tried creating a "dummy" printer in the Add Printer dialog, with a basic config, and then changing it from the CUPS web GUI. This didn't work either, since when I went back to the Add Printer dialog, the printer was gone.
We're wanting to get a HP Photosmart C3180 All-in-One inkjet printer shared on a network. I bought a Netgear PS121 USB 2.0 printer server which worked with the HP printer and I was able to print to the printer through the printer server over the network from a Windows machine. I tried printing to the same print server from a Mac-mini running OS X Tiger with no success. It appears the HP Photosmart print driver I installed on Tiger didn't install a PPD in CUPS to allow for network printing. When I connect the Photosmart printer directly to the Mac-mini, I can print just fine. When it's connected to the print server, the print server rejects the print job.
When I define the print server to the Mac-mini, Tiger wants to use the Generic Postscript driver. I define the print server using the IPP printer definition area.
I tried installing Bonjour for Windows XP on the Windows machine and using that to print to the HP Photosmart printer when it was physically connected to the Mac-mini and I WAS able to print a test page once but I made the stupid mistake of changing the printer driver on Windows that was setup by Bonjour and I haven't been able to print to the Bonjour shared printer since.
I am trying to find a print server that works with the epson sx200 all in printerThe netgear ps121v2 looks OK however netgear do not list the printer as being supported same is for the d-link server.Epson only recommend there own server at �140 mmmm !!!!As any body tried the netgear or d-link with this printerPS I only have one printer which I want to share with my imac and macbook pro via a netgear wireless router
I have a server in our DMZ that connects to Active Directory LDAP server (non-ssl over 389) but no objects actually show up in the directory editor. I get a green light in my Network Account Server, but queries against LDAP return no results. My end goal is to be able to dictate to Profile Manager what LDAP groups are allowed to enroll devices. I tested on our internal network on a test server and get the same results. Anyone have any luck connecting a Lion Server to LDAP and actually being able to view and utilize users and groups?
Snowcat won't even see my HP LaserJet, which is connected to an ethernet hub through an old Farallon AppletalkToEthernet adapter. I think it's because Appletalk is no longer supported, but would like an expert opinion on that. Assuming that's the case, i figure a new print server attached to the parallel port would do the trick. Problem is finding one that doesn't say it requires Windows.
I have tried to connect to a Netgear WGPS606 wireless print server. I cannot get any document to print to it. The computer recognizes both printers that are connected to it and will print to each one if they are directly connected to the computer, however, I am unable to connect to the print server. Has anyone done this? I have contacted both Apple and Netgear and no one at either place
I work in a school and to be quite blunt people are taking the michael with printing and it is costing the school a fortune in ink and toners. This is something that I really want to control. I have tried setting up print quoats but this just doesn't seem to want to work.I was wondering if there are any dedicated pieces of software on the market that would allow me to control printing accros the school?
Tiger to Snow Leopard and then found out I had lost my connection to the Netgear WGPS606 Print server that for years has served me flawlessly to use my HP Photosmart 8100 printer. Apparently it has something to do with Apple having removed support for Appletalk (???) Searching the web and Netgears website I can only find the instructions for Tiger, which I already had back when I first set up the print server.
I have recently upgraded from Snow Leopard to Mavericks and am now having problem with my hp 4500 office jet printer. The print icon tends to stay on the dock after the print job is done and then mess up the print queue. Even worse if I forget to cancel it manually then when I put the computer on 'sleep' the printer starts up again and the whole job is rerun unless I get to cancel it quickly on the printer!
It does not always do this (the print icon disappearing as it should do), but for 90% of the time it does.
I need to substitue a word/phrase with a web address. Example: Go here where when clicking on here opens a website. Is there an easy way to do this within a a website? I run a bulletin board and reference websites. I would like to put a word or phrase instead of teh website address.
I have installed Lion Server with Web and Profile Manager services. When I log into the profile manager web page I receive the message "Not Found The requested URL /wiki was not found on this server."
I recently updated my Server running 10.7.0 to version 10.7.3 and single-sign-on no longer works for my users. The 10.7.3 Lion Server System is bound to our Active Directory Server running on Win2003 R2 Server. I tried un-binding and rebinding the system but.. no luck. When a user now tries to login to our shares via AFP with SSO credentials they recieve the message
I can run the id command from terminal on the OS X server and it is seeing AD users. Unfortunately, no one can log into the server shares via AFP with an AD user.
