OS X V10.6 Snow Leopard :: Cannot Connect To Safari
May 14, 2012I cannot use safari. What steps should I follow to enable it again?
Info:
iMac, Mac OS X (10.6.8)
ADVERTISEMENT
OS X :: Snow Leopard Does Not Allow Me To Connect To 802.11n Networks?
Sep 4, 2009I have an Airport Extreme card with the Atheros AR5416 chipset in my Mac mini (late 2007 rev.) and it worked perfectly in Leopard.
I could connect to my roommate's Airport Extreme just fine on its 802.11n network. But with multiple tries installing Snow Leopard it just has not worked to connect to that same network.
Despite the antenna only being connected to the connector for 5GHz networks, I can connect only to 802.11g (2.4GHz) networks but not 802.11n (5GHz) networks.
If the network card was defective I would expect Leopard to have similar issues but it was rock solid. Right now I am using an Airport Express as a bridge through ethernet to get internet connectivity.
This is something I fully expect to deal with in Linux or even Windows with old drivers, but certainly not on Apple's own OS on their own hardware.
Has anyone else had similar issues with Snow Leopard? Whether you do or not, what chipset does your Airport Extreme card use? You can get this info from Apple menu -> About this Mac -> More Info -> Airport -> Firmware version.
From what I understand, Apple is still using both Broadcom and Atheros chipsets in their Airport cards, so I'm curious to see if it's an issue with Atheros chipset drivers in particular.
OS X V10.6 Snow Leopard :: How To Connect Speakers To Mac Pro
Feb 11, 2012I can not get my speakers to work.
Info:
Mac Pro, Mac OS X (10.6.8), Headphones work/ext spks do not wor
OS X V10.5 Leopard :: Safari / Firefox Can't Connect To Facebook
Jun 12, 2012In both Safari and Firefox, I cannot get certain website In safari I get this error message: Safari can’t open the page “http://www.google.com/” because the server unexpectedly dropped the connection. This sometimes occurs when the server is busy. Wait for a few minutes, and then try again. I have tried several different DNS providers (8.8.8.8, 8.8.4.4, 208.67.222.222, 208.67.220.220) with the same results. I looked at my host file and it is unaltered. I'm running updates now, but don't think that is the issue 9I'll know soon). All the other mac and PC computers on this network are working just fine and get to the sites with no errors.
Info:
iMac, Mac OS X (10.5.8)
OS X :: Fix For Juniper Network Connect Under Snow Leopard
Aug 29, 2009Likely not useful for most of you - but for anyone who happens to use Juniper Network's Network Connect app for ssl VPN access, here's how to fix post SL install. Apparently, SL messes with perms and removes the 'Frameworks' dir.
[URL]
Code:
sudo chmod 755 /usr/local/juniper/nc/[version number]/
sudo mkdir '/Applications/Network Connect.app/Contents/Frameworks'
Tested, works like a charm.
OS X :: Windows Can't Connect To Mac Anymore With Snow Leopard
Aug 30, 2009I was running 10.5.8 on my Mac Pro, and I had file letters mapped in Vista to all of my Mac Pro's drives. Post-upgrade, I can no longer connect to any of the drives -- I can see the Mac Pro in my Network window in Windows, but double-clicking on the Mac Pro results in a password prompt in which no password is accepted. Obviously something has changed on the Mac. I've gone through the Network dialog boxes in 10.6, but can't find any culprit.
View 1 Replies View RelatedOS X Server V10.6 Snow Leopard :: Can't Connect To Internet
Feb 17, 2012Other macs on my network have no trouble connecting, just the macbook pro, so it's not the router or ISP. This laptop previously had no trouble connecting to the internet on this network. It continually says ISP failed (airport, airport status and network settings are all green). Laptop running 10.6.8. I tried turning Configure IPv6 off, no change.
