Mac Pro :: Internet/Ethernet Network Connection Slows To A Crawl?
Apr 1, 2012
The last few days I've had a problem where the Internet network connection speed on my Power Mac slows to a crawl (about 1Mbps) and can only be fixed by re-starting the Mac which restores normal connexction performance for a while. The Internet connection runs at around 35-37Mbps and is routed via a BT HomeHub 3. The laptops which connect via WiFi don't show any slowdown in speed tests, only the Mac Pro, which is connected to the Hub via Ethernet. I've tried swapping between the two Ethernet ports on the Mac but it doesn't make any difference. The HomeHub has been in for about 5 months but this problem has only just started in the last week or so and the period for which the restart restores the network performance seems to be decreasing. Is there any way to reset network software, or some prefs I could delete? It's an early 2008 eight-core Xeon MacPro running 10.6.8, 8GB RAM.
Info:
Mac Pro, Mac OS X (10.6.8)
View 1 Replies
ADVERTISEMENT
Jul 25, 2009
Don't know what has happened, but my Internet connection seems to have slowed to a crawl. I originally thought it was Safari - but it's slow on Mail as well.
What could cause this?
I have booted on another partition and it's lickity split - but I have none of my settings on ot.
View 3 Replies
View Related
May 25, 2012
I have a mid 2011 27" imac. Ever since I've had this computer, my wifi works fine for the first 5-10 min when I turn the computer on, then after that it starts to slow to the point where it takes 2min to load a page. Then I have to wait about 15min for it to start working properly again.
All the other wifi devices in my house (ipad, laptops) do not have this problem at all so it must be the imac and not the connection. I'm running the latest version of Snow Leopard 10.6.8
Info:
imac i7, Mac OS X (10.6.5)
View 5 Replies
View Related
May 22, 2012
When I close my macbook pro whilst it is connected to an external monitor the internet connection slows down?
Info:
Mac Pro, Mac OS X (10.6.7)
View 3 Replies
View Related
Nov 23, 2009
I am sure this may have been asked before , but I am having a problem finding an answer. I have an iMac (2008) and my wife has a ACER E500 PC (No WiFi connection), running Windows XP Media Edition. The only internet connection we have is to my iMac, so as both my iMac and my wifes PC both have Ethernet connections , I am trying to share my iMac internet connection to my wifes PC via an Ethernet cable, I am having no luck in getting it working.
View 4 Replies
View Related
Jul 5, 2012
I have a MacPro Early 2009, 2 ethernet ports.Ethernet 1 is connected to the LAN and Ethernet 2 is connected directly to a SSL Matrix console (an audio mixer), whom driver needs the used ethernet port to be first of the list in the Network connections list in System Preferences.So when I browse internet I can't use the Matrix's software, and vice versa.I had to create 2 different network positions to browse internet and to work with SSL Matrix, one with Eth 1 first place, another one with Eth 2 first place, and I always have to swap positions.Is there a way to force OSX to use by default the 2nd connection of the list for internet access?
Info:
MacPro 4,1 8-Core 2.26 GHz, Mac OS X (10.6.8), 12Gb Ram
View 5 Replies
View Related
Dec 27, 2010
ive successfully done this before with 10.5 and xp and am trying to replicate with 10.6 and win7.
my imac connects to internet via airport. i want to share that internet with a win7 box via ethernet cable. i've turned on internet sharing in sys prefs but to no avail.
View 5 Replies
View Related
Dec 7, 2014
My network connection keeps switching to ethernet. When I open Network Utility, it shows the ethernet connected. I switch it to wifi and it keeps going back to ethernet.
Info:
MacBook Pro, OS X Yosemite (10.10)
View 1 Replies
View Related
Apr 26, 2008
I have an ibook with Leopard installed and its connected to the internet through airport. What I'm trying to do is share the internet connection to my xbox via an internet cable but i cant find any settings in system preferences to do that.
View 5 Replies
View Related
Apr 19, 2009
How to connect my powermac g4 to the internet. I was told that it has the "built-in ethernet" and that all I need to do is config it so it will pick up the wireless signal from the router on the main family computer. But whenever I go to config the network connection, and check the status, it tells me that the built-in Ethernet is not plugged in. Do I not have the built in ethernet? I just want to connect to the internet, but I don't want to spend over $120 to have geeksquad come and do it if I can just do it myself.
View 2 Replies
View Related
Apr 18, 2010
I currently have MacBook 13" and iMac both running on Snow Leopard. I have no problem connecting to the internet via Airport Express wifi but if I have to connect directly to internet from Ethernet port using Ethernet connection I can't connect to it. The Internet and Server lights are showing "amber" in the network diagnostic tool.
The modem is the DLink DSL 302G. I have used http://10.1.1.1/ to ensure the username and password of the ISP are correct. What I don't get is if it works via Apple's Airport Express router why wouldn't it work with straight Ethernet connection from the modem?
View 5 Replies
View Related
Mar 5, 2012
I know this has been a wifi issue for many, but this is occurring with ethernet as well on our iMac 2.93. Only began with Lion update. All other 5 Macs (Snow Lep/Lep/Tiger) and several PC's on network have no problem. Have set iMac's internet connections to static/manual ip. Worked for a few days, then back to dropping. This is obviously an OS issue.
