OS X V10.6 Snow Leopard :: Mac Pro Rear Usb Sockets Failed?
May 1, 2012
Having tried to initiate a hardware test by inserting a Mac pro system disk and holding the "D" key down, I lost my usb sockets on the rear of the machine so the sysem hung trying to find the mouse and keyboard.
I managed to break out of this loop by connecting both to the front usb sockets and the machine is running as before. Is this permanent damage or is are the rear usb's retrievable ??
Info:
Mac Pro, Mac OS X (10.6.3), 3.0 dual with 4 gig ram
So I have a macbook pro old model.Recent Problems:graphics card failedsystem crashed had to reinstall system crashed again and would be stuck on apple logo now after i reinstalled SL after the stuck on logo problem my mac was fine.3 weeks later which is now it started to lag,slow,unresponsive.So i tried repairing disk utility and FAILED then i tried reinstalling osx FAILEDthen i had to delete my whole harddrive :*( and reformated the harddrive.FAILED AGAIN.calling apple is a no because i already called alot before so now they want to charge.So did i reformat wrong? something?
I have a desktop Mac that I used Migration Assistant to transfer my user setting etc. prior to selling my MacBook. All works well, except that everytime I try to print a document it pauses while looking for a shared network volume for a while before coming back saying "Connection Failed to MacBook". I deleted all printers and resent printers from preferences to add them back manually and repaired permissions however the problem is still happening everytime I try to print a document. Its as though its looking for the old MacBook.
I was running 10.5.8 on both my white MacBook and Intel iMac 20," then I finally received the copy of Snow Leopard which I bought from Amazon. I decided to install it on my MacBook first to make sure the install would be successful before I upgraded my iMac, which has my important work stuff on it. The install was a success on the MacBook and after it was fully upgraded and updated, I simply opened "About This Mac" to verify the installation, opened Safari, browsed around for a minute, then proceeded to check out the new dock and airport menu features. After just a few minutes of playing around with it, I decided it was a legitimate installation, closed the MacBook, left it plugged into the power source, and walked to the other room to begin the upgrade onto my iMac. I left home for about an hour and once I had returned, the iMac installation was complete and it was running like a dream. After messing around on the iMac for a little while I decided to make sure the MacBook was still good to go. When I opened the Macbook up, all I saw was a blank screen. I assumed it was some sort of power-saver issue, because sometimes the screen doesn't like to come on right away when I open it up. My first instinct was to move my finger around on the trackpad and press some keyboard keys, which always wakes it up when this happens. Nothing seemed to be working, so at this point I pushed the power button and it proceeded to boot. As it began to boot I heard some sort of CLICKING from the HD, followed by a flashing folder with a question mark on the screen.
I assumed it was some sort of HD failure so I booted to the Snow Leopard install disk, ran Disk Utility and Startup disk, and my Mac COULD NOT FIND the HD - all it showed was the CD-ROM drive and Network Startup. I tried to reboot a few more times and almost gave up. It kept clicking at startup and I was thinking about the little magnetic arms in the HD. I thought they might be jammed in the HD for some reason. At this point, I didn't know what to do. So, as it was booting up again with the plain grey backdrop, as a last resort, pretending I was the Fonz or something, I physically whacked the area on my MacBook near the power button where the sound of the clicks was coming from. AS SOON as I did that, the clicking stopped and a few seconds later the APPLE ICON appeared... instead of that dreaded question mark folder icon! The MacBook started booting up back to it's upgraded self again! Finally I was back at the desktop, and with a sigh of relief, began typing this forum. Now, my question is WHAT THE @#$% HAPPENED?? And how on Earth did smacking it one actually fix it? Is this problem related to the recent installation of Snow Leopard or just my MacBook dying? (It is 2 years old) If anyone has any ideas as to what caused this, and how I can prevent this situation from happening in the future.
This is the third drive that has failed since I was assigned this Mac Pro at work a few weeks ago, and the drive was purchased less than a week ago. The other two were older drives. They would suddenly stop being readable. Sometimes there was a problem ejecting the drive before it stopped becomeing readable (message would say the drive couldn't be ejected because another program is using it, when there were no programs open). One of them eventually mounted again and I recovered some of the files (but some files weren't readable when I tried to copy them). But that was just luck as they all seem now to be consistently unreadable. When I plug them in I get the message: "The disk you inserted was not readable by this computer". same if I plug it into a different computer. And when I try to repair, it shows this: http://i.imgur.com/ivK9d.png. When it happed to the second drive, I just thought it was a fluke... but now a third, brand new drive? Something about the computer must be causing it.
I lost the main HDD on my Mac G5 running Panther 10.4. I have a TM back up onto an external drive and bought a new internal drive.How do I restore all my files from the external back up to the new internal HDD so I can run my computer as it was.
After multiple updates failed to install on a restart, including a security and Safari update, many applications on my mac do not work.I am receiving error messages such as this: [code] This leads me to believe that multiple frameworks went missing in the failed update; looking in the frameworks folder, the only ones there are iTunesLibrary.framework, NyxAudioAnalysis.framework, and PluginManager.framework. Where can I download these missing framework/fix the problem if there is more too it than that? Finder, system profiler, system preferences all work. Activity monitor shows everything as normal.
Info: MacBook, Mac OS X (10.6.8), Model Identifier: MacBook1,1
I just tried to update my 2008 Macbook from Leopard to Snow Leopard. Install went fine but all of the sudden I got an error message, accompanied big yellow triangle with a black exclamation mark telling me that the install has failed without any further info. I rebooted and Snow Leopard was trying to install again. I thought 'why not' and continued. Then, when I had to pick a disk to install on, my Macbook harddrive couldn't be found. I thought 'screw this I'll stick to Leopard' and rebooted. After that it just stuck on the grey screen with the Apple and the loading animation. How I can fix this or at least save my files?