Info:
MacBook Pro (17-inch Early 2011), Mac OS X (10.6.8)
OS X Server V10.6 Snow Leopard :: Mac Can't Connect To Internet / No IP / No DNS
Apr 1, 2012My Mac Mini Server with 10.6.8 Snow Leopard Server doesn't connect to the Internet.It can connect to the router either via Ethernet or Airport, but it can not get an IP address -- it always assigns itself a random IP address which is not in the correct range for the router.All other devices, including PC, iPhone and iPad can work correctly with the router.When I manually typed in the router's IP in Safari, 192.168.0.1, I can see the router admin page. But typing in any external IP nothing shows up.Thinking it might be the router's problem, I used iPhone 4S' tethering tried wifi, USB, Bluetooth tethering and the Mac Mini still doesn't have any Internet connection.I changed the DNS in the Network preferences, trying Google's public DNS 8.8.8.8, my ISP's DNS, and empty DNS.
View 7 Replies View RelatedOS X V10.6 Snow Leopard :: Macbook Pro Won't Connect To Wifi
Apr 9, 2012I have a MacBook Pro running 10.6.8 and we got wifi at the house this afternoon. It will not connect, if I open network diagnostics the top four lights are green, internet and server are red. There are two other macbooks in the house(at least one also running 10.6.8) and two ipads, all of which connect with no problem.
Info:MacBookPro, Mac OS X (10.6.8)
OS X V10.6 Snow Leopard :: How To Connect MacBook Air To A Monitor
Jun 9, 2012How can I connect my MacBook Air to a Monitor. Is there some function button to use?
Info:
MacBook Air, Mac OS X (10.7.4)
OS X :: Using Snow Leopard With Juniper's VPN/unable To Connect To Network?
Aug 28, 2009I updated to Snow Leopard and now have problem with Juniper VPN. A network connection cannot be created. Does anyone have the same problem?
View 5 Replies View RelatedOS X V10.6 Snow Leopard :: What Port Does Finder Use To Connect To Shared
Apr 8, 2012I am able to see my server shares when I connect my bacbook pro via cable, but when i connect via wifi the network shares are not visible. a windows laptop connecting over the same wifi router can see the server shares. Does OS x 10.6 use a different port that I need to open on my wireless router?
View 1 Replies View RelatedOS X Server V10.6 Snow Leopard :: Cannot Connect To Sever Websites
Apr 28, 2012I am running multiple services with the latest version of OS X 10.6 Server on my MacMini (web, mail, ichat, address book, etc.) . When I try to open my websites I get an "unable to find sever message". Everything has been working fine for the last 2 years and no changes have been made to the server settings, ISP, or DNS. All other services are working as they should. The server is hooked up to an Airport Extreme via a cable modem with a static IP. I have tried the following thus far:
1) restarted the server, airport extreme, and cable modem
2) checked the DNS via the web and my site addresses are pointing to my static IP address
3) turned Web services off and on again in Server Admin
4) checked the Airport port mapping to make sure Web Service (Port 80) was still open
Info:Mac mini, Mac OS X (10.6.7), Server
OS X V10.6 Snow Leopard :: Can't Connect To Sharepoint Server After Updating To 10.6.3
May 29, 2012I get this message "The operation can’t be completed because the original item for “______” can’t be found." every time I try and connect. I've never had this problem before updating. I'm currently running the latest firmware for my server, and have restarted both the server and my iMac.
Info:
iMac (17-inch Late 2006), Mac OS X (10.6.3)
OS X V10.6 Snow Leopard :: Can't Connect To Sites Folder Server
Jun 14, 2012I've just enabled Web Shareing, I think for the first time, on an old Powerbook G4. From the links in the System Preferances panel, I was able to see the 'computer' web site, but not the 'personal' one. Taking the problem to be that described in [URL], I followed the instructions in [URL]
Rather than the 403 I was getting, I now just see 'Safari cant open the page [URL] because Safari cant connect to the server macintosh.lan.'running the apachectl configtest commend. I did that, and got the following:
/usr/sbin/apachectl: line 73: ulimit: open files: cannot modify limit: Invalid argument
Syntax error on line 1 of /private/etc/apache2/users/James.conf:
Invalid command 'James/Sites/"', perhaps misspelled or defined by a module not included in the server configuration
how to get the sites folder running?