View 1 Replies
View Related
Jun 12, 2012
Now, the internet connection to my macbook pro stops working. The MBP is 4GB memory with intel core i7, with OS X Lion 10.7.4.
It shows that the ethernet is active. But it can not connect to the internet.
I tried to unplug/plug the ethernet cable; and renewed DHCP lease;use the same ethernet cable for another computer and it works for the other pc.
But for my MBP, it still does not work.
Info:
MacBook Pro, Mac OS X (10.7.3)
View 2 Replies
View Related
Mar 24, 2009
I connect to the internet mainly through an ethernet cable, connected to my own base for ethernet connections (Might be a router, but doesn't connect directly to the internet) which is connected to the main Linksys router on the other side of my house, which even has a wireless connection.
Regardless, this setup has worked without issue for a long time now, but all of a sudden now, I cannot connect to the internet (On my Mac).
I have tried unplugging the routers, for extended periods of time, plugging them back in, but I cannot connect to the internet. Whats awkward, is that when I check the Network settings in the System Preferences, it says clearly is that the Ethernet Cable is connected (Which it is), and as a backup, I have even connected to my Wireless Network through AirPort (Which says it is connected), but I cannot connect to the internet through Firefox, or any instant messaging service.
On the main computer, with the main router, the internet works fine. When I try to load Firefox on my Mac, it sometimes takes a long time loading (On a blank screen), and never loads usually (With occasional loads, but usually does not connect).
View 1 Replies
View Related
May 28, 2012
After switching to a new provider and getting a new dsl modem (a fritz!box fon 7390) I tried to setup my homenetwork again. Now the weird thing is: my Mac Mini running OSX Lion Server doesn't seem to be able to connect to the internet over its ethernet port, only when using a WiFi connection...When it's connected with ethernet it can reach the dsl modem without any problems, but it can't ping/telnet or anything else through, only over WiFi... As long as I use the mini servers WiFi connection everything works fine, but that doesn't make any sense to me.I've checked the servers setting and the Fritz!box settings and I can't seem to find anything obvious. Of course I could just go on and use the WiFi connection...
ps: all the other computers can connect fine using either wifi or regular lan connection... I even tried the exact same cable with another laptop just to make sure...
Info:
various
View 1 Replies
View Related
Jun 29, 2012
I am on a Mac Mini connected to the Net via a FON wireless router and Ethernet directly to my broadband modem. I have had problems with both the modem and an Airport Extreme, which eventually died, but I am back up again with the modem via the FON router.The odd thing is that I can't get Ethernet to work over a direct connection to the modem. Diagnostics tells me that the ISP and Internet fails. I can connect to the modem over Ethernet, however, change its settings etc. in my browser. There are solutions mentioned here involving changing the etc/authorization file, but wouldn't that also affect the WiFi if that was the problem?
In short, Ethernet connection to modem works. WiFi connection to FON router and then to the ISP and Internet works. But the Ethernet configuration does't go that last bit, it only works locally. Using that route, I can't connect to the outside world. I have restarted the modem, the computer etc., but that should not be the problem as both works over WiFi, using the same settings for the modem. How do I best troubleshoot this? I am getting an AirPort Express, perhaps it will work better with the modem that the computer itself, but I doubt it.
Info:
Mac mini, Mac OS X (10.7.4), 2.3 GHz Intel Core i5
View 3 Replies
View Related
Apr 28, 2008
I just got a new MacBook Pro, but my wife uses my old 1.25GHz Alum. PowerBook. My MB pro flies, but unfortunately, the wireless ethernet on my old PB is slow as hell. I've got 11+GB of free space left on my hard drive and Safari or Firefox are the only applications I have open. I also have a cable internet connection with wireless through my 1st Gen Airport Express, yet it's still slow.
View 4 Replies
View Related
Mar 15, 2009
I was wondering if it is possible to connect a desktop and laptop computer using apple share or bluetooth to share an internet connection that is connected through an ethernet port on the desktop. My internet company is crap so I need to find a way to cut out the router, which I have to reset all the time to get a normal internet speed.
Desktop is a Mac Pro bought last April, and the laptop is a 12" Powerbook G4. Both have bluetooth, airport, and the newest operating system.
View 4 Replies
View Related
Aug 25, 2009
i share a house with my brother, lucky me He got a PC with Vista in his room. I got a lovely imac in my room. He gets the broadband cable direct into his room. It averages 40 mbps download , 1.67 upload. We use a wireless Netgear router one thats suppose to handle N wireless and i pick the wireless up on the airport extreme in my imac. Unfortunately i only get about 12 mbps download , 1.20 upload, even though i'm only in the next room. We both play WOW online. It works so much better on his PC cos of the internet speed. Could I use a gigabit ethernet connection between the PC and imac, to share the internet and still play WOW independently?
View 1 Replies
View Related
Feb 20, 2010
Is it possible to share the internet through a protected ethernet network on os x?.. and if so, how can I do it?