I have one of every type of the newest Macs: MacBook, MacBook Pro, MacBook Air, iMac, Mac mini, Mac Pro. Since upgrading them to Snow Leopard, none of them will connect to any wireless network -- regardless of the router (AirPort, Linksys, Cisco, etc.) and regardless of the type of security (open, WEP, WPA, etc.).
Every time I attempt to connect, I get the message that the "connection failed." Here's a 20 second screen recording of what's happening.
I have a white MacBook. I tried to update my 10.5.8 Leopard installation to Snow Leopard with the upgrade DVD I just got. Unfortunately, update failed on me. After being noticed by the installer that the update failed, I ended up with a NON-BOOTABLE MacBook, that whenever I try to boot from hard drive, after showing me 30 seconds of the "spinning ball" that indicates activity, shuts down. I tried it like 10 times, same result. What happens if I boot from DVD and try an installation that way? Will it try to upgrade? Will it wipe my hard drive content?
I was trying to update my G5 to snow leopard from leopard 10.5.5 when it said it could not install. So I decided to quit installation and boot from 10.5.5. It started up and reaches the apple loading screen but goes off without reaching the log in screen. I have tried booting from the CD again and resetting the PRAM but it still wont work and continues to do the same
I bought a new drive and need to get my Time Machine files off the old failed drive. I'm sure there are plenty of discussions about this but I can't find any. (I so dislike the new design for the support communities.)The old drive sometimes lets me access TM so I want to take advantage of one of those times to get everything across. I know it is a very slow process if it can be done
Info:Mac Mini 1.83ghz, Mac OS X (10.6.8), Great for a while.
I installed mountain lion an a partition on mac but when I deleted the partition I had to resize, so I did the the error (Partition failed Partition failed with the error: Could not modify partition map because filesystem verification failed).
The OS X 10.6.x Server running Time machine, it runs daily backup to external HD, it is fine, but for couple of days, it failed, is there any logs or message that I can read what is going on? The external HD connected with firewire 800 and it still have enough space, so I think it is not a space problem
This happens frequently lately: "Latest backup failed. Files couldn't be copied on backup-disk because it seems to be Read Only. After I "verify" the disk in Disk Utility, it works for a while, then the same problem. What can I do?
I had tried to write several DVDs and CDs before, and they failed (it turned out to be that they were already used DVD-Rs), but the burn folders for them are still on the sidebar in Finder, as shown in the pictures below. It's not necessary, but I would like to get them off, so is there any way to do it?
I have 4 Discs.Mirrored raid sets One Raid Slice is 'System Mirror'One Raid Slice is 'Data Mirror' There is a lock symbol on all 4 discs. Status is online. I can't delete the raid sets. I can't unmount them. I am the admin but the Disk Utility says "Deleting RAID set failed. Deleting RAID set failed with the error: Invalid Request"
My 2009 MacBook Pro won't at the same socket for long. Charges for a while then I have to move and plug into the socket on the other side of the room. There is still power running through the sockets lamps on etc. and often the charger will show just green. Â
startup banner.JAWBONE UPDATER ERROR: Failed to inspect the lock file '/Users/[user]' (error 2: No such file or directory)."Â Jawbone support writes, "get in touch with Apple Support, so they can help you unlock the file on your Mac.Â
I've read that many people have been struggling to get the rear audio jack their Mac Pro to behave under bootcamp. The issue stems from the Realtek drivers 'Jack Detection' which normally allows windows to detect when you plug in headphones or speakers. On some Windows PC's the Realtek Audio Manager has the option to disable this detection, but the latest drivers don't include any advanced options.
My current speakers aren't built to utilize the rear audio jack on my Mac Pro, they only work with the front headphone jack. Anyone know if the Swan M-10s can run on the rear analog audio port?
I'm out of warranty. I looked behind and it looks difficult to reach in order to replace it. Is there a sound card that I can pop in one of the PCI slots?
The only way my I Mac will turn on after sleeping or shut down is with the power button on the rear. I have a black screen and can get my ID symbols if i scroll the mouse across the screen abd it will beome my grey screen with my symbols and IDs. Otherwise, I have to use the power button.Â
I have speakers plugged into the rear audio output, and headphones plugged into the front. I was wondering if it were possible to have audio play from both simultaniously...
all of sudden I got no sound - shut computer down - restart I had to reset - restarted and sound again - then sound quit and now no sound period outta front or rear RCA outputs
Lately, my Lion operating system had become a little buggy, so much so that it eventually wouldn't allow applications like iTunes or safari to open, they would just sit there frozen upon launch. I've had my computer for about 3 1/2 years now and it's accumulated quite a bit of junk over the years, so I wanted to go back and perform a clean install of snow leopard (I'm not sure that I want to go back to using Lion at the moment).I've backed up all my files on an external, and then wiped my hard disk. Now, when I use the white snow leopard install disc, the installation will nearly complete itself and then I get an error saying "Installation failed".I've gone back with disk utility to verify and repair the disk but disk utility told me that there was nothing wrong and that no repairs were needed.
Info: MacBook (13-inch Early 2008), Mac OS X (10.6)
I tried to upgrade my MacBook from 10.4 to 10.5 but the CD has a problem. The installation failed halfway through and now I can't remove it. I pnly get a blue screen and nothing else. I want to restore 10.4 but can't get the CD out to reboot with 10.4. I'm new to Mac, now on my PC
Lately, my MacBook's been popping-up window after boot that says, "Connection failed. The server may not exist or it is not operational at this time." I don't know what server my Mac is trying to connect to. How/where can I look to see what's trying to connect, and to shut it off from trying at boot?