Info:
PowerBook, Mac OS X (10.5.8)
OS X :: Citrix Web After Snow Leopard - Unable To Connect To Office Network
Sep 2, 2009I use Citrix Web to access my office network. It was working fine on my iMac for several after I installed Snow Leopard. But today, I'm getting an odd error message. I log in, and then a box pops up that says I need to make sure that the remote server is listening on Port 1494. I am not able to connect to my office network. Has Snow Leopard changed anything so that another program is using that port? I have not upgraded my Macbook yet and I was able to connect, so I don't think my office network is the problem. I have tried Safari in both 32 bit and 64 bit, and I've tried more than one Citrix client. So there must be setting on my computer I need to change - if I could only determine what it is.
View 11 Replies View RelatedOS X :: Snow Leopard Not Connect To ANY Wireless Network/connection Failed
Sep 12, 2009I have one of every type of the newest Macs: MacBook, MacBook Pro, MacBook Air, iMac, Mac mini, Mac Pro. Since upgrading them to Snow Leopard, none of them will connect to any wireless network -- regardless of the router (AirPort, Linksys, Cisco, etc.) and regardless of the type of security (open, WEP, WPA, etc.).
Every time I attempt to connect, I get the message that the "connection failed." Here's a 20 second screen recording of what's happening.
OS X :: Upgraded To Snow Leopard/can't Connect To Router Or Any Wireless Network
Feb 8, 2010After extensive Googling, I need to take a break, and find out if someone with more experience knows what I can try next...
I'm not the best when it comes to Networks, or even router configuration. I'll just put that out there, in case I've missed something obvious.
My router connection (DLink 2640B) was working perfectly fine before I upgraded to Snow Leopard. Now I cannot connect to any wireless network, and I cannot connect to the router administration page, either
(192.168.1.1).
The internet connection still works fine on two other laptops. Also, I can connect this iMac via the ethernet cable.
I've tried deleting the files NetworkInterfaces.plist, com.apple.network.identification.plist, and preferences.plist; I've tried rebooting my router; I've tried creating a new network. Airport sees all the networks, tries to connect, then it just says that it fails.
Applications :: Juniper Network Connect Supports Snow Leopard?
Feb 14, 2010Does anyone know if Juniper Network Connect supports Snow Leopard? I can't find any info on their website, but maybe I'm just looking in the wrong spot(s).
View 3 Replies View RelatedOS X V10.6 Snow Leopard :: What And Where Is The Preference File For This Connect To Server Dialog Box
Apr 16, 2012When logging in to a remote server via Go/Connect to Server a dialog box comes up on restart with bad username info. No matter how many times I attempt to correct the info it always retains the bad user name. What and where is the preference file for this connect to server dialog box?
View 1 Replies View RelatedOS X V10.6 Snow Leopard :: Bonjour Printer Not Detected, LPD Fails To Connect?
Apr 17, 2012Trying to find a solution to my printing issues, which have taken many forms over the years. The current frustrating gremlin: Macbook Air, OS X 10.6.8, Lexmark E250D laser, printer driver built in to Mac OS, driver .dmg also downloaded and installed from Lexmark Wireless home network on NETGEAR router with extension to Airport Express. Lexmark E250D laser attached to USB on the Airport Express. Cannot add printer via the default pathway, the Bonjour system finds the printer correctly for about 5 seconds after the printer is plugged in to the AE USB port then it simply disappears off the window never to return. Airport Utility cannot find the AE which I recently reset and set up without problem. The AE light is green.
Via Network Preferences I find the IP of the AE and try to set up LPD printing. This successfully finds the Lexmark, calls it a Generic Postscrpipt until I select the Lexmark driver from the OS X list. It seems to correctly identify printer features such as in built memory and duplex printing. Sending a file to the printer results in the warning that the IP address is busy. In the past I simply connected by USB cable to the printer, but since a recent move the house/ office layout makes that very inconvenient. I have to go outside and downstairs to the office which has no internal access from the main part of the house.