I'm well aware that I can make a protected wireless network.
View 2 Replies
View Related
Jul 3, 2010
What might be the reason for this? I had to look up my IP address and configure it manually, so I got it to display as "connected," but there is still no internet when I turn off airport.
View 4 Replies
View Related
May 28, 2012
I'm trying to use my Wi-Fi to surf the internet and the Ethernet to log to my LAN Network. Both networks have access to the inernet through different ISP's and both have Wi-Fi modems. I set up the Wi-Fi as my preferred network followed by the Ehternet connection. That way I can surf the web through the ISP that I want and I can see the other computers on the LAN Network. However, when I try to use any of the Network printers of log to the server I can't connect. Can anyone tell me if I have to set up the connections in any particular way? I'm using Mac OS X Lion on a Macbook Pro 13". The server controlling the LAN is a Windows Server 2008 R2.
Info:
Mac Pro, Mac OS X (10.7.4), CPU i5 2.4 ghz
View 2 Replies
View Related
Sep 8, 2010
I have recently had to stop using my wireless router and connect directly from my modem to the WAN port on my computer. However, I can only achieve an internet connection when I direct connect into my PowerBook G4. When I try to connect into my iMac, I get nothing.
View 2 Replies
View Related
Aug 3, 2008
i've recently got the Ethernet adapter for MBA and I am still unable to connect to my home internet connection... It continues to give me a "self-assigned IP".
View 3 Replies
View Related
Feb 22, 2012
I had no trouble getting on line until last week when a message came on that
IP address 192.168.0.139
was in use by
04:0c:ce:54:c1:e5
DHCP Server 192.168.0.1
Since that time, no matter if I plug it into one router or the other (I use a router in my office to share the one ethernet cable that comes down the hall) it claims that the ethernet is working and it knows that it is connected to the Internet,but it cannot access the Internet. IT seems to be stuck in a cycle of navel-gazing, constantly focused on its own ethernet IP address.
All I know how to do is operate the thing; we have no IT person here. A visitor set up our network for us a few years ago. Only the iMac has this problem; my PC laptops go online just fine. But all my work is on the iMac.
View 2 Replies
View Related
Mar 18, 2010
I moved my room around yesterday, and originally my iMac was in the far corner of my small bedroom. After the rearrange, now its on the opposite side of the room, and since then the iMacs internet connection has been unstable. It'll drop, randomly slow down to a crawl etc. My MacBook is fine, and so is my PS3, its just my iMac thats causing havok, all because I moved it from one side of the room to the other. I can't be because I've simply moved the iMac from one side of the room to the other can it? My MacBook can pick up a strong signal from the bottom of the garden, so the iMac really has no excuse.
View 2 Replies
View Related
Sep 10, 2010
I am going to move into a new house soon. I am looking to network the house, so I can use the internet anywhere, share movies,etc. This is my current setup at my apartment.
1 x Mac Mini connected to my TV in the lounge
1 x Apple TV connected to the TV in the bedroom
1 x Main PC in the study room (which all my movies/tv series/music/etc... is stored)
2 x Laptops
1 x Apple 20" Cinema Display
The mac mini is connected via ethernet to the router & the apple tv is connected via WiFi. Its currently a small place so the apple tv can access the router's wireless signal. This is what I have in mind for our new house which kinda big in size. Trash the PC and buy a mac mini server and external NAS storage. The NAS storage will store all the movies/tv series/mp3's/etc. I currently have a ubiquity nanostation2 which I can setup to boost the wireless signal throughout the house so we can use wireless anywhere in the house & tv mac mini, laptops & apple tv can access the wireless (so i do not have to install ethernet cables throughout the house). Also in the future, I would want to install security cameras outside the house (still trying to find a good mac OS X security camera software). Before I buy the mac mini server & NAS, am i missing anything or is there another better solution?
View 9 Replies
View Related
May 16, 2009
Firstly here is my configuration I need help with. My friends windows xp machine has a broadband connection in another part of the house. My iMac connects to this wirelessly via a WiFi dongle. I also have a windows xp machine networked to my iMac via a crossover cable. I would like to be able to have my xp box connect to the internet by perhaps accessing the wifi dongle on my Mac. I know I could just purchase another dongle and do it that way, easier but would defeat the purpose.
View 1 Replies
View Related
Nov 5, 2007
I recently did a clean install of leopard and then migrated my account back on to my MBP non-santa rosa 2.33. Now, when I attempt to internet share from my ethernet to computers using airport, they are able to see the network, connect to it, and put in the password, but internet fails to connect. I'm on a college network, but this shouldn't really matter since I currently have a network of this type working perfectly on an iMac running Tiger. The signal reads at full strength and behaves just like it should, just it doesn't allow an internet connection. No firewall is on.
View 10 Replies
View Related
Mar 19, 2007
I have a non-fixed IP with BT for my home network and am curious if I can set things up to access my home machines and volumes when I am abroad. A step-by-step guide to this process would, no doubt, be useful to a number of MR members. If there is a kind soul who could post an idiot-proof set of instructions that would be great, and would perhaps be put up as a user guide here at MR.
View 5 Replies
View Related