I am desperate for help because whatever I do I cannot get my own certificates to work. When I first set up Lion Server a so-called Intermediate CA and a corresponding SSL server certificate was automatically installed and that works fine. Now, I wanted to create my own Certificate Authority (CA) and a leaf SSL server certificate.[URL]First I created my own CA, and then I created a new certificate with the Server App (ID type "leaf", certificate type "SSL server". (see screenshots below), and I had it signed by my own CA. When I checked the certificate it said "valid".Next, I exported the certificate from the keychain (as .p12) and then I went to Server App's "Import a certificate identity" to drag and drop the certificate onto the window. So far so good.
When I opened the list of certificates (Server App -> Hardware -> SSL -> Edit ) the new certificate showed up once, and after the Server App had tried to install the certificate it simply did not show up any more. I have copied the important parts of the certificate below (private parts have been cropped).The common name and the DNS name are "myserver.domain.private", and yes, DNS is working fine.(I stopped started services and re-booted in between creating and importing the new certificate.)
I don't understand how it happened, but a school I work with has had the SUS rip through 80Gig in a few days (Snow Leopard Server 10.6.8). Same as with my home server (Lion Server 10.7.3).
Since installing Filemaker Server 12 on our Lion Server 10.7.3, the Webmail is no longer working. I know with previous installations of Filemaker Server I have been asked whether I wanted to keep the system version of PHP or install PHP which comes with Filemaker Server, but I don't recall being prompted about it on this occasion. Previously I had always opted to retain the system PHP.
[code]...
And from the WAN I get just a screen saying webmail is turned off and that I can turn it on by using the Server app on the server (It is already checked in the server app).
Info: Mac mini Server (Mid 2011), Mac OS X (10.7.3)
With any Unix machine, one can run at the command line:- apachectl -S This will show all virtual servers configured in Apache, and will break if there are any obvious problems in the httpd .conf files. It's very handy for testing a new configuration before restarting the server. With Mac OS X Server though, this doesn't work properly. Sure, I can run that command and see a virtual server or two, but with the introduction of the server Apache wrappers, the command line tools read a very different configuration than the `serveradmin` tool does.
e.g. Wrappers like:-<IfDefine MACOSXSERVER> .... </IfDefine> or <IfDefine WEBSERVICE_ON>
[code]....
ps. Running `sudo serveradmin stop web && sudo serveradmin start web` really compared to `apachectl graceful`; it's painfully slow and doesn't provide a way to test a custom configuration before attempting to restart.
not quite so dire if you clicked this wondering ??? And why is this bing posted on Server forum? Well it happens to be on a server and I am trying to iron out what happens when you completely trash the system and start over. This problem occured in a subdirectory on one folder. It (the triangles ->) are there for all the other folders. However, there is one folder I had on a backup (backup, meaning still being a previous version of Lion) that at one point that any group of folders I place into it. there is no browsing triangle that lets you go down furthur. Yes you can open the folder and go further in, so its not prefs that I am aware of.
At this level...Triangles Here Still? Triangles still here. (Must say in Cookie Monster voice if you've watched the "Cookies done yet" bit you might giggle or at least be mildly annoyed.)
If you browse from this part of the hierarchy you get the expected behavior...Triangles Here Still? Triangles still here. however if you open the folder here is what you get...Triangles Here Still? (uh oh).
[Code]...
Anyway, sorry for the "less professional" candor of this post, but I have kids and a wife, and they think I am boring at times, and I love them - and while I am struggling with this, I am thinking of them, and obviously not with them. Ok Universe, this is where I need you the most: I'm counting on you do to something or say something to make it all better. Ok...Go
I know this issue is kind of old, but there are so many flavors of it, that it is hard to find exact match. I've been having problems with single account, and it happens that this account has admin rights. Emails get pulled/deleted from user's mailbox within 10 secs after arrival. There are no other devices that may be pulling those emails, however, I've noticed something strange in the logs:
I don't know if this event is normal to run on server itself, but seems it runs only for this one account that I'm having problems with. There is no imap client setup on that server, and based on my time stamps observations I'm pretty much convinced that's what's deleting my emails.
The girlfriend and I are consolidating machines and want to try a software based approach instead of a plug and swap approach. My goal is to have only a Desktop + iPad and she have her MacBook. The issue is that we also want to keep it limited to one monitor, etc. on the desk but she is in grad school and will have need for the larger screen and keyboard. My question is can I set up her laptop to use a Mobile Account and assuming she logs off on that before going onto the Server, can she then log in to the Server desktop and use that Mobile Account locally there? So sometimes use the Mobile Account on the laptop, Sometimes on the Desktop. From my days managing a small network, this seems plausible but could also be fraught with problems.