Info:
MacBook Air (13-inch Late 2010), Mac OS X (10.6.8)
OS X V10.6 Snow Leopard :: AirPort Options Grayed Out - Cannot Connect To WiFi
Jun 7, 2012Airport options greyed out - I want to connect to internet wirelessly but it can't see airport???
Info:
PowerMac, Mac OS X (10.6.2)
OS X V10.6 Snow Leopard :: Can Connect A Mac Running To Windows Small Business Server
Mar 31, 2012I'm running the OSX 10.6.8 and want to connect to applications running on Windows Small Business Server 2008. Is this easy or difficult or impossible?
Info:
Mac Pro, Mac OS X (10.6.8)
OS X V10.6 Snow Leopard :: Connect A Wireless-capable Printer To Airport Network?
Apr 8, 2012Lexmark 4310 series printer will not print after printing first job after setup. Msg in printer window says printer not connected however the green light is solid on the printer. Lexmark tech support says the issue is with comcast router. Comcast says issue is mac related because both macs fail to print while HP machine works fine....
Info:
MacBook Air, Mac OS X (10.7.3)
OS X V10.6 Snow Leopard :: Connect Wireless Keyboard & Mouse Without Nano USB Receiver?
Apr 13, 2012Being that most Macs have built-in Bluetooth connection capabilities, does anyone know a way to connect 3rd party wireless keyboards & mouses without using the Nano USB receiver? There has to be a way to do it, isn't there?
Once I have enough money saved up and can afford a wireless Apple Keyboard and Magic Mouse, I'm stuck with the GE setup that I currently have.
Info:
MacBook Pro, Mac OS X (10.6.8), 17" Intel Core 2 Duo 2.4GHz 4GB RAM
OS X :: Safari Won't Run In Snow Leopard?
Aug 30, 2009I've tried Software update and am currently googling around to try and find a fix. but so far all I have been able to do is take a screen shot showing the error I get when I try to launch safari.
View 2 Replies View RelatedOS X :: Snow Leopard Ethernet With Safari
Sep 4, 2009I just installed Snow Leopard on my iMac and have experienced an ethernet problem with Safari, Firefox, Mail and Thunderbird; these applications work for about 1 hr. and then the applications will lose the ethernet connection even though System Preferences/Network shows that ethernet is connected. However, Skype works (no connection loss) while the aforementioned applications have lost their connections. This problem keeps recurring intermittently (approx every 1hr.
As a work-around to the problem, I go into System Preferences/Network/Configure IPv4: choose OFF in the drop-down, click on APPLY. Then in the same drop-down, select "Using DHCP", click on APPLY and wait for an IP Address to be reassigned. After this procedure, the applications that lost the ethernet connection will start functioning again. I am using a Linksys Router, DHCP with a 1 giga-bit connection, CAT5.
OS X :: Safari Won't Open With Snow Leopard / Fix It?
Sep 13, 2009I downloaded the latest Safari version and when I try to install it on Snow Leopard, I get a message saying that I must have OSx 10.5.8 or later. I'm confused because I have 10.6 installed.
View 2 Replies View RelatedOS X :: Can't Download From Safari On Snow Leopard / What To Do?
Aug 27, 2009Is anyone else having this problem? i go to download a program or file and it just takes me to a blank page. I can download fine with any other browser, i.e. Firefox, Camino, Shiira.
View 8 Replies View RelatedOS X V10.6 Snow Leopard :: MANY Of The Images Within Safari Cannot Be Seen?
Feb 5, 2012MANY of the images within Safari cannot be seen. MOST work, but this site doesn't: [URL]I checked Safari Preferences and Java is enabled.
Info:
MacBook Pro, Mac OS X (10.6.8), I erased OSX 10.7 'cause it slowed
