OS X V10.6 Snow Leopard :: IMac Will Not Accept A CD In The Side Drive?
May 7, 2012
My iMac will not accept a CD in the side drive. There is no CD in the drive currently. I tried the eject button on the keyboard just to make sure and nothing has ejected.
I followed Roger Wilmot's clear instructions to migrate to iCloud using Snow Leopard: [URL]
But having set up the account, iCloud in Apple Mail will not accept the password. I have checked, and the password is the correct one, which gets me into MobileMe correctly. I have not deleted my MobileMe mail account, and that is still working properly, and accepting the password. The password is a new one, which complies with 8 characters, at least one capital, and at least one numeral.
I'm having problems with mac mail. It won't accept my icloud/ mobileme password. So I'm unable to get my mac email on mail... It was working fine for years, no suddenly not...
I've got several items in my side bar that I can't get rid of. I've tried the CMD-drag and they won't go away. I've also tried deleting from the user library com.apple.finder.plist to no avail.
Info: iMac, Mac OS X (10.6.8), 27" 2.7GHz Intel Core i5 4GB/1TB
there is a file stuck in the side-bar at the finder window. Cannot get rid of it. Probably is a deleted file. Left clik or Right click doesn' t appear to do something except of showing the message "Open Sidebar Preferences".how can i throw it out?
I have a 3 year old 24" iMac (see sig). I recently discovered the optical drive is not working any more. It won't accept any discs and just spits them out. Two questions:
-I assume the drive can be replaced somewhere like the Apple Store. Does anyone know about how much that would cost?
-Are there any alternatives to replacing the internal drive, like buying an external desktop optical drive? If so, what's a good one to get?
I'm looking for a comparison between all iMac processors. I believe that the only processors used for iMacs have been G5, Core Solo, Core duo, Core 2 Duo, Core i5 and Core i7. If I'm missing something let me know.
Supposedly, the new 27" iMac supports 2 side-by-side safari windows perfectly. However, on mine, they overlap by about 3 inches and if I drag the 2nd window to the right, it does not entirely fit without adjusting the width of one or both windows.
Is there a way I can optimize Safari (or the iMac display settings) for the 27" iMac display so that by default each window takes up exactly 50% of the screen width and a new window will sit perfectly side by side?
I have installed my hard drive from a previous but terminally I'll iMac that was running Snow Leopard into a Sata to USB enclosure. This is displaying on the desktop of my new iMac running Lion as an external Hard drive,also system preferences sees it as a start up source.My question is , is it safe to restart into Snow leopard without causing a kernel panic and if it does boot will it be fast enough to use as it as a USB drive.
I have a HITACHI touro desk 3TB external hard dive connected to my iMac OS X version 10.6.8 Every time i start up the system it stays on a grey screen until I unplug the usb of the external hard drive then the system boots up normally. I have tried connecting different usb cables, plug in to different usb ports, and nothing works. I have other external hard drives and they don't give me any problems. is a pain plugging and unplugging the usb cable.
I have a Snow Leopard Install Disk for the 13-inch Macbook Pro model.I also have a 21-inch iMac. I have OS X Lion installed on both. I have Snow Leopard installed as a partition on my Macbook Pro, which I installed via the install disk. I want to do the same thing for my iMac but I am unable due to (seemingly) my install disk is for a Macbook Pro and not for an iMac.
The internal hard drive on my early 2009 iMac is being replaced but I have to reinstall Snow Leopard myself.I did search in MRoogle and at Apple and cannot seem to find instructions on how to perform a clean Snow Leopard install on an iMac internal HD.
Can I do this? And if so how? Or do you think I should try and install Leopard on the existing Hd in the iMac? I still have these discs but have to get the SL applications install disc out of my drive (it's stuck and the iMac won't boot past the blue screen).
So I bought a 2tb external drive to save space on my main drive - I copied all my movies and have been dropping a bunch of mini dv tapes onto it - but when I open the drive none of them show up
When I get info in disk utility I get one that shows I have avaialble 1.99TB of 2 TB - and right below it says 890 MB are used - don't get it
Tried the disk utility and it says they are working fine .... repair did not seem to do anything
I am using a 2006 Intel Xserve (10.6.8) at home for storing lots of multimedia. My 2 TB user drive, which is inside of one of the Xserve's drive caddies is nearly full. I purchased a $157 3 TB Seagate Barracuda (Model No. ST3000DM001) from Amazon and put it inside the caddy. It is not being recognized at all. Looking around for solutions I am getting a hint that trying to restrict the data rate to 1.5 GB/s might help, which is documented for some of Seagate's older SATA drives, where one puts a 2-mm jumper clip on a header next to the SATA connector. This 3 TB model has the same header, but the manual only speaks of data rate autonegotiation. I'll be able to try out the drive with the jumper clip in place tonight and will report back. Curiously, in my Thermaltake USB-2 interface (toaster style), Disk Utility shows the drive as "801.57 GB Generic External Media," which is being discussed in a Leopard Server discussion thread. Last I saw, there was no good explanation for this symptom.
Info: Xserve, Mac OS X (10.6.8), Apple has made quite a bit of money off me over the years.
The last time I used my cd drive was a couple months ago to burn a cd.
The cd didn't come out so I followed the steps to eject it and it came out properly. Since then I haven't used the drive until recently. When I went to enter a cd to burn some songs onto it, the drive wouldn't accept any discs. As if there was something in there but there is nothing.
some steps to get my cd/dvd drive to accept discs again please?
I have a problem with my Macbook Pro 17 inch...whenever i try to insert a CD the drive wont accept it, also when i press the eject key there is no eject emote that appears on my screen!
When I turn on my MacBook,Mac osx pops up and asking for my password but it won't accept it.I need to get out of the page but how? Even when i insert the disk i' the same way.
I just got off the phone with Apple support and I was told I should bring in my iMac to an apple store to get it checked out. However, I am EXTREMELY busy. So in the meantime I was wondering if anyone could help fix this issue: I have a brand new iMac literally purchased a month ago, 21.5", when I insert a disc it keeps it for about three seconds and pops it right out, the disc does not even register with my computer. Is there anyway to fix this without having to go all the way to the Apple store (I don't own a car).
I have an imac with leopard OS and a macbook pro with snow leopard on it, and I can't seem to connect the two computers. Even when they are directly connected with ethernet cable, I can see the imac but not connect with it. I can connect to the macbook from the imac, but not vice-versa. My network is ethernet through linksys WRT610 router. Repeated attempts to connect from the macbook result in "connection failed" message and "imac may not exist or is not available."
I just tried to play a legit DVD and it won't play. It accepts the DVD, spins for a bit then spits it back out. I've tried several ones. All legitimate dvd's (not burnt ones) and none of them work. I've played DVD's on here before.
We have two Mac Laptops, 1 is the little white Macbook, the other MBP. We have DSL coming in and then thru a 2wire modem then thru the Airport. The 2 wire modem is connected to a PC. All of this sits about 40 feet from the bar where we use the laptops and is a straight shot.
My problem is that the the newer MBP is stuck in the mud when it comes to connecting, and then holding any type of signal strength with the wireless signal.The older little white MB works great, every bar on the wireless icon is black, on the other (as I type this they are both on and side by side..) only has one.
When pressing Alt/Option and clicking on the wireless icon the good computer shows a transmit rate of somewhere between 20 and 26 when I have checked it several times this morning, the bad one has never been above one.It seems for the price I paid for the Airport Ex. BOTH of these units should be getting full strength signals.Ever had this problem? No of any possible solutions?The fact that the slow one is my wife's machine doesn't make life any easierI figure before I make an Apple reservation I could do a little research myself.